Cannot connect to Youtube. The first page load, try to register and gets stuck in a loop.

Similar Questions

• cannot connect to windows the first time I try to use the password. Enter it in the second time and it gives me access

  I am using windows 7 Home premium 64-bit on an HP desktop with intel 3.4 GHz processor.  About two weeks ago, I noticed that when I tried to connect to windows by entering the user password, the system would have indicated the incorrect password.  Then I must enter exactly the same password again once, he would give me access.  A few days later, I noticed that every time I tried to connect to a Web site that requires a user ID, the cursor would move in through all the ID I used on this site previously.  Can someone help me fix this problem?

  Hello

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• LaserJet CP1025: Printing pink spots on the first page of all documents Word and PDF but not Excel etc.

  This printer has had very little use again, last September. This problem started about 2 weeks ago. It affects Word, PDF files and print from Chrome.

  Excel, Publisher and Notepad all print correctly. It affects only the first page of the documentation. Printing multiple one after another - first page only of each doc is assigned along the right edge together about 1 inch wide.

  My office programs are on my school's network. No other users have the same problem and impression on my inkjet at home is fine. My solution is to add a blank page at the beginning of Word documents.

  It seems that it is only this printer is affected, but I do not understand why some programs are affectd but not others.

  Ideas would be welcome.

  Hi @Fortwilliam,

  I see that you are having problems printing applications, the first page has pink spots on the right side of the page. I want to help you.

  It's certainly an issue that you are experiencing. Since it is not done this with all applications. So I don't think it is a hardware problem, but related software.

  Make sure that you are logged on as an administrator and try to print again.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you're still having problems, I uninstall and reinstall the latest version of the printer software, just to rule out a software conflict or the printer driver is damaged. Full Feature software and driver.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If there is anything else I can help you, let me know. Thank you.

• Cannot connect to YouTube, the page will not load.

  I use version 28.0 and I cleared my cache, cookies and history of the browser. I can watch a video on Youtube, if a direct link and sometimes access to the site itself, but I can't log on my YouTube account. When I click on login, the page tries to load until I finally exit out of it and give up. After this point, I can not access the real YouTube website. I am able to connect to any other site, I've tried, including Facebook and my Gmail. I have no problem with this in my torch/Google Chrome or Opera browsers.

  I added Firefox on my programs that can both through Windows Firewall and have run Malwarebyte scans s, Windows Defender, and SuperAntiSpyware. What can I do to fix this? Y at - it a plugin that I missed resettlement, because I had to uninstall and reinstall Firefox from scratch recently, or is there something else I'm missing?

  The problem seems to have resolved itself somehow. I didn't do something different after trying to solve this problem, far backward at the beginning and running a couple of analysis between the two then and now you can find the usual cookies of my sites which had been cleared when I complained about this problem in the first place. I really hope that it does not start again.

• Run only the first page load time

  All,
  Ive wrote a small plsql code under dynamic action (checked run when loading, but the button is hidden) I want to run only the first time my loading of the page, its correct operation, but I realized that it also runs every time this page is refreshed/submitted. How can I change this approach to run only the first time that this page is in charge and not at any other time refreshed/submitted?... Thanks & greetings

  In your dynamic Action where you specify PL/SQL code, there is an input field for Page elements to submit. View this element hidden there, and it should keep the value.

• jQuery Mobile - Popup doesn't open after F5, but not on the first page load

  Greetings guys,
  
  Unfortunately, there is very little documentation on how to combine the APEX 4.2 with jquery mobile components, so I hope that some geniuses here can help me.
  
  On a single page with a bunch of hole components, there is also a popup div

  <div id="myPopup" data-role="popup">
     <!-- close button, safe button, input field and short list... -->
  </div>

  He gets open with js:

    $( "#myPopup" ).popup( "open" );

  This all works well, not to mention that the face that it works as after you refresh the page!
  The page loads via js:

      $.mobile.changePage('f?p='+ $v('pFlowId') +':20:' + $v('pInstance') 
                         , { transition:"slide", reloadPage:true });

  ... who also works very well so far. Same problem, I had before when I was using a dialog instead of the pop-up box. -only show after refreshing the page.
  
  This must surely have something to do with how JQM loads and makes the page (outside the APEX-job) - a simple enough question. I also tried different ways of calling the page, without any difference to this problem. Unfortunately I'm quite new to work with JQM, so maybe someone here can help me.
  
  Thank you very much in advance,
  Best regards
  Tobi

  When you think the loading multiple pages is the issue that you can fix that by using the variable apex.gPageContext$ .

  In order to get the popup in the use of the last page / current / real: $("#myPopup",_apex.gPageContext$).popup ("open")

  Documentation says (not more and not less then):
  apex.gPageContext$-used to limit the jQuery to the active desktop or Mobile current page jQuery selectors.

• Boxes (with the exception of the first page of comments) YouTube comments are insensitive/gray. Google have not responded to my request, can advise you please?

  Boxes (with the exception of the first page of comments) YouTube comments are insensitive/gray. Google have not responded to my request, can advise you please? Running Ff in "Safe Mode" makes no difference, or reload the page.
  The URL is just one example, the first series of observations, I can meet next & following I can't.

  Thanks for your help,
  Dick Holman
  [email protected]

  p.s. I can sometimes get the comment boxes to work if I allow third party cookies.

• Cannot set the home page loading Firefox

  My homepage itself, has recently changed although I did not authorize this change. I want to make msn.com, but now it displays bing.com or Options page Virgin Firefox seen after clicking on the "Reset" button on the page.

  I tried to enter the home of the Options page section msn.com and also drag the msn.com tab to the home button on my browser. MSN load when I click on the button Home, but at the start, one of the other pages loads. Once again, I've done zero replaces myself my homepage settings. I would greatly appreciate all advice.

  Thanks in advance.

  Good news! By placing the cursor on the user.js file and take a screenshot of the location, I was able to find the file using my computer, then delete it. Since then, Firefox * seems * to load my homepage provided on each new startup. Therefore, I should be in good shape with regard to this issue.

  Thanks for all the help. Very much appreciated.

• Cannot reset af:table paging to the first page

  Hi all

  I use JDevelopper 11.1.1.7.0.

  I enabled paging on my af:table displayed in a jsff. Then I added on my jsff to choose page size after the post of Andrejus (Andrejus Baranovskis Blog: how to control ADF Table Pagination on TIME and Do Case Insensitive search).

  My problem is that whenever I have access to the web page, the page of the selected table from the previous session remembers... I would like to see the table page set to 1 whenever I get to the taskflow containing this jsff.

  I tried this method: Browse by program on the following page: paging enabled on af:table

  but it does not work in my case, because I want to reset the paging before the jsff appears so the richeTableau does not yet exist.

  is there not a way to reset pagination while playing with the iterator binding or the RowSetIterator?

  Thanks a lot for your help!

  Doug

  In my case, the problem was that no matter what page I want to programmatically set, it would be crushed by the value from the MDS...

  Because I don't want the page number to be persisted, I simply added the following on my af:table attribute

  dontPersist = «first»

• How to run the code (invisible) after connecting and before the first page of the user.

  Our site has a standard login page that I can't change. But I want to run code 1) after logging in the application (not APEX!) and 2) before the first page of the user of the application. How could I (can I?) put it on a page that runs invisible and then transfers it to the first page of the user application? Also, it would be great for testing I could reiniitalize easily between test scenarios without having to log in again.
  
  Thanks - Howard

  You could put it on page 0 and condition the process so that it works only on the login page.

• the "next screen" buttons are invisible, making it impossible to navigate beyond the first page of what either. Help please!

  One no matter what website I connect to, if I need to navigate to another page after the first there is usually some sort of bo or the button at the bottom of the page to click to go to the next screen. The button/box has disappeared from all the websites I visit, so I can't really do a lot online. Help.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? The report please come back shortly.

  At this site never displayed properly on this computer using Firefox?

• The action of the button Back/will not return to the first page open on a tab

  From a few weeks ago (I believe that when 3.6.16 is released), I lost the ability to return to the first Web site loaded on any tab by using the previous button or right click-> menu back.

  I upgraded to Firefox 4 and I still see the same question.

  This happens if the new tab is created from a link on another tab of an item in my toolbar bookmarks, or if I have on a button open new tab, then the initial Web page in the address bar or in my bookmarks toolbar.

  When I navigate to the second site in this tab via a link, manual entry or a bookmark, the previous button is active.

  If I navigate to other pages and a right click on the back button, the first page I have loaded is not listed in the history.

