split a table 2D to 1 d by row tables

Similar Questions

• Splitting the tables in the tables more

  Hello world

  I couldn't find a similar problem on the forum, hency my new post. I have a number of paintings in need of splitting.

  Say I have data stored in 4 tables (or columns), appointed IGS, VGS, VDS and IDS. These four columns each have n * 80 cells, where n is the number of measures. What I want to do is to have the n number of times IGS, CGS, IDS and VDS, where each table is only 80 cells long. Thus, when displayed in Excel for example, the first row would look like:

  IGS VGS IDS VDS VGS ID VDS IGS VGS GHI...

  Thanks a lot for help.

  You can start by finding the size of you individual tables, IGS, CGS, IDS and VDS.  I guess they would be of the same size.  Divide size by 80 and that's your hand for loop index.  Use the subset of table VI and shoot 80 pieces of each array element.  Once you have the 80 item chucks you can set up another loop on the berries and build the table 1 d longer with an Array function construction with a CONCATENATE entry-level feature.  Using shift registers and another function of matrix to build to add the following line in the main table.

  I think that's what you wanted.

• Splitting of table pages

  Hello
  I have a table where I want to keep master data and detail together, but it is split when I page break, so I page 1 key data and details on page 2. I tried unchecking the "allow splitting of lines on several pages" for each line. I also tried creating a 1 row, table 1 column and paste my original table contained in it. My thought was that I box unchecked the "allow to break" in the main table, the nested would not break.
  
  Anyone have any suggestions on how to stop my table to break more pages?
  
  Thanks in advance
  -CC

  Hi CC

  Its looks like you tried what I w3as going to suggest IE create a singel celled table to hold the paintings of master and detail. Define her do not break through to the layout on the cell and master/detail tables.

  However, if master/detail tables are too large to fit on a single page, the rendering engine will be forced to break anything.

  The only way around it would be to shrink the police.

  Tim

• split the table 1 d of string with spaces in solitary segments

  Hello ppl,

  I wanted to post it because it took me a while to do this thing. I have table with spaces and I do the 2D array. For example:

  ? NM 100.0 ok->

  ? NM

  100.0

  Ok

  Take a peek inside. Maybe someone will find it useful.

  
  

• Splitting the tables in Dreamweaver 8

  I just finished building a web page using a giant table. Some of the problems I have with the line-column interactions would resolve if I could drill three vertical to the table, but every time I have paste a copy of the table in the code to remove the lines, I don't want to, DW8 keeps adding right, not below the first table that I brought in 5 rows with a different table name. How to cut the table so that each set of lines appear vertically and not appear horizontally separate?
  
  Any advice would be appreciated.
  
  

  Sorry for the not not getting back to you earlier. After reading your message once or twice, she soaked in my brain that I had to remove all--> align = "left".<-- in="" the="" table="" tag="" line="" to="" get="" the="" tables="" to="" fall="" into="" line="">

  Thanks for the very quick tips. Unless you use this software a lot, there will always be these stupid crash.

• split the table 1 d in elements

  At each iteration of a loop, I would like to take root-mean-squre of last 16520 elements of a 1 d array (the last 10 seconds of sampled data).

  But I get the following error:

  I also used "double" converter, but I'm getting the 2nd error massage:

  

  

  U go.

  

• Table split

  I have a table with columns like below
  
  doctor_id, month, value1, value2, value3, value4, value 30, update1, UPDATE2, UPDATE2 update3... update10
  
  This table will be a lot of discs every month that we store only data of two months... and yet it's huge...
  
  Value1 to value30 columns continue to change every month. These columns several physician factors associated with its practice...
  
  each month we have to compare the values of each previous month doctor and generate a report and also update the columns to update10 update1...
  
  Basically the insertions and lots of updates arrive on the table every day and as well as monthly...
  
  The question is "it will be good to split the table into two tables to share the load and improve performance?

  If you have two tables, you will have twice as many clues to maintain.

  You have (at least expected to have) reciprocal foreign key constraints.

  This means that you have trouble deleting records, so you will need to use constraints delayed, that could affect the code since some errors that normally occur at the time of the declaration will happen now at the time of validation.

  Selects will take twice as long because you have access to two tables (usually through two indexes).

