Space required on the server vCenter for statistical level increased

Similar Questions

• Separate the Server vCenter for VDI environment?

  Should I install a separate to a new environment of view 4.5 VDI vCenter Server?

  See 4.5 can potentially reach about 3,000 users, although he will start with a pilot and after that start to add users probably a hundred at a time.

  Is our current environment vmware vCenter 4.0 Update 2, although I am considering upgrading to 4.1

  We currently have a small VMware environment with around 30 guests and about 400 virtual machines

  I was thinkng it would be good to have vCenter for our VDI environment running in a cluster in our existing vCenter environment.

  It would be wise to tie our vCenters if we do not have two?

  Any ideas on that?

  Has anyone has expereince with this size VDI environment?

  Thank you!!

  Tom

  I prefer to run a separate instance of vCenter. Our deployment is much smaller than yours, and we run it separate because it isolates environments, allows to plan maintenance and does not affect the two environments, because VMware has fallen behind manufacturing discovers completely compatible with the latest versions of vSphere in the past (e.g. vSphere 4.1 requires 64-bit Windows when composer would not run under 64-bit.)

  Especially in an environment as large as yours, I it would run separately.

• Unable to connect to the server vCenter because the user name or password not valid

  Hello

  I have a VMware View version 5.1.0 installation (704644) and when I try to add additional virtual machines to an existing pool I get the message (cannot connect to the server vCenter because the username or password are invalid).

  I have checked all the instructions below and still failed to add virtual machines

  If you are unable to connect to vCenter Server:

  1. Confirm that a network port exists and is available. For more information, see increase the number of ports assigned to a virtual switch for VMware View (1026014).
     
     
  2. Confirm services VMware View manager are running. For more information, see check which required VMware View Manager services are running (1026136).
     
     
  3. Confirm that the network is correctly configured for use in a VMware View environment. For more information, see in the VMware View virtual desktop network configuration (1026498).
     
     
  4. Confirm that name resolution is functioning properly in your environment. For more information, see audit for VMware View DNS settings (1026017).
     
     
  5. Check that the permissions/credentials are correct for the user of the vCenter server. For more information, see confirm/credentials permissions are correct for user vCenter/vCenter server (1028705).
     
     
  6. Confirm that outcomes of the interaction of third parties do not exist with the operating system. For more information, see the confirmation that there are no questions of third-party interaction with the OS in a VMware View environment (1027466).
     
     The virtual machine, I have already assigned to this pool, I can access. I can access by using the client view and also from the console.
     

  Has anyone else seen elsewhere?

  See you soon

  You have the same problem with other pools?   Have you returned through configuration under the Configuration/servers view vCenter configuration?

• Reinstall the server vCenter Server on x 64 Windows

  Hello

  I reinstall a vCenter Server on the same hardware, because the operating system is Windows 2008 x 86 at the moment and I want to spend to vCenter 4.1.

  I don't want to migrate databases, because it is only a very simple configuration with two hosts in a Cluster of CVS.

  I frist to remove the existing vCenter hosts or can I just add them to the new installation of vCenter? I ask, because I can't delete the hosts in the Cluster without putting them into maintenance mode.

  Thanks for your help.

  Rodix

  You can remove hosts to a vcenter which is part of a cluster.

  I had exactly this scenario last week.

  Everything I did was right click hosts each, once disconnected you can right click again and select Delete.

  This will not affect the virtual machines on the hosts and can be done while online, make sure that there is no current vMotions when you do this.

  Reload the VirtualCenter with the new OS and vCenter. Click Add a host and do the normal procedure.

  In fact it is really unnecessary to disconnect the old vcenter for import into new, because when you add the host it will tell you it is managed by a different vCenter, but you can import it again. I just did it to make sure (in my head :-))

  Tip is to make a copy of the license key from vcenter for you save the trouble to go online and get back again

  Concerning

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate. Thank you.

• Virtualize the Server vCenter

  I can't find documentation of configuration for the server vCenter 4.0 of virtualization.  I have vCenter installed on a physical server now and you want to use the inverter or P2V tool.  I have a new deployment next too and want to know the steps to create the server vCenter virtual from scratch.  There are no official document?

  You should read chapters 10-13 of the Setup Guide:

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_esx_vc_installation_guide.PDF

  It's all there.

