Similar Questions

• How to connect sql database to esxi to save all data from the virtual machine

  How to connect sql database to esxi to save all data from the virtual machine

  Please provide steps

  In simple terms, you cannot connect ESXi to SQL. Connect a vCenter SQL (Windows only).

  If you want to save all the data that is contained in your virtual machines, I suggest a backup solution.

  Suhas

• component AF:chooseDate - how to disable all dates in the past.

  Hi, I need to disable all dates in the af:chooseDate component.

  I should probably use DateListProvider for that, but don't know how.

  Thank you.

  KT - thank you very much.

  My bad, I completely missed the af minDate property: chooseDate.

  Exactly what I needed.

• I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

  Windows XP instead of Vista.

  I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

  Hello

  There are a few things that you would have to do to install XP instead of Vista:

  1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

  2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

  3 XP runs with 512 MB of RAM, although a little slow by today's standards.

  4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• I want to install windows os(not genuine) in the mac, I use mac air beginning 15, 4 GB of ram, 128ssd.     I want to play counter strike (overall offensive) in the windows operating system.     is 4 GB of ram enough or it takes 8 GB of ram.

  in fact, I want to install windows os (not authentic) because I'm fond of counter strike

  so, mac support this game?

  or it takes 8 GB ram to play counter strike?

  operating system windows (not authentic) will cause no effect on mac?

  If I install the windows on mac operating system, I will award 58 GB in the windows operating system and remains to mac, goes no problem in the future, due to the windows operating system?

  ALSO POINT OUT THE ADVANTAGES AND DISADVANTAGES OF INSTALLING WINDOWS ON A MAC.

  operating system Windows (not authentic)

  This means that you ask for assistance on the use of a pirate copy of Windows?

  If you install Windows, you have the advantage of being able to run Windows and the inconvenience of having to deal with all the viruses and stuff for which Windows systems are prone.

  Why not just buy the Mac version? It seems relatively inexpensive: http://store.steampowered.com/app/730/

• My intex 3g data card cannot connect to the windows operating system 8, why?

  My intex 3g data card shows the following when connecting to the internet in the windows operating system error 8. The error message is "the system cannot find the directory entry for this connection".  but I can't use the telephone connection. Please find a solution for it.

  Hello! There is another easy method.

  1. install the compatibility mode Windows 7 driver.
  2. right click on computer and select manage, then go into the Device Manager.
  3 see. you other disks with the triangle on the bottom icon, right click and select Update driver software.
  4. