Speed of slow PC and jercky?
Speed of slow PC and jercky?
Make sure that there are no viruses by downloading avast!
1. install avast! Anti-virus http://download.cnet.com/Avast-Free-Antivirus/3000-2239_4-10019223.html?part=dl-85737&subj=dl&tag=buttonhere.
2 open avast! To register for the free version.
3 run a scan to the powerful start by clicking on "Computer Scan" then click "Start scan".
4 click on 'Calendar now' and restart the computer.
Important: If nothing is detected, type 4 "Move to chest" or 5 'move to the chest.
If something is detected and you moved to the answer from chest to my post.
Perform optimizations using Advanced Systemcare 5.
1. go to this link http://download.cnet.com/Advanced-SystemCare-Free/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=button.
This will install Advanced SystemCare 5.
2 open Advanced SystemCare 5 and click on deep treatment.
3. check all but deep Fix Registry, defragment disc and difficulty of vulnerability for faster optimization.
4. open the "Start" menu and click on the run"" option. Type "msconfig" into the "Run" dialog box and then press enter on your keyboard or click 'OK '.
5 click on the "Startup tab" scrolling through the list of programs and clear the checkbox next to the programs you don't want to start up to a faster start.
6 click on apply or OK and restart the computer.
If you have any questions please reply to my post.
Download Slimdrivers. This will install easily all outdated drivers.
1. download Slimdrivers http://download.cnet.com/3001-18513_4-75279940.html?spi=b4c90ec57e5b8760ff2680854c1a7cfc.
2 install the program and open it.
3 click on 'Start Scan '.
4 when it detects updates, click Yes to create a system restore point.
5 does not restart until all updates are made.
Note: Do any audio driver updates last!
Tags: Windows
Similar Questions
-
Qosmio G20 slow start and restart
My G20 becomes slower and slower when it starts. I still like the laptop and it s design still makes me believe s the laptop more beautiful that I've ever seen (in my opinion still improve the design then the new Qosmio s).
So I m using 80 GB hdd2 in each total of 160 GB disk...
I m using now 72 GB in a HARD drive and 10 GB on the other. So much free space in a single disc, but the laptop is too slow start about 3 min.I t n planning restore and clean the system of all the
Any advice? Gather the HDD0 and space of two disks will be more fast laptop?It s 2 GHz speed and 2 GB memory.
Thank youHey Buddy
You slow startup and startup has nothing to do with the HARD drive space.
Your laptop could start slowly, due to a large amount of processes that run in the context of the operating system!What you could do, is first the msconfig and disable unnecessary applications in the Startup tab.
Use some applications cleaning CCLeaner (tool free) i.e. to clean the operating system and the registry. Last but least could not defragment the HARD disk to improve performance.
See you soon
-
Download speed very slow wireless on Qosmio x 500-10T
Hi all
Just upgraded to a Tosh Satelite to a Qosmio X 500-10T - thought this would solve problems of speed, I got with the old machine using XP and a Belkin (g) wireless network adapter for the (n) on the Qosmio. Everything worked OK with the old Tosh but the new Qosmio is a disaster.
I went through all installation steps, read all the forums, the updated drivers, but still, I get 50-80 Kbps when using the wireless. When I connect using cable, I can get all that Virgin can send me (app 2 MB, up to what I've upgraded, [when I can get 2 MB])!
I tried the setting on my router (linksys WRT300N), it was capable of serving a Vista PC (wired) and two laptops, a Vista the other my XP, two laptops on wireless.
I was wondering if Windows 7 has nothing to do with the problem but I don't see what parameters can be wrong or is it just not compatible with my router. Someone has an idea of the required parameters, or is there a digitization program I can run that will tell me? (I don't want to have to drag a cable around the House!
Hi Gallan,
If your WLAN speed is slow, you should try the following instructions but first of all make sure that your WLAN driver is up to date and it can be downloaded directly from Toshiba:
-Updated the BIOS to the latest version
-Disable management feature in Windows to energy WLAN power management
-Put the router and the laptop N project only
-Try with other encryption, e. g. WPA2
-Update the firmware on your router
-Disable the MAC address filtering and other security featuresI hope that helps!
