Splitting of attributes

Hey BusinessCatalyst, I have a bit more of a problem

So far, I like BusinessCatalyst but there are these small things that arise from time to time that make my somewhat difficult production. What

I am wanting to do is have my attributes that are in the creation of products made. That is already done. I have the color and size, more firmly.

Now I won't be simply included with the tag attribute on the product model. I really like them split with more than one attribute.

So to say as a tag attribute for the color and so on. Is there a way to do this or anything that might be similar to what I want to do in this situation?

Thank you very much for reading.

You can not yet do so fully.

If you see some people say 'do it with liquid"- they have not implemented correctly or watched it properly because the output is not 100% and does not entirely all data in British Colombia work properly (adding to the product to add to cart etc.) at this time.

Tags: Business Catalyst

Similar Questions

  • EZVPN connection fails with the error "Split tunnel higher than max attributes...."

    Hello

    We have ASA 5520 acting as the VPN server and the router Cisco 1941 as EZVPN client. These last days of customer is not able to establish the vpn connection. 1941 continuous router generates the below the log messages

    ---------------

    001569: Jul 22 ABC 12:19:05.883: CRYPTO-4-EZVPN_SA_LIMIT %: EZVPN (VPNGROUP) Split tunnel attributes (51) greater than max allowed split attributes (50)

    001574: Jul 22 ABC 12:19:07.835: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = vpn_user group = VPNGROUP Client_public_addr = Server_public_addr =

    004943: Jul 22 ABC 11:32:42.247: % IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the table fragment has reached its maximum 16

    ---------------

    Future prospects for aid and the suggestion of experts

    Thank you

    Israr Ahmad

    Yes, your split tunnel access-list is too big, and he has reached the maximum number of lines.

    Try to reduce the number of ACL for your tunnel of split ACL maybe combining the subnets if possible.

  • Cisco ASA ruled out a specific ip address of the split tunneling

    Hello

    I need help with a question on the split Tunneling Configuration.

    I have need exclude split tunneling networks already configured a specific ip address.

    This is my setup:

    Split_Tunnel list standard access allowed 192.168.0.0 255.255.0.0
    Split_Tunnel list standard access allowed 10.0.0.0 255.0.0.0

    attributes of Group Policy GroupPolicy_Anyconnect_Access_Exception_1
    WINS server no
    Server DNS value xxxxx xxxxxxx
    VPN - connections 3
    VPN-idle-timeout 480
    VPN-session-timeout no
    client ssl-VPN-tunnel-Protocol
    value of group-lock Anyconnect_access
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list Split_Tunnel
    field default value xxxxx
    Split-dns value telefonica wh.telefonica cic.wh.telefonica telefonica.corp t380.inet
    mailar.telefonica.Corp mailar.telefonica.com tefgad.com telefonicaglobalsolutions.com
    telefonicabusinesssolutions.com

    I need to exclude the split tunnel, IP 10.0.0.50, my question is, if I change the list access deny this IP, the supplementary tunnel will exclude the period of INVESTIGATION.

    example:

    Split_Tunnel list standard access deny 10.0.0.50 255.255.255.255

    Split_Tunnel list standard access allowed 192.168.0.0 255.255.0.0
    Split_Tunnel list standard access allowed 10.0.0.0 255.0.0.0

    BR,

    Fidel Gonzalez

    Hi Fidel,

    Yes, it should work; as in your example deny 10.0.0.50/32 sholud exclude the traffic in the tunnel.

    I tried in my lab, and in my case, access-list is:

    split_1 list standard access denied the host 10.2.2.250
    split_1 list standard access allowed 10.2.2.0 255.255.255.0

    And it worked he excluded the 10.2.2.250 host.

    The screen shot of the AnyConnect added:

    Concerning

    Véronique

  • Windows - Internet access, no split Tunnel L2TP VPN Clients does not

    Greetings!

    I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.

    I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.

    Here is the configuration:

    : Saved
    :
    ASA Version 1.0000 11
    !
    SGC hostname
    domain somewhere.com
    names of
    COMMENTS COMMENTS LAN 192.168.2.0 name description
    name 75.185.129.13 description of SGC - external INTERNAL ASA
    name 172.22.0.0 description of SITE1-LAN Ohio management network
    description of SITE2-LAN name 172.23.0.0 Lake Club Network
    name 172.24.0.0 description of training3-LAN network Southwood
    description of training3 - ASA 123.234.8.124 ASA Southwoods name
    INTERNAL name 192.168.10.0 network Local INTERNAL description
    description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
    description of Apollo name 192.168.10.4 INTERNAL domain controller
    description of DHD name 192.168.10.2 Access Point #1
    description of GDO name 192.168.10.3 Access Point #2
    description of Odyssey name 192.168.10.5 INTERNAL Test Server
    CMS internal description INTERNAL ASA name 192.168.10.1
    name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
    description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
    description of training3-VOICE name Southwood Voice Network 10.1.0.0
    name 172.25.0.0 description of training3-WIFI wireless Southwood
    !
    interface Vlan1
    nameif outside
    security-level 0
    IP address dhcp setroute
    !
    interface Vlan2
    nameif INSIDE
    security-level 100
    255.255.255.0 SGC-internal IP address
    !
    interface Vlan3
    nameif COMMENTS
    security-level 50
    IP 192.168.2.1 255.255.255.0
    !
    interface Ethernet0/0
    Time Warner Cable description
    !
    interface Ethernet0/1
    switchport access vlan 2
    switchport trunk allowed vlan 2-3
    switchport vlan trunk native 2
    switchport mode trunk
    !
    interface Ethernet0/2
    switchport access vlan 2
    switchport trunk allowed vlan 2-3
    switchport vlan trunk native 2
    switchport mode trunk
    !
    interface Ethernet0/3
    switchport access vlan 2
    switchport trunk allowed vlan 2-3
    switchport vlan trunk native 2
    switchport mode trunk
    !
    interface Ethernet0/4
    switchport access vlan 2
    switchport trunk allowed vlan 2-3
    switchport vlan trunk native 2
    switchport mode trunk
    !
    interface Ethernet0/5
    switchport access vlan 2
    switchport trunk allowed vlan 2-3
    switchport vlan trunk native 2
    switchport mode trunk
    !
    interface Ethernet0/6
    Description for Wireless AP Trunk Port
    switchport access vlan 2
    switchport trunk allowed vlan 2-3
    switchport vlan trunk native 2
    switchport mode trunk
    !
    interface Ethernet0/7
    Description for Wireless AP Trunk Port
    switchport access vlan 2
    switchport trunk allowed vlan 2-3
    switchport vlan trunk native 2
    switchport mode trunk
    !
    boot system Disk0: / asa821-11 - k8.bin
    Disk0: / config.txt boot configuration
    passive FTP mode
    clock timezone IS - 5
    clock to summer time EDT recurring
    DNS domain-lookup outside
    INTERNAL DNS domain-lookup
    DNS domain-lookup GUEST
    DNS server-group DefaultDNS
    Name-Server 4.2.2.2
    domain somewhere.com
    permit same-security-traffic inter-interface
    permit same-security-traffic intra-interface
    DM_INLINE_TCP_1 tcp service object-group
    EQ port 3389 object
    port-object eq www
    EQ object of the https port
    EQ smtp port object
    the DM_INLINE_NETWORK_1 object-group network
    network-object SITE1-LAN 255.255.0.0
    network-object SITE2-LAN 255.255.0.0
    network-object training3-LAN 255.255.0.0
    object-group training3-GLOBAL network
    Southwood description Global Network
    network-object training3-LAN 255.255.0.0
    network-object training3-VOICE 255.255.0.0
    network-object training3-WIFI 255.255.0.0
    DM_INLINE_TCP_2 tcp service object-group
    EQ port 5900 object
    EQ object Port 5901
    object-group network INTERNAL GLOBAL
    Description Global INTERNAL Network
    network-object INTERNAL 255.255.255.0
    network-object INTERNALLY-VPN 255.255.255.0
    access-list outside_access note Pings allow
    outside_access list extended access permit icmp any CMS-external host
    access-list outside_access note that VNC for Camille
    outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
    access-list outside_access note INTERNAL Services
    outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
    DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
    access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
    access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
    access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
    access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
    access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
    access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
    access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
    no pager
    Enable logging
    exploitation forest asdm warnings
    Debugging trace record
    Outside 1500 MTU
    MTU 1500 INTERNAL
    MTU 1500 COMMENTS
    192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
    no failover
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 623.bin
    enable ASDM history
    ARP timeout 14400
    Global 1 interface (outside)
    (INTERNAL) NAT 0 access-list sheep
    NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
    NAT (GUEST) 1 0.0.0.0 0.0.0.0
    5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
    3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
    public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
    public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
    public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
    5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
    Access-group outside_access in interface outside
    Timeout xlate 0:05:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    RADIUS protocol AAA-server Apollo
    Apollo (INTERNAL) AAA-server Apollo
    Timeout 5
    key *.
    AAA authentication enable LOCAL console
    the ssh LOCAL console AAA authentication
    AAA authentication LOCAL telnet console
    AAA authentication http LOCAL console
    Enable http server
    http 0.0.0.0 0.0.0.0 INTERNAL
    http 0.0.0.0 0.0.0.0 COMMENTS
    No snmp server location
    No snmp Server contact
    Community SNMP-server
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
    Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
    correspondence address 1 card crypto outside_map INTERNAL SITE1
    card crypto outside_map 1 set of peer SITE1 - ASA
    card crypto outside_map 1 set of transformation-ESP-3DES-SHA
    address for correspondence card crypto outside_map 2 INTERNAL training3
    outside_map 2 peer training3 - ASA crypto card game
    card crypto outside_map 2 game of transformation-ESP-3DES-SHA
    address for correspondence outside_map 3 card crypto INTERNAL SITE2
    game card crypto outside_map 3 peers SITE2 - ASA
    card crypto outside_map 3 game of transformation-ESP-3DES-SHA
    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
    outside_map interface card crypto outside
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    delimiter group @.
    Telnet training3 - ASA 255.255.255.255 outside
    Telnet SITE2 - ASA 255.255.255.255 outside
    Telnet SITE1 - ASA 255.255.255.255 outside
    Telnet 0.0.0.0 0.0.0.0 INTERNAL
    Telnet 0.0.0.0 0.0.0.0 COMMENTS
    Telnet timeout 60
    SSH enable ibou
    SSH training3 - ASA 255.255.255.255 outside
    SSH SITE2 - ASA 255.255.255.255 outside
    SSH SITE1 - ASA 255.255.255.255 outside
    SSH 0.0.0.0 0.0.0.0 INTERNAL
    SSH 0.0.0.0 0.0.0.0 COMMENTS
    SSH timeout 60
    Console timeout 0
    access to the INTERNAL administration
    Hello to tunnel L2TP 100
    interface ID client DHCP-client to the outside
    dhcpd dns 4.2.2.1 4.2.2.2
    dhcpd ping_timeout 750
    dhcpd outside auto_config
    !
    address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
    dhcpd Apollo Odyssey interface INTERNAL dns
    dhcpd somewhere.com domain INTERNAL interface
    interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
    enable dhcpd INTERNAL
    !
    dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
    dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
    enable dhcpd COMMENTS
    !