  It'll be faster and easier to perform a new installation in a virtual machine rather than P2Ving the existing physical server.

  Dan

• RoboHelp 5 - What is required on the server

  While we build a JSF application and our Trainer told me just some files he said, were made using robohelp5 which must be in our application.

  It's the first I ever heard of robohelp and I was wondering how you deploy these and what is required on the server? I hope it is easier that to install server software, put the files on there and then place links in our pages xhtml of our application, but I'd like to get some info on this.

  Thank you

  Chase

  Hello

  Since you see ALI, BRS, etc., you have received the RoboHelp project files. You must only publish the output files. Look for a folder named! SSL!. What should the output. If you have RoboHelp, you can also open the project by opening the .xpj file. You probably want to use WebHelp output, because it's just a bunch of HTML, JS and CSS files. You can place these files on a web server.

  With respect to the contextual help, which requires some work in your application and in RoboHelp. See:

  http://www.Grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm

  http://www.wvanweelden.EU/RoboHelp/Webhelp/csh

  You will need to work with the writer to get the job of csh.

  Take a bow

  Willam

• VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I'm running the virtual appliance of the trial 5.5.0.20400 build 2442330 on ESXi 5.5.0, 2068190

  While I try to log on to the Web Client, I get this error.  VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I put fallow the steps to disable SSO by changing the webclient.properties line add file and ad sso.enabled = false .    Then on the vCenter Server Appliance, restart the vSphere client service by typing service vsphere-client restart .

  I enclose the reference files.

  All ideas will be useful

  
  

  This answer was simple, all I had to do was remove the # in front of the statement in the file.   and SSO has been disabled after the restart of the service.

• 3407: cannot allocate space to store the property information for global cache

  Salvation of the experts on the issue of a load in ttisql as follows, statement
  
  CACHE LOAD domain_group GROUP COMMIT ALL 256 LINES;
  
  This exception is thrown, and I can't find anything with google:
  
  3407: cannot allocate space to store the property information for the global cache groups because the space in the partition of the temporary data is less than the minimum threshold of 3000000 bytes--of the Member MG2_alone2_1 of the grid
  
  My my_ttdb DSN is configed as follows:
  [my_ttdb]
  Driver=/home/TimesTen/TimesTen/tt1122/lib/libtten.so
  Data store = / home/timesten/data/database / my_ttdb
  LogDir = / home/timesten/logs
  PermSize = 4000
  TempSize = 32
  DatabaseCharacterSet = AL32UTF8
  OracleNetServiceName = amq_915
  
  The result of cachegroups is:
  
  Group cache CACHEUSER. DOMAIN_GROUP:
  
  Group cache type: asynchronous, Writethrough global (dynamic)
  AutoRefresh: No.
  Breeding: LRU on
  
  Table roots: GTLD_WHOIS_TEST. GTLD_DOMAIN
  Type of table: spread
  
  
  Child table: GTLD_WHOIS_TEST. GTLD_DOMAIN_STATUS
  Type of table: spread
  
  The County of gtld_domain table is 3,005 million records in the gtld_domain_status table.
  
  Waiting for your help, thank you.

  According to the error message you need to increase the temporary data partition which is the TempSize setting in your DSN.

  As point of departure set to 1000 and then to monitor it in ttIsql with the dssize command to see if it needs to raise more or may be reduced after a workload has been run.

  Tim

• Where are the best sites for high-level and how information to do different things in Oracle?

  
  Hello

  Where are the best sites for high-level and how information about various things in Oracle?

  Some examples of things:

  * spa

  * spm

  * db replay

  * Resource Manager

  I need a place high-level

  and also a place of step by step.

  For example, I look at these sites:

  www.Oracle-base.com

  www.psoug.org

  Thank you Roger

  Part of the problem is not so much finding sites that have articles on Oracle, that is to find reliable websites with this information.  When I search my site of certification for resources, I find a significant number of people who have 'technical' Articles on Oracle. However, many of these blog posts have simply no useful information.  It is not even that they are wrong so far as article does not include anything that is not declared more clearly and in detail in the documentation.

