Spooler service.

Similar Questions

• Print Spooler service is not running

  I'm trying to re - install my printer, but I get a message that says "operation could not be performed. Print Spooler service is not running.

  Hi pyq718,

  Follow the steps below to check the print spooler.

  1. type services.msc in run (XP) or search programs and files (Win 7 and Vista)

  2. click on the (local) Service

  3. scroll down until you get to the print spooler, and then click on it once to select it.

  4. in the top left corner, you can stop and then start the spooler to make sure it is running.

  

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• Problem printing - "operation not completed; "print spooler service does not.

  My laptop has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. Print Spooler service is not running", even though when I look in the Services, it is running. I am running XP Build 2600.xpsp_sp2_gdr.050301 - 1519: Service Pack 2.

  Hello

  According to the description in this document from the Microsoft Knowledge base:
  http://support.Microsoft.com/?kbid=314876

  Please try this:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field.

  Maybe it helps you solve this problem.

• How can I activate the print spooler service on

  My computer says the print spooler service stops when I'm going to use a printer. How do I reactivate.

  Hello
  Please tell us the version of the Windows operating system you are running on your computer.

  I'd take a peek at this thread as well. It is specific to Windows 7, but you should be able to many of the same steps apply to Windows Vista or Windows XP if you happen to have one of the people.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/print-spooler-issues-in-Windows-7/3ae31e43-71ce-4847-ad9e-1d2936eabb83

  I hope this helps. Just reply to the results.

• Spooler service is not running

  the printer does not and he said that the spooler service is not running.  Help please

  Hello

  (1) did you make any changes before the show?

  (2) what is the brand and model of the computer?

  (3) Windows operating system you are using?

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. right click on the print spooler service, and then click Properties.

  4. on the general tab, next to startup type, make sure that automatic is selected.

  5. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:

  Open printer troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Spooler services printing does not start, error Code 1053

  Original title: Error 1053

  Hello

  my print spooler services do not start. Any help appreciated.

  Hi Paul,.

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with the Printer Spooler service and receive the code error 1053.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest to run the printer Troubleshooter and check if the problem persists.

   

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also see the following article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: You can try running the following commands and check if the problem occurs and also to see if the printer comes back online after

  a. click the Start button, and type cmd in the box start search

  b. right click on cmd in the list programs and select run as administrator

  If you are prompted for an administrator password or a confirmation, type your password or click continue

  c. at the command prompt, type the following commands and press ENTER after each one

  net stop spooler

  and then

  net start spooler

  This will stop and restart the print spooler service. If this solves the problem of the printer is offline, please let us know.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

• the Windows spooler service error

  I am trying to reinstall the printer software, but keep getting windows critical error spooler service does not start. How to cure the problem

  Note: "the title of this post was published to help other customers to easily find this topic in their search results."

  Hi Phil,

  Thanks for posting this question in the Microsoft Community Forums.

  From you description of the problem, I see that the Windows print spooler service is stopped.

  Let us work together to start the print spooler service.

  However, before we start, we need more information to better understand this issue. Please answer these questions.

  1. What is the exact error message that you receive?

  2. which version of the Windows operating system is installed on the computer?

  3. What is the brand and model of the printer?

  4. when exactly you receive the error message?

  5. don't you make changes to the computer before this problem?

  Let us try to start the Windows Print Spooler Service:

  To do this, follow these steps:

  a. on the desktop, press the Windows key + R to open the dialog box run.

  b. type services.msc (in the search bar) and press enter.

  c. scroll down the Services window and right-click on print spooler.

  d. Select Properties.

  e. in the general tab, click Start and make sure that the Startup Type is Automatic.

  f. click apply and OK.

  This will start the print spooler service.

  Now, try to reinstall the printer software and check if it works.

  Please get back to us with the results and more information on the issue.

   

  If you have questions about Windows operating systems, write to us, at any time. We are happy to help you.

• LaserJet 1022n printer (spooler Services) question

  Whenever I try to print, I get an error message that the spooler sirvice does not work. I use the troubleshooting to fix the spooler, but he won't stay fixed. My print screen won't let me choose the printer, it's a LaserJet 1022n.

  Can you please try the following:

  (1) Press Win + r (run the window will open)

  (2) type "services.msc" and press ENTER.

  (3) in the window that opens, locate the "Print spooler" service

  (4) make a right click on the "Print spooler" service and select 'Start Service'.

  If the spooler service was stopped, then this should help solve the problem.

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• the print spooler service may not be running

  Hello

  I have 4 computers around here, and I'm trying to get a printserver running on one of them, so we have installed windows 2008, set up as a server to printing etc..
  Now when I try to add the printer to my computer laptop windows 7, it works perfectly, and is the same for one of the windows xp workstations.
  However, when I try to add the printserver on windows server 2003, it starts talking about missing drivers.

  The printer is a HP LJCP3505 PCL6, and he is already working on a normal (eg. non-printserver associated) network.
  I downloaded almost all the drivers, I could find from the HP website, but whenever I try to add them, it tells me that they are not valid drivers.
  and on another computer windows 7, I get the following error message:

  Could not connect to the printer.
  On the server print spooler service could not be executed.
  Restart the spooler or restart the server

  (on a side note: it's a translated error message, our systems are not English)

  I don't know if they are related, but I checked the print spooler service, and it was fine (auto startup, active etc.).
  the same goes for its dependencies.

  Hi LeanderML,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in Technet Windows Server.

• Windows 2003 terminal server print spooler service stops frequently

  Windows 2003 terminal server print spooler service stops frequently

  Hello Vijay Bedre,

  Thanks for your post.  Please ask your question in the forum of Remote Desktop Services TechNet as they manage all the server related issues.

  See you soon

• Printer installation tries to install e-printer on a netbook... don't get a message on the spooler service. What is the spooler service?

  Try to install e-printer on a netbook... don't get a message on the spooler service.  What is the spooler service?

  Hi Pat,

  Spooler service manages print jobs by saving in a queue and submit them to the printer in order specified instead of sending them directly (which can cause the printer back up if too is sent at a time depending on how printing is setup and the printer works).

  Try the simple fix to see if it works.  Go to start / Control Panel / Administrative Tools / Services and place you on print spooler and double-click it.  Click the Dependencies tab, go to all the services listed there and confirm that they are automatic and started.  If this is not the case, change it to automatic, and then restart them.  Once finished, return to the print spooler and set it to automatic and start it.  Click OK and close out Services and control panel and restart.  When you come back, come back to Services and check that the print spooler again told automatic and started.  If this isn't the case, after back and let's check other things.  If so, proceed to the installation of the printer, and this particular problem should no longer be a problem.

  I hope this helps.

  Good luck!

• Error 1053 When starting the spooler service. Windows Update is replace a file k 43 spoolsv.exe (453ko)

  Windows spooler service works well until Windows Update replaces the spoolsv.exe file.

  Hello

  Check this link http://social.answers.microsoft.com/Forums/en-GB/w7hardware/thread/b2b3899d-3615-4d26-8298-15841b29ec08

• Print Spooler service

  Hi when I try to print to a printer network, the error message that comes is "the print spooler service does not.

  I tried run services.msc and reformulating the spooler but its still does not work, what should I do?

  Hello

  Restart the computer and make sure that the print spooler is started.

  What printer you are using?