    a basic threat threat detection
    statistical threat detection port
    Statistical threat detection Protocol
    Statistics-list of access threat detection
    a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
    NTP server 192.43.244.18 prefer external source
    WebVPN
    allow outside
    CSD image disk0:/securedesktop-asa-3.4.2048.pkg
    SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
    SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
    enable SVC
    Group Policy DefaultRAGroup INTERNAL
    attributes of Group Policy DefaultRAGroup
    Server DNS 192.168.10.4 value
    Protocol-tunnel-VPN l2tp ipsec
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
    value by default-domain somewhere.com
    Group Policy DefaultWEBVPNGroup INTERNAL
    attributes of Group Policy DefaultWEBVPNGroup
    VPN-tunnel-Protocol webvpn
    Group Policy DefaultL2LGroup INTERNAL
    attributes of Group Policy DefaultL2LGroup
    Protocol-tunnel-VPN IPSec l2tp ipsec
    Group Policy DefaultACVPNGroup INTERNAL
    attributes of Group Policy DefaultACVPNGroup
    VPN-tunnel-Protocol svc
    attributes of Group Policy DfltGrpPolicy
    value of 192.168.10.4 DNS Server 4.2.2.2
    VPN - 25 simultaneous connections
    VPN-idle-timeout no
    Protocol-tunnel-VPN IPSec
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
    value by default-domain somewhere.com
    the value INTERNAL VPN address pools
    chip-removal-disconnect disable card
    WebVPN
    SVC keepalive no
    client of dpd-interval SVC no
    dpd-interval SVC bridge no
    value of customization DfltCustomization
    attributes global-tunnel-group DefaultRAGroup
    VPN INTERNAL address pool
    Group Policy - by default-DefaultRAGroup
    IPSec-attributes tunnel-group DefaultRAGroup
    pre-shared-key *.
    Disable ISAKMP keepalive
    tunnel-group DefaultRAGroup ppp-attributes
    No chap authentication
    no authentication ms-chap-v1
    ms-chap-v2 authentication
    attributes global-tunnel-group DefaultWEBVPNGroup
    VPN INTERNAL address pool
    Group Policy - by default-DefaultWEBVPNGroup
    tunnel-group 123.234.8.60 type ipsec-l2l
    IPSec-attributes tunnel-group 123.234.8.60
    pre-shared-key *.
    tunnel-group 123.234.8.124 type ipsec-l2l
    IPSec-attributes tunnel-group 123.234.8.124
    pre-shared-key *.
    tunnel-group 123.234.8.189 type ipsec-l2l
    IPSec-attributes tunnel-group 123.234.8.189
    pre-shared-key *.
    type tunnel-group DefaultACVPNGroup remote access
    attributes global-tunnel-group DefaultACVPNGroup
    VPN INTERNAL address pool
    Group Policy - by default-DefaultACVPNGroup
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the netbios
    inspect the rsh
    inspect the rtsp
    inspect the skinny
    inspect esmtp
    inspect sqlnet
    inspect sunrpc
    inspect the tftp
    inspect the sip
    inspect xdmcp
    inspect the http
    inspect the they
    !
    global service-policy global_policy
    context of prompt hostname
    Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
    : end
    ASDM image disk0: / asdm - 623.bin
    ASDM location Camille 255.255.255.255 INTERNAL
    ASDM location INTERNAL CGT-external 255.255.255.255
    ASDM location INTERNAL SITE1-LAN 255.255.0.0
    ASDM location INTERNAL SITE2-LAN 255.255.0.0
    ASDM location INTERNAL training3-LAN 255.255.0.0
    ASDM location INTERNAL training3 - ASA 255.255.255.255
    ASDM location INTERNAL GDO 255.255.255.255
    ASDM location INTERNAL SITE1 - ASA 255.255.255.255
    ASDM location INTERNAL SITE2 - ASA 255.255.255.255
    ASDM location INTERNAL training3-VOICE 255.255.0.0
    ASDM location puppy 255.255.255.255 INTERNAL
    enable ASDM history

    I should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.

    You must configure * intercept-dhcp enable * in your group strategy:

    attributes of Group Policy DefaultRAGroup

    attributes of Group Policy DefaultRAGroup

    Server DNS 192.168.10.4 value
    Protocol-tunnel-VPN l2tp ipsec
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
    value by default-domain somewhere.com

    Intercept-dhcp enable

    -Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked.  It is located on the Advanced tab of VPN client TCP/IP properties.   Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.

    Alex

  • No split tunnel-access internet via isa in dmz

    Hello

    I have configured my asa 5520 v 7.2 for remote VPN. Its works fine. I need to provide my customer internet access without activating split tunnel. I went through a few example below of a doc:

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

    the preceding is not enough more me like one have different needs

    I want my client VPN to ASA and access to internet, I had ISA connected to the VPN device. All my vpn clients want access to the internet, it must use this operation to access the internet. My ISA server is in the same subnet of the VPN device by using a different gw for internet access.

    Pls comment

    Add the below: -.

    attributes of the strategy of group staffvpn

    use a MSIE-proxy-server method

    Internet Explorer-proxy server value x.x.x.x

    Disable Internet Explorer-proxy local-bypass

    attributes of the strategy of group staffvpn

    use a MSIE-proxy-server method

    Internet Explorer-proxy server value x.x.x.x

    Disable Internet Explorer-proxy local-bypass

    attributes of the strategy of group newstaffvpn

    use a MSIE-proxy-server method

    Internet Explorer-proxy server value x.x.x.x

    Disable Internet Explorer-proxy local-bypass

    adel username attributes

    use a MSIE-proxy-server method

    Internet Explorer-proxy server value x.x.x.x

    Disable Internet Explorer-proxy local-bypass

    username weppe attributes

    use a MSIE-proxy-server method

    Internet Explorer-proxy server value x.x.x.x

    Disable Internet Explorer-proxy local-bypass

    Remote VPN group no matter what you want to test with. where x.x.x.x is the IP address of the ISA server computer.

    HTH.

  • Defined by RADIUS split - include on SAA

    We are in the process of migrating from a VPN architecture based on IOS AnyConnect SSL access to an ASA base.