-
Very slow start and run for Dell Inspiron 6400 XP times
"I have a problem with an Inspiron 6400 brought to ' horribly slow start and run time. XP Pro 32 bit SP3 patched up to date. Cleaned up a lot of "undesirable", as the partially uninstalled programs, cleaned the files temporary etc. with CCleaner, cleaned and optimized the registry afer all the cleaning has been done, defragmented, tried to start without any of the boot files, disabled all unnecessary services and uninstalled virus checking software, (but ran several anti-virus controls) etc. - no help. Safe Start Mode is faster, but... not at all normal - 1 1/2 minutes of screen to logon instead of close to 3 minutes. A lot of memory (2 GB), which rises to 600 to 700 MB runnng all the stuff I've tried. Hard drive is 1/3 used out of 120 GB with a 2 GB swap file.
One thing I'm still scratching my head over - beyond the horribly slow boot - is very slow access to files even though everything seems to work normally, but as molasses in January. Looking at the performance of the Task Manager tab when I run a copy of a file (whether via a cmd window or with Windows Explorer), I see a near max processor would be and the other with a small business. Even if the customer says he had been getting worse for some time, after checking and cleaning of all things 'normal', my next thought was perhaps a bad disk or disk controller driver, but chkdsk ran very well (although it took hours) even if I ' d I have already updated all drivers (and even the DVD firmware and BIOS) on the Dell web site. Oh, and I ran Dell Diagnostics (from bootable CD) updates all with no errors found. And access to the slow file even with symptoms had max-processor occur with a copy of the file on a USB key that seems to eliminiate the hard disk, the disk controller and the pilot.
The other interesting part of the display for a file copy task manager is that the processes tab simply shows System Idle 97 to 99%, with a percentage of casual for other processes as Explorer while I see 1 max out procesor on the performance tab. That the same copy on your desktop shows 3-4% of the CPU usage and who is with active antivirus software. I'm almost ready to fall toward a Windows reinstall, but would like to find the real reason behind this problem of puzzle...
It of almost as if he's using PIO instead of DMA disk access, but... don't know how/where to test this.
Look at:andSolved! Thanks for the links, especially to each other. An old but still a goodie!
For those who have enquring spirits (and anyone else who stumbles across this thread), the primary IDE controller has been set to PIO and locked it. Who would have thought that Windows slowly reduced the transfer speed, whenever he saw 6 errors on an IDE device until it has been reduced to PIO and then he locked it? But the procedures described in the link of winhlp.com showed how to solve the problem.
There are actually several problems that led to the final symptoms. According to KB817472, the Atapi.sys has been improved in XP SP2 only degrade the speed of transfer on 6 consecutive errors instead of 6 cumulative errors. And even though everything I have (Microsoft update) was seen and showed that this area was to SP3, I found that the driver for the controller layer IDE was the SP2 version. Someone ran sfc previously perhaps?
Oh, and I know now that the Task Manager process tab does not time processor kernal, but the performance tab. Good to know...
Thanks again to all who have responded. Starting at the time of connection-question now is 40 seconds. You'll love Untra DMA mode 5. There is still a lingering question in my mind, since I've had the same symptoms of slow copy of a file on a flash drive. Perhaps a link in some way to the way that Windows treats a flashdrive as a "drive"...
-
WRT110 wireless speed too slow
Wired connection from the computer to my new WRT110 Acer laptop to dual-core with 2 MB of RAM is really very fast. (G-band) wireless speed is slower than dial-up or slower. I can't use it yet! The signal is strong. How can I improve speed? My older work laptop Lenovo sitting right next to my Acer wireless connection is very fast.
No, not the firewall problem. I changed the MTU of 'auto' on 'manual' and changed default value of 1500 to 1300. I don't know what an MTU, but it is an improvement of the DRAMATIC speed on wireless.
-
laptop slow, freezes and "unresponsive".
Hi my laptop with Vista home premium, is very slow, continually freeze and "does not" to the point where it is almost impossible to use. I followed responses to similar issues dealt with on this forum and have run the sfc/scannow in cmd. It made me know that there was corrupt or damaged files, but when I try to analyze the entries in log file the program Checker (SFC.exe) Microsoft Windows resources, I am informed, I don't have permission to open the newspapers, regardless of how I try to "administrator." This mean the end of this pc?
Hello
Many files that SFC cannot resolve are not important.
Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN
put the command from below (copy and paste) in this box and her and then press ENTER.
findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt
who creates the sfcdetails.txt file in the folder that you are in when you run it.
So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
in Windows Vista
http://support.Microsoft.com/kb/928228This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
here. NOTE: there are probably duplicates so please only post once each section error.You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
(You may need to search sfcdetails.txt if it is not created in the default folders.)===============================================================
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Download speed very slow on the wired Ethernet connection
I am currently getting 200 Mbps down and 0.3 MB/s on my desk wired Ethernet connection. I should get 200 down and 20 upwards.
