Speed of reading/Preview/timeline?

Similar Questions

• a speed of read/write DAQ card mode change will reach 200K

  HEY, man,

  I have a project needs to test two points I name them point A and point B, the first time, I should point A 5V DC input, voltage inductive test point B, sencodly, give point B 5V DC input and inductive point test output voltage, this means and two analog ports must read and write sharing mode , and the test speed must be 100 KB, if I have a 200 KB data acquisition card, can the speed of read/write mode change reach 100 KB for an analog port? or, please give your suggest for my this kind of situation, thank you.

  Hi API,.

  I see that you are trying to measure voltages using a single channel at a time on a data acquisition card.

  Unfortunately, you cannot change the inputs to the outputs or vice versa on a map of data acquisition, they are static.

  What I recommend is either using a switch like this: http://sine.ni.com/nips/cds/view/p/lang/en/nid/207130 where you will need a high chassis.

  Or, having four channels, 2 inputs and 2 outputs and try to measure it. You should have the necessary speed as well.

  If you have any other questions, I'd be happy to answer.

  Thank you very much

• How do you know the speed of read/write of a flash drive?

  Who knows a program to read/write speed?

  Hi Cristi,

  Thanks for posting in the Microsoft Community.

  An indication of the standard flash drives read/write speeds is the following:

  USB 2.0:

  Sequential write speed range = 4-10 MB/S

  Sequential read speed range = 15 to 25 MB/S

  USB 3.0:

  Sequential write speed range = upto20 MB/S

  Sequential read speed range = upto45 MB/S

  These reading and writing speeds offer a guide to the read/write Flash Drive performance and have been identified in recent tests. Please note that we are changing the components USB Flash Drive at any time based on the availability and cost. This means that the read/write speeds above cannot be guaranteed.

  You can use your favorite search engine to search for this application that measures the speed of read/write of flash drives.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How to synchronize the chronology of reading preview with the project timeline?

  Hi, I have used a number of video editors in the past and now trying on Adobe Premiere to see if it is any good. It looks very good so far, very professional and get rarely crashes. Currently there are about the thing that bothers me in it and I hope you could help me how to sort. It is not really easy to explain what I mean in words, but I'll post a screenshot at the end of this post that should help you to get the idea of what I want.

  Most video editors have their timeline to preview (Adobe calls tab "program") to automatically update when you have added several images in the project. Then if you add a video file only 5 minutes in the project, then preview will end in 5 minutes. But Adobe has a certain value of preterment, so preview will continue to play beyond 5 minutes mark and just show a black screen, as if you had something at the end of the project. I ask how to get rid or adjust this value, so preview would synchronize with the chronology in the length. The reason why it annoys me is because I want to fast-forward to about 80% of the current project, just to note that I sped up 5 minutes after the last video of the project. I know that I can simply fast-forward using the timeline, but it is not very comfortable for me.

  I made this screenshot, which should help you understand what I mean.

  

  The time will appear in the lower right corner angle of the program monitor reports that the sequence is 10:01:19 - located 10 minutes, not 5.

  You seem to use CS6 (or earlier), in which the program monitor doesn't automatically adjust the zoom to the length of the sequence. This was changed in CC (7.x). So you can basically ignore the fact that the playhead is only at half way through the visible prescription. If it really bothers you, then you can manually zoom in to only show that the actual duration of the sequence.

  As for playing beyond the end and showing black images, play you literally the sequence? If so, then it should stop at the end of the sequence. If, however, you are actually rub (by clicking and dragging the read head), then you can rub as much as you like beyond the end of the effective content.

• AfterEffects will not be made video at full speed of reading.

  Hello

  If I hit play on a video and let it make (leave the timeline green) when it finishes rendering it will max at about 20 frames per second, only reaching don't not 24 p complete. IM wondering if this is a problem in the program, or with my computer, or even a setting I need to change. I doubt it's my system because it seems that my system is powerful enough to read pro res 422 video without affecting it to 24 p.

  System Specs:

  MacPro mid 2012

  2 x 2.4 GHz 6-Core Xeon

  12 GB of ram

  NVIDIA GeForce GTX 980 (with the latest drivers from web and compatible drivers cuda)

  Yosemite and the latest version of the AE.

  Any help is appreciated, thanks!

