Specific times on 1200 + ca Parental Controls does not

Hello

I recently bought from Best Buy a Linksys AC 1200 +. I love the Smart Wifi and remote application access, however, I found that the portion of the precise moments of parent controls doesn't seem to work. I chose the time I want the device to be able to access, but no matter what I do, as long as I have the parental control activated, the devices lose connectivity.  If I change it to never be blocked, it works, or if I change to always block access it works, but no matter which option I choose (white should be allowed and the blue should be blocked - I tried both) does not work.

Any ideas?  I have the latest firmware and I made sure that the device and the router are on the correct time zone and the time has come.

I'm frustrated, but I hope that this community can help!

Thank you!

Sean

A factory reset done before and after the update and implemented from scratch?

What browser do you use? Try IE or FF, and fact that the same thing has happened?

Tags: Linksys Routers

Similar Questions

  • Parental controls does not: Impossible to make changes to parental controls settings. If the problem persists, see your system administrator.

    Original title: Parental control does not

    Try to set up Parental controls for my son's account. I have an account manager, go to control panel / user accounts / parental control - click on windows expects to obtain two error message with the same message: "unable to make changes to parental controls settings. If the problem persists, see your system administrator. "I'm a sysadmin, so what's the problem?

    On a side note, I have two children on this computer. Had to remove my son because he downloaded a virus. So before the two children had parental control. But when we were going to change their times permit, he would give this error message but weather changes would take place. Now that I am setting up a new account for him, can't get parental controls to work.

    Hello

    Step 1: turn off UAC (User Account Control) and check the result

    See how can I change the behavior of user account control by using the slider? :http://windows.microsoft.com/en-US/windows7/How-do-I-change-the-behavior-of-User-Account-Control-by-using-the-slider

    Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

    Step 2: I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    Check out the link below to check if the parental control is correctly defined

    http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • "parental controls does not allow this game begins" without any restrictions applied

    I get the window ' parental control does not this game start "when I try to run a game and all settings are disabled.

    Hello helicopter-Guy,.

    Welcome to the Microsoft answers site.

    I would like to ask you a few questions in order to get a better understanding of this issue.

    ·         What is the operating system installed on your computer?

    ·         Did you the latest changes on the computer?

    ·         Logged in as the administrator of the computer?

    ·         What game you try play?

    You get this error usually when parental control is set by the administrator for your user account.

    I suggest that you try to run the game as administrator and check, if you are able to play the game.

    Right-click on the game, click Run as administrator.

    If the problem persists, then I suggest that you install the game in Vista compatibility mode and check if you are able to play the game.

    See the link to run programs in compatibility mode: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-of-Windows

    Swathi B - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Parental controls does not Windows 7 times

    I am using windows 7 Home and Windows Live essential 2011.  When I try to turn on the delays and app and game restrictions, the feature tells me that I have to upgrade to windows 7 and create a standard account.  The account for my children is a standard account.  I checked for updates to windows live essentials and deleted and created another standard account for my children.  A know the solution or work around for this?  In addition, my copy is "true".

    Thank you.

    Hello

    I apologize for the late response. You still have the same problem? If so, could you please check if the option of Parental control appears on your control panel?

    For the time limits work correctly, Parental control must be enabled. Check if the option , apply the settings is enabled.

    Please make sure you have the latest version (15.4.3555.308) of Windows Live family safety, you can download the latest version from this link.

    In addition, please be informed that the feature of time safely from the family has changed recently. For more information, please see this sticky post:

    How to work the allocation of time and curfew?

    Thank you!

  • Parental controls does not properly

    Parameters of OpenDNS does not.

    My wireless n300 router wnr2000 v3 does not block the sites according to the parameters of opendns more. He worked for some time then it has recently stopped working. Its value at any time so it's not a time issue. Someone at - it suggestions?

    I have wasable to find a solution. Thank you for your help. The only solution I could find was to use Netgear genius app. Instead of using OpenDNS Netgear. I have installation engineering for parental control. LinkedIn has OpenDNS. Define filtering. Activated the filter using genius. And bingo. This works.

  • Parental controls does not block the proxy or VPN servers for access to *.

    Our teenage son found a way around Parental controls by using proxy servers or a personal VPN. I tried to add more sites to the list of blocked sites, but there seems to be hundreds of them. Is there a way to stop this exception taking internet access completely? He also said that all he has to do is ask a friend for some and they will send email * to him.

    Hello

    I suggest you try to fine the following Microsoft articles and check if it helps.

    What can I control with Parental controls? :

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-control-with-parental-controls

    Change Internet Explorer Content settings:

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-Explorer-content-settings

    How does the web Parental control filter? :

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-does-the-parental-controls-Web-filter-work

    Hope the information is useful.