  It is possible to my modules or something is causing this issue? I can't think of any possible configuration setting that would entail.

  If not, should I submit a report in Bugzilla? I couldn't find a corresponding bug report, but it seems that it would have been stated several times if someone else saw this question.

  Edited to stop scrolling - Maurane

  With the back button does not, problems are caused by the McAfee Site Advisor, if you uninstall or disable this extension, the back button should work again.

• Printing moved on the first page printed with C309G

  I bought a HP all in one Photosmart Premium (C309G) today, it seemed a valid upgrade to my aging Photosmart 2410 for print and copy every day.

  However...

  It's something that I have not been able to resolve or explain so far. The first page that is printed is moved from 10mm to the bottom of the page, all others print in the correct position. This is also true of photocopies, if I do a duplicate from the front, the first page is moved to the bottom while the second page is in the correct position (only one face is also moved).

  HP had me install the generic of 550 c driver, and does the same thing, except that it prints the first to the last, the first page of the document is assigned, while the pilot C309G print name, so the problem presents at the last page with that. In fact, which is very useful because it is a simple matter of most of the software to add an additional page, in white (although wasteful).

  My Laserjet 1022N, nor the C309G reported paper size available in the properties of the printer (Win XP), but both shows correctly in the driver settings. The Laserjet printer does not display the move, however. The pilot made 550 c display available as A4 paper size, but moving.

  I'm stumped at this point. HP tried to blame the software I print since then, but this is partly because they have not read what I said correctly, IE I explained I could fix by adding a blank page in Word, WordPerfect, Corel Draw etc-, but that I couldn't do when printing from Firefox or Outlook, that display the same questions.

  My feeling is that the printer is not been properly initialized for the first page, perhaps to be told that the page size is to the letter instead of A4, but it's just a deep feeling. There is no setting that I can find on the printer itself to set the size of paper, other than from the region, which is set correctly to Europe. With the scanning, I offer myself as a paper size A4, no letter, so he seems to indicate that the printer is configured properly.

  Use the 6 x 4 built-in photo paper tray, the images are correctly, so another thought I have is the rolls of paper collection is a malfunction in some way.

  The device is normally connected via ethernet (cable), but I also tried USB without any difference. I uninstalled an reinstalled the drivers (I use just the base driver package).

  Any thoughts greatly appreciated that it has left me speechless.

  Thank you.

  Rik

  Kudos to HP support, after 48 hours of trying everything they could think, they proposed a power cycle, and cured the issue. I was able to identify the cause of too, whenever I have install the drivers on another machine on the network, moving is recurring. So, now I just power cycle after each installation.

• Windows fax and scan only saves the first page

  When I use the windows fax and scan pages to analyze. You can get an overview of all the multiple pages scanned, but what emailing or save you then cannot see the first page.

  Hello

  If you're using a scanner with a charger of documents and Windows Fax and Scan, you can scan multiple pages into a single file of scanning to the TIFF (.tif) file format. For more information, see:

  
  Scan a document or photo with Windows Fax and Scan
  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan 

  If you use Windows Fax and Scan and a flat bed scanner, you can scan multiple images to separate files probably. Not all scanners flat have this ability, so you may need to contact the manufacturer of the scanner to get a driver so that your scanner flat may offer this option.

  Reference:

  Scanning: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questions 

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Speed up the image / page load

  I did a remake of the site for my business.  I'm an amateur web person - not my part-time work full-time here.  My boss wanted a lot of images.  -Now that we have them, he said that the page takes too long to load.  For directions on how to get the images / page load faster?  The model I according to the site has a front loader of ajax, but apparently not actually preload all images.  The galleries still take some time to load when you see them.  The site is up to http://www.morgansmithllc.com.  Any suggestions on how to accelerate things that a fan of DW user can implement?  Thank you!

  It's one of the downfalls of a unique layout. In this type of layout, everything must be loaded because everything exists on the same page.

  So, I tried running your page through some analyzers and found there are a few very large files that are used.  The backgrounds are enormous and could probably be more compressed.  Right now, your first 6 images are 10 MB of 20 + MB size of the page which is too much.  Also, I see a lot of Parallax javascript drag.  Just because a Web site is a single page does not mean that it must be a site of parallax.  In fact, for this type of site, I would recommend removing the Parallax because there is no need for this.

  If you simplify the site in this way, which should help a good deal with loading and scrolling speed.