Spaces in the domain LDAP OR

Similar Questions

• px12-350r unable to join the domain - what now?

  Hi all!

  I hope you can give me some advice because at the moment I'm in a really silly situation, being probably locked out of my Iomega px12-350r.

  Here is what happened:

  * The device was successfully linked to my domain name Microsoft AD and worked with this config at least a year.

  * I expanded the storage matrix, 2 days adding 2 drives. Everything went well and the end of the expansion, the new total disk space is displayed correctly in the web administration interface.

  * After this, I restarted the device. After the reboot, I couldn't connect to the device more using my domain account. This account had administrative rights on the NAS and I connected on the NAS using this account before.

  * I don't alter the domain infrastructure.

  * I know that the device cannot join the domain more because I enabled e-mail notifications and he continues to send me "unable to join the domain".

  I have already tried:

  * Connection using the usual accounts: doesn't seem to work once the device is connected to a domain.

  * Connection via SSH. Does not work, probably for the same reason as above.

  I wasn't yet:

  * The user manual mentions reset the admin password by pressing the reset on the back button. But this will only reset config (I'd be okay with it), or it will erase the data on the drives as well?

  I'm from the Germany. Despite having purchased a service plan 24 x 7 hotline support German will only redirect me to the hotline American which claim to do only office, no SIN px12. I'm kinda in the middle of nowhere now. ;-)

  Thanks for your help!

  Best regards

  Florian

  Hi André,.

  I fixed it without reboot - by chance.

  In a desperate attempt, I tried to connect using the domain administrator account - and it worked! I don't remember giving any px12 admin permissions to this user and I certainly don't connect to the device using this user before. But the account has permissions to create computer accounts in the ad, and in the moment when I logged in the computer account of the AD px12 updated password.

  I tell myself that the px12 has used the account admin for re - joining the domain. From the web interface, I could now do a sync AD and after that, all users of domain reworked.

  So, if anyone has the same problem, try connecting the device with any account that has administrative rights on the whole of the field, even if you have not used the account on the device before. It can work for you, too.

  Local accounts still do not work. I think that if the device is connected to a domain and the domain link is broken permanently, so it's only the reset button.

  Andrew Merci for your support!

  Best regards

  Florian

• Errors, addition of Win7 workstations to the domain

  Greetings!

  I just started one already existing, although that paralyzed, installation of Windows Small Business 2011. Active Directory seems to be set up correctly, and I have no problems connecting to shared folders or devices by using the credentials of domain.

  However, when I started to unroll the field to the client workstations, I get the following error:

  

  I changed the map IPv4 settings to use the DNS on the PDC with the installation of Active Directory, but still no luck. I suspect the problem may lie in the search box on the DNS forward and as such have copied the text of output of dcdiag.exe/test: DNS:

  Directory Server diagnosis

  Perform the initial configuration:

  Trying to find the server at home...

  Home Server = BAF BAF in SR-1

  * Identified AD forest.
  Made the initial collection of information.

  Make the required initial tests

    
  Test server: Default-First-Site-Name\BAF-BAF-IN-SR-1

  Commencement of the trial: connectivity

  The host 883eda9b-b3d2-44e2-b2cd-c2df4c0241a6._msdcs. BAFF.local able

  not be resolved to the IP address. Check the DNS, DHCP, server

  name, etc.

  Received the error checking of LDAP and RPC connectivity. Please check your

  the firewall settings.

  ......................... BAF-BAF-IN-SR-1 failed test connectivity

  Primary testing

    
  Test server: Default-First-Site-Name\BAF-BAF-IN-SR-1

    
  Commencement of the trial: DNS

          

  DNS tests are running and not hung. Please wait a few minutes...

