Specified path is unavailable '% APPDATA%\ '. ».

Similar Questions

• Error 1314. The %appdata%\Autocad\ specified path is not unavailable

  Hi name is Kenya Caldwell and I am trying to install a program called Autocad, but whenever I do, I get the message following error 1314. The %appdata%\Autocad specified path is not unavailable.  I received a response from Autocad, but I do not understand, or not if it is correct.  Could someone help me with this problem?  Below is the message of Autocad.

  By specifying an installation location using a Windows environment variable

  Question

  When you have created a deployment or performing a stand-alone installation, you tried to specify the installation location using an environment variable, such as %ProgramFiles%, but you receive one of the following error messages:

  Please provide the path name where the customers go to install AutoCAD 2007 on their local computers.

  Error 1314. The path '% PROGRAMFILES%\..' is not available.

  Solution

  It is not possible to specify a variable of environment such as installation or the installation of customer location in a stand-alone installation or network deployment. If you install to different locations on different machines, it is strongly recommended that you use the deployment wizard to create several configurations of deployment for each location.

  To use a variable of environment as the installation location, you must run the installation of the product from the command line. This can be done by entering the following in the command line Windows or via a batch/script file.

  Note: This installation method is not tested or supported by Autodesk.

  Stand-alone installation

  MsiExec.exe /i "\Bin\AcadFEUI\acad.msi ' INSTALLDIR=%PROGRAMFILES%\

  Note: Replace the drive letter containing product for disk. Replace the rest of your installation for location. It is strongly recommended to use paths without spaces for this type of installation.

  Kenya Caldwell

  Salute to the Kenya,

  Try the steps mentioned by me in my first post and verify if the problem persists.
  See cannot install AutoCAD

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• The shortcut error message: the specified path is not; Maybe reinstall Firefox whenever I want to use.

  When I install Firefox, it works very well. Installation does not include a shortcut on my desktop, then when I try to start it again, I go to "all programs." Next, I get the message "the specified path does not exist. I think it has something to do with the confusion between two hard disks. C: drive, a small SSD, contains the operating system and other software. D: drive is my data disc, contains other applications, photos, music, etc. The way referred to in the error message is D:\Program Files (x 86) \Mozilla Firefox\firefox.exe.

  Firefox does not have the ability to choose a disk for installation. Is it possible that it is automatically installed on the C: drive, the shortcut continues to send on the D: drive?

  If you have any ideas or suggestions, I'd like to hear them.

  Using your file browser, look for Firefox in c:\Program Files (x 86)
  After, look in other files of the program (x 86)

  Once you find it, click with the right button on Firefox.exe and create a shortcut.
  Move it to your desktop. It work?

  Note: In the creation of shortcuts, you can without spaces. Instead of use;
  c:\Program Files (x 86), you should use; "c:\Program Files (x 86)".

• Windows cannot access the specified path or file and devices problem

  I am on windows 7 o s a problem facing "windows cannot access specified path or devices" his see on instalation game of the World Cup fifa 2010 file this error see (file thretensed virus). How to fix this problem please help me

  installation file come you from another computer or downloaded from the internet? If so, right click on your setup file > properties > then press on unlock. This method works every time. If this is your problem or not please let me know :-)

• When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

  whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

  (1) is the issue limited to only Corel Draw?

  I suggest you to restore the default values by pressing the F8 key while the program starts.

  Reference: File not found valid environment...

  http://CorelDRAW.com/forums/t/4156.aspx

  If the problem persists, I suggest you contact the link mentioned below for the best support.

  http://CorelDRAW.com/forums/

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Windows cannot find the specified path

  I am trying to start my Apple Mobile Device service, in administrative tools, in respect of Services and I get the error message 3. Windows cannot find the specified path. I am logged as administrator, while he was trying to do. I don't know why it won't let me do that. Help, please! Any input would be appreciated. Thank you!

  Hi msguyana_2000,
   
  Here's a post that addresses a similar issue. To resolve this issue, try the suggestion given in the post.
  mobile device has not yet started and path of error 3 unidentified

• 1320 error: specified path is too long: C:\ProgramData\Documents\MyCADPro files

  When I try to install CAD Pro6 on my ASUS laptop, I get an error 1320: specified path is too long.  I tried to change the path so it is not that long, but it does not yet install.  Jonathan Z had asked Howbat how go through computer > organize > folder options > view and check "show the hidden files and folders" and uncheck "Hide protected operating system files" and then re-install the software, but it still gives me the error 1320.  I contacted the technical support CAD Pro and they tell me that it is a Windows Installer issue.  Any advice would be greatly appreciated.  Thank you

  The path of the file must be less than 150 characters. try to further reduce its size. http://answers.Yahoo.com/question/index?QID=20070805091343AAWpOq9

• Windows Defender: the specified path does not exist.

  What happens if when I have on windows defender, he said

  C: / Program Files/Windows Defender/MSASCui.exe
  the specified path does not exist.
  Check the path and then try again.

