Sport band size 360, joint of wrist

Similar Questions

• What a bunch of choose what wrist size is > 220 mm

  The size of my wrist is a little more then 220 millimeters.

  I would buy 2 Watch with nylon band. Don't you think that it fits?

  Tips that will strip to adapt?

  3 options of party?

  Tanks,

  Martin

  Hello

  The band woven nylon for the wrists of 145-215mm 42mm Apple Watch fits.

  When buying as a separate accessory, white or black sports group is available with a L/XL configuration, which corresponds to the wrists of 160-245 mm.

  Bracelet link kits are also available with six additional stainless steel links, which can be used to extend relationship Bracelets for wrists sticking out of 205mm.

  More information:

  http://www.Apple.com/shop/watch/bands

• The sport is now a special edition watch with band marine?

  I have a sports watch 42mm provided with stripes Navy Blue Gold. I noticed that this is one of the only models with a pine of gold on the strap. Is it a specific edition?

  Hello

  Your watch is one of the latest configurations of watch case colors and strips.

  Internal hardware and features are the same as the other models Apple Watch Sport.

  More information:

  http://www.Apple.com/shop/buy-Watch/Apple-watch-sport/42mm-gold-aluminum-case-wi th-Midnight-blue-sport-band? product = MLC72LL/A & step = detail #.

  http://www.Apple.com/shop/buy-Watch/Apple-watch-sport

• new band compatibility?

  Classic loop Brown saddle is compatible with the case (42 mm) aluminum?

  Thank you

  Hello

  Any band of Apple Watch 38 mm or 42mm fits any model of Apple Watch of the same size of the case.

  Non-Sport bands have different lengths, then check the circumference of your wrist and see Apple Watch Sizing Guide (that compares all the Apple strips) before you buy separate bands:

  http://www.Apple.com/shop/watch/Sizing-Guide

  The Sport of Apple Watch also has an anodized aluminum housing, while the non-sport bands have different metals of cards and/or links (this does not affect the compatibility, only appearance).

  Information on how to pass the tapes: change your Apple Watch band - Apple Support

• Band of Milanese

  I bought a Milanese band but my wrist is bigger and I need to add an Extender.  I'm looking for an appropriate extendere.

  Purchased a 38mm or 42mm? Band sizes are not the same and the largest group, because the 38mm is for wrists of up to 180 mm and 42mm returns to the wrists of 200mm. There is no extension for the bracelet. If you have a hand better than the band size, you will need to return the watch, or get a different band.

• Hi I have a new Apple Watch - sport Strip. Is it possible to buy separately strips that can be used with the watch?

  Hi I got a new Apple Watch as a gift at Christmas - sport band, white, 42 mm. 7000 series. Since this is my first Apple Watch, I wonder if I should check all options at the store before opening the box. Is it possible to buy separately strips that can be used with the watch?  Thank you, in advance, for any advice, guidance, you can offer the wisdom.

  Hi, Kate

  Yes - any band Apple Watch 42 mm fits your Apple Watch.

  Non-Sport bands have different lengths, then check the circumference of your wrist and see Apple Watch Sizing Guide (that compares all the Apple strips) before you buy separate bands:

  http://www.Apple.com/shop/watch/Sizing-Guide

  Try them in an Apple Store, it's also a great option.

  The Sport of Apple Watch also has an anodized aluminum housing, while the non-sport bands have different metals of cards and/or links (this does not affect the compatibility, only appearance).

  Information on how to pass the tapes: change your Apple Watch band - Apple Support

• Watch the band material

  I recently ordered a sport Watch Gold and another in pink.

  I would get another sport and strips woven in the future.

  Is it possible to get these bands with loops and PIN to match the watch cases?

  Hello

  At the present time, when you buy woven Nylon and Sport strips separately as an accessory, the only group that offers a colorful PIN or loop is the black sports band (which is available with a black space pine).

  http://www.Apple.com/shop/watch/bands

  If you want Apple to consider offering more bands - like accessories - with loops of color and pine, you can submit your comments here:

  https://www.Apple.com/feedback/watch.html

• Apple nylon watch band

  I got a 38mm watch Sport by Apple as a gift.  I went to the Apple local store yesterday and asked to see the bands nylon.  They showed me a tape that was Gold/Red in color with a gold buckle (my watch is aluminum gold).  I wanted to buy this watch band and I was informed that that particular color Strip and the loop are only available at the time purchased (the watch).  The band of gold/red which is available in store and online has a silver ring.

