speaker and headphone switch problem

Similar Questions

• Headphones not detected, but playing the speaker and headphones.

  I have a hp laptop Pavilion g6-2231tx with windows 8. My speaker works fine, but every time I plug in my headset it detects not she but the audio comes from speaker and headphone.

  I have already uninstall the driver and re-installed but it does not work for me.

  I'd appreciate really any notice about it.

  I have to return my laptop to hp (still under warranty). HP said is it a hardware problem and replace equipment.

  It's corrected now.

• Sound is comin from the speaker and headphones at the same time. How to solve this problem?

  Hello! I installed win7 professional and upgrade to ultimate and when I play a music or vdo sound is coming from the speaker and the headphones. I have a 3ghertz Pentium 4 with 1 GB of ram, and it runs the 32-bit version. And also the headphone option is not present in the peripheral reading option.
  Can any1 please please help me?

  We consider that your machine uses Realtek HD audio-
  (Older versions of Realtek HD audio drivers may have a slightly different form, but the)
  basics should be the same).

  There are two ways to set up the helmet when it is plugged into the façade decision-making;
  (1) in Realtek Manager of her go to Advanced Settings feature in the upper right of the window.
  Check the circle next to cut... plugged back.
  When this fact was you must also click on the yellow folder icon below the
  Device settings advanced and check 'Disable protection of jack façade' is clear.
  -Of the drawbacks of this method are that you do not get an option of separate settings for headphones.
  then they use the same environment as your speakers and EQUALIZER settings, but you can use both the
  speakers and the headphones if you wish.
  -Note that with this option, the helmet does not show in Sound Manager window.

  (2) advanced settings in the sound Manager go to Realtek device.
  The check box next to do advance... at the same time.
  This will disable the speakers when headphone is plugged in the socket of the façade,
  and return to the speakers when headphones are disconnected.
  Also check one or more of the boxes below, according to your need.

  -With this setting, there is an option for headphones in the two Windows Sound manager
  and Realtek HD Audio Manager.
  -With this setting, it does not matter which option to use in yellow folder as the setting icon
  is ' either / or '. You cannot run at the same time the speakers and headphones.

  -Note that with games the headset must be connected prior to spear the game, or
  the default set to the speakers.

• No its speaker and headphone

  HP ProBook 6550 b

  WL555AV

  WINDOW 7 64B PROFFETIONAL

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  FTP://ftp.HP.com/pub/SoftPaq/sp48001-48500/sp48147.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Sound comes through the speaker and headphones at the same time

  Why is the sound that passes through the speakers and the headphones simutaneouly?

  Hi MariaDuncan

   

  Are the headphones connected correctly?

  I suggest you refer to the link below and use the provided troubleshooting utility. Check if it lists and solves the problems-

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope this helps.

• HP EliteBook 850 G3: No audio for no built in speaker and headphone with jack after driver and windows update

  Hello

  I just made some updates driver and windows (windows birthday) and after installation I have not any sound with the built-in spaker or with my headphones plugged with one taken more. But with a usb headset it works!

  When I go to the window of Windows playback devices there is no device present.

  I already update the Audio drivers and reboot to run the tool in solving audio problems in Windows, but nothing new, it does not.

  Gauthier

  Hi Gunthar,

  Give the driver following a shot

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

  This driver solved the same problem we had with our Elitebook 840 G3

• vCenter Migration and vDistributed switch problem

  Hi all

  I spend vcenter box intel AMD box. So this means that I won't be able to vmotion right?

  In this sense, I installed a new server vcenter on AMD box and added ESX servers one by one on the new vcenter server except those relating to the vDistributed switch.

  .

  I had problems with vDistributed switch cause if I try to remove a server from the cluster HA, vcenter gives an error because it has connection with the vDistributed switch.

  Please let me know how could remove the old vcenter servers and add new server vcenter.

  Thank you!

  Maybe the article will be useful

  http://KB.VMware.com/kb/1029498

• How to enable multiple audio output on Windows 7? Speaker and headphones play audio different...

  How to enable multiple audio output on Windows 7?  In Vista and XP it did automatically... I'm running Media center and Media player at the same time.  And plugged in a USB headset.  Media Player will automatically play through the headset and Media Center will go to the speakers.

  Why this feature is LEFT?

  Hi jibberz

  Welcome to the Microsoft Answers Forum!

  Unfortunately, several audio output is not a supported feature in Windows 7.  You may, however, check with the manufacturer of material for possible programs for that purpose.

  To work around the problem, try the steps listed in the link below and check: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/b1d1acac-1f21-4d23-8d68-98964d67c2c7

  For any comments, you can see the link: https://connect.microsoft.com/

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I make the portable speaker and headphones works at the same time?

  my sound card is a device high definition audio

  Hi Bernard,.

  It is not possible to use two devices at the same time in Windows 7.  You can have only one default device at a time.

• His problem with laptop speakers and headphones

  Yes, the night last and Eve, my speakers worked very well. In the long run a moment a Skype call, I had to switch to headphones because volume speakers is weak for a reason any. Don't ask me how or why. in any case, I have it plugged headphones can hear the sound of typing the volume bar in the Volume control and can listen to music through THAT my helmet. I've heard if your not careful, you can jam the switch between laptop speakers and headphones, so I tried pulling the plug in and out a few times, not good... I have a Dell Inspiron 9400 Intel under Windows XP SP3.

