Spot-clone stopped work removal tool-

Similar Questions

• LR: My spotting brush stop working.  Ideas on how to solve this problem?

  Looks like it should work, but the tasks are not actually replaced by replace the spot.  Looks like just before I used the brush of spotting.

  Hello

  We would need some information on your side:

  • What version of Lightroom do you use?
  • Stain brush opacity is set to 100?
  • If possible, share a screenshot of your Lightroom window with the settings of the brush.

  Kind regards

  Claes

• Spot Removal tool works not, marquee offset box

  Hello

  When I select a clone or heal area, using the spot removal tool something strange happens.

  This is what is happening. I draw an area to heal, after this the white tent appears, but not around the area, I drew. The marquee is offset about 2 centimetres under the box that I drew. If the task is not covered, and noting happens. Am I doing something wrong here, can you please help me?

  

  Version of Lightroom: CC 2015.6 [1078672]

  License: Creative Cloud

  Operating system: Mac OS 10

  Version: 10.11 [5]

  Application architecture: x 64

  Check this on the same version at our end and it does not work as expected.

  Please reset the Clone Brush settings and try again.

  ~ Assani

• the spot removal tool does not work

  Hello

  I am a new user of Lightroom 5 and everything goes smoothly apart from what happened this morning.

  When you're under the Spot Removal Tool-, you have the Clone and heal options mode. They used to work perfectly until yesterday and today when I click on one of them that I go to the photo would report - to develop, he painted a white mark and when fined you it does nothing.

  It allows to create a circle that you can move to select the texture and color that suits you. Now, this no longer appears. I must have pressed a button on the keyboard that caused this!

  I tried to reset everything from this morning and nothing works... Please let me know how to solve this problem.

  Much appreciated in advance... I will provide more details if necessary.

  Concerning

  Anthony

  Looks like more of an issue.

  To display the area of the source you want healing to come again, try pressing 'H', while the heal tool is selected.  You may need to press it several times.

  If no healing does occur it sounds like you may have the opacity on the too, right tunred down.  Increase the opacity to 100 slider... or to whatever setting find you works.

• Windows Defender stop working after the malicious software removal tool

  I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If the problem persists, please after return.

• Option-click on the Photoshop CS5 Clone Stamp tool just stopped working why?

  I am using clone stamp tool option and click on Photoshop CS5 on my Mac 10.6.5 and it stopped working suddenly on Monday.  He had just used Sunday.  So, I tried to isolate the problem.

  1. at the Apple store and my work as a keyboard and mouse is well spent on their internal systems running Photosochop CS5.  Problem still exists on the system at home.

  2 adobe photoshop suggested I go back to Mac 10.6.3.  I did and the problem still exists.

  3 reset all settings predefined in CS5.  Problem still exists.

  4. has spent several hours with Adobe Photoshop tech on phone - he could not operate it remotely either.  RELOADED Photoshop from scratch.  Problem still exists.

  Question:

  This could be a hardware problem?  Graphics card problem?

  Or is it a software outside of CS5 and Mac OS problem?

  Thank you - HelpMeJoan

  Hello Joan.

  This forum is to feature on Photoshop.com site requests. Using issues such as you are experiencing, please post your request here:

  http://forums.Adobe.com/community/Photoshop/photoshop_macintosh

  -Brett

• computer starts but nothing works. OneCare has been stopped, restart, no network connection found, office does not work. Analysis now with the malicious software removal tool, but nothing happens.

  OneCare was 'arrested' will not restart
  Wireless networks - does not and cannot correct
  No program will run if I'm in safe mode
  I did a virus scan with the malicious software removal tool, nothing was found.
  I write this on my netbook - I can't have my laptop online.
  I have no idea what to try next.  I need my laptop!  Help, please

  Hello laughingpaws,

  To help resolve this issue, use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• removal tool to the spot on the edge of the merged panorama

  Using LR6 to create a merged file DNG several jpgs that were shot in my Pocket I took the resulting DNG cropped and enlarge the area to harvest a bit there are white areas at the top and bottom of the photo (exact original photos match, and I want to include all original parts). Trying to fill the empty spaces by using the Spot removal tool. It works as expected inside the photo, but if the target box contains one of the pristine area, do not 'copy' of the source pixels. It stops exactly at the edge of the original photos and refuses to pay in the empty area of the photo have merged. Workaround was to export/import a JPG file and edit this file. Anyone else see this behavior? Seems like a bug to me.

