Ink cartridge / all-in-one Photosmart C5183 bought in Dubai

Similar Questions

• All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

  Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

  It prints than a very altered, unreadable copy.

  I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

  I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

  Thanks for CAhpUSER respondent

  I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

  The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

  I hope this helps clear things upwards a bit for you

• Ink advantage all-in - One K209a: cartridge number NOT mentioned in ANY document, anywhere in the HP, on HP website course Supply for K209a-z

  I will try to find suitable cartridge number to the

  HP Deskjet Ink Advantage all-in-One Printer - K209a.

  But the cartridge number NOT mentioned in ANY document downloaded for this printer, OR anywhere in the HP Web site for this product, OR the printer Web page is located on the HP supply course!

  Crazy way to support product by HP!

  According to the Guide of reference here to page 1...

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-all-in-one-printer-series---K2/3811342/model/3811361/manuals

  The printer uses cartridges HP 703.

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• HP C3100 All - In - One Photosmart: very old printer and drivers

  I know that probably the answer to this already, but here goes anyway. I have an old printer. HP all-in-One Photosmart C3100. He has just shot ten years old. I had some time after 2006, or at the least, it is the date indicated on the manual.  I just got a new computer to replace my computer that was about as old. I climbed up from XP to Windows 7.

  My printer, which works great, needs a driver and HP does not seem to do more. On their website, they say nothing more than ten years. I have no chance or is there anything else I can do?

  Thank you.

  Here is your support page.

  http://support.HP.com/us-en/product/HP-Photosmart-C3100-all-in-one-printer-series/1146511/drivers

  Click here to find your exact model number and check for the drivers and the software Win 7.

• Alles all-in-one Photosmart C7288: Canoe more scan on my alles all-in-one Photosmart C7288

  When I swichted above 7 window tot 10 window, I lost my ability to scan from my printer. While a 7200 inctjet

  the stil printer prints documents but I can't scan my documents more.

  I used the updated software for my printer. In the installation, the system asked for a cd

  This one, I have more someone can send me a cd or someone has another solution.

  Thank you

  Hey @SNAJ,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of the all-in-one Photosmart C7288 printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, uninstall all software associated with the printer to your PC. Finally, download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you are able to scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• How or where to get them or buy the original CD for printer all-in-one Photosmart C7280

  My installation CD original for printer all-in-one Photosmart C7280 lost in the transition. Unfortunately now I have to reinstall the software, but the installation file downloaded refuses to install advanced features by asking to insert the original CD.

  Now where can you get such a CD.

  Thanks in advance.

  Shlomo [personal information]

  You can download or order a copy at this link.

• Printer all-in-one Photosmart D110: think there paper jams

  Printer all-in-one Photosmart D110: think there most of the time paper jams (the computer print or copy).  This happened for some time.  Sometimes it will print and then at other times, it will produce jam messages when there is not a jam.  I tried all the solutions of HP.

  There is a document to help walk a (real or fake) paper jam errors troubleshooting in the photosmart D110. This document can be found here.

  So I'll send more information via the Inbox of (private) messages.

• All-in-one Photosmart HP 7510: Photosmart 7510 - black ink cartridge print does not, but the tests are very well

  All the test prints are very good.  I have cleaned the print heads, broken cartridges.  I just replaced all the yesterday.

  Today, I can't print black.  The documents are great dimmed or blank pages come out.  I use a MacBook 2007, 10.6.8.  What else do you need to know?

  Thanks in advance!

  Hey @jas493,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I see you have a recurring problem of print quality with your HP Photosmart 7510 e-all-in-one printer.  I want to help you with this.

  What you describe, it seems that you tried all HP recommended troubleshooting steps.  Fortunately, given that your printer has a removable printhead, there are some other steps you can take to address the issue:

  Check the status of print head warranty

   

• Photosmart HP 7510: How can I configure alert of low ink for All - In - One 7510.

  See the answer to this question, but I don't seem to have the software mentioned in the response. So, I guess that a second question is can I re - install if I can't find the original install disc?

  Welcome to the HP community @SallyLR,

  I understand that you're looking to reinstall the software for your HP Photosmart 7510. I'll be happy to help you.

  Here is a link to the HP site where you can download the software and drivers for the HP Photosmart 7510 e-all-in-one printer.

  Software and driver - printer e-all-in-one HP Photosmart 7510 - C311a

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• 7520 of HP PHOTOSMART all-in-one: black cartridge for printer all-in-one PHOTOSMART HP720

  I ordered ink cartridges Combo Pack for the 7520 HP which includes a XL Black and color cartridges. However, I need the black size cartridge regular.  After having removed the black cartridge regular size and noting its product number (CR283W), I went to the HP site.  The Web site search indicates that the product number is invalid.  Then I called the HP support line. They have confirmed that it is not valid and sought-after product number to another number. After 15 minutes, I was directed to the shipping department. The shipping department was very helpful, but could not give me the information I need.  Please, please, please, can someone give me a product for a black size cartridge number regular to adapt to the HP7520?  I have the XL size black cartridge, I need the ordinary black.  Thank you.