  At full resolution, your space bar won't read at full speed on most systems. Set the zoom factor for the Panel model, the first option below to the right, to 50% for a model of the HD, and the resolution of the model at the auto and you might get playback 24 fps. AE is not a publishing and application until all of the rendering engine changes, it is probably not a good idea to wait real-time everything except a ram preview playback.

  If your ram previews take much longer time it takes to render the same number of images by pressing the space bar then your memory and MP settings are probably not right.

• increase speed visa read write

  Hi guys,.

  I use the visa read and write the example, but I am facing a problem when using it in a software expansion, and I can receive only date when the vi has been slown down (using the bulb).

  The program really works on her own with the defined settings.

  So, do you have any ideas/suggestions on how to significantly increase the speed of this vi (joint)? In addition, it seems to create a problem with the playback of data

  Thank you very much

  Kentmey

  Roll bytes to the port and the delay.

  Rely on the chariot of the termination

  Use a number larger than the bytes expected.

• Sony ILÇE-7R - what is the speed of read/write in the camera

  I have several Sony ILÇE-7R cameras used for a given application where more than 80 panes in a row with 1 second interval occur.

  When you are taking pictures on a 1 sec shutter time / 1.2 s, then the camera tends to slow when writing the buffer on the SD card. (A suitable high-speed sdcard has been used).  When the buffer is disabled on the SD card, then the camera accepts no any command of the shutter (IR Led or cable gives the same question), so I'm missing components/images.

  What is the read/write speed in the camera?

  What are the compensation of buffer time?

  Are there settings that can improve the buffer time on the SD card, while taking still pictures of compensation?

  Is there firmware settings that have been implemented to improve the write speed camera?

  Thank you very much

  Kind regards

  
  

• Help, please! Imported MP3 playing at twice the speed of reading!

  Hey there,

  I am a newbie. Import an MP3 to edit a music video for. Have done this process before on another project with zero problems. However on this new project, when I import the MP3 file, it plays too fast in reading. Not exactly twice the speed. It jitters and removes words and jumps back in places.

  Jesse

  Covert mp3 wav and then import into Premiere Pro.

• Interpret the images to get slow mo vs speed setting in the timeline

  I shot a bunch of video for a 'live' style music video I put together. This will be my first of those, so it's a little experience. I shot it at 60 fps (59.94) with the intention of the final product being a video of 30 frames per second or maybe even 24 fps, but with all these additional images to create some nice slow mo here and there. The problem is that a lot of it has been saved just all at once, so there may be parts of a clip I want at regular speed and in the same clip I want to be slow. I might want to same ramp from one speed to another, but that's another question.

  I know two ways to get slow mo:

  (1) interpret images such as 29.97 or 23.9something to get the slower speed

  (2) changing the speed in the timeline panel

  Is there a difference between the two methods? The first is more pain because it means I have to reproduce each of the clips if I want to use two clips of normal and slow speed. But if the other is using an interpolation rather than the actual recorded frames, then I would rather have the hassle of the first method. If it is not, however, does mean that I can safely use keyframes to ramp from one speed to the other? Thank you!

  It there is a difference between the two.  Interpretation to match the settings of the sequence will show all images, no interpolation.  These are the best results you can get.

  In setting sequence at any frame rate, not corresponding to the sequence will show interpolation, and which includes speed bumps.  In the past these results were not as good, but with the addition of optical flow, that difference in large part has been reduced to nothing.

  My advice would be to test you each method, make observations, and then you will know which is best for a given element.

• Can I change the speed of the preview?

  The audio in the sounds of overview as a disaster. After the export as AVI, it's in the quality and the initial speed. I don't want to change the speed of the file, just the speed of preview.

  Can you help me?

  Thanks for your help! I don't know why, but it works now...

• How to read my timelines of i5 computer Win10 laptop from Dell on 42 inch Samsung monitor

  Hello

  Two questions relating to how I first Pro CC 2015 playing on my Dell Windows 10 Core i5 laptop, on a big screen of 42-inch Samsung.

  (1) I have not yet connected the laptop to Samsung TV, but I have 2 methods of possible connection - HDMI and USB.  Which is better? I have an Intel HD 4000 graphics card: it will be ok at least (because not planning on big charges at this stage thank you)?

  (2) once connected, how to choose the Samsung 42 inches as the monitor of playback of the timeline, that I'm currently working on?

  Thank you very much

  It works perfectly now. Here's what I had to do:

  Connect using HDMI between the laptop and Samsung TV (aka 42 inches)

  On the laptop, click on 'Windows key' and 'P' and select 'extend' (this allows Samsung to become 2nd monitor

  In first pro, reading now allows Samsung to be chosen as a monitor

  Audio playback also allows Samsung to the audio (if required)

  Now the pleasure with the installer...

