Specific server service alerts

Similar Questions

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• Detection of InsightCM Server service stopped

  Hello.

  Is it possible to get some kind of alarm or notification, if the InsightCM Server service stopped running on the server? It is not something I've experienced, but I just got the issue with the customer, so that I am currently working.

  Thank you.

  Hi Jens,

  Unfortunately, there is not a built-in way to be alerted if the service of InsightCM crashes. However, you can use the built in tools of Windows services to run a program if the service crashes. You can set the action in Windows Services by right-clicking on the InsightCM service and selecting Properties and then accessing the Recovery tab. You can then this pointer to any generic EXE. This program, for example, could send users to inform them of the accident.

  

  Let us know if you have any other questions!

  Kind regards

  Kevin K.

  Technical sales engineer

  National Instruments

  http://www.NI.com/support

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I tried all listed in other postings, but our VSphere 4 server resides on a SQL server server.

  I tested the connection odbc with the SA password and it works, it rebooted several times now, tried to stop all services and bringing up one at a time, but whenever a dependency is not. I get this error in the system log, the VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  And

  VMware VirtualCenter Management Web Services service depends on the VMware VirtualCenter Server service which failed to start because of the following error:

  The service has returned a service-specific error code.

  Application log says this

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  I don't know how to fix it. It was working fine yesterday. Nothing has changed. Or has anyone experience this problem and have a solution?

  see if that helps

  http://KB.VMware.com/kb/1015101

• CF8 will of Application Server Service does NOT start

  I came across this error:

  means: Java heap space

  and after researching it, it seemed to me that I should to the maximum segment size on the page Java/JVM, so I increased my heap size max to 1044 MB of 512, via the CF administrator, I also added the maxPermSize = 256 m.  Then I restarted the server, but the Application Server service will not start.

  I opened home/runtim/bin/jvm.config and define the segment of memory of 1024 size, restart, the service still does not start.

  Set the size of heap max 512 and removed maxPermSize, server rebooted, service still does not start.

  A value equal to the java.args set :-serveur-Xmx256m-Dsun.io = false .useCanonCaches - xx: MaxPermsize = 128 m - XX: + UseParallelGC-Dcoldfusion.rootDir={application.home}/... /-Dcoldfusion.libPath={application.home}/... / lib - Dcoldfusion.classPath={application.home}//lib/updates, {application. Home} /... / lib {cation.home} / app... /Gateway/lib /, {application. Home} /... / wwwroot/Web-INF/Flex/Jars, {application. home} /... / wwwroot/Web-INF/cfform/Jars

  Restarted, the service still will not start.

  Someone at - it ideas?

  The error that I get trying to start services is:

  Windows could not start the server to ColdFusion 8 applications on Local computer.  For more information, see the system even log.  If it is a non-Microsoft service, contact the service provider and therefore the 2 service-specific error code.

  Thank you!

  If you have a backup of the file config before you made the changes, restore this file.

  If this isn't the case, it seems that you have a few typos and extra spaces in your arguments.  For example "-xx" should be capitalized and '{application .home}' has a space after 'application' that shouldn't be there.  Note that the JVM arguments are case-sensitive.

  Here are the arguments for a working copy of the CF8, use at your own risk and your backup configuration file before making any changes.

  -Server-Xmx512m - Dsun.io.useCanonCaches = false - XX: MaxPermSize = 192 m - XX: + UseParallelGC-Dcoldfusion.rootDir={application.home}/... /-Dcoldfusion.libPath={application.home}/... / lib - Dcoldfusion.classPath={application.home}//lib/updates, {application. Home} /... / lib {cation.home} / app... /Gateway/lib /, {application. Home} /... / wwwroot/Web-INF/Flex/Jars, {application. home} /... / wwwroot/Web-INF/cfform/Jars

  Beware of the forum software sometimes adds extra space to the text that is displayed here.

