speech recognition dictionary

Similar Questions

• Speech recognition in labview

  HY everybody

  I'm new to labview. My project consists of elevator system of speech recognition. My first task is to go ahead with the speech recognition. I really need help.

  Concerning

  Kunal

  There are two ways to achieve speech recognition in LabVIEW... One way is to use the existing Microsoft Speech API to acquire sound and generates the text in order to compare the text with the input string. The other way is to acquire sound in LabVIEW, proceed with a signal processing to generate spectral components and store them in a matrix of dictionary and match then the input signal with the signal stored to power output.

  * Thanks to Bravo ^^ *.

• How can I get speech recognition to work with text to train my voice, the way which the tutorial done?

  The tutorial of speech recognition to train my voice is not large enough for the engine get good recognition of my voice. I want to put in place a couple random pages of text (like a novel, etc.), and that I dictate the words in the program he would coordinate the words I read with the text I was reading from and type what I read to show how he got trained.

  Here is the translation of the above using the voice recognition program.

  If this tutorial from speech recognition to train my voice is not a large enough for the motor get a good and recognition of my voice.  I want to put in place a couple random pages of text (like a novel) which does not run and I dictate the words in the program that he would coordinate the words I read the text I was reading types of what I read, that the show has done which forms

  The foregoing would take a lot of editing, which I already did a large part of. Also if you change the type of microphone that you are using, you could start any training.

  I'd be cool if (with headphones), you might get feedback that the program thought you said so that you wouldn't be constantly replay to see if it came out correctly.

  Hello

  What version of the windows operating system is installed in the computer?

  Method 1:

  I suggest you to see the link (it is necessary for windows 7)

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-NZ/Windows-Vista/troubleshoot-speech-recognition-problems

  Method 2:

  If you are using windows 7, I also suggest you to see the links and check.

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-speech-recognition

  Common commands in speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/common-commands-in-speech-recognition

  Add or edit words in the speech dictionary

  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-words-in-the-speech-dictionary

  Dictate text using speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/dictate-text-using-speech-recognition

  See also:

  Setting speech options

  http://Windows.Microsoft.com/en-us/Windows7/setting-speech-options

  Set up speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition

• Speech recognition does not recognize dictated.

  Recognization of speech is dictated not recognized as dictation, includes only orders. It is a novelty because when I started using it it worked fine. The microphone is very good because he always hears commands and responds correctly. Any ideas? Please, I beg you.

  Hi Mlee,

  Control Panel-> speech-> speech options Advance open pick and choose the language (English in the United States). Try the word by far.

  There are several ways to correct mistakes made during dictation. You can say "correct that" to correct the last thing you said. To correct a single word, say "correct" followed by the word that you want to correct. If the word appears several times, all instances are highlighted and you can choose the one you want to correct. You can also add words that are often misunderstood or not recognized by using the speech dictionary.

  To use the alternates Panel dialog box

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Do one of the following:

     • To correct the last thing you said, say "correct that."

     • To correct a single word, say "correct" followed by the word that you want to correct.

  4. In the Group of alternates dialog box, say the number next to the item you want, and then on "OK".

     Note

     • To change a selection, in the Group of alternates dialog box, say "Spell" followed by the number of the item you want to change, click 'OK '.

  Use the speech dictionary

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Say "open Speech Dictionary."

  4. Do one of the following:

     • To add a Word to the dictionary, click or say add a new Word, and then follow the instructions in the wizard.

     • To prevent a specific word of dictation, click or say prevent a Word from dictation and then follow the instructions in the wizard.

     • To correct or delete a word that is already in the dictionary, click or say change existing words, and then follow the instructions in the wizard.

       A speech profile has not been created. You can train your computer to better understand you by creating a voice profile that your computer uses to recognize voice commands.

       To create a voice profile

       1. Click to open speech recognition.

       2. Click Train your computer to better understand you, and then follow the instructions

          Thankzzzzz

• Can I use speech recognition to dictate something pre-recorded device

  I tried to use speech recognition to dictate a few minutes of a recording on the computer device...

  Hello

  Yes, you can use speech recognition to dictate words that are recorded voice message before.

