Speed up the image / page load

Similar Questions

• Query automatically considerably slows down the initial Page load

  I use JDeveloper 11.1.1.6 and I have a view object that contains a view of the criteria that I put on request automatically. This criterion of VO/view is then used on my page by default startup as a query with table component. Everything is functional but very slowly. I did some basic performance tests and it took 62 seconds from the moment I saw the blue spinning loading icon until the page appeared with the results on the initial page loading (after the page is initially loaded the query is fast). Then I disabled the feature of query automatically, and I could have the page do the initial load and run the query manually by 16 seconds. A difference! Is there anything I can do to speed up performance while loading the first page when you use the Query option automatically?

  Thanks Shay, I look at the logs with an increased recording and it seems that the query is only get executed once. I found a work around for this problem though. I've disabled the parameter Query automatically on the display criteria in the View object and then for links to the page where I am using this aspect of research and went to the properties of the search criteria under the executables section and changed the InitialQueryOverridden from false to true and now the query runs automatically in the same amount of time to do this manually a so no more time to wait very long at the initial loading of the application.

• Cannot set the home page loading Firefox

  My homepage itself, has recently changed although I did not authorize this change. I want to make msn.com, but now it displays bing.com or Options page Virgin Firefox seen after clicking on the "Reset" button on the page.

  I tried to enter the home of the Options page section msn.com and also drag the msn.com tab to the home button on my browser. MSN load when I click on the button Home, but at the start, one of the other pages loads. Once again, I've done zero replaces myself my homepage settings. I would greatly appreciate all advice.

  Thanks in advance.

  Good news! By placing the cursor on the user.js file and take a screenshot of the location, I was able to find the file using my computer, then delete it. Since then, Firefox * seems * to load my homepage provided on each new startup. Therefore, I should be in good shape with regard to this issue.

  Thanks for all the help. Very much appreciated.

• Cannot connect to Youtube. The first page load, try to register and gets stuck in a loop.

  Pretty much what the title says. I try to load Youtube, and during the initial page load, it automatically attempts to connect. I don't know why, but it can not open my session and gets stuck in a loop. I don't have the patience to see if that solves finally itself, especially when I can sign very well in other browsers. The same thing happens whenever I try to connect to my Google account, as Youtube is related to Google.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.

  Note: This will be temporarily you disconnect from all the sites that you are connected. To clear the cache and cookies to do the following:

  • Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  • Under "Time range to clear", select "all".
  • Now, click the arrow next to details to toggle the active details list.
  • In the list of details, see the Cache and Cookies and uncheck everything.
  • Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

• What is the best way to call a method in the bean on the adf page loading?

  Hello
  
  which is the best way to call a method in managing the beans on the adf page loading.
  
  My version of jdev 11.1.1.5.0
  
  Thank you

  I don't know if it's the right answer for your question try this...

  In taskflow for properties of method call, you must return a value when you use #{pageFlowScope.returnvalue} (returnvalue is a variable), so you can use your return value in the taskflow... Please let me if this is correct...

• How to disable the loading of the image, simply load html script or java e.t.c.

  I want to display HTML to a website in Firefox.
  It should not load image when the disable image is select and reload the page when the option is enabled.
  This option is available on java phones old Nokia I couldn't find in Firefox.

  Try maybe this add on the Image block

• JavaScript function does not work on the JSFF page load but runs on page refresh

  A bit of background first:-I'm a front-end developer who use jDeveloper to build templates/pages. I also manage client scripting using af:clientListerner tags. But my knowledge on the related backend stuff (beans, triggers, actions) etc. is almost zero. So, I'll use technical very simple terms to describe my problem.
  