• Presentation server service is not started

  Hi Experts,
  
  I followed the steps to Email deliver reports according to the blog of Catherine, and I added the three lines below in the file instanceconfig.ini
  
  < CredentialStore >
  < CredentialStorage type = 'file' path="C:OracleBIData\web\Config\credentialstore.xml"/ >
  < CredentialStore >
  
  When I try to restart BI Presentation Server service it will show the error bellows.
  
  Windows could not watch the Oracle BI presentation on Local computer server. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service-1-specific error code.
  
  Help me to overcome this error.
  
  Thanks in advance...
  Oldia...

  Hello

  
  
  

  in the last step use * instead of **... and try

  closing all tabs must be ' / '.

• to use Terminal Server services on the Server 2008 r2 is the server must be a domain controller

  to use Terminal Server services on the Server 2008 r2 is the server must be a domain controller

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows 2008 server services will be automatically collapsed.

  Windows 2008 server services will be automatically collapsed.

  Here is the system errores.

  Log name: System
  Source: Service Control Manager
  Date: 11/4/2011 11:27:45
  Event ID: 7034
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: L230SRV10.griffin - domain .net
  Description:
  The unexpectedly finished Server service.  He did this 3 times.
  The event XML:
  
   
     
      7034
      0
      2
      0
      0
      0 x 8080000000000000
     
      3679
     
     
      System
      L230SRV10. Griffin - domain .net
     
   
   
      Server
      3
   
  

  Hello TonyJi,

  I suggest you raise this issue on the link below for Windows Server.

  Windows Server:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• What is a Terminal Server Services?

  Original title: Terminal Services?

  What is a Terminal Server Services? It's the description: allows multiple users to be connected interactively to a machine as well as the display of desktop and applications to remote computers. The Foundation of the remote desktop (including RD for administrators), the fast user switching, Remote Assistance, and Terminal Server. I don't want other users to be connected to my computer and I don't want to share anything with other machines. Services Terminal Server has to do with the router? Can you please let me know more about this service and what will happen if I stop the service. My OS is Windows XP SP3 / Google Chrome / laptop with wireless router / device of Netgear USB to connect to the router. Thanks in advance for your help.

  Hello

  In Windows Server 2008 R2 remote desktop services, formerly Terminal Services in Windows Server 2008 and earlier versions, is one of the components of Microsoft Windows (client and server versions) that allows a user to access applications and data on a computer on a network using the Protocol RDP (Remote Desktop). Services Terminal Server is the Microsoft implementation of thin-client terminal server computing, where Windows applications, or even the entire desktop of the computer running Terminal Server Services, are made accessible to a remote client computer. The client may be a computer, running any operating system as long as the Terminal Server services protocol is supported, or a barebone machine powerful enough to support the Protocol with the Terminal services Server, only the user interface of an application is presented to the customer level. Any entry which it is redirected over the network to the server, the application execution takes place.

  For more information, see this link:

  http://support.Microsoft.com/kb/925876

  It will be useful.

• Now, I am unable to use the Terminal Server service to connect to one of my Windows XP machines.

  Hello

  I used the Terminal Server service to connect to a remote Windows XP/Win 7 XP machine machines. At the beginning of this, it was beautiful, but after some time, say 1/2 hours, this remote XP computer has become inaccessible and even I couldn't use Teamviewer is there to connect! But when I went to this remote computer to XP, I noticed his connection was fine and I could ping www.google.com on it!

  original title: unable to connect to him

  Hello human Chen,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  I hope this helps.

• Shut down Windows XP: "program end" "sql server service manager.

  I use Windows XP SP3.  When I turned off my computer, I get an error message with "End program - SQL Server Service Manager" in the title of the window.

  How can I get Windows XP to shut down without this error?
  Thank you

  Winner!