  I don't understand why this band cannot be purchased after the fact.  If you have the opportunity to buy a watch with this band of color, why this band can be purchased at a later date?    As I mentioned previously, this watch is a gift so I could buy a particular band.

  Hello

  Combinations of case and the watch band that exist together as an initial purchase are not necessarily completed by bands available separately (IE if purchased as a separate accessory).

  The same principle applies to the colours of PIN for Apple Watch Sport bands.

  If you want to suggest that Apple consider adding other bands of Nylon woven with loops of different colors, you can do it here:

  https://www.Apple.com/feedback/watch.html

• What is the difference between Apple Watch sport and Apple Watch?

  What is the difference between Apple Watch Sport42mm space aluminum case gray with Strip black sports and Apple Watch 42 mm space with black Sport band black steel box?

  Hi Mathias

  There is no difference in the features of the software or the specifications of internal material between the Apple Watch models (with the exception of a few faces of exclusive watch on Apple Watch Hermès).

  The only differences are the materials used - including watch boxes, tapes, and views.

  For example: Apple Watch Sport models are designed to be as light as possible, using aluminum and glass aluminosilicate for the screen. Apple Watch models use heavy stainless steel case and sapphire glass for the screen.

  Your best option may be to make an appointment to try on Apple Watch in an Apple Store, see and feel the difference.

  More information:

  Try on Apple Watch - make an appointment

  http://www.Apple.com/watch/design/

• Best Stripe Size for virtual machines

  Hello

  I'm deployment ESXI on my server HP Gen 9 DL360P with RAID 1 for the OS (ESXI) and RAID 6 for the data store. When creating RAID, I came to the top of the screen where we can customize the size of distribution / Stripe size, sectors / track, size etc. I would like to know if there is no Vmware recommended best practices for the selection of these?

  Currently I just use the default that HP ships with.

  Help, please

  

  I'm afraid that there is no 'best band size' for VM-store data. All depends on the usage scenario (many small files or big files? ratio reads/writes?, etc..). There are some other values, you should consider:

  -disk sector size: 512 b, 4 KB (can be variable for sas drives)

  -main file system block size: for vmfs5 is 1 MB (with subblock 8 KB)

  -size of the block of secondary filesystem (that of VMs): depends on the file system used (i.e. btrfs has default blocksize 16 k, 4 KB ntfs, etc.)

  -ssd erase block size: this is different with the suppliers, mainly of 4MB, but I have seen values between 1 MB and 8 MB

  -size of the cache of your raid controller (can be anything between zero and a few GB)

  If you have no time to test, simply choose default value offers of raid controller. If that's what screenshot shows, I think it's by default pretty good choice and it seems logical to me (full band-size is equal to the size of block vmfs5, 1 MB). It makes no sense to pass under this value, but I it would increase if you store large files especially...

• How to change the format of VOB file without loss of quality and file size of balloon?

  I try to save a VOB file on a problematic DVD using first Pro CC 2015. Can anyone help me please with selecting the best export settings?

  My goal is to maintain the quality and size of the file as close to the original as possible. I just need to change the file format to something I can easily view on my computer. Sometimes, he tries to simply change the extension from VOB to MPEG, but in this case, I edited (shortened) the original file so need to save again.

  Most of the output options I tried drastically reduce quality or seriously enlarge the size of output file.

  First gives me the following information from the source:

  Type: MPEG Movie

  File size: 675,20 MB

  Image size: 360 x 288

  Frame rate: 25.00

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total time: 00:59:22:02

  Format of the pixels: 1.0940

  AVI, quality 100 gives a file size of 12 GB. Source H.264 match - high bitrate gives a file size of 2 GB. Where does all that extra data?

  Match sequence settings should be an obvious solution, but it gives me a slightly larger file (706,98 MB) with a sharp drop in quality.

  If I select H.264, corresponds to the size of the original image and approach the source of all other settings as I can, the size of the resulting file is still much greater than if I drop the transmission speed. However, first does not show me bitrate of the source until I put it to maintain the same quality?

