specify the format of the cross-reference in read/write rules?

Similar Questions

• I want to add tab stops to the cross-reference format to make my OCD, a solution of a single click, but the format never comes out right and using the tab key in the window of the dialog box to move the cursor to the next window.

  When you try to format my references I would add tab stops so that the format for the TOC works with the cross reference.  For example my format on the pages of reference is

  < $chapnum > - < $paranumonly > < $paratext > < $chapnum > - < $pagenum >

  With tab stops before the chapnum, between paranumonly and paratext and the next chapnum.  If the final result should look like

  4-16 speed vertical digital - primary Mode... 4-28

  Help?

  In the reference page, add a \t where you want a tab to be, i.e. \t<$chapnum>-<$paranumonly><$paratext>\t \t<$chapnum>-<$pagenum>

  Then, make sure that the format of paratag has the tabs tab placed at the correct locations.

  When you re - generate the table of contents, you should get the desired effect.

• "BOLD" in the character tag does not work in the cross-reference text

  Hello

  I use cross references to introduce pieces of text that are repeated in two chapters. The referenced text includes characters of the text that is defined in a character tag. The chapter where I insert a reference to the text has the same exact character tag in his catalogue of character (I imported the character formats to be sure). But bold disappears in the cross-reference text. Any ideas on how to do bold appear?

  Thank you

  Tami

  Character formats or text attributes caused by Variables seem to be kept on the xref.

  What might work, however, is to put the text in a file external FM and bring it as a Medallion.

• The control law of read/write FPGA on the loop of the root / the UI thread?

  Hi all

  As the title suggests, the read/write control FPGA, https://zone.ni.com/reference/en-XX/help/371599H-01/lvfpgahost/readwrite_control/, is on the loop of the root / the UI thread?

  Watch, https://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/multitasking_in_labview/, this would indicate as that, but I would get a good response.

  Kind regards

  David

  While I'm not 100% if it acts on the loop of the root / UI thread - calls to the FPGA (e.g. control of read/write operations FIFO) block permanently. I remember having a weird problem in the past where my FPGA operations have been suspended because I was expecting given FIFO elsewhere.

  You should be able to test this easily enough - try to open a file dialog during playback of your FPGA. If playback crashes while the dialog is open, you have a loop of root problem.

• Help? the source volume is read-write and can not be disassembled...

  I use 10.11.5 on an iMac 21.5 ", end of 2009 and I want to restore the OS X 10.11.5 to HD on an external drive but I get this message" Source volume is read = write and cannot be disassembled, so it cannot be copied from block. "  I can find answers do not address El Capitan.  Help would be greatly appreciated.

  .. .Goldie

  You use disk utility's restore feature?

  If the HD has a recovery partition, you can make starting in place of the recovery.

  Or you can use SuperDuper! (the basic version is free and can copy the entire disk, the paid version allows "smart updates", which copies only files that are different, saving time) running on externally to perform the copy.

• You can lock anchor text characters or the cross-reference.

  Hello

  I'm trying to set up a document that several people can edit and referrals has been a great tool for some things. However, I fear that many references will be broken as these other people edit the text.

  My Question: is it possible to lock the hidden like these characters so that they don't get accidentally deleted? I would like to know if this can be done for text anchors too!

  If this is not possible, please let me know!

  As far as I know, the answer would be no. If the text is editable, anchors or markers contained in the text are able to remove.

• The cross-platform browser compatibility CSS rule help

  I am an advanced beginner Web Designer.
  
  The site that I need help is www.sprungtheatre.com
  
  I designed this site on a PC computer. Each page has a different Background Image CSS rule. The only rule I put is the image and the 'no - repeat'. I did put the terms of its offering.
  
  Each of these images had an effect feather applied in Illustrator so that the image would have melted in the background black. This works fine on Windows machines in IE and Firefox.
  
  However, on Macs, the left side of the image is cut off. Who wants to say, it seems if the feathered edge was cut and the picture ends abruptly.
  
  Is there a way to fix this?
  