  Also, I made sure all the boxes in my properties of Volume control are enabled and are uncut.
  EDIT: So, figures that my Sigma Tel Audio necessary or needed a new driver, I went to Dell.com and downloaded the last being, installed, rebooted and then suddenly I hear these little tones, sounds is fixed again. So, I don't know if this issue must meet more.

  Hello

  Thanks for sharing your resolution.

  In the future, if you come across any question relating to Windows please visit Microsoft Answers forum.

• Error message: this action cannot be completed because the other program is busy. Choose ' switch to ' to activate the busy program and correct the problem

  Original title: server busy

  I get a popup server busy with the message: "this action cannot be completed because the other program is busy.  ' Choose ' switch to ' to activate the busy program and correct the problem.  There are two buttons"'Switch To' and 'Retry '.  Neither fixes the problem and I do not understand what they are talking about.

  Hi adarb,

  1. when exactly you get this message?

  2. what applications do you use when you get this message?

  Method 1:

  You can restart the computer and check if it helps.

  Method 2:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In the last months, I started to receive messages pop up when editing pdf files. One is "cannot complete this action because the"filename. " PDF-Adobe Acrobat Pro"program is not responding. "Choose" switch to "and correct the problem. O

  In the last months, I started to receive messages pop up when editing pdf files. One is "cannot complete this action because the"filename. " PDF-Adobe Acrobat Pro"program is not responding. "Choose" switch to "and correct the problem. The other is "content preparation courses. "Please wait while the document is being prepared for" and displays a progress bar. One last question, I noticed it is adobe hangs quite frequently and shows "not responding". I had Adobe Acrobat X Pro for several years, and these have not always taken place only months. I ' n not Adobe expert so I don't know why this is happening. I checked the updates. Any advice on what is happening?

  Hi jeffm7844011,

  Could if it you please let me know the version of the OS on your system?

  Please let me know this happens to you with all the PDF files that you try to change or with specific PDF files?

  Please see this KB document: https://helpx.adobe.com/acrobat/kb/message-content-preparation-progress-opening.html and Windows resolve system errors, freezes | Adobe software .

  Also please try to repair the installation by navigating to the help > repair installation.

  Let me know if it helps.

  Concerning
  Sarojini

• USB recording speaker both micro and headphones headset

  Windows 7 Pro 64-bit, SP1

  Adobe CC 2015

  Motherboard: ASUS Maximus VII formula

  I have a Logitech USB headset. I make voip calls and must record the conversations.

  It doesn't seem to be a sound driver that allows the microphone and headphones to send two signals to the input record.

  It will only record my voice and not the other person.

  Is there a way to do this?

  Thanks in advance.

  Audition records only what it is to be delivered by your computer - it is not taking part in the delivery of the signal which is determined by your audio system and pilots.  Different have different capabilities for what he can send to the recording software.  I was looking on the audio control panel, Windows or any special panel for the Logitech headphones and see if there is no option that you can play with the option - I can't be more specific without the hardware and drivers that you even.

  I have to do just occasionally, a similar record in my case via Skype.  If you use also Skype, I can recommend Free Skype Recorder of recorder Record with iFree Skype Recorder - your FREE Skype software call Skype calls it works fine for me and gives me going and audio mic in separate, channels which can then be opened in Audition for editing.   If you use other VOIP services, it's probably worth looking for a similar application for these programs.

• Satellite C850D-107 - Sound speakers and headphones

  Hi all.

  I recently bought a Satellite C850D-107.

  My question has probably been asked several times already, but when I put my headphones in the headphone I still get sound on the main speakers not great when you do not want to broadcast the sound everyone is close, but when I hit upgrade Mute speakers get off but I can still hear me through my headphones.

  Why is this?

  (it is not a problem, it's just a weird thing)

  Thank you

  Hello

  If this thread may be useful for you?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=256895

  Go to the dashboard-> Realtek HD audio manager
  In the upper right corner, there is a small yellow folder called "connector settings.
  Here, you can re-enable the setting "enable popup dialog box, when the unit is plugged.

  So now, when you plug an external speaker or headphones, it appears and you can select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.

• Try to use the speakers and headphones

  • I have a Durabrand 5.1 speaker system and normal headphones with microphone included. The speakers plug in a headphone and headset (of course). I'm trying to figure out how make my computer recognize them both at the same time. Until my recent updates I could disable my speaker and sound was still coming through the headset but either headphones now have no audio or the speakers do not have. Realtek Hd Manager doesn't seem to like them both at the same time. At the same time I didn't need the microphone turned on the headset due to having a Logitech cam with a. Any help would be appreciated.

  Hi Xerosk,

  First try to run the Audio troubleshooter built into Windows 7 and check if it can find any question and fix. Access the link below and follow the steps to run the Audio troubleshooter in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also, make sure that the default sound device is set correctly for the audio device you are using. To set the default device, follow these steps:

  a. click on, and then type Sound in the box to start the search.

  b. click sound in the search at the top of the beginning menu.c results. Click the reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected.

  Follow these steps:

  d. on the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  e. on the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  f.Select the audio device you want as the default audio device and then click on set as default.

  g. click OK to save your settings and close the sound dialog box.

  Determine if you can now hear. If you can hear the noise, the problem is resolved.

  Also try to update the audio drivers supplied by Device Manager and check if it helps. You can access the link below and follow the steps to update the drivers on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also contact relatek and check if you need to make changes in the settings in Realtek HD manager for the device to work.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.