SPACEBAR not working no no * NO MATERIAL *.

Similar Questions

• SPACEBAR not working not not in Illustrator... Once again

  So, I came across this issue in November/December, my space bar did not have the pan function. It was set last time by running the update (problems with the new Mac OS have been solved). Now... it seems to be back. Adobe, you love, but what gives? Last night, I used the function perfectly well. Now... not so much! Update did not work this time either. It is one of the most frustrating errors to random design itself. Any suggestions?

  Mac OS X El Capitan v10.11

  J,

  If there is no brighter solution, you can try the list (for errors that come out of nowhere) and hope for one of the easiest at the top.

  If the things that must operate simply refuse of (and it seems to be no (other) causes/remedies likely (and watching carefully as you do (all) the necessary things)), you can try the list below.

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes on two 3 ways) and 4) to reset the default preferences (easily but irreversibly with 3) and more laboriously but more completely and also reversibly with 4)), then follows a list of 5) various other possibilities and it ends with a complete reinstallation 6) as a last resort which can be a pretty serious thing. If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  You can see more details here: https://helpx.adobe.com/illustrator/using/setting-preferences.html

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  More serious still (it can be serious because you may need to restore the plugins and whatnot if you've customized things), you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. You can try without step B which is really serious), but sometimes it is necessary, because otherwise things can persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• SPACEBAR not working not

  My space has ceased to function as a shortcut for the hand tool. I tried the command option shift to restart the application. Help, please!

  Thank you, Jane, it is resolved. He had something to do with a virus.

• Reinstalled vista now the modem does not work, says the modem is already in use. Modem does not appear in the material...

  Vista Basic with dial-up. I reinstalled vista and now the modem will not work with any of the numbers given by my provider. He throws error numbers (Sorry didn't write them) and said that the modem is already current usage or other computer is busy. The modem does not appear in the lists of material and reinstallation does not work. The computer does not recognize when a new modem is installed either. I use the same drivers provided with the computer when I got it.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

  It will be useful.

• My SPACEBAR is not working properly

  I had the laptop dell Xps1330 yesterday but my SPACEBAR is not working properly, it is veryhardto sepaerate words, how resolvethis question? They will replace my laptop or how tofix it?

  
  

• With the clause does not work in SqlPlus for DataBase 11 GR 8 1 material

  I have 11 GR 1 database material, when I connect to my database through SqlPlus (version 8.0.6.0.0) this query

  with x as (select * from areas) select * from x;

  does not work. But when you use SqlPlus provided by 11g, this query works well. This query can run on an older version of SqlPlus?

  user12222356 wrote:
  This client software is installed with Oracle developer 6i form. should I remove all the form developer? Latest version of the form developer is available for 11 GR 1 matter?

  Well, you have problems with the developer of forms?

  I wouldn't recommend delete because you have problems with the SQL more customer that goes with it. I recommend to download the instant client and using them for your needs of sqlplus and leaving the rest products installed on your machine only.

• Third party material does not work on iPad 2 Air

  I recently brought an iPad 2 Air, but it was found that some of my third-party devices do not work with it. I also own an iPad mini, so I try the equipment on the mini, it works. I've been worrying is that my iPad 2 Air was a problem of equipment causing it or what. Two iPads running iOS 9.3.1.

  My Equil Smartpen 2, it can connected on bluetooth, but the software does not recognize that the pen was connected.

  My I-Flash Drive have the same problem, the software does not recognize it and hang.

  No matter what iPad 2 Clean Air there have the same problem, or should I send it for repair?

  Denny Lee

  First of all, I would like to try a reset by pressing the power and Home keys until the Apple logo appears.

  If this does not work, I suggest that you visit an Apple store (with all your gear) and ask them to test/diagnose the problem.

  Barry

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• paved tactile and SPACEBAR at the same time do not work

  There are a few games that I play on the pc, but when I use the space bar my touchpad does not work please help

  Update the driver for the touchpad.
  If this solve habit
  It may be a hardware problem. Simply contact the seller your PC.