  Without getting into the semantics of "bug", LR behaves as expected by its developers.  But a number of people have requested the opportunity to fill the edges with the tool clone, and Eric Chan (senior developer of Adobe) says:

  We will investigate how to improve this in the future, but for now the best solution is to 'fill' the edges using Photoshop, or "round-trip" the image in Lightroom.

  "Round trip", it means export TIFF or JPEG image and then re-import.

  Please add your vote and opinion on this in the Adobe official feedback forum: Lightroom 6: Clone Brush ineffective on the white edges of the Panorama.

• Spot remover tool will not remove all stains of dirt is possible this tool can be accidentally turned off?

  Spot remover tool will not remove all stains of dirt is possible this tool can be accidentally turned off?

  It is not clear to me if you understand how this tool works. It does not automatically remove tasks, you must open the tool and click the points you want to delete. To Heal I usually put 100% opacity for Clone usually not more than 90%.

• Lightroom 5 Spot Removal Tool lag and is not usable (Temp workaround?)

  Lightroom 5 Spot Removal Tool lag and is not usable.  The Spot removal tool is really quite critical to usability and workflow for Lightroom 5.  Check the other tools beside the Spot removal tool, it seems that the fix red eye tool is also affected.  It might have something to do with the Version of process?  I noticed when working with some old images (using the 2010 process Version) files, the Spot removal tool worked as previously experienced. Current images that have been "upgraded" in the new Version of process (2012) are now unable to use the place because of its response removal tool very laggy and sporadic.  I've never known a problem like this with Lightroom (LR since LR2 user).  Mac OSX 10.7.5, i7 to 3.4 GHz, 8 GB 1333 MHz DDR3

  I also noticed this reprocessing that an image can return to the removal tool again 'useful' Spot (back from 2012 to 2010, then return in 2012).  Does not always work and isn't always 'stick', such as closing and reopenling LR reinitiates usually lag Spot Removal Tool.

  I saw someone talking about the Version of process as a potential culprit, nor I have seen no reliable workaround solution.  An image (or a set of images) reprocessing at least works for me for a while, but it would be nice to not have continue reprocessing of images every time I open / use Lightroom 5.

  LR5 is great and all I need for most of my images.  Unfortunately for me, however, this ease of use also requires features without hindrance of the Spot removal tool.

  For some reason, it is clear that not everyone is experiencing such massive slow / bottleneck when it comes to the Spot removal tool.  If all users have experienced this problem at this level, they would have been calling for Adobe to address and remedy immediately.

  Respectfully, Sean, make a suggestion like that proves that you do not know / have not experienced this problem / don't understand gravity on which this issue may affect workflows; simply "turn off lens correction and noise reduction" is certainly not a fix.  If the 16 GB of RAM does not resolve the problem, you really think simply turning off the noise reduction will be?  And as Bert Nase pointed out, to make that large volumes of images increases workflow in a program designed to streamline the workflow for large volumes of images.

  1 - one solution is to change the version of process in your first picture (2003-2010), then copy - paste who develop the setting for the rest of your images.  This will get all your images at the point in your workflow where you can use the tool to delete Spot on each image.  After spotting, convert each image back to the current version of the process (2012) then re - perform tasks that conversion lost.

  2 - The presets is a workaround of options, but you will need at least two of them adapted to your stream of work.

  3. change your import settings to an earlier Version of the process is an option, and then complete Spot Removal on each photo, then update the process Version on one and copy/paste for the rest, then re - perform for each picture lost during conversion tasks and continue your workflow from there.

  Readers of this thread can use the link above, but it may present its own problems, too.  As mentioned, switching back-and-forth between Versions of process can remove some of your spots already corrected and you will need to re - correct.  Worse, a prompt window asking for the creation of a virtual copy or evidence will begin sometimes arise... closing the window, by clicking 'Cancel' or by choosing another option in the context menu didn't "remember" and the window opens upward with any other "click" on the image.  Lightroom should be stopped and the computer restarted before the question to reset.

  Yes, it's very frustrating and time consuming to say the least.  So, unfortunately there no solution yet to workaround.  I hope that this issue will be addressed and corrected in the next release of 5.2 (doubtful) or the Cloud of Photoshop + Lightroom version.