  The 'regular size black' is a photo, available in regular or XL capacity cartrdige.  The number of actual product will vary depending on the country in which you stand, but you can find the correct information site about HP SureSupply.

   

• All-in-one Photosmart HP 6525: HP Photosmart 6525 stopped properly print in black

  Happy Friday! I had a problem the last two weeks with my printer. I usually use the printer on a daily basis for school. I got the impression during 1 1/2 to 2 years and have not had a problem until now.

  Here is a list of what I've tried so far:

  • Aligned the printer
  • Clean print heads
  • Restored by default
  • Erased the vents on the ink cartridges
  • Clean the screens between the printer and the cartridge

  I did all the steps that I could find for troubleshooting on the internet. Is there something else I can do?

  Hello @chawna,

  Welcome to the Forums of HP Support!

  I understand that you are not able to print black ink of your HP Photosmart 6525 e-all-in-one printer. Thank you for all the troubleshooting steps you have already finished before reaching out for support.

  Unfortunately, at this stage, because you have already completed, troubleshooting steps listed here, the next step would be a hardware replacement as system within your camera HP Photosmart print head is defective. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head is defective in your printer printing system is defective. On this model printer, printhead system is a non-replaceable element.

  I highly recommend to go to the Technical Support queue by phone in order to explore the additional hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please notify them of all the troubleshooting steps you have completed and the results of these measures.

  I wish you good luck going forward with this!

• All-in-one Photosmart HP 3310: black printing in odd rows

  Hello

  I have had this printer for almost 6 years and never had a problem with it until this last week. My impression started out as below:

  

  As you can see, the colors are fine, but black seems to be coming out in lines. As the black cartridge was almost empty, I replaced it and received the same impression. I replaced that one (just in case the cartridge was defective) and received the same impression.

  My printer is out of warranty; I tried to clean the print heads and align the printer several times over the last week and nothing has changed. In fact, every print I do has the same meaning (even thickness, same color, same type [dotted, lined, etc.], in the exact same places every time, which is interesting.

  I tried the reset of the printer (pulling on the power cord for 15 to 30 seconds, and then reconnecting), alignment and clean the print heads in the printer menu, and then on the menu in my Mac, and I tried to get the number online (here and here), but came to nothing.

  I'm currently located in the United States, in Arizona. I understand that it is an older printer, so I may end up having to replace, but I was hoping someone might have a suggestion.

  Thank you

  ~ Leslie

  Hey @TheLastDuchess,

  Welcome to the Forums of HP Support!
  
  I understand that you are having problems of black print quality when printing HP Photosmart 3310 all-in-one printer. I first want to thank you for all the details you provide me in your message. I see you've already replaced the black cartridge twice, cleaned and aligned the print head several times and reset the printer nothing helps. Unfortunately at this time, it sounds like you have a defective system of the print head. The printhead in the unit model is not replaceable part. It reads the cartridges and ink to go on the control document. If this part in case of failure to replace the entire unit would be necessary. According to all the steps that you have already tried, at the moment, you have exhausted the troubleshooting steps. I don't want you to run one more cleans away from your printhead system because it uses no ink in order to rinse the ink for cleaning system. The rule is generally, if cleans 2-3 make no difference, not to go forward with more clean as you will just waste ink.

  At that time, I suggest that you contact our Technical Support by phone team to explore additional options.

  For Arizona, HP Technical Support can be reached at the: 1800-474-6836

  Good luck and happy holidays!

• 7510 Photosmart HP e-All-in-one: Photosmart 7510 does not, tech help links not working no more.

  My 7510 Photosmart was working fine just a couple of days, but suddenly, I have a problem: he will pretend to be printed, but there are only a few weak gray lines (which do not match with the document being printed).  I tried the links online to HP technical support, but they all fail, with messages such as:

  Internal Server Error - read

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Reference #3.9733fea5.1428886261.1ce573bc

  The ink cartridges are all quite complete, except for the small black - the big one is full.  I got no error message.  I have reset to factory settings, without success.  I was printing a PDF file.  I don't think that the problem is with the computer, because I tried to print with another computer, with the same result.  The computer is a PC, in Windows 8.

  Help!  I need to print an extension with the IRS!

  Hello

  Please try the steps below...

  1 > while the printer is turned on, open the cartridge door. Check if the ramasseherbe moves automatically.

  2 > wait until the printer goes into silence.

  3 > try to manually move the carriage.

  4 > if the carriage does not move, it could be a ramasseherbe jam. You may need to check if there is a paper jam in the field of transport.

  5 > remove print head, close the printer cover. Unlug if power cord back of the printer.

  6 > wait 30 seconds, and then reconnect the power cord to the back of the printer.

  7 > install the print head and cartridges when prompted.

  If you the problem persists, please call HP Tech Support for assistance because he clould be a problem with the print head.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.