    Everything seems to work fine except for one thing. "We use a RADIUS defined by split - include to ensure that some users have access to only their networks using the cisco-avpair ' webvpn:split - include = #. #. #. # 255.255.255.0"which works well on the installation of IOS, but not on the ASA. I can verify that the AV pair is provided as part of the authentication process, the ASA (version 9.1 (6), btw) ignores and gives full access to the client using the ACL specified in the configuration.

    Despite a few hours of googling and SEO Cisco AnyConnect ASA documentation, I find not a reference to this problem. I suspect that the AV pair in question is specific to the IOS, but impossible to find confirmation of this or the other.

    Anyone encountered this?

    Jody

    Hi Jody,.

    Looks like this pair of av is not available for ASA

    http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa82/configuration/gu...

    You can try to use

    Cisco (AV) attribute value pair (ID # 26/9/1) as shown on the guide.

    HTH

    Averroès.

  • Split DNS on ASA 5510 access remote vpn works not

    I connect successfully to the tunnel and can ping hosts remotely by IP but am unable to browse the internet from the VPN client. Also, the resolution of host name on the remote end does not work... can only connect through the IP address. Ideas? Thanks again!

    Your group policy will SUFFER a good split tunneling and divide the dns settings. But I think that you are awarded the DfltGrpPolicy rather than your group policy will SUFFER because group policy is not set in your group of tunnel, nor be transmitted from authentication.

    Make a vpn-sessiondb distance 'show' to confirm what group policy is assigned to fix it, assign your group policy will BE to your group of tunnel as follows:

    global-tunnel-group attributes

    Will BE by default-group-policy

    -heather

  • L2TP Windows 7, split and site-to-site tunnel

    Hi all

    I'm going to this interesting problem that drives me crazy all day. I have ASA 5505 (ver 9) where I set up VPN site-to-site to another router and it works. Then I configured L2TP IPsec VPN on SAA with split tunneling, and I can reach my local network. The problem is when I am trying to reach this remote network that is behind this site-to-site VPN. Whatever I do, I'm not able to reach the network. This exact same setup works on different ASA with AnyConnect VPN.

    So that's what I did:

    (1) adds VPN subnet as ITS 2nd to the existing site-to-site VPN

    (2) exemption from NAT configured for subnet VPN when you go to the remote subnet

    (3) published the remote subnet to VPN client.

    This should do the trick as it does when AnyConnect is in question.

    I'll paste some commands concerning:

    local pool VPN_POOL 192.168.255.100 - 192.168.255.235 255.255.255.0 IP mask

    network of the L2TP-VPN-sub-network object
    192.168.255.0 subnet 255.255.255.0

    access extensive list ip 192.168.17.0 outside_cryptomap allow 255.255.255.0 Site object - 172.16.17.0
    outside_cryptomap to access extended list ip 192.168.255.0 allow 255.255.255.0 Site object - 172.16.17.0
    Split-Tunnel-ACL access-allowed list standard 192.168.17.0 255.255.255.0
    Split-Tunnel-ACL access-allowed list standard 172.16.17.0 255.255.255.0

    NAT (inside, outside) static source to the inside network inside-network destination Site - 172.16.17.0 of azure - static non-proxy-arp 172.16.17.0
    NAT (inside, outside) static source to the inside network inside-network destination static L2TP-VPN-sub-network L2TP-VPN-slot-network non-proxy-arp-search directions
    NAT (inside, outside) static source L2TP VPN sub network L2TP-VPN-sub-network static destination Site - 172.16.17.0 Site - 172.16.17.0 no-proxy-arp-search to itinerary

    internal VPN_L2TP_IPSEC group policy
    VPN_L2TP_IPSEC group policy attributes
    value of server DNS 172.16.17.4
    Protocol-tunnel-VPN l2tp ipsec
    Split-tunnel-policy tunnelspecified
    Split-tunnel-network-list value Split-Tunnel-ACL
    value by default-field * *.com
    Split-dns value * *.com
    enable dhcp Intercept 255.255.255.0

    attributes global-tunnel-group DefaultRAGroup
    address VPN_POOL pool
    Group Policy - by default-VPN_L2TP_IPSEC
    IPSec-attributes tunnel-group DefaultRAGroup
    IKEv1 pre-shared-key *.
    tunnel-group DefaultRAGroup ppp-attributes
    ms-chap-v2 authentication

    Someone at - he managed to get this configuration works? I guess I'm missing some details here, but I don't see that. Perhaps it does not work with L2TP?

    Hello, Damir Reic.

    What do you use NAT for L2TP-VPN? Split tunneling is help your users internet direcrly so you don't need to use NAT. It can be a source of problem as NAT works before VPN site to site. If your remote users traffic could be changed to NAT and IP traffic that wi source address will be different. And for this reason, it is not rules hiting your site-to-site VPN.

  • VPN, Internet and a Split Tunnels traffic

    Please attached photo because I hope that explains what I really want to do, but here's the break down.

    When a VPN Client connects to remote access to 1-ASA5510 I want all Internet traffic to send to 2 - ASA5510 instead of back to the default route. When it comes out 2-ASA5510, it passes through the content filter. 2 - ASA5510 has Split Tunnel put in place and we are trying to do away with Tunnel from SPlit.

    I hope this is clear enough.

    Any ideas would be helpful

    Dan

    Dan,

    Difficult but doable! First of all, there is a nice feature in the ASA that allows configuration of remote proxy based on VPN profile by: -.

    Group Policy <> attributes

    use a MSIE-proxy-server method

    Internet Explorer-proxy server value x.x.x.x

    activate Internet Explorer-proxy local-bypass

    Well Yes you guessed it - works only on Microsoft Internet Explorer.

    I don't think that any policy based routing would work for you - bad luck.

    But you can try another feature - traffic through the tunnel, which is normally used in the topllogy of EasyVPN: -.

    http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd8060b477.html

    Configuration of the ASA at the bottom, I probably would test this with the IP address of the 2651 router!