  For more information, see the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition

  Dictate text using speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/dictate-text-using-speech-recognition

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-do-with-speech-recognition

  Add or edit words in the speech dictionary

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-edit-words-in-the-speech-dictionary

  Turn on dictation for all programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-dictation-for-all-programs

  Windows speech recognition

  http://www.Microsoft.com/enable/products/windowsvista/speech.aspx

  It will be useful.

• Words are displayed automatically while dictating to speech recognition

  Original title: speech recognition
  My speech recognition works very well except for a really irritating problem. If I fall silent, it will print a series of... of... or if if if. I am very experienced with speech recognition - I used the Dragon for years and have a very good headphones so what goes wrong? If I say 'new line' it will always put a 'from' front the word I say to start the new paragraph. Help please?

  Hello

  Are what program you trying to dictate to the breast?

  If you use a third party software, then try to use Word or Notepad and check if it makes a difference.

  If you already use speech recognition in Word, you can use the speech dictionary to exclude these words (which appear automatically) dictation. You can also
  Add words that you frequently use that speech recognition does not recognize.

  To open the speech dictionary:
  a. make sure that speech recognition is running and then say "open Speech Dictionary."
  b. click or say add a new Word or prevent a Word from dictation and then follow the instructions in the speech dictionary Wizard.

  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with speech recognition in Windows 7 and MS Word 2010 - strange window opens

  I have been using speech recognition in Windows 7 to dictate in Word 2010.  Yesterday it worked fine: I did a number of training records, added a few new words in the speech dictionary and dictated a part of a document.  No major problems.

  Today, however, when I begin to dictate, rather than insert the words directly in my Word document, a secondary window will appear next to the insertion point and text appears here, with small buttons that say "insert" and "Cancel".  It's rather annoying - get the text dictated in the document, I must stop dictating and say "insert."  Is it possible to prevent that from happening?  As far as I know, I don't have any changes to the settings or program options to cause this.  Help!

  Thanks for the answer, but now I can't seem to reproduce the problem.  I don't know why what started, but it doesn't seem to be the case more.  Thank you.

• Qosmio X 500 does not hear me using speech recognition / microphone

  Hello!

  I often use the voice recognition feature Win7 Ultimate.
  However, since a few days, the computer does what I say more.

  Now, the built-in microphone is very insensitive: I have to get as close as in 10-15cm from the microphone in order to get acceptable results. I don't know what has changed... never had problems before.

  When I try to do speech recognition, training my computer just can't hear me (at least it seems that Yes)...

  I don't know what to do...

  Thanks for your help!

  Concerning
  Mario

  Hello

  I think you should check the volume level of the microphone.
  Go to control panel of-> sound-> recording tab

  Here you can see the Microphone device.
  Now, check it and click on the properties button
  Now new window pops up and here you have to choose the 3nd tab
  Here, you can increase the volume of the microphone.

• Satellite A30: Software Dragon Naturally Speaking speech recognition does not work!

  I am unable to get the speech recognition program 7.3 Preffered Dragon Naturally Speaking version to operate successfully on my laptop Satellite A30 P4, using Windows XP as the operating system. It works fine on my PC of similar specs as the Satellite A30. Speech recognition is very poor indeed with the Toshiba laptop. He was sent to the seller twice, but the problem is still not resolved. I know that this Dragon program works fine on other laptops.

  He is also unable to play some of my CD.

  I would like to know if the portable technology is unable to operate with Dragon speech recognition, or is the problem with the A30 series or with my specific computer?

  What characteristic specifications are necessary for the performance of Dragon with success of the Toshiba A30? This microphone is necessary? How many and what types of RAM? An additional sound card can be inserted into the laptop to improve performance?

  Help, please! Anyone with experience with Dragon speech recognition? What could be the problem of CD?

  [Edited by: admin on 19 June 05 14:33]

  Hello

  It's specific software problem and it is not easy to tell what can be the problem. In my opinion, it may be that his card on this unit has no performance you want. Sorry but I have no other explanation.

  These problems can be solved simply by contacting the producer of software because they have much more experience in troubleshooting.