- On my wireless adapter on the same router, I have ~ 18 Mbit/s to the top and about 15 Mbit/s down, which seems that the wireless adapter works fine.
- I plugged in another computer with the same cable on the same router port and got the full speed (200/20), then the problem lies within my computer.
- I made a transfer of files to and from my computer to another computer connected to the same router and I got the full speed Gigabit times come and go.
I searched high and wide on the internet and forums, and that many people have had the same problem I have, nothing of the multitude of solutions worked for me.
That's what I tried without success:
- Uninstalled the Ethernet card, deleted the drivers, forcing the new drivers to install again. No change of speed.
- Carefully checked for Virus and malware programs (crossed the registry as well), but found nothing, and nothing has been installed recently other than windows updates.
- The only antivirus I have is Windows Defender. I turned off and turned off the Windows Firewall, but speed did not improve.
- I tried with IE, Chrome and Firefox, speed with different services and all tests show similar speeds. I also used FTP to a server I have, and the speeds were the same.
- There is no other traffic devours bandwidth.
So what I have gathered so far, it's that my Ethernet card works very slow only when downloading from the internet. Within my network, it works fine.
What is a service that does not work well? If so who? I am not knowledgeable on the use of all services. I checked IPv4 and IPv6 and they both seem to be configured correctly, but I can't say that I am certain of what "correctly configured" is.
These are my specs:
HP Desktop H9 - 1215t
Windows 7 Ultimate SP1
32 GB OF RAM
64 bit
Chip Intel i7-3770
Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)
I would really appreciate some help here because this problem I'm paralyzed.
Thank you for your time,
Tom
By George, you got it!
For someone who thinks he's good at Googling, I could sure use some improvements!
The key has been the link to explanation. While I had been close to my tests, this for shows that even when you sort-of-one little-peut-be-think you know what you're doing to keep your legs unless you know EXACTLY what you are doing.
The answer was definitely Large Send Offload, but it was a little more complicated, at least to understand what really happened. Neutralization of him gave the tour, but now I work with an active v2 and it works like a charm.
I will detail what, in my opinion, happened here for those who may have similar problems so that they (you) may be able to figure out, as all cards are different and may require slightly different settings.
I live in an area where so far the download speed over fast, I was able to get is 2 Mbps, on a good day, it's usually on average 1 ~ 1.5 Mbps. download speed is between 5 ~ 20 Mbit/s.
I do a lot of video work and I constantly have to download large files on my servers. I got the computer described above about 8 months ago, and my Age (2 years) one remained on my home network.
For a week or two, I was cursing my ISP because the internet was slower than usual and very glitch. I tested my speed and got 20 down and 0.2, repeatedly. So I went through the long and technology-challenged call representative to 'help' me, I was paying for 20/2. Only option was to wait a week for a technician to come out of my house, he stressed have shot my injurybut not before you ask me, that there are faster speeds to internet available in my place. 200/20 which is 10 times what I had, so of course I went with her. In doing so the representative asked me to Exchange my modem/router for a new handle faster speeds.
When I replaced the modem/router, I found that the download speed went from 50/0.2 (after the new request speed but still with the old router) to 200/0.3~0.5 with the new router. I also had a Cisco E2000 router that I turned into a switch, which was also bogged down internet high speed (now that they have been much faster). But still the download speed has not really improved.
This long and winding history is so that you (read this with a similar problem) might find the answer to your particular problem.
Looking back when I said that the issue was in my computer because that became high speed was not quite accurate. The 'problem' was beyond my router, if the solution was in my settings with the LSO parameter. The 'problem' was not really a problem since what I see (guess) that's happened is that my ISP has been updated with equipment, and the settings on my new pc has become a problem while paradoxically not so in my old pc.
My old pc equipped with a "Realtek PCIe GBE Family Controller" and the IPv4 LSO parameter turned on, that she was no problem under the new set of circumstances ISP. 200 / 20 Mbit/s.
Then when I compared the setting on my new computer, it never crossed my mind that the neutralization of him would solve the problem.
My new pc has a Atheros AR8161/8165 controller PCI-E Gigabit Ethernet (NDIS 6.20). This adapter has a setting "IPv4 LSO" more setting "IPv4 LSO v2" and "IPv6 LSO v2" décor. I don't think that my ISP uses IPv6.