• My 7 GPS iPhone does not work in any GPS application

  I got my new iPhone 7 last week. Yeaterday was the first day I tried to use Waze to give me directions to an address, but he was constantly telling me that she is looking for the GPS signal.

  I first thought that it is a problem with Waze so I reinstalled, displayed/hidden it's approval of location on and outside Services, but nothing helped. I restarted the phone, even restored (Yes. I have about 2 hours waiting to do).

  But that has not worked so I thought that perhaps Waze is, after all the blame. So I tried also maps from Apple and Google Maps. NONE of them could get my location. And while my position was 'fixed' at Waze, showing me home - Yes, Waze is still showing me the House status even if I am in another city - maps of Apple and Google Maps shows my post to jump around randomly on the map.

  I tried to reset my edge settings, my privacy settings, each of them. Nothing helps.

  Is there perhaps someone who has a solution, or should I go through the pain and try to replace a week later I got it?

  Hi zeusent,

  Congratulations on your new iPhone 7! I understand that you have some problems with it to find your location to several applications. I know it's important to be able to find your way when in a new area, so I'm happy to help you.

  Before you begin, make sure that you have a current backup of your data:

  The backup of your iPhone, iPad and iPod touch - Apple Support

  You've already got a good start with the troubleshooting you have been through. Since you still have questions, it can help to determine whether it is material or not by restoring the iPhone as new. This article has the steps to do:

  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Time Machine does not work after update of the Sierra

  The time function machine my Mackbook Air 2011 stopped working... it has not been saved since update for Sierra, it only take screenshots every hour, it will perform a backup is no longer on my external HD as before.

  There is no problem with the way it is implemented or the hard drive, it's me that my iMac is working perfectly since the update for Sierra and it's backup via the time machine on the same hard disk.

  It is a hard drive and put in place I was in use for about 5 years with no problems.

  Also since the update for Sierra I noticed that my MacBook Air gets hot and the fans go wild, although there was nothing or performance other than the system is auto.

  I lost the use of my built in camera after the update to El Capitan, and now I've lost the use of time machine... I was wondering if I should go back to Yosemite that everything worked well then!... is this possible?

  Thanks for any help with this!

  Update:-just so you know, time machine is to find the back up ok drive (external hard drive), it then goes to "preparing backup" and that's all, he remains in this preparation save the scene for centuries, after a while it just stops and it is saved all... nothing!

  Also noticed when I checked in Time Machine full backup I have before update for Sierra disappeared, he disappeared, been deleted... I don't know what is happening with it!

  Overall since the update for Sierra my MacBook Air did not work properly, in addition to all that Safari does not load, just to get the wheel spinning, and now (with the demise of my old back ups) it seems I can't go back to a previous state.

  My Mackbook Air took it!... the last update took the camera and really Sierra in... material not compatible with all new software, none of the new features work on my iMac or MacBook Air (only Siri), so a useless upgrade for me really, wish I didn't!

• It did not work on Macbook white 2010 or 2010 MacBook pro installed in El Capitan and Yosemite respectively y at - it something special for these releases?

  Apple hardware test does not on macbook pro or macbook, 2010, 2010. Both run 10.1 and 10.10, respectively. Wielding D in power does not launch apple hardware test as advertised. s he is weaned something special to do?

  Thank you

  Alex

  For versions of model before 2013 diagnostic test uses a different method.

  Two different media cover aspects There are reasons

  Why the AHT vs diagnoses may not work in some models of the year of construction.

  And with specific systems, the recovery partition (or lack thereof).

  • With the help of Apple Diagnostics - Apple Support

  For computers shipped with OS X 10.7 or earlier, the test is on the

  Press Kit of included system disk; If you start from there to run the test.