  ......................... BAF-BAF-IN-SR-1 failed test DNS

    
  Running partition tests: ForestDnsZones

    
  Running partition tests: DomainDnsZones

    
  Running partition tests: schema

    
  Running partition tests: Configuration

    
  Running partition tests: BAFF

    
  Running tests from the company: BAFF.local

  Commencement of the trial: DNS

  The test results for domain controllers:

             
  DC:-BAF-BAF-IN-SR - 1.local

  Domain: BAFF.local

             

                   
  TEST: Basic (Basc)
  Error: No LDAP connectivity
  WARNING: adapter

  Intel (r) [00000007] 2-82566DM Gigabit Network Connection has

  invalid DNS server: 192.168.1.175 (BAF-BAF-IN-SR-1)

  Error: all DNS servers are invalid

  No host record (A or AAAA) not found for this domain controller

  WARNING: no DNS RPC connectivity (error or Server non Microsoft DNS is running)
          
  Summary of the test results for DNS servers used by the domain above

  controllers:

          

  DNS server: 192.168.1.175 (BAF-BAF-IN-SR-1)

  1 break on this DNS server test

  Name resolution does not work. _ldap._tcp. BAFF.local. failed on the DNS 192.168.1.175
                
  Summary of the results of the DNS test:

          
  AUTH, Basc, Forw, Del, Dyn, RReg, ext.
  _________________________________________________________________
  Domain: BAFF.local

  BAF-BAF-IN-SR-1 PASS FAIL n/a n/a n/a n/a n/a
          
  ......................... BAFF.local failure test DNS

  Any help that can be provided would be appreciated. Admiteddly, this is my first DNS configuration completely on my own, so the error could be very obvious at this point.

  Thank you very much!

  Hi James,

  Thank you for your detailed answer, I appreciate your efforts.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your query in the TechNet Forums, since we support detected for the same thing:

  TechNet: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads

  Thank you for your understanding.

• Unable to join u1 VCSA 6 back to the domain. Error messages are not found anywhere online.

  I was wondering if someone can help troubleshoot me SSO with a VCSA to 6u1 running. PLEEASE!  This has been updated about a week ago of 6.0 and had no problems until he decided to collapse Monday. At this time, that we had problems with our domain controllers, I don't know if it was related.

  Monday Veeam backup by using a domain account to access VCenter has stopped working. Authentication failure. Try to connect to VCenter WebClient with SSO that weI made for years also failed. Signature as root for web client has as well.

  Signature to the C++ client worked for connections without any problem, but really limited what we can do. So I spare the domain and attempted to join without success.

  I can sign into the web client with [email protected], you try to join the domain as we did before the results in "Idm client exception: error trying to join AD, code error [31], user..." " - no reference to error 31 anywhere. Yes the username in the form of [email protected]. The computer account has been recreated on the field. Connectivity to the domain controller is fine, because if I put the password wrongly, it tells me that authentication has failed. All services on the VCSA are started with the exception of the function Auto-déployer.

  I tried via SSH connected as long as root (it tells me that [email protected] has no shell access) domaine.net/opt/likewise/bin/domainjoin-cli join [email protected] translated by ERROR_GEN_FAILURE [code 0x0000001f], yet once a mistake that relevant results.

  I am unable to create beams journal via the web client or via the C++ client, I suspect because space on the VCSA which I was not able to solve. Execution of the VSAN performance monitoring seem to chew place until I turned it off, but haven't found all the resources online as to where to find them or how to remove.

  I have a snapshot that was done before I got updated to 6u1 8 days ago, but I'm afraid that everything I have done since then will crumble. This VCenter manages a VSAN production, and I can't get him off.

  Please can someone untangle me this mess? With the lack of informative error messages I don't know where to start!

  Thank you

  B

  Woohoo! I finally thought to it.

  To start with I've implemented a new VCenter server as a trial, nothing configured, just deploy the iso 6u1. I found that it was not automatically joined to the domain and has attempted to do. SAME ERROR! So the problem is not with VSphere. In recent weeks, we introduced two new DCs R2 2012 and retired from one of our 2008 R2 domain controllers. I closed the DCs 2012 and tried again with only the old DC on the network. It worked! I was able to join the VCSA test to the field, and after a reboot because the button leave available domain.