In my quest to solve the problem, I placed all of the above settings to "Enabled", without success and in my fog don't reverse these settings.
With the 3 off, it worked fine, but I got a 5 ~ 10% improvement on the download speed with the LSO IPv4 v2 enabled and the other disabled.
There is no way representing the service provider on the phone could know this, so calling them would not / has not solved the problem. Even waiting a week for the technician most likely would not have solved the problem as it would be measured using a laptop full download and the download speeds.
I'm sure this will become a problem most current internet speeds that House are starting to soar (thanks Google!), so I hope this helps those who have similar problems.
To summarize:
Click on start->Control Panel->Device Manager->network adapters-> your adapter name (mine is Atheros AR8152/8158 PCI - E Fast Ethernet Controller (NDIS 6.20), right click and select Properties. On the advance tab, find good Large Send Offload (IPv4) and change its value to disabled , and then click on OK.
If you have a Large Send Offload (IPv4) v2 try to set that to enable (with either a handicapped of course).
I hope this helps!
And thank you George.
Tom
-
Network slows down and stops receiving data the halfway during the loading of a site or downloading
In windows 7, my network slows down and stops at the midway during the download or load of a site with the largest size. When I restart the download, the same problem occurs again. When I use a download manager I have to stop the download and then picks up the part were stopping to download and vice versa in order to finish the rest of the download to complete. This problem is only with windows 7 and windows 7 sp 1.
Hello
· Did you follow all the methods provided?
· You are using cable or wireless network connection?
Let us know if you have followed all the steps of troubleshooting mentioned in the previous post, and what were the results, so that we can help you further.
If you use try of connection through check wireless network and wired network. If a cable that you can try to use a new cable to see if the one you use has problems. If it is I'd see if anyone is leeches wireless turn off your connection. Note If you have more than 1 person on a 300kps connection there is no chance, you're going to both to have that kind of speed with a shared connection, especially if you use a hub, although I do not agree that a decline until 20kps is rare, it would not if someone is hogging the bandwidth of your connection.
Method 1:
You can also try to update the latest NIC drivers on the manufacturer's Web site and check if it helps.
Reference:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Method 2:
Try to release and renew the IP address, and check if this may help. To release and renew your IP address follow these steps:
a. open windows command prompt
b. Click Start - Run-type cmd and press enter
c. to release your ip address ipconfig/release , press Enter
d. to renew your ipconfig/renew IP address
-
my computer slows down and play music disturb when I open multiple windows
I wiped recently my laptop and since then, I've run all the programs that I did before, but when I open other windows when the music plays my computer everything slows down and disrupts the music. Any ideas would be great
HelloTry following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.Brian -
Sizes of mixed memory in Dell R710 to reach speeds of 1333 mhz and 800 mhz
We have some Dell R710 which was originally ordered with 48 GB in a configuration of 1333 mhz 12x4Go (RDIMMS). We ordered 6 sticks of memory of 4 GB 1333 mhz additional to complete all 18 banks for a total of 72 GB. The speed of the memory, then decreased to running at 800 mhz. We had immediately complaints on the performance in some of our mission critical VM (terminal Server and SQL DBs servers), so we have VMotion their due on a R710 still on the original 12x4Go config clocked at 1333 mhz and complaints went. I spoke with pre-sales both Dell and after-sales technical support and they confirm that filling all 18 banks decreases speed to 800 mhz, but I get conflicting reports which must be running 12 banks (which is configured as 2 of the 3 banks available in each 6 channels) at 1 066 mhz now which is not. Still, both say that my best option is to return the modules to 4 GB bought recently and also pull the original 12x4Go modules and replace them all by 12x8Go 96GB and should operate at 1333 mhz. It is really more memory I need and almost three times that I have already budgeted and spent on extra 4 GB of purchase sticks.