  I just think that is this my occur:
  
  The rule of CSS Background Image is applied to a nested table that is editable in a model. I think the Mac browswers to move the image to the top-left of the table of "Grandpa" in the set, in which the editable region is nested, cut this part of the image that appears in the region uneditable 'Grandpa' table and showing the part of it that appears in the editable nested table. I hope that makes sense. Application of investment rules would it? Otherwise, what could?
  
  Thank you very much
  
  Jon
  
  

  My bad: I was looking at my old CSS file. All that now! Thank you!

  Zaphron

• How to set the width of the column read/write rules?

  Hello specialists of the structure.

  I read a set of DITA files in a specific format to the FM model, and there is a detail that I can't work properly. It should be possible to set the width of the columns in a table, even if the DITA file does not include this information. But the developer Application Structure reference does not give information about what string to pass to the property of fm of column widths. Anyone out there experience in doing this?

  Thank you

  Jang

  I have it!

  Turned out to be simple, but the info was more or less hidden in the Dev Guide of Ref: I already had the line "property column widths fm is the value" but did not know the syntax for values. Turns out you need to delimit the values with spaces, not commas. The parser does not give ANY useful information, simply mentions "somewhere near syntax error" or completely ignores the values that you specify.

  This is how the rule for my properties DITA element works now:

  {'Properties' element

  is fm of table element;

  columns FM property value is "3".

  column and the width of the FM property value is "5cm 5cm 6 cm;

  }

  This works. I earn 10 points to answer my own question. :-)

  Ciao

  Jang

• has triggered the numerical sequence of read/write

  Hello

  I'm pretty sure it's impossible to do in Labview, but thought I would ask the question just in case:

  On a digital falling edge I need to define a digital line on a highest PCI-6224 and a low, then read sixteen lines as a port.  Output high and low lines should change status then and sixteen lines should be read again.

  The process is repeated on the edges of successive falls.  The time between edges may be as short as 11 microseconds (90kHz).

  We have currently a program written in C++ to do this job, but I want to create something a little more friendly and have virtually no C++ experience myself.

  Thank you.

  Hi Simon,.

  I have an idea how to do that using the DAQmx card.  This has not been tested, but I think it should work with just a few tricks with DAQmx.  There are three tasks that will be required:

  Meter output
  ==============

  This should be a task redeclenchables meter.  Take a look at the example in the example finder LabVIEW under Hardware Input/Ouput > DAQmx > generating digital pulses > Gen dig Pulse Train-finishes-redeclenchables.

  1. This should generate two pulse whenever the external trigger is received so your 11us impulses are the trigger for this task.
  2. these impulses are then for each reading of digital lines:

  Rising edge - changed lines to enable
  Falling edge - read data.

  By making these large enough pulse (> 140ns) that will take care of the running lines.

  3. the gap between pulses must be long enough for any delay required between the readings.

  Digital output
  ==============

  It must be a regenerative continuous power - see example material entry and exit > DAQmx > digital generation > Cont writing Dig Ext Clock.vi - Port.

  1. the clock source should be set by right-clicking on the source control.  Select i/o filtering name and then check the box advanced terminals.  You can then select him appropriates the in-house production of counters.

  2. you need to set the clock for the front edge.

  3. the entrepreneurs that the buffer with two outputs that we require for example 10 and 01 and then sending a pulse to the clock pass effectively between the two.

  Digital input
  =============

  This should be a task of standard continuous input as in the example of the input and output material > DAQmx > digital measures > Cont read Dig channel-Ext Clk.vi

  1. set up the VI of timing almost identical to the output task.  Same source, but this time on the front clock down.

  2 do with the data you want!

  Overall program
  ===============

  The main consideration is that you should start the meter output last as soon as it runs other can start synchronization of data.

  I hope this helps and is clear enough.  I would like to know if it makes sense or if you would like more information or even no matter what assistance this program construction.

