HP P6654y does not sound blaster Audigy

Similar Questions

• Want to 700-414: on board his party after the installation of Sound Blaster Audigy Fx card

  I installed a Sound Blaster Audigy Fx to perform digital communication with my ham radio equipment. The original IDT ports do not work after the installation of the SB. The IDT does not appear in Deives Manager. I tried loading the IDT drivers but not compatible message and download failed.  I did it on other HP computers I've owned without problem.

  Thank you for any help you can give me.

  LarryC4

  Hello:

  See if your BIOS has an embedded audio location.

  If so, it can automatically able to off when you installed the add-in on the sound card.

  Check the options you have for setting the audio embedded.

  If it is on Auto or disabled, change it to "Enabled", save the setting where you made the change, and again when you go out.

  The sound should then work on both devices.

  And if the sound card works with the integrated audio system setting to enabled, then change your Auto if aboard was off.

• Cannot get Sound Blaster Audigy SE SB0570 drivers to install correctly

  Windows 7 32 bit
  Mobo Gigabyte GA - M61P - S3 MB (nvidia/AMD compatible)
  Sound Blaster Audigy SE 7.1.

  I tried to install the XP drivers in compatibility mode, Windows 7 drivers, published by Creative (SB24_PCDRV_LB_1_04_0090), created by Daniel pilots (including one of its older versions for Vista) and also let Windows download and install the "correct" drivers for me.  He still will not install properly!

  I get this error for 'SB Audigy' and Trusted Audio Device from Microsoft: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to install it in safe mode, I tried to delete driver files associated with as much as I could and then put it back (was not able to remove all the due to permission issues), I also reinstalled 7 and tried to install the driver of Daniel immediately after installation of my chipset drivers), none of them (as well as many other combinations) gave rise to audio drivers works.

  If it's any help, Windows tells me contradictory things this way: install the software drivers SB Audigy Troubleshooting "audio playback" tells me SB Audigy successfully installed has a driver problem and it was not fixed.

  Any help would be GREATLY appreciated.  Thank you!

  @lou - no doubt the first thing I did.

  To fil919.  I have broke down and bought a new sound card to another manufacturer but had to jump through hoops to let him work, so I think that the process might have worked with the Creative card.

  Reinstall Windows 7 as a clean copy - NO upgrade (go ahead and have the plugged card).  Remove any audio drivers Windows tries to install (Device Manager).  Take Creative XP drivers, use it and launch the setup.exe under Windows XP SP2 w / admin rights compatibility mode (if you don't know how to do this: right-click on the exe, select properties and there is a "compatibility" tab to choose these options).  Make sure that you select the setup.exe in the folder "drivers" under this pack (just in case - the rest of the software is often unnecessary in my experience and the most variable we can eliminate the better!).  And as a note, it's literally the second thing that I installed after I reinstalled windows - first being my GPU drivers.  I hope this works!  Otherwise the sound card, I had was the SIIG SoundWave 7.1 PCI (on Newegg for $35) card, but I had to go through a clean install for this card to work.

• No sound in Windows 7 after installing dual boot Ubuntu (Sound Blaster Audigy)

  I recently put my Windows 7 system to dual-boot with Ubuntu 9.10.

  Now, Ubuntu will play audio through my Sound Blaster Audigy, but Windows 7 will not. I reinstalled all the drivers and installed correctly. I went through the troubleshooting Control Panel section; She didn't find any problem, but there is still no sound. When I play music, volume control shows that the audio is playing.

  I can only assume that there is a problem with the installation of Ubuntu, that seems odd, since BONES are on separate partitions on my hard drive. Like I said, Ubuntu played outside the Audigy with no problems.

  Meanwhile I use my onboard sound for Win7, but I'd love to get my audigy...

  Any ideas or suggestions are welcome.

  Nope checked all the possible power for audio setting in windows 7.  The only solution I found was disabling Audigy, plug in my onboard sound, allowing it and restart the computer.  On restart I could activate audigy, plug on it and activate the audigy player.  It was my only solution, but this is not going to work whenever I want to use ubuntu. No solution practice.