The other option, you said I could do, as well as that of my question is to mix 6x4Go and 6X8Go, up to 72 GB. I see also that is a configuration of memory available on the Dell Web site during the construction a R710, and he said 1333 mhz as well. Technical support before and after had these things to say, and it makes me a little nervous because this isn't an absolute 'you'll be fine:
prior support guy:
"Everything I read or say confirms that it is perfectly fine to mix the modules in sizes too long as modules within each channel are the same size." I think it can be recommended by most to ensure the consistency of the size but as I said before that we have in our new server system configurations to be cited with mixed sizes what makes me even more confident that is you went this route you would be fine and little or no experience in performance decline. »
support after guy:
"Regarding your new question on the use of 6 DIMM 4 GB mixed with 8 GB for a total of 72 GB, which is not an optimum configuration, but I don't think you should really meet a lot of problems with it." I mentioned before that if you mix speeds, it will downclock fastest at the speed of slow DIMM DIMMS, so certainly would advise against mixing speeds. Regarding the size, the only thing you might encounter as it is booting, you can hear this isn't an optimal configuration, but it should detect any memory and be able to make use of this. Don't think there is really a performance reached unless you're missing speeds. «Also, don't forget to reflect your configuration across all channels, if you do not want all of the 4 GB and 8 GB in the same configuration such that put all 8 GB in slots 1/2/3, then put the 4 GB DIMMs in 4/5/6 on both machines slot A and B.»
So the real question is - if it is not a "optimal" configuration, which makes it means the actual performance of my vSphere servers? All done and they have problems?
Thank you
Ben
How about using 8x8GB sticks for each host? You'd get to 64 GB each... I'd like to see if Dell will allow you to trade in the memory, you do not have to purchase new memory inside the host... Or look for another provider of memory which will provide you with the correct memory at a better price.
Network administrator
VMware VCP4
Review the allocation of points for "useful" or "right" answers.
-
Hello colleagues-Firefox users.
I followed the Commission indicated in the Support article on the slow, crash, etc. by restoring Firefox to its default settings. But the problems go away. The remains of the slow browser and still gives me error messages on a non-compliant script or plugin and crashes. To make matters worse I don't see the menu on the top tool bar items, I was so used to using, such as file, editing, display, etc.. I very often used the display menu to zoom on texts that are too small for me to read. Now I can not do. I tried to drag icons in the menu on the upper right of the page on the top tool bar above the address bar, but it is not the same thing as what I used to use before, and there is no File, Edit, View, tools in the menu icons. So now I see my g-mail Inbox in tiny little characters. I tried to use the Magnifier suggested in the troubleshooting of support page, but it's too heavy so I gave up.
Would someone kindly please help me with these questions? Thank you much in advance.
Kind regards
Tom Graciano (globmart)If the zoom is your problem so just try to use the keyboard.
Hold down the control (Ctrl) key + "+" to zoom in any window.
Otherwise if the crash occurs suddenly so just try to uninstall and reinstall Firefox with the update. You brought a lot of changes manually, it might create problem. So reinstall once and check whether it is at your service. -
MacBook (retina, 12 inch, early 2015) El Capitan 10.11.5 now ongoing enforcement.
Whenever I try to access the camera FaceTime (FaceTime, Photo Booth Apps) the green light next to the camera made a slow blink, and there is no picture.
The system report > camera > model ID: Apple camera VendorID_0x106B ProductID_0x1570
The numbers of the vendor and the product are correct?
The camera worked for 6 months passed and I used FaceTime several times without problem. Several users are affected.
None of the recent changes to the system.
Since the problem began, I have:
(1) installed Skype to see if one application other than an Apple app had a camera problem. Skype has no camera or.
(2) improved 10.10.4 to El Capitan Yosemite. Hoping that the upgrade would reload the application Face Time. No change in symptoms
(3) reinstalled the El Capitan using the OS X Internet recovery. I have not used the time Machine.
(Note for everyone, it was simple and painless and does not need to reinstall applications.) I want to reinstall MS OS was too simple)
(4) several other threads suggested to reset NVRAM and SMC memory, even if they do not seem to be associated with the prob. who - without success here tried either
Any advice to determine whether it is hardware or software? Still dig while you wait for a response.
Note: This problem is not resolved
Also, over How to troubleshoot the iSight - Apple Support . Any assistance to the problem.
-
in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
Downloaded a lot and now can not see how to fix it?The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.
-
10.11.4 slow start and performance.
Update caused 10.11.4 my iMac (27-inch, mid 2011) no start, after checking with an external start HD found no system errors, flawless HD, no failure of memory. Finally managed to boot into recovery and do an Internet re - install.
Now I can't boot how whether it's very very slow, at least 10 Minutes, then well that just doesn't seem seem to work it is horribly slow. I was hoping it was indexing, but that doesn't seem to be the case.
The question seems to be double, very slow startup and very slow performance. The external HD boot was 10.11.3 and seemed to be doing OK, so I have to assume that the question is 10.11.4 as everything else has been validated. All the usual things were made, PRAM, permissions etc.
At this point I have nowhere to go. BTW, took me 15 minutes to get into this brief overview.