    HTH.

  • VPN without split tunnel

    Hello everyone

    I have setup a VPN connection, which I can connect to. For all customers of connection, I want to give them an IP (from a subnet maybe) and let them use this IP address for all that they do.
    Therefore, this:

    and not current:

    My inside is 192.168.1.0
    My VPN IP pool is 192.168.30.5 - 200
    My server (DNS, files, Web site) is 192.168.1.222

    Here's my setup. I scored what I thought might have something to do with it:

    ASA Version 9.2 (1)
    !
    ciscoasa hostname
    activate 8Ry2YjIyt7RRXU24 encrypted password
    volatile xlate deny tcp any4 any4
    volatile xlate deny tcp any4 any6
    volatile xlate deny tcp any6 any4
    volatile xlate deny tcp any6 any6
    volatile xlate deny udp any4 any4 eq field
    volatile xlate deny udp any4 any6 eq field
    volatile xlate deny udp any6 any4 eq field
    volatile xlate deny udp any6 any6 eq field
    2KFQnbNIdI.2KYOU encrypted passwd
    names of
    pool of IP local IP-pool 192.168.30.5 - 192.168.30.200 mask 255.255.255.0
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    interface Vlan1
    nameif inside
    security-level 100
    IP 192.168.1.253 255.255.255.0
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP address dhcp setroute
    !
    boot system Disk0: / asa921 - k8.bin
    passive FTP mode
    permit same-security-traffic intra-interface
    network obj_any object
    subnet 0.0.0.0 0.0.0.0
    network of the object Server-25
    Home 192.168.1.222
    Description of the test server
    network of the object server-80
    Home 192.168.1.222
    Description of the test server
    network of the object server-443
    Home 192.168.1.222
    Description of the test server
    network of the object server-2525
    Home 192.168.1.222
    Description of the test server
    network of the object server-993
    Home 192.168.1.222
    Description of the test server
    network of the object server-6001
    Home 192.168.1.222
    Description of the test server
    network of the object server-6002
    Home 192.168.1.222
    Description of the test server
    network of the object server-6003
    Home 192.168.1.222
    Description of the test server
    network of the object server-6004
    Home 192.168.1.222
    Description of the test server
    network of the VPN HOST object
    192.168.30.0 subnet 255.255.255.0
    the object to the Interior-net network
    host 192.168.1.0
    the VPN server object network
    Home 192.168.1.222
    outside_access_in list extended access permit tcp any object Server-25 eq smtp
    outside_access_in list extended access permit tcp any object server-2525 2525 eq
    outside_access_in list extended access permit tcp any object server-80 eq www
    outside_access_in list extended access permit tcp any object server-443 https eq
    outside_access_in list extended access permit tcp any object server-993 993 eq
    outside_access_in list extended access permit tcp any object server-6001 eq 6001
    outside_access_in list extended access permit tcp any object server-6002 6002 eq
    outside_access_in list extended access permit tcp any object server-6003 eq 6003
    outside_access_in list extended access permit tcp any object server-6004 eq 6004
    outside_access_in to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.30.0 255.255.255.0
    permit access-list Split-Tunnel-ACL standard 192.168.30.0 255.255.255.0
    no pager
    Enable logging
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 721.bin
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    NAT (indoor, outdoor) Interior-net Interior-NET static source static destination HOST-VPN-VPN-HOST
    NAT VPN VPN-server destination (indoor, outdoor) static static source HOST-VPN-VPN-HOST
    !
    network obj_any object
    NAT dynamic interface (indoor, outdoor)
    network of the object Server-25
    NAT (inside, outside) interface static tcp smtp smtp service
    network of the object server-80
    NAT (inside, outside) interface static tcp www www service
    network of the object server-443
    NAT (inside, outside) interface static tcp https https service
    network of the object server-2525
    NAT (inside, outside) interface static 2525 2525 tcp service
    network of the object server-993
    NAT (inside, outside) interface static tcp 993 993 service
    network of the object server-6001
    NAT (inside, outside) interface static tcp 6001 6001 service
    network of the object server-6002
    NAT (inside, outside) interface static tcp 6002 6002 service
    network of the object server-6003
    NAT (inside, outside) interface static 6003 6003 tcp service
    network of the object server-6004
    NAT (inside, outside) interface static service tcp 6004 6004
    Access-group outside_access_in in interface outside
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    RADIUS AAA server HSS-auth-server protocol
    allow only
    AAA-server HSS-auth-server (inside) host 192.168.1.222
    Timeout 5
    key *.
    identity of the user by default-domain LOCAL
    Enable http server
    http 192.168.1.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec pmtu aging infinite - the security association
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
    outside_map interface card crypto outside
    trustpool crypto ca policy
    Crypto isakmp nat-traversal 30
    Crypto ikev1 allow outside
    IKEv1 crypto policy 10
    authentication crack
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 20
    authentication rsa - sig
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 30
    preshared authentication
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 40
    authentication crack
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 50
    authentication rsa - sig
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 60
    preshared authentication
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 70
    authentication crack
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 80
    authentication rsa - sig
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 90
    preshared authentication
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 100
    authentication crack
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 110
    authentication rsa - sig
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 120
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 130
    authentication crack
    the Encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 140
    authentication rsa - sig
    the Encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 150
    preshared authentication
    the Encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH stricthostkeycheck
    SSH timeout 5
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0

    interface ID client DHCP-client to the outside
    dhcpd outside auto_config
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    internal HSSvpn group strategy
    attributes of Group Policy HSSvpn
    value of server WINS 192.168.1.222
    value of server DNS 192.168.1.222
    Ikev1 VPN-tunnel-Protocol
    Split-tunnel-policy tunnelall
    Split-tunnel-network-list value Split-Tunnel-ACL
    HSS.dk value by default-field
    activate dns split-tunnel-all
    type tunnel-group HSSvpn remote access
    attributes global-tunnel-group HSSvpn
    address IP-pool pool
    HSS-auth-server authentication-server-group
    Group Policy - by default-HSSvpn
    password-management
    IPSec-attributes tunnel-group HSSvpn
    IKEv1 pre-shared-key *.
    tunnel-group HSSvpn ppp-attributes
    No chap authentication
    no authentication ms-chap-v1
    ms-chap-v2 authentication
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    !
    global service-policy global_policy
    context of prompt hostname
    no remote anonymous reporting call
    Cryptochecksum:c85ff8bf61669bef56b4dad704a4930a
    : end

    Hello

    Change Split Tunnel VPN in full Tunnel VPN, you have really do much in your configuration.