• I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  BabsMKE wrote:

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  settings - do not disturb - off

• IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

  If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?

• Creative Sound Blaster Audigy 2 not recognized ZS running Win 7 Ultimate - 64-bit

  Friends,

  I have a situation where I ask for a help. It's as follows:

  1. the old desktop that PC is equipped with a device for Creative Sound Blaster USB based - Audigy 2 ZS attached, it was purchased in August 2008 and since then, initially worked with Win XP (32-bit) - August 2008 to Oct 2012, then Oct. 2012 (when I upgraded the operating system to Win 7 Ultimate 64 bit) until last week when I upgraded the PC hardware.

  2. However, after the upgrade, the PC does not recognize this device shows at all - a yellow exclamation mark with a label "unknown device" in Device Manager, when I connect the device to the USB port.

  3. the last time (in 2012) when I upgraded the OS on the old XP PC to Win 7 hardware, the operating system recognizes the device even without installing the drivers (i.e. for Audigy 2 ZS of Creative) and he has been active (usable), as soon as I plugged the same. However, later I applied Win 7 64 bit drivers from the Creative support site. Now, even though I applied the drivers for Win 7 64 bit for the device, it is not recognized under Windows.

  At the config of my old PC: Intel Core 2 Duo CPU E6540, card mother Intel graphics card Nvidia GT 220, some hard drives SATA 2 x 250 GB, 8 GB of RAM.

  At the config of my new PC: Intel Core i3 (3rd generation), card mother Gigabyte, graphics card Nvidia GTX 650, SATA 1 x 1 TB hard drives & 1 x 250 GB, 8 GB of RAM.

  I understand that this question, referring to the Creative device, should not fall directly under the responsibility of Microsoft, however, I looking for entries from anyone who may have any suggestions or is faced with identical situations / similar. Thanks for the patience to read this long query.

  -Milind

  BossDweebe,

  Thanks for the suggestions. The origin of difficulties - the PC also has graphics card Nvidia GTX 650 and as part of the package of drivers for this graphics card, HD Audio driver (Nvidia) also was installing. This HD audio driver not allow Creative Audigy 2 ZS on USB to be recognized as an audio device. So I had to remove the HD from Nvidia audio driver and then install (an update) Creative driver for the device. It worked.

  Thanks for your suggestions.

  -Milind

• Problems downgrading from Vista to Xp - Sound Blaster Audigy Advanced MB not recognized

  Hello

  I have an Inspiron 1520 provided with Windows Vista Premium.

  I downgraded to XP Pro. Everything seemed great until I noticed a beep instead of each sound.

  I tried to install the driver 92xx Sigmatell from the Dell website, but it does not work.

  I have the original for Vista "Audigy Advanced MB" drive but it does not work with XP.

  Anyone know where I can download the driver for my sound card?

  Any suggestion on this subject?

  I tried to reset the Bios and installing the driver Audigy 1, 2. Nothing has worked so far.

  Thanks in advance for any help!

  
  

• Mozilla does not sound at all applications (youtube, videos...). Have uninstalled and went back to install mozila and nothing! Have uninstalled Fash Player and returned to install and nothing! Can you help me?

  (Excuse me for my bad English)

  See:

  • https://support.Mozilla.org/KB/no+sound+in+Firefox
  • https://support.Mozilla.org/KB/video+or+audio+does+not+play

  You can click on the Volume icon in the Windows taskbar near the clock and click on the link to mix down to open the mixing console.
  
  You can adjust the volume level for each application in this window, so make sure that Firefox is not set to mute or set at a low level.
  
  The current versions of Firefox using the process of plugin-container to run plugins, check the volume control for the process of plugin-container.
  
  You will see the program Firefox or the Plugin Container in the mixer if you are on a website that plays sound.

• Integrated Satellite L655 webcam microphone does not sound

  So my L655-S5150 stopped all of a sudden pick up sound. I tried to update, but it says I already have the most recent update. I went to control panel > sound > recording tab to test the microphone and it doesn't respond when I hit the back of my laptop.

  Does not meet my voice or any other sound.

  Help please?

  How do you use your cam?
  Do you use it with Skype or MSN?