• LR 5 questions with the help of sorting and spot removal tool

  LR 5...  Same problems with the sorting, WinX 64... crashes.  Delay of about 5 seconds to select a thumbnail, if I click on one and it lag I can fly over another and he will choose the other.  He refuses to move files selected at least 3 attempts.  However, it doesn't seem to work better work out thumbnails of Strip below.  When it starts acting up a restart does not help.  Also there is a huge gap and the jumpy mouse pointer when you use the removal tool / clone spot.

  I only LR open so the computer overload is not the issue.  I Suite OnOne 7 also and ANDLr, also many other programs open and this program works perfectly.
  I have not had any problems with the LR 4 but LR 5 is a great advertisement of NOT getting a new version until the bugs are removed.  It drives me crazy, so go back to LR 4.  The tools in LR 5 but not the accidents of love.

  These are the few that I've met so am not treats using the version 5 There is no update as of July 18, 2013 so any suggestions using LR 4 or go for a long walk until these issues are addressed?  I'm annoyed say the least to upgrade and then get grounded when I have a load of work that is time based!

  Fred

  Have you seen this? http://helpx.Adobe.com/Lightroom/KB/Lightroom-5-crashes-editing-images.html

• -Why my Dodge CS2 tool did stop working as game?

  CS2 dodge tool stopped working together, still Burn, sponge, Clone of all work tools; Dodge tool leaves centered white spots if clicked several times. all my CS1 tools work; tool settings all my CS2 and CS1 are same (0 hardness, the exhibition of 20%), restart doesn't correct; can anyone help?  Is it possible to create this problem in typing accidentally shift, Alt, or Ctrl ', 'or'. ' or similar, all using the Dodge CS2 tool?  Thanks in advance!

  It's probably something to do with the Brush tool. If choosing a brush "Preset" (not just a tip of the brush) is not set then reset the Dodge tool. Right click on the tool icon to the left of the Toolbar Options and choice tool of reset.

• Can anyone help? My spot healing Bush has stopped working

  I used CS4 for over a year with no problems

  The spot Healing Brush tool (which I use a lot to remove the XY scatter on u/w photo) sometiems acted strangely on occasion (healing in the wrong place, causing a change in line across the image), but with the story that I could come back and do it again.

  However it has now stopped working (or if she don't fainly so do not have effect)

  I reinstalled CS4 and all updates but this spot corrector does not always work and install it on the laptop and used the same settinmgs (where he works)

  Has anyone else had this, and even better had someone else has solved?

  Try to reset the tool from the drop (as in this example for the text tool).

  

• KB890830 Windows Malicious Software Removal Tool - v3.21 arrives at c:windows\system32\EhstorShell.dll and stops (gel).

  I try to run the version of July of the software removal tool KB890830 windows malware - v3.21 and gets c:windows\system32\EhstorShell.dll and stops (gel).  Is malware or virus?  The computer says I need permission to remove and will not delete what I can do?

  Hello

  Try the methods and check if that helps

  Method 1:

  Firstly uninstall the malicious Update Removal Tool KB890830 completely from your computer. To uninstall the update follow the link below.

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  
  Method 2:

  Once you have uninstalled the update do Windows Update (with the exception mentioned) to your computer and check if the updates with the exception of the above mentioned are installed and applied without any problem.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  
  Method 3:

  Restart the computer after installing the updates and check if the computer works fine. Now install the malicious Removal Tool KB890830 update and what's happening. Try to install the stand-alone package for the same thing. Follow the link to download the standalone pack for the same thing.

• Shift-click with the spot removal tool does not remove the straight lines

  Hello, I am after a tutorial on Lynda.com, which demonstrates the use of the spot removal tool to remove a task from a straight line.  Click on one of the ends of the line, hold the SHIFT key and click on the other end of the line.  Pouf!  Nothing happens.  The technique works very well for me in Photoshop.

  I have a PC with Windows 7 Pro 64 bit and Lightroom CC 2015.6.1, Camera Raw 9.6.

  In fact he worked sporadically on the image of a practical, but hot in a reliable way and does not at all in all the other images that I try.    Advice will be greatly appreciated.

  Thanks - Dave

  The technique is

  Hold the SHIFT key FIRST, then click and drag horizontal or vertical.