  
  

  Scenario:

  
  

  Let's say I have two pages JSFF, first.jsff , and second.jsff

  
  

  In first.jsff, I have a command link that navigates to second.jsff. Inside of this page, I have a javascript function that I need to run when the user interface is rendered. But as soon as second.jsff load, my JS function never fires. Only when I refresh the page see running. This what second.jsff looks like:

  <?xml version='1.0' encoding='UTF-8'?>
  <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:af="http://xmlns.oracle.com/adf/faces/rich" xmlns:f="http://java.sun.com/jsf/core">          
     <af:panelGroupLayout id="pgl17" styleClass="mainBox AFStretchWidth">
         <af:resource type="javascript">
              function runOnLoad(){
                    alert("Hello world");
             }
             runOnLoad();
          </af:resource>
          /*   other ADF components go below this line
          .
          .
          .
          */
     </af:panelGroupLayout>
  </jsp:root>
  
  
  

  So I see the alert only when I refresh the page (i.e. after the redirection occurs, I have to refresh the page to make the JS run)

  What I'm missing here?

  jDeveloper version is 11.1.1.9.0

  You will use this fragment of .jsff inside the .jspx page. In the .jspx inside the af: document add clientListener as:

      
        
        .
        .
        .
      
  

  Change the javascript method to be:

   
        function runOnLoad(event)
        {
          alert("Hello world");
         }
   
  

• Width of the image Page

  Hello

  I'm trying to format a picture in Muse where he will begin at some point on the page and extend to the width of the browser. When I select 'extend to the width of the browser', the image includes the entire page, rather than to have it start at a point on the page. How you to format the image concerned only the part of the screen, but still tender to the desired width of browser?

  You can do it in Photoshop. Add to your empty part of the image of the same size, and save it as a png. Then in Muse fill this image inside the rectangle of the width of 100%.

• Speed up the preview of loading external HARD disk?

  I have my catalog and my pictures stored on an external hard drive. I'm reviewing right now a few more old photos, and I find that it takes quite a long time to load the previews.

  For example - I click on a folder that has about 300 images inside. If I go to view grid to the preview screen, it loads the thumbnails for the images that appear on the preview screen, but nothing after that. I scrolled down, and it is the responsibility of these previews. Scroll again, more load.

  Moreover, the same thing happens with the film down. I tried to scroll to the end, but it seems to load only the previews that are currently visible in the preview screen or film.

  Is it possible (short 'intelligent Preview', and I don't know even if that would do the trick) to just say "load all previews at the same time". The initial charge would take more time, but it saves me the trouble of having to wait while scrolling.

  Try putting the catalog file and previews on your internal drive, see if that helps.

  Try render 1:1 previews and keep them indefinitely.

  Forget the intelligent insights, which are unrelated to this problem.

• How can I make my site default to the "Home" page loading in the browser of dreamweaver?

  When loading my site it goes to the 'Contact' page first.  How can I get the browser to display the "Home" page in Dreamweaver 20141?

  Thank you

  Your hosting server will have a list of names by default it uses for the homepage of your site, as one of these names the page exists in the folder root of your remote site, it will be the first thing to happen when someone goes to www.yoursite.com.

  Index.HTML is the most common kind of window files of DW with your change of open defined Site, the name of the page that you use as the home page of your site to index.html as Ben says, also make sure that it is in the folder local root (not in any subdirectory). Change in the files window will allow DW to re - write all the links to this page located on your other pages. Download pages everything has changed and your homepage will appear by default.

• Why, "some files on the server may be missing or incorrect." appears when the Web page loads?

  Little bunny Foo Foo Jill McVarish

  Above is the link to the Web page of the problem. I downloaded via FTP from Muse. I was able to open image & css files of the page in cpanel. I opened the html page in the code editor for cpanel and watched links structured the same as the pages that work. Any ideas anyone has would be greatly appreciated. I use google chome Version 40.0.2214.91 Mr.

  Please refer to this document;

  https://forums.Adobe.com/docs/doc-5561

  Thank you

  Sanjit

• jQuery Mobile - Popup doesn't open after F5, but not on the first page load

  Greetings guys,
  
  Unfortunately, there is very little documentation on how to combine the APEX 4.2 with jquery mobile components, so I hope that some geniuses here can help me.
  
  On a single page with a bunch of hole components, there is also a popup div

  <div id="myPopup" data-role="popup">
     <!-- close button, safe button, input field and short list... -->
  </div>

  He gets open with js:

    $( "#myPopup" ).popup( "open" );

  This all works well, not to mention that the face that it works as after you refresh the page!
  The page loads via js:

      $.mobile.changePage('f?p='+ $v('pFlowId') +':20:' + $v('pInstance') 
                         , { transition:"slide", reloadPage:true });

  ... who also works very well so far. Same problem, I had before when I was using a dialog instead of the pop-up box. -only show after refreshing the page.
  