  I want just the same file in a different format so that I can view them easily. Simple yet I have not been able to find a solution. Can someone point me in the right direction?

  Thank you very much, Berne

  You can not avoid re-encoding. His first mpeg will not give you made smart on mpeg.

  You need a different program if al you want to do is trim down.

  Best Software MPEG video editor | TMPGEnc MPEG Converter Smart 4

  Match sequence settings does exactly what it says. Your sequence (each) works with a codec to preview.

• Reduce the size/resolution of the image but will then return to the former size when click ok

  Hello

  Hope this finds you well.

  I'm trying to reduce the size of an image to get the height according to a specific size (360 px) because it's the height of the container it will sit on the web.

  I learned to:

  -go to image/image size

  -Be sure to re - sample image is disabled

  -change the units of the size of the document to points

  -Enter the new height

  -then check out re - sample image

  -Enter the final resolution to 72 (it was 183 front)

  -Uncheck resample image and click ok

  I followed these instructions and except for once (which I can't do redo) the image will return to its original size after the last step to uncheck image re-snack.

  No idea as to what could happen and how can I solve it?

  I appreciate your time and look forward to hearing back from you soon.

  Thank you!

  You don't need to keep check / uncheck resample image.

  Leave resample image checked and enter the size in pixels in the pixel Dimensions section. Enter the resolution box - which should be 72.

• Size of allocation for scratch disk array

  I am building a workstation CS5/64 works on Win 7/64 that will be used to edit images from 1 to 4 GB. The "scratch disks" will consist of a RAID 0 array using WD600Gb of 3-4 disks of 10 K on a map of the Areca shortstroked.
  What is the best band size for a 3-4 record for large images? Adobe publishes how they R/W for scratch disk, block size, etc?

  Larry

  Usually data written Photoshop scratch in the size of the tiles in the image (as seen in the preferences).

  To save the files, we write big buffers, and the buffer size may vary according to the format options and compression.

  In addition, it is not really a model.

  And the best settings for your table will much depend on the controller and the drives used.

• Apple Watch Group compatibility

  Hello world

  I have a Apple Watch Sport 38mm (1st gen). I was about to buy series 2 Apple Watch soon and I was wondering if my old Apple Watch Sport bands would be compatible with my new Apple Watch series 2? If anyone can let me know I would appreciate it a lot.

  Hello

  Yes, they would.

  All strips of Apple Watch, past and present, will be to adapt any Apple Watch of the same size of the case (42mm or 38 mm).

  To clarify, series 1 does not refer to your existing, first generation watch. He referred to a new Apple Watch model that has the same characteristics as the original Apple Watch, with the exception of a new dual-core processor.

• Fake H710p PERC? -Firmware upgrade error

  Hallo,

  I recently bought a DELL PERC's H710p to the address but I can't update the firmware or install the driver. I always get an error like:
  "No controllers present or detected."

  First I thought that this is because the PERC H710p is not supported on a DELL R710 server. But after some research, I found something weird.

  The reason why the update of the firmware fails is simply the fact, that the "SUBDEV = 1f38" required when updating cannot be fond. My 'H710p' has a different SUBDEV. His SUBDEV is 1f77. So my question is, I bought some controller "false"?

  If this is not a 'fake' controller, what should I do to update my H710p and how to install the drivers?

  Thank you

  Here is the log from Megafl:

  Card #0

  ==============================================================================
  Versions
  ================
  Product name: adapter PERC H710P
  Serial number : xxxxx - Im not sure if its save to publish a sn on the internet. But if a job DELL need to check the controller, please send me a PM.
  FW Package Build: 21.0.2 - 0002

  Data from MFG.
  ================
  MFG Date: 01/04/13
  Transfer date: 01/04/13
  Revision no.: A00
  Battery FRU: n/a

  Version of the image in Flash:
  ================
  BIOS version: 5.30.00_4.12.05.00_0x05110000
  CTRL-R Version: 4.00 - 0014
  Pre-launch CLI version: 05.00 - 03: # 00008%
  FW version: 3.130.05 - 1587
  NVDATA Version: 2.1108.03 - 0093
  Boot block version: 2.03.00.00 - 0003
  STARTING version: 06.253.57.219