  Have you checked the sound for some applications properties if you use one of them?

• Tecra M4: EasyGuard advanced instant security - alarm does not sound

  Hello
  Instant EasyGuard Security Advanced
  I followed the instructions to the "request of Iris' to support Toshiba, but the alarm will not sound.
  I know that the motion detectors work because if I shake the phone enough, the hard drive protection popup will be displayed.

  I even confirmed that the wav file that is listed in the registry exists.
  Does anyone have ideas, what I can check next?
  I already reinstalled all the toshiba utilities in the hope that could fix it.

  Hello

  I put t know which unit you have (European or US model) but ask Iris is written for portable Setup US and the preinstalled image is not the same as on European models.

  I checked the Tecra M4 user manuals and it is not listed as this device is equipped with advanced instant security. You see using indicated such CrossMenu about US page?

  Either way, you make a small mistake. In your ad, you have written two different things. Please check HDD protection tool settings and you will see that there is no option for an alarm. What you're saying is a tool separately, but I'm not sure that it is a part of the package of software for your device.

• HP Pavilion g7 1178 AC: windows jingle/tune does not sound and the start up programs do not start before the RESET

  When I start my computer, I have the lock screen, enter my PIN and then nothing really happens, I get all the blank screens or error messages just my old image of the windows desktop 7, then I RESTART my pc and then I get Windows Small Volkov song/jingle/air once it starts again , then my lock screen and then my start up programs start at work, bitdefender, toolwiz and things are working properly.  I removed my old windows, clean up the files using the disk.

  I do not understand why the windows little tune does not make its sound until I restart?  Does this mean that windows is does not start properly until I restart?  And would that be why my bitdefender is does not properly start as well. ?

  I checked in the Task Manager after the first start-up, he said that the two programs have been activated, but they do not work properly.  I checked bitdefender and it also says that it is on the startup list, but why he doesn't have the things I have planned to start rebooting?

  It is very frustrating having to start my pc, wait a while, then do a reboot to get things every morning.  Suggestions, ideas, help would be greatly appreciated.

  Thank you for your time, sincerely, Niki

  I too was wondering why * nothing * played, even when I had checked the box "Play Windows startup sound" in the advanced sound settings > Sound > sounds section. After a LOT of research (that brought me here, among others) here are the "definitive"...
  
  "By Raymond Wong2015-07-31 13:30:22 UTC.

• No audio audio on computer. Fix Center indicates the problem, my audio doesn't work does not sound and manufacturer-both required

  I have an acer CPU. I might delete something that caused audio does not run correctly, but not sound. Speakers are plugged.

  Install the audio for the brand device drivers and the computer audio device model you have.

  (Without device drivers, the operating system has no idea how to talk to the audio device * and * vice versa.)  We can speak English, the other Swahili.  If no member of the House can translate, then you get just a lot of weird looks.)

• microphone is detected but does not sound pick up.

  I am using a microphone with my computer.  In the dialog control sound control panel it says microphone "works".  It is not muted and the volume is completely.  However, when I talk into it, it does not record that there is no sound input and bars do not move up and down as they should.  So of course, I can't save anything, because there is no 'hear' me.

  I've been Googling this all day and I feel very embarrassed that I can't understand it :(

  It turns out that, it seems that it was the microphone itself that was the problem.  I went and took my brother to another mic and it works very well.  Ugh!  Sorry to have wasted your time with my STUPIDITY.  Thanks for the suggestions, I ended up updating my drivers anyway, so I guess that some good came out of it ;)

• Does not sound

  Hello.
  Now, I did a music player for a website. When I tested (in preview) it in flash that he does not play with sound. However, through the external swf player he played with sound as expected. So I downloaded it on the server, and as you can guess, it didn't work. It is not part of the main .swf, the music player is loaded on a level above him. The strange thing is when I type the name of .swf in the browser, loading itself, the sound works. Can anyone help?

  Jeez. did you read my first post before that you did? do you understand my first message?

  If you think that the answer is Yes to both questions above, then where did you did what you say, you did? specifically, where did you used

  New Sound (this);

  Instead of

  New Sound()?