    Seems that have already changed you the 'tunnelspecified' 'tunnelall' in configurations of the 'group policy' . You can delete the setup but that defines the ACL of Split Tunnel

    attributes of Group Policy HSSvpn
    No split-tunnel-network-list value Split-Tunnel-ACL

    Seems that you use an internal AAA server to manage authentication rather than on the SAA. I guess if you want to assign a specific IP address for VPN user/username, then it must be done on the side Server?

    If you had the "username" on the SAA configurations you can set it up under its framework which "username" IP address gets when he or she connects with the VPN Client.

    As naturally as you start using the complete Tunnel and all traffic from the VPN Client starts to get in the tunnel to the ASA you will need a NAT for VPN Client users Internet traffic. You can configure this NAT like this for example:

    network of the VPN-POOL object
    192.168.30.0 subnet 255.255.255.0

    interface of VPN-POOL dynamic NAT (outside, outside) after auto source

    Note that this is a manual of NAT / double NAT statement real "nat" IS NOT inserted under the 'object' , but the 'object' is rather created it can be used in the "nat" command. I see that your other dynamic PAT configurations are configured with NAT Auto / object NAT network. You can do this like that too if you wish. Personally I do like that.

    But as I said before, it seems that you have already configured the VPN to be full of Tunnel. It is perhaps not as it is? While it is connected with VPN, you should be able to check the secure routes (or something like that) section to see if it says "0.0.0.0" If Yes, then it should be tunneling all traffic.

    Hope this helps :)

    -Jouni

  • Split on PIX 7.2 tunnel (2)

    I upgraded pix from the customer to 7.2 (2). Now, the split tunnel doesn't seem to work. The vpn works, but according to the vpnclient (4.8 and 5.0) still routing all data through the vpn connection.

    All advice appreciated. Thank you!

    The current configuration is attached.

    Add...

    tunnel-group vpn1 General attributes

    strategy-group-by default vpn1

    Please evaluate the useful messages.

  • Problems with basic setup and split tunneling VPN

    I created a SSL VPN in an ASA CISCO ASDM 6.6 8.6 running.
    IM able to connect to the VPN and reach all the devices with the LAN but I am not able to browse the web. When I activate the tunnel split Im able to browse the web, but then Im not able to reach any internal device.
    Here is part of the show's run:

    network of the RedInterna object
    150.211.101.0 subnet 255.255.255.0
    Description Red Interna
    network of the NETWORK_OBJ_10.4.1.0_28 object
    subnet 10.4.1.0 255.255.255.240
    inside_access_in list extended access permitted ip object RedInterna all
    Standard access list VPN_INTERNET allow 150.211.101.0 255.255.255.0
    pager lines 24
    Enable logging
    asdm of logging of information
    Outside 1500 MTU
    Within 1500 MTU
    management of MTU 1500
    local pool VPN_POOL 10.4.1.1 - 10.4.1.14 255.255.255.240 IP mask
    failover
    secondary failover lan unit
    failover lan interface GigabitEthernet0 fail-1/2
    key changeover *.
    failover interface ip fail-1 10.3.1.21 255.255.255.252 watch 10.3.1.22
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 66114.bin
    enable ASDM history
    ARP timeout 14400
    NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.4.1.0_28 NETWORK_OBJ_10.4.1.0_28 non-proxy-arp-search to itinerary
    !
    NAT source auto after (indoor, outdoor) dynamic one interface
    inside_access_in access to the interface inside group
    Route outside 0.0.0.0 0.0.0.0 187.217.68.145 1
    Route inside 10.0.0.0 255.0.0.0 10.1.1.78 1
    Route inside 150.211.0.0 255.255.0.0 10.1.1.78 1

    WebVPN
    allow outside
    AnyConnect image disk0:/anyconnect-win-3.1.00495-k9.pkg 1
    AnyConnect enable
    tunnel-group-list activate
    internal GroupPolicy_VPN_ group strategy
    attributes of Group Policy GroupPolicy_VPN_
    WINS server no
    value of server DNS 8.8.8.8
    client ssl-VPN-tunnel-Protocol
    dominio.com.MX value by default-field
    type tunnel-group VPN_ remote access
    attributes global-tunnel-group VPN_
    address VPN_POOL pool
    Group Policy - by default-GroupPolicy_VPN_
    tunnel-group VPN_ webvpn-attributes
    enable VPN_ group-alias
    !

    I m don't know if Im missing a few small details or Setup. Any help will be much appreciated.
    Thank you!!!

    Hello

    When you use full VPN Tunnel (which is the default setting), you will have a number of things that you need to configure on the SAA.

    First, the ASA by default will not allow traffic to enter via an interface and then exit through the same interface. It is essentially, what happens when the customer VPN traffic comes to the ASA and then heads on the Internet.  In your case the traffic goes through the 'outside' and leaves via the 'outside' interface.

    You will need this command

    permit same-security-traffic intra-interface

    You can check if their licence at the moment with the command

    See the race same-security-traffic

    Second, VPN users will need to have the NAT configuration like all users LAN behind the ASA real. So you basically configure dynamic PAT for 'outside' to 'outside' traffic

    You can get there with the following configuration

    network of the VPN-PAT object

    subnet 10.4.1.0 255.255.255.240

    dynamic NAT interface (outdoors, outdoor)

    I suppose it should do for you to be able to connect to the Internet and the LAN when the VPN is active.