  Kind regards

• Repeat the Scans with DAQmx read/write

  Hello:

  I use DAQmx vi to generate signals on channels ao0/1 a reading of the signals of the channels ai0/1 a card NI USB DAQ of 6251. I do this by using the read and write of vi and a trigger vi. This vi will run successfully for a single analysis. Now, I need to be able to perform multiple scans with the same settings but separated by 5 seconds or more. When I click on Scan, the vi analysis. However, when I click scan again once it does nothing and I don't know how to scan again.

  The vi VU RAMP MOD (not included) is simply used to generate the shape of the signal.

  Thank you!

  
  

• Why my Panel references altho don't use explicit names for each cross-reference in the list?

  Creating a catalog.

  I've defined two 'the hyperlink destination' and using them as "cross references" in my table of contents.

  I'll add many of the cross-references more soon, but I need the Panel cross-references to the list of people with meaningful names, so I can find and edit easily.

  Otherwise, I might be better off just update numbers manually when the catalog is updated (yuck).

  Is there a way to Cross reference panel to use meaningful names without using the name in the visible text on the page?

  Here's what I mean:

  

  Just a sign dang sharp, since the format of my cross references simply entered a page number on the page.

  How can I know who is who? I don't. I need more information in the Panel references Cross.

  If I add some text to the definition of the format of the cross-reference, it is visible on the page, BUT it also added cross-references to the Panel.

  

  Close, but no cigar.

  I can't leave anything other that the corresponding page number appears on the page.

  Any ideas?

  I decided to believe there is no solution to the Panel Cross references give me a more explanatory list.

  At least I can highlight the text Variable in the doc and the Destination of the respective hyperlink is highlighted in the cross-reference panel. This will have to do.

  

• Cross-references and pulling exactly the text you need

  Hello, my question today concerns the references.

  My problem with the referral system is that, in its present form, it can be quite rigid. Essentially, I need only a small amount to be drawn from the cross reference which is nt specific anywhere in the paragraph of the text.

  My first idea was to develop a format that would be part of a paragraph ONLY text that has a style CrossRefNo character called (in my case), which is just a character style empty developed purely for this purpose. However when you use the

  < name cs = "" > < / CS > definition its plain enough that it is not infact extract text which is a certain CStyle but rather the text found in a certain formatting style (which seems a little redundant next to the button below which gives you the ability to apply a character style to the reference). So if you only use this format unless you type something in the field, it will produce no real text.

  I'm looking for is essentially the objects they used to build the formatting code cross references.  If they have already available from 10 items or if it is extremely restrictive.  Is there a type of < foundText = theTextWithinThisParaThatIsFormatedWithThisCharacterStyle = "CrossRefNo" > < / found text >

  Thank you! and please let me know if it belongs to another jurisdiction.

  chughes133 wrote:

  Hello, my question today concerns the references.

  My problem with the referral system is that, in its present form, it can be quite rigid. Essentially, I need only a small amount to be drawn from the cross reference which is nt specific anywhere in the paragraph of the text.

  My first idea was to develop a format that would be part of a paragraph ONLY text that has a style CrossRefNo character called (in my case), which is just a character style empty developed purely for this purpose. However when you use the

  definition of its plain enough that it is not infact extract text which is a certain CStyle but rather the text found in a certain formatting style (which seems a little redundant next to the button below which gives you the ability to apply a character style to the reference). So if you only use this format unless you type something in the field, it will produce no real text.

  I'm looking for is essentially the objects they used to build the formatting code cross references.  If they have already available from 10 items or if it is extremely restrictive.  Is there a type of

  Thank you! and please let me know if it belongs to another jurisdiction.

  You are right that InDesign CS4 references this is impossible. However, dtptools.com plugin commercial references can to extract only the text that is tagged with a character of a paragraph of the source style.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Cross reference marker text differs from the text on the page

  The text for a cross-reference marker is different from the written text of the page. For example, I have a numbered heading written as "3.1 Cats and Dogs", but the text of cross-reference to this position marker is "55227: title 1: 2.1 pigs and horses." The cross reference looks and works great on the page, but I can't understand why the text of the marker is different, and why it cannot be updated to match the text on the page.

  I use Windows XP and FM9. Thanks in advance.