• Satellite M300: speech recognition only works with external usb hub

  Hi all

  I have the Satellite M300 I could run the speech recognition program before you have the motherboard replaced due to failure of the usb.

  I found using the headset, I can not reach high enough quality to operate it.
  The only way I can use the Word program, use an external usb hub with its own power supply.

  The problem concerns the audio card, or simply not enough voltage?
  And na fix?

  See you soon

  Craig

  Hello

  The notebooks of USB ports provide a standard power of 500 my.
  As I said that it is a standard, but in USB devices different part 3 external cases need more power.

  For example, one of my external USB 2.5 HDD s must be connected with two USB ports at the same time to ensure that the HARD disk would get enough power to function properly.

  Your external card is unknown to me but maybe it needs more power as usual.

  Welcome them

• Speech recognition works on my iPhone 6 for the purposes of Google, but not to send SMS or e-mail features.  Why?

  My iPhone 6 works fine except a feature.  When I use speech recognition to enter text or compose an email, the hourglass turns for a bit, but nothing fills the field.  On the contrary, when I use the same function on my Google app, it works great.  No idea why it's happening or how to fix it?

  Hello PWBMN,

  Thank you for using communities of Apple Support.

  I see that speech recognition in the Messages does not work correctly.  To start, I suggest that you force the Messages app to quit smoking and then follow the directions below.

  After each step, see if you still need help:

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled under settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  7. Contact Apple support.

  Use Siri on your iPhone, iPad or iPod touch

  Take care.

• speech recognition tutorial

  I have a Pavilion HPE-210Y running Windows 7.  I got this machine since June 2010.  I just found out that hp has included an application of speech recognition with this computer.  I installed it without any difficulty.  The app offers a tutorial.  I loaded the tutorial and found it very useful.  I stopped at halfway through the intention to come back after lunch.  When I returned to the computer I could not find the tutorial.  I spent hours trying to find it.  I'll definitely be grateful to the person who can tell me how to get there again.

  The Help menu in the application of speech recognition has a link to the tutorial.  I don't know why I didn't see that earlier.

• Uninstalling speech recognition

  I have a laptop HP Compaq - Presario CQ57 and have recently installed speech recognition.

  I am not happy with this and you want to uninstall in its entirety.

  I was in Control Panel and raised the program but it doesn't seem to be an uninstall option.

  Could you please tell me?

  Lorrym

  Hello

  Please try the following:

  «Make sure that you are not in classic mode when using the Control Panel, so go in Control Panel after saying that click on ease of access, then click 'recognation of speech options', and then in the sidebar on the left, there should be a link to "advanced options speeches", it should be "Text to Speech" link above.» click it then tab recognation speech, in user settings, uncheck the box for the start or edit anything you want! »

  Lots of discussion: http://answers.microsoft.com/en-us/windows/forum/windows_vista-pictures/how-to-disable-speech-recognition/b58d8e04-eacb-43dd-8708-a38cb6d5b8d1

  Kind regards

• speech recognition of labview and Arduino

  Hello

  I want speech recognition with Labview and Arduino. I have already install driver of Arduino and test it in Labview. I want to ask if it is possible to guide me if I want to use hidden Markov and algorithm of ANN, what should I do. In fact, this project is belongs to the robot by voice control, but my knowledge of labview is not so.

  Hello Mohammed,.

  Are you familiar with the theories behing Hidden Markov Models?

  A good starting point would be, for example, this document:

  http://sites.stat.PSU.edu/~Jiali/course/stat597e/Notes2/Hmm.PDF

• French speech recognition on Windows ITO?

  Hi all

  I developed a Windows 10 as a CEP application. This application uses speech recognition to the french language. Now, I would like to use this app with my raspberries FT2 and Windows ITO. But in fact, the speech recognition on Windows ITO only works for the English language.

  Do you know if it is expected that the languages (such as french) are added on Windows ITO for speech recognition?

  Thanks for help.

  Samuel LIOULT

  Hi Samuel,.

  I suggest you post your query in the following forums to improve assistance in this regard.

  https://social.msdn.Microsoft.com/forums/en-us/home

  Thank you.