  So I she disjoint and then attempted to join the domain when running wireshark on 2008R2 domain controller's NETWORK card. Then, I grew up a DC 2012R2, waited 10 minutes or so close the 2008R2. Yet once, I ran wireshark but this time on the 2012R2 server's NETWORK card. I compare the results of a successful or not join and I saw that the 2012R2 DC has been a lack of outgoing SMB packets to the VCSA. The Server service is running on the domain controller in 2012, but the Microsoft recommendation has been to change startup srv.sys from automatic to manual on 2012 R2 server. I thought it was odd at the time, but we have changed when we put in place the new domain controllers to meet the BPA. I compared it to the registry setting on the 2008R2 domain controller. which has been set to automatic startup.

  So to allow VCSA to join the domain when you get the error 31, cancel it

  http://social.technet.Microsoft.com/wiki/contents/articles/21104.SRV-sys-should-be-set-to-start-on-demand.aspx

  on your server 2012R2 DCs if it has been applied it causes domain join failure.

  Command prompt: sc config srv = auto start

  or

  Register: HKLM:\System\CurrentControlSet\Services\srv\ from 3 to 2

  I hope this saves someone else the time it took me to understand! I guess I can cancel my request for support now...

• can not add admins in the domain for vcenter

  Hello...

  I have a strange problem with vcenter. I am trying to add the domain administrators in the permissions tab, but I do not see the available area.

  Although I can connect to each host in the cluster with my domain account, that I can't connect to the vcenter.

  also in web client when I have the connection with the SSO user, I only see the available system domain and local account of the vcenter server.

  When I try to add sources of identity, I see something on the URL and some other stuff...!

  What this has to do with my problem?

  Thank you!

  Hello

  Have you added the source of your identity (AD) to your web client?

  In URL, you must type: ldap://domaincontroller name: 389

  For users base DN: dc = Domain_Name, dc = com

  domain name: domain.com

  Base for groups DN: even as DN for users.

  authentication type: password

  test the connection

  Thank you

  AG

• Is there another of MSAD PL/SQL package, regarding the DBMS_LDAP LDAP

  I want to connect to MSAD of DB Oracle using PL/SQL.
  Let me rephrase my question, I want to connect and search querry on MSAD sever in PL/SQL Oracle DB. Is this possible? I am able to do similar for "Sun One LDAP" by loading the DBMS_LDAP package in Oracle DB. In seeking a similar link with MSAD, I get errors for Invalid Credentials. So, I wanted to confirm whether what I'm doing is correct. Weather using the DBMS_LDAP package I can connect and perform searches MSAD also.
  
  Published by: user784520 on December 2, 2009 05:13

  user784520 wrote:
  Let me rephrase my question, I want to connect and search querry on MSAD sever in PL/SQL Oracle DB. Is this possible?

  Yes. We use DBMS_LDAP widely enough in interface with the domain controllers Microsoft Active Directory (for both authentication and querying data DN) running.

  LDAP is also pretty much a standard protocol - which means on the client side is should not really matter if the LDAP server is a product of the ABC vendor or seller + 123 +.

• I started the download of el capitan and did not have enough space for the upgrade - I released space, but now the upgrade is blocked for download

  I'm on 10.10.5 and try to upgrade to el capitan via the App Store.  I don't have enough space at the beginning and upgrade wouldn't start - I got error message says not enough disk space.  Once I released space, download hangs and will not end.  I have restarted the download several times and have rebooted as well.

  Hello

  Take a look in your Applications folder to install Mac OS X El Capitan.app. If you find move him to the trash, then empty/remove it. Another thing you could try is to go to Launchpad and look an article with the 'X' Mac OS X logo on it,

  Click and hold on it until it wiggles, and then click the little 'x' and then delete.

  Restart the Mac, relaunch the App Store and see if you can download now El Capitan.

  Another thing you can do, when the download is complete and what is important before you begin the installation process, do a copy to install Mac OS X El Capitan.app and keep them safe, to an external drive or USB key, the original in the Application folder item is deleted once the installation is complete. It is snack and practice have this spare copy so that you can install on other Macs if you want you will need to re - install the system should anything go wrong in the future.

  And always, always make a backup before making major changes to your system.

• the space in the center of the display calendar top of the real calendar no longer displays a list filtered in several events.

  the space in the center of the calendar view top of the real calendar that is used to display a list filtered in several events. This list is now missing. How can I get that back?