I had problems with Bluetooth, you see only not my speaker MegaBoom and Photo Booth says "No. Camera connected... so I has the following guidelines.
Downloaded and installed Mac OS 10.11.4 from scratch
Then I reset the SMP:
Reset the SMC on Mac desktops
Follow these steps for iMac, Mac mini, Mac Pro and Xserve.
- Stop the Mac.
- Unplug the power cord.
- Wait 15 seconds.
- Reconnect the power cord.
- Wait 5 seconds, then press the power button to turn on the Mac.
Reset the SMC a MacBook Air, MacBook Pro retina or the MacBook Pro with an internal non-removable battery
This is how to reset the SMC on most modern Mac laptops, which none have a removable battery:
- Stop your MacBook Air / MacBook Pro
- Plug the power adapter to the Mac
- On the MacBook / Pro keyboard, hold down the command + Option + shift and the power button at the same time
- All the keys and the power button of output at the same time - the little light on the MagSafe adapter can change colors briefly to indicate that the MSC has reset
- Start your Mac as usual
Keep in mind that by resetting the SMC you lose specific power settings, like the time he takes sleep a Mac and other customizations to the power settings. Not much, but if you have made many changes to your behavior of material you want to address things like behavior of sleep again.
Boot time after resetting a SMC machines can be a little longer that usual, it's normal.
Stop and start again, and this fixed everything for me...
Robert MacAwesome88
-
My iMac is slow and I get the beachball all the time. Some of the apps freeze. I can get some work, but it is terribly slow. I deleted web history, etc and then downloaded and ran EtreCheck. Can someone help me interpret the results?
EtreCheck version: 2.9.10 (261)
Report generated 2016-03-20 14:58:22
Download EtreCheck from https://etrecheck.com
Time 03:49
Performance: good
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Beachballing
Description:
Computer is very slow and beachballing. May work, but the slow pace and sometimes requests simply stop responding.
iMac (21.5 inch, mid-2010)
[Data sheet] - [User Guide] - [warranty & Service]
iMac - model: iMac11, 2
1 3.06 GHz Intel Core i3 processor: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
Vacuum
BANK 1/DIMM0
Vacuum
0/DIMM1 BANK
OK 2 GB DDR3 1333 MHz
BANK 1/DIMM1
OK 2 GB DDR3 1333 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
ATI Radeon HD 4670 - VRAM: 256 MB
iMac, 1920 x 1080
OS X El Capitan 10.11.3 (15 d 21) - since the start time: about 2 hours
WDC WD5000AAKS-40V6A0 disk0: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 499,25 (Go 290,40 free) - 346 errors
Drive failure!
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-STDVDRW GA32N)
Hub keyboard Apple, Inc.
Apple, Inc. Apple Keyboard
Card reader Apple
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
HGST G-DRIVE slim GB 7200 500.11
EFI (disk1s1) < not mounted >: 210 MB
G - DRIVE slim (disk1s2) / Volumes/G-DRIVE slim: 499,76 (Go 165,49 free)
Computer, Inc. Apple IR receiver.
Built-in ISight from Apple Inc..
Mac App Store and identified developers
com.Apple.cloudphotosd.plist [failure]
[loaded] 7 tasks Apple
[loading] 154 tasks Apple
[operation] 74 tasks Apple
[loaded] 45 tasks Apple
[loading] 155 tasks Apple
[operation] 88 tasks Apple
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-11-11) [Support]
[loading] com.oracle.java.Java - Updater.plist (2013-04-29) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2015-11-11) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-11-11) [Support]
[loading] com.adobe.fpsaud.plist (2016-03-07) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2013-04-29) [Support]
[loading] com.oracle.java.JavaUpdateHelper.plist (2014-01-25) [Support]
[failure] com.adobe.ARM. [...]. plist (2011-05-04) [Support]
com.apple.AddressBook.ScheduledSync.PHXC... plist [loading]
com.apple.SafariBookmarksSyncer.plist [loading]
GrowlHelperApp application (/ Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
iTunesHelper hidden UNKNOWN (missing value)
AdobeResourceSynchronizer hidden UNKNOWN (missing value)
Dropbox application (/ Applications/Dropbox.app)
HughesNet status Meter hidden UNKNOWN (missing value)
HughesNet status Meter hidden UNKNOWN (missing value)
ConnectService Application (/ Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
StatusMenu Application (/ Incompatible Software/StatusMenu.app)
[ongoing] com.arcsoft.Daemon.8672
[ongoing] JP.co.Canon.cijscannerregister.68192
[loading] 400 tasks Apple
[operation] 187 tasks Apple
JavaAppletPlugin: updated Java 8 45 (07 / 07/2015) check the version of
FlashPlayer - 10.6: 21.0.0.182 - SDK 10.6 (2016-03-15) [Support]
QuickTime Plugin: 7.7.3 (2016-01-13)
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-15) [Support]
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-15) [Support]
Flash Player: 21.0.0.182 - SDK 10.6 (2016-03-15) [Support]
Default browser: 601 - SDK 10.11 (2016-01-13)
Silverlight: 4.0.60129.0 (2011-04-10) [Support]
iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-21)