  This must surely have something to do with how JQM loads and makes the page (outside the APEX-job) - a simple enough question. I also tried different ways of calling the page, without any difference to this problem. Unfortunately I'm quite new to work with JQM, so maybe someone here can help me.
  
  Thank you very much in advance,
  Best regards
  Tobi

  When you think the loading multiple pages is the issue that you can fix that by using the variable apex.gPageContext$ .

  In order to get the popup in the use of the last page / current / real: $("#myPopup",_apex.gPageContext$).popup ("open")

  Documentation says (not more and not less then):
  apex.gPageContext$-used to limit the jQuery to the active desktop or Mobile current page jQuery selectors.

• check if the image is loaded before going to the next loop

  is this a 'valid' method to check if the current image is loaded before going to the next loop/image?

  var mcPics = _root.createEmptyMovieClip ('mcPics', _root.getNextHighestDepth ());
  mcPics._x = Stage.width + 1;
  for (var i = 0; i < pic_arr.length; i ++)
  {
  ["mc" + i] mcPics = mcPics.createEmptyMovieClip ("mc" + i, mcPics.getNextHighestDepth ());
  loadMovie (dir + pic_arr [i], mcPics ['mc' + i]);
  
  While (mcPics ['mc' + i] ._width) continue;
  }

  to do this, you can't even load them in order.  You can just count how many have successfully loaded:

  var mcPics = _root.createEmptyMovieClip('mcPics', _root.getNextHighestDepth());
  mcPics._x = Stage.width+1;
  var mcl:MovieClipLoader = new MovieClipLoader();
  var mclLO:Object = new Object();
  mclLO.onLoadInit = function(target){
       loadNum++;
       if(loadNum==pic_arr.length){
            //start your animation
       }
  }
  mcl.addListener(mclLO);
  var loadNum:Number = 0;
  for (var i = 0; i		   

• Fill data after the Seach Page loading

  Hello
  
  I use Jdeveloper 11.1.1.3, ADF BC. I made a request to search pages. As when loading the page. inputtexts, LOVs, etc. are not displayed, but only the tags are displayed. So when you click to the search button then, text fields appear.
  
  Is there a way in which, once the search page is loaded; That is to say that some data are already filled in the fields.
  
  Thank you
  NL

  Here is what I understand your question [correct me if I'm wrong]:
  You want to create a search with the table page to show the result.
  1. I hope that you have created a VO and added that VO to the module of the Application.
  2. data from control develop AM - VO - named criteria
  3 drag and drop query criteria to the page as a query--> query ADF with Table Panel

  for failing values in the query criteria, you need create a custom query criteria that move to page
  http://naive-amseth.blogspot.com/2010/08/how-to-default-data-on-search-criteria.html

  Amit

• 5th element of the table disappears after the new page load

  Hello
  
  In a page, I set the following...
  
  <! - set up color site map - >
  < cfset session.colors = ArrayNew (1) >
  < cfset session.colors = [1] #get_club.color1 # >
  < cfset session.colors = [2] #get_club.color2 # >
  < cfset session.colors = [3] #get_club.color3 # >
  < cfset session.colors = [4] #get_club.color4 # >
  < cfset session.colors = [5] #get_club.title_color # >
  
  In the page in which these session variables are defined, all are accessible. When I load a new page, items 1 to 4 are available, but the 5th is destroyed.
  
  < cfdump var = "#session #" > show all 5 items in the page that creates the variables, but < cfdump var = "#session #" > on the second page shows only 4 elements in the table.
  
  Why this might be happening?
  
  For example...
  
  Cannot find the element at position 5.
  
  The error occurred in J:\InetPub\wwwroot\Version3\mainframe.cfm: line 79
  
  
  
  Thank you
  Tanya

  Hey Nate,

  OOP! You are right. They have been developed in one of the pages that has been used in the frameset. I don't know how I missed. I am so embarrassed now :-)

  I was looking so strong at what was wrong with the code that I missed that it be implemented elsewhere...