• Optimal settings for reading HD timeline?

  Suggestions for playback high definition of the timeline?  Seems a little choppy. The timeline export files very well however. ?? I have Win 7 64 bit i7 980 X @ 3.33 6 12 GB of RAM 1600DDR Radeon 5850 GPU core. Is there a BIOS setting that could be changed?  I had a serious problem with my RAM, but now it is fixed.  Frustrating that I have a system of first order with ugly reading. Also, is there a way to reduce and spente on this forum? Merci !   

  And, as well as make files Audio files are compliant (CFA) and PEK (waveform display) will also be in the media Cache. They are necessary for pre effectively and precisely edit Audio. This ARTICLE will give you a little more background.

  Without doubt the ultimate allocation of HARD drives would be:

  C:\ Operating system, programs and probably virtual memory Windows (file)

  D:\ Projects and scratch disks (Cache media, etc.)

  E:\ Files/media files

  If we had only two physical disk (not partitions!), they would combine D:\ & E:\ above on the second HARD drive.

  Now, I get the above in many cases, as I migrate projects between computers, so I use FireWire 800 HARD drive, and in this case, assets, projects and Scratch disks, are all on these external HARD disks. I pay a small price in the performance area, but this allows me to work on a project on the laptop and then move it completely to the workstation. In my case, external references each have a single drive letter assigned, and it fits in the operating system on each computer.

  Good luck

  Hunt

• How can I adjust the speed of reading podcast on Apple TV 4?

  POdcasts are now playing at half speed or slower on my Apple TV 4. I was all control with a universal remote and somehow changed the playback speed. I initially has the speed to 2 X normal and then managed to do play a.5. This affects all the podcasts and persists after restarting.

  How to restore to the normal playback speed?

  I had the same exact behavior. The only thing that worked for me to restore the correct playback speed is to reset Apple TV.

  I spent an hour on the phone with Apple tech support on this issue tonight (January 26, 2016) and no alternative surfaced. And we have tried almost everything.

  I personally just believe Apple left the control of playback speed of this version 1.0 of the application, while our universal remotes (mine is a Logitech Harmony One) have the ability to accidentally (although irreversibly) trigger the function.

  If Apple contact me with a solution, I come back and post it here.

• Maximum speed of read/write taken supported Sony Xperia Z2 for MicroSD cards

  I am looking to buy a microSD for my Xperia Z2 phone (6503). My question is: how fast it can write data to an SD card. For all I know, these speeds are dependent on the controller of the SD card. If I'll know it approximate numbers I can acquire an adequate microSD card. Right now I'm trying to decide between: SanDisk SDSDQX - 064 G-U46A Extreme Plus 64 GB - 80 MB / s GB SanDisk SDSDQUA - 128 G-G46A 128 Ultra - 30 MB/s write for these microSD cards speeds half accelerated indicated reed are numbers. I like 128 GB Ultra card capacity, but would not hesitate to buy faster 64 GB card of more extreme.

  If you use 4K as recording features, you may need to get a high speed SD! (go to the Maximum speed you can)

  So I think that like extreme would be preferable in this case, but if your phone is what use you (like me) the maximum capacity (which has better speed as well, if not useless) I use a class 10 128 Go!

  Like many, I know, I think that same 30 MBP will be sufficient for a 4K video!

• Speed up the preview of loading external HARD disk?

  I have my catalog and my pictures stored on an external hard drive. I'm reviewing right now a few more old photos, and I find that it takes quite a long time to load the previews.

  For example - I click on a folder that has about 300 images inside. If I go to view grid to the preview screen, it loads the thumbnails for the images that appear on the preview screen, but nothing after that. I scrolled down, and it is the responsibility of these previews. Scroll again, more load.

  Moreover, the same thing happens with the film down. I tried to scroll to the end, but it seems to load only the previews that are currently visible in the preview screen or film.

  Is it possible (short 'intelligent Preview', and I don't know even if that would do the trick) to just say "load all previews at the same time". The initial charge would take more time, but it saves me the trouble of having to wait while scrolling.

  Try putting the catalog file and previews on your internal drive, see if that helps.

  Try render 1:1 previews and keep them indefinitely.

  Forget the intelligent insights, which are unrelated to this problem.