    Hope this helps

    Let me know how it goes.

    -Jouni

  • ASA 5505 Split Tunneling configured but still all traffic Tunneling

    Hello

    I installed an ASA 5505 running 8.3.2 and Cisco AnyConnect Client 2.5.2017.

    There are the DefaultRAGroup and a newly configured Group called SplitTunnelNets.

    I have 1 internal subnet (192.168.223.0/24) which has a matching ACL/AS configured on the DefaultRAGroup and the custom group policy called SSLClientPolicy.

    When I start the VPN with the ASA, I can indeed reach internal resources, but when I look at the routing table, I see a new default gateway route 0.0.0.0 / 0-> 192.168.25.2 (that is in the IP pool) with a metric of 2.  The default route before the start of the session AnyConnect now has a higher metric, so the 192.168.25.2 next hop is a priority.

    I don't see the routes in the routing table for 192.168.223.0/24 as I expect to see.  In the diagnosis of AnyConnect, I see that 0.0.0.0/0 is the policy applied to the client.

    Here's my setup.  Please tell me if you see something that I'm missing.

    ASA 8.3 Version (2)
    !
    host name asa

    names of
    !
    interface Vlan1
    nameif inside
    security-level 100
    IP 192.168.223.254 255.255.255.0
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP x.x.x.x 255.255.255.240
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    boot system Disk0: / asa832 - k8.bin
    passive FTP mode
    clock timezone IS - 5
    clock to summer time EDT recurring
    DNS lookup field inside
    DNS server-group DefaultDNS
    Server name 192.168.223.41
    domain Labs.com
    network obj_any object
    subnet 0.0.0.0 0.0.0.0
    vpn-client-net network object
    255.255.255.0 subnet 192.168.25.0
    network of the internal net object
    192.168.223.0 subnet 255.255.255.0
    the DM_INLINE_NETWORK_1 object-group network
    internal-net network object
    network-vpn-client-net object
    the DM_INLINE_NETWORK_2 object-group network
    internal-net network object
    network-vpn-client-net object
    SplitTunnelNets to access extensive ip list allow any 192.168.223.0 255.255.255.0
    pager lines 24
    Enable logging
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    mask 192.168.25.1 - 192.168.25.50 255.255.255.0 IP local pool SSLClientPool
    no failover
    ICMP unreachable rate-limit 1 burst-size 1
    ICMP allow any inside
    ASDM image disk0: / asdm - 635.bin
    don't allow no asdm history
    ARP timeout 14400
    NAT (inside, all) static source internal-net net internal static destination vpn client vpn client-Net
    !
    network obj_any object
    NAT dynamic interface (indoor, outdoor)
    Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    Labs-AAA protocol ldap LDAP-server
    AAA-server Lab-LDAP (inside) host 192.168.223.41
    Server-port 636
    LDAP-base-dn dc = labs, dc = com
    LDAP-scope subtree
    LDAP-naming-attribute sAMAccountName
    LDAP-login-password *.
    LDAP-connection-dn [email protected] / * /
    enable LDAP over ssl
    microsoft server type
    Enable http server
    http 192.168.223.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Crypto ca trustpoint ASDM_TrustPoint0
    registration auto

    sslvpnkeypair key pair
    Configure CRL
    Crypto ca trustpoint ASDM_TrustPoint1
    ASDM_TrustPoint1 key pair
    Configure CRL
    string encryption ca ASDM_TrustPoint0 certificates

    Telnet 192.168.223.0 255.255.255.0 inside
    Telnet timeout 5
    SSH 192.168.223.0 255.255.255.0 inside
    SSH timeout 5
    Console timeout 0
    dhcpd outside auto_config
    !

    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    NTP 192.5.41.41 Server
    NTP 192.5.41.40 Server
    SSL-trust outside ASDM_TrustPoint1 point
    WebVPN
    allow outside
    No anyconnect essentials
    SVC disk0:/anyconnect-win-2.5.2017-k9.pkg 1 image
    SVC disk0:/anyconnect-macosx-i386-3.0.0629-k9.pkg 2 image
    Picture disk0:/anyconnect-linux-3.0.0629-k9.pkg 3 SVC
    enable SVC
    tunnel-group-list activate
    internal SSLClientPolicy group strategy
    attributes of Group Policy SSLClientPolicy
    value of server DNS 192.168.223.41
    VPN-tunnel-Protocol svc
    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list SplitTunnelNets

    field default value Labs
    split dns value Labs.com
    the address value SSLClientPool pools
    WebVPN
    SVC Dungeon-Installer installed
    attributes of Group Policy DfltGrpPolicy
    value of server DNS 192.168.223.41
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list SplitTunnelNets
    coyotelabs.com value by default-field
    type of remote access service
    type tunnel-group SSLClientProfile remote access
    attributes global-tunnel-group SSLClientProfile
    CoyoteLabs-LDAP authentication-server-group
    Group Policy - by default-SSLClientPolicy
    tunnel-group SSLClientProfile webvpn-attributes
    allow group-alias CoyoteLabs
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    !
    global service-policy global_policy
    context of prompt hostname
    Cryptochecksum:95b7ff58b54e02948a14b225eec1a990
    : end

    The split tunnel access list must be standard access-list, not extended access list.

    You must change the following:
    FROM: SplitTunnelNets access-list extended ip to allow all 192.168.223.0 255.255.255.0
    To: SplitTunnelNets standard access list allows 192.168.223.0 255.255.255.0

    You should be able to reconnect again and will be able to access the Internet after you set up the standard access-list split tunnel.

    Hope that helps.

