SQL 2008 R2 SBS install on the exchange server or it's own dedicated server?

Similar Questions

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx

• Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Hello

  Our company uses an Exchange Server for email, contacts and calendar.

  Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Kind regards

  Matej

  You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.

• BlackBerry blackBerry 10 does not receive the emails from the exchange server

  Hello

  We have the problem that peripheral Blackberry doesn't synchronize with the server exchange since last week. This is valid for two (classic / Z30) among the four devices, the other ones (classic / Z10) are functioning normally. All have the 10.3.2.2474 version.

  I rebooted the unit and removed and rebuilt the e-mail account on the BB, but it doesn't help. Account settings are ok (no messages during installation). The device connects to the exchange server (for example, I can see the account's e-mail records in the options) and I can also send mails. But I don't get e-mails, calendar items, contacts, etc.

  Any ideas?

  Thank you

  Axel

  Hello

  I'm not 100% sure, but I think that there is a restart due to the update of the BONE last week. I don't know if this has coincided with the problem.

  I reloaded the OS yesterday via the LINK. It seemed to me that does not solve the problem because I have not yet received mail for a while. However, this morning the mails were back.

• Monitoring/recording of CAD installed on the Terminal Server

  Hi all!

  We have IPCCX installed 4.0 with CCM 4.2 and CAD installed on the Terminal Server. Journal of agents in 7940 phones using the mobility of the Extension, then using Remote desktop connectin they connect in CAD. Everything works perfectly fine.

  Supervisor Desktop is installed on a separate machine, and it works well for intercept/Barge in. However, when we try to monitoring/recording a call no audio is recorded. Has nothing to do with the fact that "Agent PC must be plugged beeing monitored IP phone" as stated in manuals?

  Does anyone have an idea how to remedy this situation and be able to watch/record?

  Just to note: we have two NETWORK adapter installed on the CRS Server, one for monitoring/recording and SPAN has been correctly configured on the switch. Server Terminal Server is not included in the LENGTH. Should it be included?

  Great! Glad to hear that you've got things to work. Thanks for posting your results.

• 11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  You will always use the 9.3.1 existing environment alongside 11.1.2.1? If Yes, according to 11.1.2.1 documentation, if you want to keep your previous version environment, you must install a
  new machine and you need to replicate data. Previous installation may not work if it is installed on the same computer.

  You install and configure the software version 11.1.2.1 in a new location and move applications and data to the new environment of deployment.

  (1) install the EPM system on a new machine or machines. You can reuse the data and the existing database, or replicate the database and data to a new machine.
  If you migrate to a new machine, you must upgrade to a platform of the same type.

  For example, if the previous version was on a Windows machine, you must upgrade to a Windows machine. If the previous version was on a Linux machine, you must upgrade one
  Linux machine.

  (2) install the EPM system on the machine or machines (Oracle recommends that you install in a new installation location). You can reuse the data and the existing database, or replicate the database and data to a new machine.

  What is written on page 174 of the EPM 11.1.2.1 Setup Guide (http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_11121.pdf)

  I hope this helps.

• Pre complains about SSL certificate on the exchange server

  Hello.  I just got a pre and tries to set up to communicate with an exchnage server.  Pre complains and will not set up the connection with this error message: «"SSL certificate error.» Is the date and time correct? ».  The date and time are correct, but the server is running a self signed certificate.  This causes no problems with iPhones that use a lot of people here.

  How can I fix it?  It is not all parameters for this problem.

  I spent the weekend trying to test and understand what was going on.  I found that if I nominated the e-mail server (name after HTTPS: / / in Setup) the same as the name of certificate displayed in the Certificate Manager (Launcher > Device Info > more info > Menu > Certificate Manager), the error should disappear.  The problem for me was that the name of cert in cert Manager was different from address of mail server (in my case server. [domain .local] instead of mail. ([Domain_name] .com).  The transformation it seems to use is:

  (1) find the certificate...

  (2) CN is HTTPS: / / in the installer?

  (3) If no, use error 'Verify the certificate, date and time not correct' (or whatever it is) - If Yes, go to HTTPS: / /.

  (4) Exchange requires safety pin?  If no, proceed to synchronize - if so, use error "unsupported of security policies.

  So I looked more closely CERT and it held several common names (CN) for the cert.  It seems that ANY OTHER DEVICE can filter through the list of common names, and use the one that works.  The Pre uses only (whether first or last, I don't know).

  So, there are two options for the certificate problem (I guess the 3rd is that you can return the phone):

  FIRST SOLUTION

  =====================

  (1) check the name of cert in cert Manager.

  (2) if it is a name that can be resolved DNS (i.e.  [mail]. [mywebsite]. [com]) then change this setting in your exchange installation program in the mail server field beside the HTTPS: / /.

  This will only fix it if your COMPUTER administrator has with permissions on the used field.  It is possible that an alias is used on other areas

  SECOND SOLUTION (as I have done)

  =================================

  (1) ensure that your Certification Authority is installed.  You can do it by clicking START > ADMINISTRATIVE TOOLS > CERTIFICATION AUTHORITY - OR - on a computer on your network using IE/Safari/Firefox and typing http://server/certsrv.  If the page is found, then you are installed, if not, then you will need to have installed.

  NOTE: SBS 2003 WILL AWARD A CERT TO THE IIS WITHOUT THE ROOT CA.  THIS SEEMS TO BE THE PROBLEM WITH THE AUTO CERTS GENERATED I HAD

  (2) If you have not installed it, go to this topic, it is well written to get step by step instructions how to install, create demand for cert, create the cert and install the cert (it took me about 30 min).   http://www.MSExchange.org/tutorials/SSL_Enabling_OWA_2003.html

  NOTE: IF YOU ALREADY HAVE A CERT ON IIS, YOU NEED TO REMOVE IT AS IT IS "DEFECTIVE" CERT BEFORE YOU CAN REQUEST A NEW CERTIFICATE.  YOU MAY BE ABLE TO REINSTALL OVER THE NEW CERT, BUT I DON'T KNOW

  (3) open https://mail.domain.com/exchange on your computer - display details of the cert and save the file on your desktop - if you are using a laptop, you can also install it on your laptop to use for use outside the Office (this is also a good back-up that you can use to get more later if needed again).

  (4) plug your pre in USB mode.

  (5) slide the cert and unplug the USB cable

  (6) go to cert Manager

  7) tap on the icon of "Sun" at the bottom left

  (8) press on the new file cert that you save in USB mode

  (9) to confirm that the new cert appears with the name of the correct mail server

  10) go to the e-mail program and configure the exchange account

  The above will create a REAL root cert (not IIS domain root Cert) that the Pre can work with.

  Really, I don't know that how/why Palm overlooked this possibility because they claimed so-called does not want to sell to companies who need strict security requirements.  For me, it means a small / medium company that has limited IT supports (according to the needs, pay as you or green guy with limited knowledge).  Then, why they test the GER in this environment, I'm not sure.  I bet they were tested on their own network, which has all the correct methods, best practices for the management of cert.  I guess it's like the developers that they have offended and almost lost their support until turned it over and said: 'sorry, we really want make you programs for our platform WebOS. ".  We've just been paranoid for so long salivate us when the bell rings. "They just didn't beta test this well enough.  The sad result of this is that Sprint will have to address all of the sheets because this certificate simple reading process was given only minimal recognition capabilities.

  But having said that - I'm now completely in love with my pre!

  I'm happy to try to help if you need it.  I found a lot of the forum of solutions were not enough detailed, so do not hesitate to contact.

• Impossible to recover the Exchange Server Email Message through workflow vRO "retrieve messages (via MailClient).

  Hello

  I'm recovering emails from my email to the Inbox of Microsoft Exchange Server.

  I tried with integrated workflows 'retrieve messages (via MailClient)"located under the Library/Mail. But I got the error message "connection failed" when running the threshold of this workflow.

  myMailClient.connect (mail server, mailPort, mailUsername, mailPassword);

  I use the pop3 Protocol and port 143. Please see screenshot below. Although I am able to send the email successfully through workflow 'sent the notification' in the library/mail folder.

  I also tried with "imap" Protocol and port 25. It was also not working. I don't know why it doesn't work? Won't do anything in the input values?

  Please help me.

  t

  Thank you

  Miloud

  The problem is resolved after you import the SSL certificate for devices.

• Missing an account e-mail coincides with the move of the VM of the Exchange Server

  Coinciding with a move to Exchange VM from one host to another, email before a certain date disappeared for a single account (about 40). It was restored from tape, but we are looking for a reason why it happened. This employee had left, two users have full access to the mailbox and to use it actively. We found nothing conclusive on the Exchange / Outlook end. is there a risk of data loss when you move a virtual machine and where I'd look for (log file) an explanation?

  Thank you

  To be honest, I don't think that the issue is with the migration - me smells like one of users accessing mail is manually moved mail out of the mailbox or put on automatic archiving - IMO if we he realized the entire mailbox migration corrupt would not be of a specific date and not just a single mailbox.

• Foundation components must be installed in the Web server.