  Selects will require twice as much memory because twice as many blocks will have to be loaded in the SGA. This can lead to more physical IO, so slow down everything.

  All this for (possibly a little) which reduces somewhat CANCEL it?

  If you have tested this background, you would see how bad an idea it is from the point of view performance, in addition to all your code more difficult to write and maintain.

  This idea would cost over partitioning.

• [CS 5.5] [JS] Table script Split

  Hello

  Based on a method of line selection that I found on this forum, I created a basic split script table. Everything works fine. The script will create a new table above the old table and move all the content over the cell the curcor where, in the new table.

  Now, I would like to change the script to create a new table below the current table and move all content below the current position to the new table. The problem is the insertion point. How to create a new table after the current?

  Thanks for any comments.

  If (app.documents.length > 0) {}

  var myOldTable = app.selection [0].parent.parent;

  var myOldTablePosition = myOldTable.storyOffset; PointInsertion

  var myTextFrame = app.selection [0].parent.parent.parent;

  MyCell var = app.selection [0] .parent;

  var currentRowIndex = myCell.rows [0] .index;

  var totalNumOfColumns = myCell.rows [0].columns.length;

  var totalNumOfRows = myOldTable.rows.length;

  myNewTable = myOldTablePosition.tables.add ({columnCount:totalNumOfColumns, bodyRowCount:currentRowIndex});})

  selectRows (myOldTable, 1, currentRowIndex);

  App.Cut ();

  selectRows (myNewTable, 1, 1);

  App.Paste ();

  } else {}

  Alert ("Indesign file must be opened!");

  }

  function selectRows (Àtable, startRowIndex, endRowIndex) {}

  App.Selection = NothingEnum.NOTHING;

  var _row = aTable.rows;

  App.Select (_row [StartRowIndex-1]);

  for (var i = startRowIndex; i < endRowIndex; i ++) {}

  App.Select (_row [i], SelectionOptions.ADD_TO);

  }

  }

  ...

  The problem is the insertion point. How to create a new table after the current?
  ...

  var myNewTablePosition = myTextFrame.insertionPoints.nextItem (myOldTablePosition);

  It is the first PointInsertion after Ancienne_table.

  You must also replace:

  -Add a new table using myNewTablePosition;

  -call function selectRows (Àtable, startRowIndex, endRowIndex) use currentRowIndex to start... and -1 for endRowIndex.

  Rgds

• Quickly convert a length (m * n) table 1 d an m by n matrix 2D

  Hi all

  I'm looking for a way to speed up a particular step in a VI that I use. I have a table 1 d of length m * n I want to convert to a table 2d of dimensions m and n. currently I feed the table 1 d in a loop and use split 1 table d to cut the table 1 d in a piece of m in length and another piece with the rest, then each of these m-length pieces forms so a new row in another table. I do not know is not clear, so I attached the VI section that does this. The VI works fine, it's just slower I want. I'll regularly get a 1 d table which is 1024 * 8000 long and this code is certainly the step rate limiting. Is there something I can do to make it run faster?

  Thanks for taking a peek!

  For the context (although I doubt that this important to answer my question) m is called "Width of the sensor" and n "Num of shots." I'll send a play command in an array of photodiodes 1024 who report their recent measures "Number of shots". This output is like a painting 1-d, which is pixel1shot1, pixel2shot1, pixel3shot1... pixel1024shot1, pixel1shot2... etc and I would be like a 2d array that is pixel by shooting.

  There is a matrix function of reshaping on the table palette.

• Decimate table 1 d

  Say I have a table of 500 items and want to perform analysis on every 10 items, such as performing an analysis of the elements 0-9, then 10-19, 20-29 etc etc then what would be the best way to do this.

  I thought to split the table in a number of the subarray, but table 1 d decimate function does not maintain the order of the elements in the original array. There is another function that can be used to achieve this?

  I understand that I might use a loop of some sort to navigate the table and perform analysis every 10 items, but the table can be big enough and I want to do it as efficiently as possible.

  Any ideas?

  Stroke

  Amd1480 wrote:

  Check this

  I have the feeling that the constant resizing of the table within the shift register could cause more memory allocation you would like.

  I would recommend a simple "reshape array' or"subset of table", as it has already been suggested. Here are the two alternatives.