  Hello

  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Right click on your icon - properties - Shortcut tab and compare your configuration to the one above.

  This is the equivalent of:

  ' C:\Program Files\Windows Defender\MSASCui.exe "'

  Note the space before the P and the / slashes in your. Rob - bicycle - Mark Twain said it is good.

• Windows search service couldn't start. The system does not have the specified path. How can I fix it?

  I'm having a problem where IE takes up to five minutes for a web page.   I see the mistake of follow up in the event viewer:

  Log name: System
  Source: Service Control Manager
  Date: 14/08/2012 21:14:10
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC

  Description:
  The research service Windows could not start because of the following error:
  The system does not have the specified path.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event ">"
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      391647
     
     
      System
      Owner-PC
     
   
   
      Windows Search
      %%d Ko
   
  

  When I run the program Microsoft FixIt Center I get 3 error messages that do not reach the difficulty.

  ---------------------------------------------------------------------------------------------------------

  (1) Windows Search is crashing or not fixed failing

  Windows Search crashes or breaks down after that that she has started.  In addition, an event ID 7042, 100 or 1000 is logged in the Windows event log, or the Windows Search Service is not running.

  (2) search Windows does not start and gives an error message no fixed

  Windows Search does not search results show and there is an error at startup.  A 3024 or event ID 1006 is logged in the Windows event log, or the Windows Search Service is not running.

  (3) Windows search shows no results not fixed

  Windows Search shows no results.  In addition, an event ID 7040 is logged in the Windows event log, or the Windows Search service is not running.

  ---------------------------------------------------------------------------------------------------------

  Someone at - it solutions?  Oh, I'm running Vista 32 Home SP2

  Thank you

  Hello

  Did you change to the computer?

  I suggest you to see the links and check.

  The problems with the search

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• Somehow, I lost all my windows games. "C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist."

  Hello

  Somehow, I lost all my windows games.  I have Windows Vista Home Premium; Internet Exployer 9 & Service Pack 2.  I don't know if you need any information Add ' l to answer my question.  But if anyone can help me, I'll be very grateful.

  I'm not at all computer literate.  So if you answer me, please give me for exact directions.

  I already watched: Control Panel; Programs of devices &; and the box is checked for the 'games '.  I also clicked on the word 'Games' and all games can up and they are all checked.

  When I try to access the games, I get this message:

  C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist.  Check the path and try again.  (But I don't know how to check the path!  Can someone help me?

  Thank you, b.

  C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist.  Check the path and try again.

  What do you get the message above? You try to put a tick in the box empty for Minesweeper in Windows turn features on or off?

  If you uncheck the box for games, click OK, restart your PC, then check the box for games, press OK and restart again, what happens?

  Is it one bought for PC & that you own, or is it a PC belonging to the company?

• When I try to open the Director direct windows it says cannot find the specified path

  Whenever I try to use windows live movie maker, or Director of windows or make a video of pictures it says 'cannot Sindh the specified path.  I used to use these products without problems. This is the first I have used in a while and none work.

  Where are the pictures archived which
  you import into Movie Maker?

• When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist.

  When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist.  Check the path and then try again. "Should I do to get my games back so I can play them?  I've tried enabling/disabling of Windows features, but it did nothing.  I also tried to go through the run, but that has not worked.  And, I tried command prompt, but it says that I am not the administrator, who I am.

  Not accessible games

  I haven't had any changes consciously, and the games do not work in any user account.  When I've done sfc/scannow (command prompt) he said that I was not the administrator.  I could learn from another source to solve this problem - in the start menu, right click on the command prompt icon, and then click Run as administrator.  Hope everybody help with this problem.  If you do not have command prompt in your Start menu, any type of command prompt in your search box and it should appear.

  Anyway, my games work now.  Thank you

• Windows Installer service is stopped 3 error "the system does not have the specified path.

  Original title: Windows Installer Service is stopped

  When I try to start the windows service install, I get: Windows could not start the Windows Installer Service on local computer.
  Misconception # 3 "the system does not have the specified path.

  Hello

  Try the methods below and check if the problem persists.

  Method 1:

  I suggest that you follow the steps under the heading Windows Installer issues in the link below to fix the problem.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2:

  You can also try running a Scan SFC (System File Checker):
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

   

• Error: 'name of specified path was not found"when importing images

  Original title: ERROR TRYING to IMPORT IMAGES

  When you try to import disc images of scan of my phone, I get message specified path name is not found.  I have not had any problems with this before.  Help, please!

  Hi DBALSLEY,

  ¯ How import you the photos in the card?

  ¯ You can view photos from the SD card?

  Few things to try:

  1. unplug the card and plug it in again. Then try to copy the pictures.

  2. If you tried to transfer images using import to Windows, try to transfer normally and vice versa.

  How can I get pictures from my camera to my computer?

  View and transfer files to and from a memory card

  For more help, please post in this forum: http://forums.sandisk.com/

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.