  Finally, I noticed a menu item "events and tasks > find Events" with no shortcuts like Ctrl-F, which I tried. That fixed it.

• El Capitan Upgrade - not enough of space for the upgrade to Photos

  HI guys.  I just upgraded my MB of 2013 at El Capitan Air, and I'm having an issue update to iPhoto to Photos.  We have the iPhoto on an external hard drive library.  When I try to update library it tells me that there is not enough space.  Of course, the obvious answer, and one that I've read here, is to get a bigger external drive.  But before I spend the $$ to do this, I want to make sure that you understand how the upgrade.  The hard drive on my Mac itself is fairly complete, so if he tries to use somehow * that * as space time to do the upgrade, it won't work even with the biggest external drive.  However, if she only cares about the space on the disk where the iPhoto library sits, a new external drive is the fix.

  Anyone know how it works?  Someone got experience with success the upgrade for the Photos on an external drive when you are main internal drive is full?

  Thanks for your help!

  Mark

  We need details to help

  How much space you have on your Mac? What format is the EHD? How is it connected? What is the exact message that you found?

  LN

• Does someone have a MagSafe 2 power adapter whose serial number is located inside the space where the two pins?

  Hi guys!

  I want to know if the power adapter of MagSafe2 that I just bought is genuine or counterfeit.

  I bought a MagSafe2 power adapter that has its serial number located inside the space where the two pins. Its model # is A1424. All the power MagSafe adapters I've seen always have serial number located under the round metal head big (I guess it's called head male or female?). Please see photo for reference.

  If any of you have or had any Apple Store, can you let me know?

  Thank you!

  

  My 85 Magsafe is exactly identical to your image.   It was 'inside the box' with a new MBP computer.

• Add the domain to existing emails

  Im trying to add an existing work email Thunderbird and I continue to be 'impossible to find the settings for your email. It is not a place to put the domain name, I need to synchronize the email from my iphone, I noticed. Is it my problem or where I can put the necessary domain name?

  No Thunderbird does not support active sync...

  Now you can answer the question. So, we can switch to a resolution. What is an exchange server? If this isn't what email provider?

• How can I add a spacer to the bookmarks toolbar?

  I'm running version 33.1 and 35.0a2 of Firefox and all I want to do is add some space on the left side of the bookmarks toolbar, but I can't find this option to customize more. Does anyone know how to do this in the new versions? I can't even find additional modules for it.

  Thank you!

  John

  Separators and spaces have been removed in versions of Firefox 29. I know that the extension Classic theme restaurateur adds back to Firefox 29 +, but he does not remember having seen other add-ons with this feature.

• Black space on the right side of the browzer window

  I have a black space on the right side of the browzer window but even if disable all modules or even after reset firefox this problem persists. but when I maximize the window there is no problem.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  Is SafeMode has a bearing on this question?

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Download a pdf file, save, won't show the full name of the backup file when name contains a space, stop the name of the file.

  Download a pdf file, the file name contains a space in the middle of the file. The name showing on the 'Save' popup is first letters up to space. Works fine on IE8. For example, a file named "old snail_12345.pdf" would show only 'old' (ignore the "s"). This is on Firefox 30.0, WinXP Pro.

  Apparently, there is an extension to work around this problem. I have not tried myself. See:

  http://KB.mozillazine.org/Filenames_with_spaces_are_truncated_upon_download

• How can I add a space to the toolbar in Firefox 29,0? I can enter a space between the empty boxes and move around, but where can I find an icon 'space' to ADD a space?

  It has been useful in previous versions of Firefox to be able to add (a) space (s) between the icons in the toolbar to create groups of icons and/or icons separated by class or function. In Firefox 29,0, I discovered how 'capture' (drag and drop) a space of areas in the open toolbar and move it to another part of the toolbar. But how do I add spaces to the toolbar? In previous versions, there used to be an icon of the space in the whole of the Customize menu that could drag it to the toolbar for this purpose.

  Sorry, the new UI Australis has abolished the 'space' to customize. There may be an extension for adding 'space', but I'm not aware of it.