  Hi team,
  An EPM 11.1.2.2 configuration as shown below can you please let me know if I should install and configure components foundation EMP to the webserver (server1).
  
  I understand that we need to have the Foundation services in a single server which I think is where we deploy applications on the application server (Server 2). No grouping in the installation program.
  
  client-> Server Web OHS/IHS (server 1) - > Weblogic Server (Server 2) Web application server - > essbase (Server 3).
  
  Thanks for your time on this

  If you want to install and configure the OSH as part of EMP then Yes you'll need to extract the EMP components and run Setup.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Oracle 11G and application server installed on the same server

  What are the advantages and disadvantages installation of Oracle 11 G database and Oracle (forms and reports) application server on the same server?
  
  Thank you in advance, Sonya

  Some people might want their data in an area of separate network for security reasons.
  It also depends on if it is the same people who do maintenance on db and appserver.

  It is at a lower cost with a single server and only 1 Os to implement.

• Palm pre more (Verizon) does not connect to the Exchange Server

  I've been on the phone for 3 days (bought the Verizon Pre the day it came out) and couldn't connect to my companys mail server. I had a Palm Treo 755 for years and have always got my email to that. After days of talk with representatives of the Palm, I am told that no. Verizon Pre is able to connect to a server to exchange corp at this time. I'm quite upset hereby, since after listening to a Council of representatives of Palm, I've had a computer scientist to ensure that our server was updated, we had the correct certificates, etc. This of course took hours to complete, and the person of COMPUTING time is not cheap. So afte spend all that time and money dealing with this, I learned today by a supervisor at Palm that ANYBODY on Verizons network is able to connect to their mail corp server and that it was an issue that is discussed in.

  I searched the forums and found a lot of this Sprint service problems, but didn't find any with Verizon. Anyone else out there on Verizon and unable to connect? Or maybe the better question is, someone out there have a pre with Verizon and IS able to connect to their server Exchange (EAS)?

  Correction to my last post. After doing a reset on my phone and update of our server, I was able to connect to my email. Thank you for your comments update to SP2. Overall, I am still very upset over the phone support provided Palm. As I mentioned before, I brought to the SP2 SP1 vs option several times by phone and I said whenever it was not the question. Even my computer, have fought a little, to get this update since that he had heard the same information I did representatives of the Palm on the phone. After you have created an account on here and PDAguy pointing me to the long thread about people having a similar problem, I showed it to our it guy and he has fortunately upgraded our server to SP2.

  I'm happy to get this issue resolved, but feel still Palm mislead me along the way, probably cost me over $ 400 in IT supports, lost my time and traveling in a Verizon store to swap a perfectly good phone and I try the different options which should not be fooled. I did 3 different calls to Palm (with my COMPUTER technician who has been paid by the hour) and each call lasts about 1 to 1-1/2 hrs. Most of the current time on hold any 'research' rep my question.  Even had a representative on the phone to me lie and tell me that he was able to connect to our server (using my info) with a meadow he had with him. He told me so I had a defective phone, and I was directed to return to Verizon to switch the phone outside. After I had passed the phone out, and of course, it doesn't work, I was then told by another representative of Palm and his superior that it was a known issue and that person is with Verizon was able to connect to a server (with a pre) because of a software problem on the phone. I got a refund from Verizon to get this phone for $149, but with all my time lost, the cost of my computer and the lack of knowledge by representatives of Palm, I think I have probably the most expensive Palm Pre Plus there.

  Message edited by tjp2176 on 01/28/2010 20:03

• How can I remove the RDP licenses that have been incorrectly installed on the wrong server?

  Server 2008 R2.

  Hello Nigel needs help,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
   
  Thank you

• Missing on the exchange server user account

  In Exchange 2003 I see not a staff account in the list of staff users in active directory.  The fact name appear in the global address list in exchange, and when I try to recreate the account I get the message: "the login user name, you have chosen is already used in this business.   Choose another logon name, and then try again. "How can I find this account I change the password?

  Hi StevenHartung

  
  I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.

  http://social.technet.Microsoft.com/forums/en-us/category/Exchange2010, exchangeserver.

   

  I hope this helps.

• SPECweb custom install on the Web server template

  I just got the web CD SPEC. I Webserve model running, and when I try to load setup.jar it fails and it says that it cannot open the file.

  I installed the latest version of Java on the machine and when I double click setup.jar it loads the splash screen, select a language and then the progress bar goes to 75% and then hangs forever.

  Any ideas? I missed a step when configuring the model?

  any help is appreciated!

  The installshield used in the SPECweb2005 kit is old and cranky - two options:

  try command prompt window / terminal:

  In addition, may have more success with a 32-bit Java virtual machine.