  • possible parental control does not

    I have periods of parental control set up on my account of children.  recently I can't change the time limits on any of the accounts.  I get the error message saying that I can't change the time limits on this account.  What can I do?

    Hi claricemarie,

    You are able to set deadlines for all other accounts?
    If it works well before?
    Have changes made to your computer recently?

    In the meantime, I suggest to create a new standard user account and try to set the time limit.
    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Check whether the problem is resolved.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • Parental controls does not-webaccess all refused

    I set up parental controls in windows for my administrator accounts. They worked well and were all in custom mode. Recently, yesterday they block all access to any website. I have treid to reset them and still have the same problem. other than the option 'Allow all' - which unrestricts access to the internet, all personalized, low, medium or high options block ALL access, except to specifically sites allowed. So the categories don't work at all - he just block everything.

    The block page that says at the top "rating service unavilable"...

    Help, please. My children cannot be allowed on the internet until this is sorted

    Hi irob51,

    I suggest you turn off the Parental control, reboot and then enable it and check if it works.

    To turn off Parental controls:

    1. go in the Windows Start menu control panel.

    2. click on user accounts and family safety.

    3. click on Parental controls.

    4. click on continue in the user account control window.

    5. Select the user account in the Parental controls window.

    6. to turn off select Parental control: click outside the window of the user controls and click OK.

    8 restart the computer, activate the Parental control (to activate select Parental control: click on) and check if it works

    For more information, you can consult the following link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

    Hope this information is useful.

    Jeremy K.
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows parental control does not

    I open the browser, go to https://account.microsoft.com/family
    As I continue to connect, the page opens correctly and shows my family.

    I have two accounts of children under control. One of them works OK. But the second account suffer from difficult problem.

    I select the account of the issue. Control of security for the child family page account opens, but instantly freezes loading recent activity. So I can't do anything with this account, I do not see the recent activity, I can't change the web settings, the page is totally *.

    The problem persists after you delete the cookies and files cached. The problem does not depend on browser (checked with the latest versions of Google Chrome, and MS Edge anyway).

    My account is * address email is removed from the privacy *.

    Child of the problem account is * address email is removed from the privacy *.

    Hi AllegeCityRat,

    Still having this problem?

  • Parental controls does not open

    I can't open the Parental controls after you open once, and then close it. I can open it once after the computer has been restarted, but if I close the window, I can not open again until I restart my computer. I tried to open it from a shortcut on my desktop which produces a flash on the screen as it is going to open but immediately goes. I tried to open it directly from the control panel with nothing at all happens. I tried right click and click open between these two places. Nothing seems to work. Suggestions? I have to minimize the window of my taskbar so I can access without having to always restart my computer whenever I need to make a change, which is often. But if I accidentally close the window, I have to restart my computer to be able to open it again.

    I have Vista Home Premium SP1. We have six accounts running on your computer.

    mwinterstein

    It could be that this program could be damaged on the user account. You can try to create a new user account and test.
    HELFUL LINK: http://windowshelp.microsoft.com/Windows/en-US/Help/769495bf-035c-4764-a538-c9b05c22001e1033.mspx

    Please let us know

    Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

  • I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

    I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

    Hello

    1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

    2 have you made changes on the computer before this problem?

    I ask through the following article to find out how to set up Parental controls:

    http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

    http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

    After completing the above links persist issue please fallow the mentioned below of the methods.

    Method 1: Disable UAC (User Account Control) and check the result
    See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

    Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

    Important: Enable UAC after you complete the steps.

    Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
    See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

    Hope the above information is helpful.

  • HP 15-500LA OMEN: HP OMEN LIGTH CONTROL DOES NOT WORK

    Hello

    I just got a 15 HP on August 22 and omen control does not change the diodes.  The first thing I did is you update Windows 8 Windows 10. OS is in Spanish

    Control of omen for change the light does not work.

    Can sombody help me to make it work? I'd appreciate help amny

    Thank you so much IMaxx

    I've updated the utility HP System Event and after the reset of the system, it works now

    Thank you once again

  • Satellite X 200 - after upgrading Vista remote control does not work

    Hello

    I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

    Is there a driver for my remote?

    You may need to install the infrared driver.
    This driver is required to activate the infrared port on your laptop.

    You can find it here in the X 200 section
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Re: Satellite L500 iCQ, as Volume Rotary control does not work

    Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
    Can anyone help?

    To be honest I don't think that anyone will be able to help you with this.
    As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

    What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

    Do you use pre-installed OS original you got with your laptop?
    Have you made some changes or anything that can have a negative influence in this?
    Since when you noticed this strange behavior?

  • Satellite P100 remote control does not work

    Hello

    Guys, I bought a toshiba satellite p100 and the remote with it does not work...

    no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

    Help, please...

    Thank you...

    Post edited by: qazam

    Hi Qazam

    How did you test the remote control?
    What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

    I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

Maybe you are looking for