  Images pending in Flash
  ================
  None

  PCI Info
  ================
  Provider code: 1000
  Device ID: 005
  SubVendorId: 1028
  SubDeviceId: 1f77

  Host interface: PCIE

  Frontend Port number: 0
  The Device Interface: PCIE

  Backend Port number: 8
  Port: address
  0 4433221102000000
  1 4433221103000000
  2 0000000000000000
  3 0000000000000000
  4 0000000000000000
  5 0000000000000000
  6 0000000000000000
  7 0000000000000000

  HW configuration
  ================
  SAS address: 590b11c04b521300
  BBU: present
  Alarm: Absent
  NVRAM: present
  Debugger series: present
  Memory: present
  Flash: present
  Memory size: 1024MB
  TPM: Absent
  On board the Extender: Absent
  Key update: Absent
  Sensor of temperature for ROC: present
  For controller temperature sensor: present

  ROCK temperature: 57 degrees Celcius
  Temperature controller: 57 degrees Celcius

  Parameters
  ================
  Current time: 20:28:33 9/4, 2013
  Predictive failure polling interval: 300sec
  Interrupt the active gas number: 16
  Interrupt the completion of the throttle: 50us
  Regeneration rate: 30%
  PR rate: 30%
  BGI rate: 30%
  Consistency check rate: 30%
  Rebuild rate: 30%
  Cache flush interval: 4 s
  Max led to spin-up at the same time: 4
  Between groups of spin-up time: 12s
  Coercion of physical training mode: 128 MB
  Cluster mode: disabled
  Alarm: disabled
  Auto regeneration: enabled
  Battery warning: enabled
  ECC bucket size: 15
  ECC bucket leak rate: 1,440 Minutes
  Restore the hot spare to the Insertion: disabled
  Exposing pregnant devices: disabled
  Keep the history of the PD Fail: disabled
  Reorganization of host application: enabled
  Auto Detect Enabled BackPlane: SGPIO/i2c MS
  Load balancing mode: automatic
  Use only the FDE: Yes
  Security assigned key: No.
  Security key failed: No.
  Not saved security key: No.
  Default policy LD PowerSave: controller set
  Maximum number of disks to connect direct to the top at 01:00
  Any Cache offline VD kept: No.
  Allow booting with preserved Cache: No.
  Disable controller Reset online: No.
  KFC in NVRAM: No.
  Use the disk activity to locate: No.

  Capacity of
  ================
  RAID levels supported: RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, 11 with covering PRL, layout of PRL11-RLQ0 DDF with no span, DDF PRL11-RLQ0 available with span
  Supported disc: SAS, SATA

  Permit mixture:

  Mix allowed attachment

  Status
  ================
  ECC Bucket Count: 0

  Limits
  ================
  Max of weapons by VD: 32
  Max extends by VD: 8
  Max tables: 128
  Maximum VDs: 64
  Max parallel orders: 1008
  County EMS max: 60
  Max Data transfer size: 8192 sectors
  Max band PerIO: 42
  Band of min size: 64 KB
  Max band dimensions: 1. 0 MB
  CacheCade varied size: 512 GB
  Current size of CacheCade: 0 GB
  The current size of the Cache FW: 887 MB

  Current device
  ================
  Virtual drives: 1
  Gradient: 0
  Offline: 0
  Physical devices: 2
  Disks: 2
  Critical records: 0
  Has no records: 0

  Card operations support
  ================
  Rebuild rates: Yes
  Rate of CC: Yes
  BGI rate: Yes
  Rebuild rates: Yes
  Patrol read rate: Yes
  Alarm control: Yes
  Cluster support: No.
  BBU                             : No
  Spanning: Yes
  Dedicated backup: Yes
  Reversible spare discs: Yes
  Foreign Config import: Yes
  Auto diagnosis: Yes
  Allow the joint redundancy on table: No.
  World Relief: Yes
  Deny SCSI Passthrough: No.
  Reject the SMP Passthrough: No.
  Deny STP Passthrough: No.
  Security: Yes
  Snapshot enabled: No.
  Support ECO without adding drives: Yes
  Support the KFC: No.