Flash Player (2016-03-07) [Support]
Growl (2011-11-08) [Support]
Java (07 / 07/2015) [Support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: YES
Volumes to back up:
Macintosh HD: Disc size: 499,25 GB disc used: 208,85 GB
Destinations:
G - DRIVE slim [Local]
Total size: 499,76 GB
Total number of backups: 76
An older backup: 14/05/14, 09:17
Last backup: 20/03/16, 14:38
Backup disk size: too small
499,76 GB backup size < (disc 208,85 GB X 3)
3% launchd
2% WindowServer
kernel_task 2%
1% fontd
0% ConnectService
Top of page process of memory: ⓘ
467 MB kernel_task
389 MB com.apple.WebKit.WebContent (4)
Mdworker (14) 225 MB
Mds_stores 184 MB
Softwareupdated 176 MB
189 MB free RAM
3.81 GB used RAM (1.43 GB being cached)
118 MB used Swap
March 20, 2016, 14:57:11 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-145711_[redacted].cras
com Apple.cloudphotosd - /System/Library/CoreServices/cloudphotosd.app/Contents/MacOS/cloudphotosd
March 20, 2016, 14:53:36 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-145336_[redacted].cras
March 20, 2016, 14:51:38 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-145138_[redacted].cras
March 20, 2016, 14:50:45 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-145045_[redacted].cras
March 20, 2016, 14:49:39 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-144939_[redacted].cras
March 20, 2016, 02:48:14 PM/Library/Logs/DiagnosticReports/TurboTax 2015_2016-03-20-144814_ .hang [deleted]
/ Applications/TurboTax business home 2015.app/Contents/MacOS/TurboTax 2015
March 20, 2016, 14:47:52 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-144752_[redacted].cras
March 20, 2016, 14:45:19 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-144519_[redacted].cras
March 20, 2016, 14:43:40 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-144340_[redacted].cras
March 20, 2016, 14:42:26 PM ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-144226_[redacted].cras
March 20, 2016, 14:41:48 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-144148_[redacted].cras
March 20, 2016, 14:39:45 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-143945_[redacted].cras
March 20, 2016, 14:37:56 PM ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-143756_[redacted].cras
March 20, 2016, 14:36:35 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-143635_[redacted].cras
March 20, 2016, 14:36: ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-143600_[redacted].cras
March 20, 2016, 14:34:03 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-143403_[redacted].cras
March 20, 2016, 14:31:40 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-143140_[redacted].cras
March 20, 2016, 14:31 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-143100_[redacted].cras
March 20, 2016, 14:29:56 PM ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-142956_[redacted].cras
March 20, 2016, 14:28:01 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-142801_[redacted].cras
March 20, 2016, 14:26 ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-142600_[redacted].cras h
March 20, 2016, 12:46 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-124600_[redacted].cras
March 20, 2016, 12:45:02 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-124502_[redacted].cras
March 20, 2016, 12:43:55 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-124355_[redacted].cras
March 20, 2016, 12:41:59 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-124159_[redacted].cras
March 20, 2016, 12:39:38 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-123938_[redacted].cras
March 20, 2016, 12:38:12 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-123812_[redacted].cras
March 20, 2016, 12:36:55 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-123655_[redacted].cras
March 20, 2016, 12:36:11 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-123611_[redacted].cras
March 20, 2016, 12:34:13 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-123413_[redacted].cras
March 20, 2016, 12:31:08 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-123108_[redacted].cras
March 20, 2016, 12:29:59 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-122959_[redacted].cras
March 20, 2016, 12:28:24 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-122824_[redacted].cras
March 20, 2016, 12:27:42 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-122742_[redacted].cras
March 20, 2016, 12:25:38 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-122538_[redacted].cras
March 20, 2016, 12:23:41 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-122341_[redacted].cras
March 20, 2016, 12:22:41 am ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-122241_[redacted].cras
March 20, 2016, 12:21:40 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-122140_[redacted].cras
March 20, 2016, 12:19:56 PM ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-121956_[redacted].cras
March 20, 2016, 12:17:22 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-121722_[redacted].cras
March 20, 2016, 12:16:22 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-20-121622_[redacted].cras