  Final solution was to use of AutoRuns to disable the four entrances to the SQL.  Using AutoRuns, I still did not have to change the registry and did not have to uninstall all the software,.
  The four entries in AutoRuns entries are:
  (1) in "C:\Documents and Settings\All Users\Menu Menu\Programs\Startup"
  The AutoRun entry: Service Manager.lnk
  Description: SQL Server Service Manager
  Publisher: Microsoft Corporation
  Image path: c:\program files\microsoft sql server\80\tools\binn\sqlmangr.exe
  (2) in "HKLM\System\CurrentControlSet\Services" (can also be found in Services of AutoRuns tab"
  The AutoRun entry: MSSQL$ MICROSOFTSMLBIZ
  Description: SQL Server Windows NT
  Publisher: Microsoft Corporation
  Image path: c:\program files\microsoft sql server\mssql$microsoftsmlbiz\binn\sqlservr.exe
  (3) in "HKLM\System\CurrentControlSet\Services" (can also be found in Services of AutoRuns tab"
  The AutoRun entry: MSSQLServerADHelper

  Description: Microsoft SQL Server Active Directory Helper Service

  Publisher: Microsoft Corporation

  Image path: c:\program files\microsoft sql server\80\tools\binn\sqladhlp.exe

  (4) in "HKLM\System\CurrentControlSet\Services" (can also be found in Services of AutoRuns tab"

  The AutoRun entry: SQLAgent$ MICROSOFTSMLBIZ

  Description: Microsoft SQL Server Agent

  Publisher: Microsoft Corporation

  Image path: c:\program files\microsoft sql server\mssql$microsoftsmlbiz\binn\sqlagent.exe

  Thanks for all the help!

• Can't share files and printers on the network. Error message: Server service is not started.

  I CAN'T DO FILE/PRINTER SHARING.

  I GET a MESSAGE SHOW "SERVER SERVICE NOT STARTED" I ALSO TRIED WINDOWS HELP AND IT SAYS HELP AND SUPPORT NOT START. HOW CAN I GET THESE TO START AUTOMATIC

  What version of Windows, including the service pack is installed? (Do right click my computer and select Properties, if you do not know)

  The method 1 and method 2 in this article--> http://support.microsoft.com/kb/885859

  If you're in the Services applet according to method 1, also make sure that the Startup Type is set to automatic (to resolve, double-click the entry in the Services; Startup type is under the general tab).

  You can also start Help and Support by using the Services applet (its Startup Type can be manual or automatic).

  If you receive error messages when you try to follow the steps above, report completely, without paraphrasing.

  The fact that two fairly common services do not work can mean that something more sinister is happening.  What antivirus application do you use?  What's his current subscription?  Its subscription has already been authorized expiration?

  You can download, install, update and run MalwareBytes AntiMalware (it of free and can be removed later if you wish).

• Server service crashes ony several computer, why and how fix?

  Randomly, I have several computers taking 15-30 minutes to start, when I look at the error log his saying that the Server service to start hung\failed.

  Why has this happened?

  How should I do?

  See you soon

  Wayne

  Hi Wayne,

  1. do you have computers connected to a server, or a domain?

  2 have you made any hardware changes or software on the computers before this problem?

  If the Windows XP computers in a domain environment, thank you for posting your question in the TechNet forums for assistance.

  Hope the helps of information.

• Disconnect a session from the Terminal Server Services causes system hiccups.

  Dear reader,

  We noticed some undesirable in MSTSC behavior when a network connection drops during a session-MSTSC to a server. What happens is that when the user is disconnect from the remote session due to network connection dropping, the entire system freezes for a few seconds, making the communication on other physical cards within this same remote device which are not affected by a network connection cannot fall.

  In order to reproduce that we run several tests on the following versions of windows using various equipment:

  • Windows 2003 Server Standard Edition
  • Windows 2008 Server R2
  • Windows XP

  Tests were performed on both physical and VMWare virtual servers. All systems are equipped with at least two physical ethernet adapters on different IP networks.

  During the test, we put a MSTSC connection to windows server during the first card (A) on this server. On the other (B) ethernet card we have implemented an application to communicate to a client on another machine, sending simple messages every second and receiving responses.

  When we pulled the ethernet adapter cable has and in doing so, disconnected the MSTSC, the communication on the ethernet B card connection would fail aswell for a few seconds.

  Is this a known issue? And in such a solution?

  RayZ001,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to Terminal Server services and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.