  • With the help of Apple Hardware Test - Apple Support

  • Finding material defects: explore Ardourel & Apple Diagnostics

  Before you run AHT /Apple Diagnostics. By controlling both the software and

  distribution of material for its systems, Apple is able to optimize the two halves to work...

  http://computers.tutsplus.com/tutorials/finding-hardware-faults-exploring-AHT-AP ple-diagnosis-mac-60456

  There are some methods and ideas in the articles above.

  A reason for the question, you face, is the vintage material & macOS they shipped with.

  Good luck & happy computing!

• Flash does not work in FF26, it works in Chrome and IE. I reinstalled FF and Flash several times. I can't adjust the setting of local storage for Flash either.

  Flash does not work on some web sites. I never had a problem before with flash on FF in the nearly 15 years that I've used FF. Recently it has stopped working for some reason any and on some flash sites does not, NHL.com and site of kid Herotopia being just two of them. I updated FF, Adobe flash, the reinstalled version them repeatedly deleted all the files that have been stored on my laptop; that is, profiles, saved favorite nothing that I could find in user accounts and in the local app, low local and roaming data folders. What is strange, is that I can't set the local storage for flash either. When I visit the Adobe site to view the Adobe Flash Player Settings Manager I can move the scroll bar, but cannot check the: allow third-party flash content to store data on your computer. I can't do it on a Web site where the flash does not work. When I try and it changed on any site that it goes back to zero. Not sure if it is a part of the problem. I got tired of many suggestions on the pages of material here, but nothing works. I even tried this http://forums.adobe.com/message/4566499#4566499#4566499

  The other strange thing is that I used to get the "warning: script does not" prompt that displays "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. "sometimes when I would buy on Macy's.com. This is the only site that it happened.
  I know I have only little technical knowledge, but I have tried to figure this out for a few days and do not know what is happening. The only thing I can think is that I somewhere files corrupted causing this problem. I have just updated to Windows 8.1 tonight in the hope that can help, but nothing helped. I would be very disappointing if I couldn't use FF or must go back using Chrome and FF.
  Sorry for the posting long but no solution would be much appreciated.

  Hi jscher2000,.

  Yes, I followed essentially the: Manual steps: https://support.mozilla.org/en-US/questions/968190?page=5#answer-509209 you have posted.

  And after restarting Firefox, Flash worked. Thanks again for your post I could not find this solution on the Adobe forums until you have posted the link.
  Your expertise and your time is much appreciated.

• iPhone iOS 9.3.2. Microphone does not work in some applications.

  MIC on iPhone 5 has stopped working.  Software not hardware.  First noticed when the other party could not hear me on a phone call.  Incoming or outgoing calls - hear the other party, but they don't hear me.  Voice memo does not work... doesn't detect any sounds.  Voice memo and calls work when headset inserted.   HOWEVER, Siri and voice command work very well without a helmet.  Therefore Mic works = no material.

  I have reset all settings - off one - there is sufficient space free etc etc.  Wanted to ask this forum for ideas before the reset complete of your data.  I see that there are problems with the iOS updates.  Not sure on the timing of the question as the phone is used by my 12 year old son.

  Any suggestion is appreciated.

  Hello donbisset,

  If the microphone on your iPhone 5 does not work correctly, follow the troubleshooting steps in the resources below.

  Get help with microphones on your iPhone, iPad and iPod touch

  Take care

• Pavilion 15-ab216nz: f1 - f12 function keys do not work

  Hello

  I shot this Pavilion laptop 15-ab216nz to win 10 to Win 7 64 bit.

  The function keys f1 - 12 do not work - what is missing?

  Thanks for the support

  The problem is resolved. Thanks for your reply.

  As the function keys have 2 different functions:

  (a) Act in accordance with the operating system (release e.g.F3, F5 reload, etc.)

  (b) Act as specific function of material (e.g. dim or bright the screen, increase or decrease the volume)

  (Usually one) is the default (without the combination with the 'fn' key) for b) to use the "fn" EHF.

  This computer works on the other hand, I discovered. There is no need to install the software.

  Kind regards