March 20, 2016, 12:10:22 self-test - spent
March 19, 2016, 16:10:23 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.Networking_2016-03-19-161023_ [redacted] .crash
System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.Networking.xpc/Contents/MacOS/com.apple.WebKit.Networking
March 18, 2016, 17:51:35 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-18-175135_[redacted].crash
/System/Library/PrivateFrameworks/CloudKitDaemon.Framework/support/cloudd
March 18, 2016, 17:45:05 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-18-174505_[redacted].crash
March 18, 2016, 17:18:55 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-18-171855_[redacted].crash
March 18, 2016, 16:57:07 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-18-165707_[redacted].crash
March 18, 2016, 12:37:58 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-18-123758_[redacted].crash
March 18, 2016, 12:27:42 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-122742_[redacted].cras
March 18, 2016, 12:25:55 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-122555_[redacted].cras
March 18, 2016, 12:23:46 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-18-122346_[redacted].crash
March 18, 2016, 12:23:45 ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-122345_[redacted].cras a.m.
March 18, 2016, 12:21:42 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-122142_[redacted].cras
March 18, 2016, 12:20:47 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-18-122047_[redacted].crash
March 18, 2016, 12:20:46 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-122046_[redacted].cras
March 18, 2016, 12:17:42 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-121742_[redacted].cras
March 18, 2016, 12:16:02 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-121602_[redacted].cras
March 18, 2016, 12:13:42 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-121342_[redacted].cras
March 18, 2016, 12:11:59 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-121159_[redacted].cras
March 18, 2016, 12:09:35 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-120935_[redacted].cras
March 18, 2016, 12:07:42 ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-120742_[redacted].cras h
March 18, 2016, 12:05:36 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-120536_[redacted].cras
March 18, 2016, 12:03:39 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-120339_[redacted].cras
March 18, 2016, 12:02:46 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-120246_[redacted].cras
March 18, 2016, 12:02:16 ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-120216_[redacted].cras h
March 18, 2016, 12:01:10 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-18-120110_[redacted].crash
March 18, 2016, 12:01:07 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-18-120107_[redacted].cras
March 17, 2016, 22:50:16 ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-17-225016_[redacted].cras h
March 17, 2016, 22:48:26 PM ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-17-224826_[redacted].cras
March 17, 2016, 22:46:57 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-17-224657_[redacted].cras
March 17, 2016, 22:43:46 pm ~/Library/Logs/DiagnosticReports/cloudphotosd_2016-03-17-224346_[redacted].cras
March 17, 2016, 17:55:41 ~/Library/Logs/DiagnosticReports/cloudd_2016-03-17-175541_[redacted].crash
It says right in the report. Your hard drive is dying. You need to replace it immediately. A dead hard drive makes the system VERY slow and gives the beach balls frequent because the disc is a failure and the operating system is waiting to read things. It can be very frustrating.
I see that you have the time Machine; If all goes well, there is a recent backup. I wouldn't crash my most recent backups as you have damaged data on your drive.
Maybe you are looking for
-
How can I stop the page to reload automatically when I hit the back button?
A few months back, I upgraded to a new laptop, and since then, when I hit the back button, it refreshes the previous page from what I can understand. On my last laptop, if I was doing some research on a site and click the previous button, the search
-
Tecra S10 - USB-power does ' t stop the power saving mode
I have the following problem.USB power on the right side three ports USB does´t closed the power saving mode. Only when the system is switcht off power on USB ports is disabled.What can I do?Thanks for a response.
-
Maximum memory, K100, Q6600 - Windows 7 64 bit.
-
Hacked register 'CStateHacks' &#62; hivelist
Key: HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\hivelist\Registry\Users\S-1-5-20\Device\HarddiskVolume1\Users\HomeNetwork\AppData\Local\Microsoft\Windows\UsrClass.dat I'm dealing with sophisticated hackers. Last night, I used Deriks Boot and Nuk
-
BlackBerry Z10 Signal reception ability
Hello I'm planning to upgrade my BB Bold Q or Z. Could someone tell me, with regard to the reception of the signal, which in Q or Z series models are as good or better than the Bold 9700? Thank you