  Ron,

  The target of a cross-reference marker must have a unique string that differentiates it from any other marker of cross-reference in the file... it is how Frame numbers how when it comes so it can maintain the link and make updates. As you have probably guessed, this string is a concatenation of way random (I think) integer to format BMP target and target the text of TFP at the time of the creation of the xref. With all these settings, it is easy to achieve the goal of a single string.

  It seems appropriate to have this text update during an update of the xref, if something changes in the target. However, this would create two problems:

  -All xrefs that are not being updated at the time wherever the marker is published would be broken. For example, suppose you have xrefs folder has a target and make updates, which modifies the marker of target due to changes to the target. Any xrefs in file B (or any file for that matter) would become broken, because they are still configured to search for the previous string of marker.

  -An update of the xref always you would have to save the changes to the target file, which is an inconvenience at best. For example, if you have made an update of the book and xref target markers have been changed, you'd have to make sure that the files associated with the changes were saved later, otherwise your xrefs update would be broken later.

  So, in summary, the text of the marker is just a unique identifier that is defined during the creation of the xref and necessarily must stay the same for its useful life, unless you want to go around fixing broken xref all the time. Moral of the story... do not put swearing or slandering of boss in your topics like temporary jokes if you never create xrefs their

  Russ

• Cross-references in the output PDF from Framemaker: how to center the Pages?

  I think I understand quite well the functioning of cross-references in Framemaker, but one thing that bothers me, it's how, when you generate a PDF from Framemaker file and clicking on a reference, the resulting page view locates the cross at the top of a page reference marker.

  It's very annoying and confusing when, say, referring to a figure of legend that appears at the bottom of a page. Page display that results when such a reference in a PDF document after Center the text of the _following_ page, with the text of the legend of the barely visible figure at the top of the page.

  My question: is it possible to build cross references that show the page, when you click in a PDF document, is centered on the page that displays the cross-reference material?

  Thank you very much.

  JMW

  Not AFAIK in FrameMaker.

  But in Acrobat, set the initial view one Page instead of continuous.

  File > properties > Initial View.

  

  Two upward (direction) and two up (cover Page) would also work.

• Eratic behavior: book, the main text blocks and Cross References

  I'm on InDesign 2014.2. Mac.

  I'm working on a fairly large book. About 14 chapters / sections, about 400 total pages. There are also hundreds of cross references, almost all of them to anchor references.

  The design of the book is as simple as possible. There is no graphics, text blocks only.

  I use a single master page, with facing pages, and a block of text type. I used it throughout the production of the book, and the primary text flow worked well, chapter after chapter. Pages have been created automatically, and automatically flowed text.

  Maybe I need to change the page size of the book, and I also have a lot of editing to do which will reduce a lot of the chapters. I wanted to make sure all pages use the main text flow to do that, go as gently as possible.

  To my dismay, I discovered that although I used systematically throughout the book master text streams, all but three of my chapters have inexplicably lost their text stream. All images in these chapters have converted into ordinary images. That I edit the book, it's playing havoc with paging and referrals.

  I tried to restore the flow of text in one of the first chapters. It's easy to do, in theory.

  • Move the first page off to the side frame
  • Delete all pages except the first page
  • Command-shift-click on the first page to restore the flow of the main text
  • Copy and paste the contents of the old frame into the primary stream restored.

  
  

  When I do, the pages to move properly, and I'm back to having a chapter with a block of primary text on each page. Unfortunately, this breaks all cross-references that refer to this newly reorganized chapter and all references to the front in this chapter.

  
  

  I tried to do all that I could imagine. Only remove the frames and not pages. Try without the busy book. Nothing works. I tried the command update cross-references in the book menu. Has nothing.

  
  

  It seems impossible to redistribute the text in a new primary master framework, without completely breaking the cross references.

  I finally found something that seems to work:

  • Create a new master page at the end of the document.
  • Go to the last page of the history of the chapter and the last history image a link to the text block type on the page that you just created.
  • In the pages palette, delete all pages in the document, with the exception of the master page that you created.

  All text will be redistributed within the frameworks of masters, and cross-references (to and from the frame) seem to be intact.