  That said, a site you have not mentioned above is the Oracle Learning Library.  There very often an excellent material that is very closely linked to the themes of the certification:

  https://apexapps.Oracle.com/pls/Apex/f?p=44785:1:0

• Excel is required on the server of FDM - 11.1.2.4?

  Hello

  I want to know if FDMEE (11.1.2.4) requires yet Microsoft Excel installed on the same server?

  By the matrix Certification Oracle Hyperion (oracle-hyperion-epm-system-certific-131801.xls) I get this info, but it's not not clear to me if it is needed for FDMEE:

  

  Best regards

  No there not need to be installed on the server.

  See you soon

  John

• How update you the server vCenter Server?

  I have a virtual machine in my vSphere environment running Windows Server 2008 R2 that has update manager installed on it and my vCenter Server installation.  After scanning it with the Update Manager, it showed it needed to upgrade VMware tools to match the host and also to modernize hardware virtual machine to correspond also to the host.  I've improved the tools successfully, but when I tried to restore the VM for the hardware, I got the following error message:

  "VM [VM name] has vSphere VMware Update Manager or VMware vCenter Server is installed.  This virtual machine will be ignored for the scan and sanitation. »

  So, how can I get around this because I use this machine virtual also patch/update the other hosts/VMs and this is my installation vCenter?

  Yes, it must be turned off. So your only option in this case is to connect to the host, Vcenter, and then right click to upgrade.  Unfortunately, this is your only option

• Advanced settings of the server vCenter in vSphere web Client 5.1

  Where we can configure vCenter Server Advanced settings in web vSphere Client 5.1. Check the attached screenshot for more information than what I'm looking for.

  http://pubs.VMware.com/vSphere-51/index.jsp?topic=%2Fcom.VMware.vSphere.vcenterhost.doc%2FGUID-62184858-32E6-4DAC-A700-2C80667C3558.html

• A domain on the server vCenter Server installation causes vCenter Server fails to start

  Hi guru,.

  Well I tried for a while, to get my vCenter Server to work with my newly created domain name and at least i did not have much luck. It seems that every time that

  I have create a new domain and restart the system. For the VirtualCenter Server service fails to start on reboot. I checked my odbc connection and test works very well.

  I am able to log in microsoft management studio without problem. But still, the service does not start I understand I can meet here, it's probably a

  with my database permissions issue.  However I can't seem to find the answer by myself if I m hoping to hear some suggestions from all of you who help on this.

  Thanks for the replies!

  Sean

  Uh, you have not installed vCenter on the same server that is running your domain controller you have?

  ADAM and cannot run on the same machine AD.

  If it is installed on the same computer that your DC - get a new machine for VC - this configuration will never work. (minimum supported ram is 3 GB.)

  We see in the newspapers that ADAM is not from, and that's why VC fails to start as well.

  Failed to get all pages of search results: 0xa (a reference was returned by the server).

  Couldn't find OU = container of Instances.  This may indicate a problem with the LDAP permissions for the execution account VirtualCenter, or that the schema is not compatible with this version of VirtualCenter.

  Unable to run the search for the instance

• Remove the server vCenter Server in the cluster

  I wanted to move my server vCenter to another machine.  When I installed on machine 2, he asked if it was a stand alone or make part of a cluster (? not sure if he said cluster but that's essentially).  I chose the cluster.  I moved my machines from the old server to the new server and then uninstalled the old server vCenter.  Now, when I open the vi for the new vCenter Server client, it tells me that the old server cannot be contacted.

  How can I get the old server to stop bothering me?

  Thank you!

  h

  Is there a way to break the related modes, or do I need to uninstall and reinstall my vCenter Server?

  Use "vCenter Server Linked Mode Configuration".

  See the start menu, in case of VMware.

  André

• my window vista sp2 stop sending messages for the server http for e-mail hotmail from July 2010. What other opion should I now? I use window 8. my mother was the first owner of this laptop.

  My lap top is a window vista premium 6.0 sp2. so, as I believe that in July 2010 my connection email expired with the sp2 from window to the server with http hotmail .com I was trying out an important e-mail to a certain Department of the army and he was ejected back because of my direct window a stopover for hotmail http sites. So, what's my next step? This laptop that I use now for academic use belonging to my mother. I was'nt sure of what to click on in the troubleshooting list. Thks.

  Are what the hell you referring in Windows 8?

  Submit all Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/