  • How to disable WebVPN attributes in the configuration file

    All the attributes of sudden webvpn (illustrated below) make their appearance in my config file? I disabled protocols tunnels webvpn in my default group policy, but that did not help. Anyone has an idea where completely disable it so it will not be displayed in my config file?

    Thank you.

    = part of config which shows webvpn =.

    attributes of Group Policy DfltGrpPolicy

    No banner

    WINS server no

    DNS server no

    DHCP-network-scope no

    VPN-access-hour no

    VPN - connections 3

    VPN-idle-timeout no

    VPN-session-timeout no

    VPN-filter no

    Protocol-tunnel-VPN IPSec

    disable the password-storage

    disable the IP-comp

    Re-xauth disable

    Group-lock no

    disable the PFS

    IPSec-udp disable

    IPSec-udp-port 10000

    Split-tunnel-policy tunnelall

    Split-tunnel-network-list no

    by default no

    Split-dns no

    disable secure authentication unit

    disable authentication of the user

    user-authentication-idle-timeout 30

    disable the IP-phone-bypass

    disable the leap-bypass

    disable the NEM

    Dungeon-client-config backup servers

    the firewall client no

    rule of access-client-none

    WebVPN

    None works

    HTML-content-filter none

    Home page no

    4 Keep-alive-ignore

    gzip http-comp

    no filter

    list of URLS no

    value of customization DfltCustomization

    port - forward, no

    port-forward-name value access to applications

    SSO-Server no

    value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information

    SVC no

    SVC Dungeon-Installer installed

    SVC keepalive no

    generate a new key SVC time no

    method to generate a new key of SVC no

    client of dpd-interval SVC no

    dpd-interval SVC bridge no

    deflate compression of SVC

    Hello

    Try the below command. See that it works.

    attributes of Group Policy DfltGrpPolicy

    No webvpn

    Thank you

    Gilbert

    Rate this post, if this can help!

  • Attribute LDAP AnyConnect Map

    I'm trying to configure the attribute map for our SSL Anyconnect Client connections. Basically I want all connections to be deleted, unless the AD attribute numbering is set to allow users.

    I have it working. But according to the instructions of Cisco, you create a group policy for NoAccess as your default strategy for your connection profile and kinematics-connections set to 0. The idea being to all connections will be dropped unless they use a different group strategy. As soon as I change my strategy of group - by default-NoAccess, I can not connect.

    ldap attribute-map LDAPVPN
    
      map-name  msNPAllowDialin IETF-Radius-Class
    
      map-value msNPAllowDialin FALSE NOACCESS
    
      map-value msNPAllowDialin TRUE SSL-VPN
    

    aaa-server LDAP protocol ldap
    
    aaa-server LDAP (inside) host 192.200.202.5
    
    server-port 389
    
    ldap-base-dn dc=*****,dc=com
    
    ldap-scope subtree
    
    ldap-naming-attribute sAMAccountName
    
    ldap-login-password *****
    
    ldap-login-dn CN=cisco,OU=Service,OU=Accounts,OU=*****,DC=******,DC=com
    
    server-type microsoft
    
    ldap-attribute-map LDAPVPN
    

    group-policy SSL-VPN internal
    
    group-policy SSL-VPN attributes
    
    dns-server value 192.200.202.5 192.200.202.6
    
    vpn-tunnel-protocol svc
    
    split-tunnel-policy tunnelspecified
    
    split-tunnel-network-list value VPN-Tunnel
    
    group-policy NoAccess internal
    
    group-policy NoAccess attributes
    
    vpn-simultaneous-logins 0
    
    vpn-tunnel-protocol IPSec svc
    
    webvpn
    
      svc ask none default svc
    

    tunnel-group SSL-VPN type remote-access
    
    tunnel-group SSL-VPN general-attributes
    
    address-pool ssl-pool
    
    authentication-server-group LDAP
    
    default-group-policy NoAccess
    
    tunnel-group SSL-VPN webvpn-attributes
    
    group-alias ******* enable
    


     If I check debug you can see the attribute being mapped correctly. What gives?
    
    

    test aaa authorization LDAP host 192.200.202.5 username ****
    

    [333]   msNPAllowDialin: value = TRUE
    
    [333]           mapped to IETF-Radius-Class: value = SSL-VPN
    
    [333]           mapped to LDAP-Class: value = SSL-VPN
    


     
     
    			 
    Hello, please follow these steps:
    

    attributes of SSL - VPN group policy
    

    VPN - connections 3
    

    What is happening here is that the SSL - VPN group policy inherits the value 0 of concurrent vpn connections to NoAccess policy as soon as set you it uo as default group policy under the tunnel-group. That's why we need to specifically add value on SSL - VPN group policy.

Maybe you are looking for

  • An anti virus for multipoint Server 2011?

    I am a teacher using multipoint Server 2011 with computing devices of N. I can't install 2011 anti virus trend micro titanium or kasperskey anti virus 2011 on my work stations please help...

  • 0x80072EFF when you perform the update from Microsoft for windows XP PRO. Microsoft Windows would load--not Internet (there!)

    I kept getting error 0X80072EFF whenever I run Microsoft Update for my Dell latitude XP pro. Windows Update would not, saying no connection, although it is. I tried some of the solutions proposed, including the installation and execution of Malwaebyt

  • Background music on DVD is stronger than the word.

    When I play a DVD of some of the music seems perfectly normal however when a person speaks, I can hardly hear them.  I'm able to increase the volume to hear them, but when something else comes on it is much too strong. I checked all the speaker plug-

  • Anyone know what could be this object?

    I recently bought a windows 7 computer, HP OMNI 220 premium. When I opened the packaging, there are not very many regions, but there is one thing I can't understand just what it is about everything. Its a very long cord, one end of a form similar to

  • The RV042 can access Internet

    I am new to implement VPN service.  I want to do this is to install a RV042 or RV082 (for extra speed) and configure it to allow me to access the Internet (from home port) by the VPN from anywhere so that on the road and using my laptop.  My question