  If the array of size not divisible by the size of subeset, this example will ignore the incomplete tail. (It would be a negligible change in order to treat it instead).

  

• signal split several times on target RT

  Hello

  I have a signal composed of 50,000 items on my RT cRIO and I want to split the signal into 97 signals of 512 items each. Is there a way to apply this using blocks of Labview? So far, I've implemented using a MathScript and a loop, but the program is very slow work because of this.

  THX,

  Valentina

  Here is an excerpt with two ways to do this - assuming you want to use on your 97 subdashboards one after the other and not them erupt in 97 different threads on the same scheme, which would be cumbersome to say the least!

  The first uses Split 1 table D a while loop with a shift register and an empty array? in the range of comparison to determine when leaving the loop. The other uses the table to reshape and a loop For with automatic indexing enabled - I am no expert on this but I think that the compiler may be able to paralellise that better, if performance is a problem.

  Note that if your input array is not an exact multiple of 512 points then the first solution will give you a short range at the end while the other is will ignore the last<512 points="" -="" you'll="" need="" to="" modify="" whichever="" one="" you="" use="" if="" that="" isn't="" what="" you="">

  

• Splitting of the 2D paintings and the remending

  Hello world

  I use my DAQ system to collect data from several different instruments.  I can't sort the data and have it collect properly.  I have two sensors of pressure with a flow meter that gives the flow rate in l/min and temperature in degrees C.  All information is collected in a table 2D and time values.  I was able to split a table 1 d 2D table and I then indexed table 1 d so I could do the arithmetic for each instrument.  I have a problem recombing data with each and based on time in order to plot the data and save it to a spreadsheet.  Is there an easier way, I do not know, or did I miss something trival?  I joined my current program.

  Here's one possibility:

  

• Boolean signed integer table

  Hi all

  I have trouble with the following:

  I read an array of Boolean 64-bit of a device. This table of Boolean represents a collection of variable of numbers, either signed or unsigned.

  I have the composition of the picture, which is bit 1-15 is a signed 16-bit integer, bits 16-23 is an unsigned 8-bit integer and so on...

  So I can split the table of Boolean in the tables of corresponding bits to convert them to numbers. For unsigned numbers which I simply use "boolean array to the number" and that works very well (the exit is a U32).

  Now, here's the problem: it does not work for the... signed integers the output of the "boolean array to the number" is always a U32, even if I select "sign extend mode" = always in the context of the function menu, so a negative value can never be retrieved.

  Any suggestions on how to fix this? I tried to cast, but I can't make it work.

  Kind regards

  PJ

  Hi Pianne,

  with the right button of the BoolArrayToNum function and set the correct output data type in the properties!

  

• How to connect table 1 d boolean selector case?

  Hello

  I use two types of sensor to a controller. It is the first part. When I tried to get my sensor with labview real-time, I found some unwanted data. for example, after each set of data of 5/10, suddenly I had (o.oo o.oo) data type. interesting is that, usually two sensor does not give this (0.00, 0.00) type the data set at the same time. (please see the attached police Panel and a table named (x + y), first 1 sensor 2column 3column next and another sensor... If u look at rank 7, and 12, you can see the 2sensors data set is 0) I wanted to remove this type of data for a real-time operation. That's why I tried to do a program that would filter the data. . I used the comparator wheter to check all data is 0 or not. If they were all 0 she was supposed to be real exploitation of the structure of the case and he would finally b no output. but unfortunately it did not work. the block diagram is attached. I am very new in labview. can anyone please help me and let me know what I did?

  Thanks in advance-

  Taslim

  Here's a possible solution. To be more precise, you could split the table 1 d inside the loop and check the two sub-tables (size 2 and size 3) independently.

  

• How to generate a sine wave of table of values?

  I have an array of points (values) around 1000. I want to draw them in different types of waveforms - triangle, sine, cosine, etc..

  How ca I do that? For the waveform of triangle, I was able to split my table into 2 halves equal and draw the first half and the separately half second to generate a waveform of the triangle. But how to sine, cosine, Sawtooth etc.? It is a matter of urgency. Prompt response will be appreciated. Thank you

  Hello

  The VI in math palette is a polymorphic, it accepts the input also array.

  attached a VI for your reference.

  VI generates 1000 randon numbers and trace the sine and cosine wave.