  Operations supported VD
  ================
  Read the policy: Yes
  Write policy: Yes
  IO policy: Yes
  Access policy: Yes
  The strategy of Disk Cache: Yes
  Reconstruction: Yes
  Deny locate: No.
  Reject the CC: No.
  Allow encryption Ctrl: No.
  Turn on LDBBM: Yes
  Breakmirror support: Yes
  Energy savings: Yes

  PD supported operations
  ================
  Force online: Yes
  Force offline: Yes
  Rebuild the force: Yes
  Deny the Force failed: No.
  Deny the good/bad Force: No.
  Refuse to replace missing: No.
  Deny Clear: Yes
  Deny locate: No.
  Support temperature: Yes
  Disable the Copyback functionality: No.
  Enable JBOD: No.
  Enable the feature Copyback on CHIP: No.
  Activate Copyback of SSD on SMART error: No.
  Select SSD read: No.
  PR Correct unconfigured areas: Yes
  Enable Spin Down of unconfigured disks: No.
  Turn off the Spin Down of the hot spare function: Yes
  Spin-Down time: 30
  T10 power state: Yes
  Errors counters
  ================
  Memory correctable: 0
  Mistakes not rectifiable memory: 0

  Cluster information
  ================
  Authorized cluster: no
  Cluster Active: No.

  Default settings
  ================
  PHY polarity: 0
  PHY PolaritySplit: 0
  Base rate: 30
  Band size: 64 KB
  Hunting time: 4 seconds
  Write policy: WB
  Read the policy: Adaptive
  Be cached when BBU Bad: disabled
  IO caching: No.
  SMART mode: Mode 6
  Turn off the alarm: No.
  Mode of coercion: 128 MB
  ZCR Config: unknown
  Dirty disk activity LED Watch: No.
  BIOS continue on error: No.
  Spin-Down Mode: no
  Authorized device type: SAS/SATA Mix
  Allow Mix attachment: Yes
  Allow to Mix SAS/SATA HDD to VD: No.
  Allow Mix SAS/SATA SSD in VD: No.
  Allow Mix HDD/SSD in VD: No.
  Enable SATA in Cluster: No.
  Chained Max speakers: 4
  Disable Ctrl-R: No.
  Enable Web BIOS: No.
  Direct Mapping PD: Yes
  BIOS enumerate VDs: Yes
  Restore the hot spare integration: No.
  Exposing pregnant devices: No.
  Keep the history of the PD Fail: No.
  Disable any perforation: No.
  Zero based speaker enumeration: Yes
  PreBoot CLI enabled: no
  Disk activity see the LED: Yes
  Disable cluster: Yes
  Disable SAS: No.
  Auto Detect Enable BackPlane: SGPIO/i2c MS
  Use only the FDE: Yes
  Led enable header: No.
  Delay during the POST: 0
  EnableCrashDump: No.
  Disable controller Reset online: No.
  EnableLDBBM: Yes
  Uncertified hard disk drives: enable
  Treat simple span R1E as R10: Yes
  LD max by the Bay: 16
  Energy saving option: don't turn down the readers not configured
  Don't turn down hot spares
  Do not Auto centrifuge configured Drives
  Power settings apply to all readers - cannot set the individual parameters of power PD/LD
  Max power savings option is not allowed for LDs. supply Conditions only T10 should be used.
  Written in cache is not used for queue down VDs
  Annex can disable save energy at the level of the controller
  By default the spin time in minutes: 30
  Enable JBOD: No.
  Journal of the ATS in Flash: no
  Auto improved Import: No.
  BreakMirror RAID support: Yes
  Disable the join mirror: Yes
  Time required to detect the CME: 60 s

  Exit code: 0x00

  Controllers H710 series have been tested and validated in the Dell only 12 servers (such as the PE 720) generation.   Further, check your H710p came from a Precision Workstation.  The following valid this information, which came from the file nocheck.bat for this controller:

  OFF @Echo
  CLS

  put the FW = 21.0.2 - 0002
  Set ROM = H710PAWS.rom
  SUBDEV = 1f77 set
  DOS32A = set / AC /NOWARN:9004

   
  You will need this patch: http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=CGM2K which is the latest available for this particular controller.

  The controller may or may not work in your PE710, it just has not been tested or validated.  Good luck!

  Kind regards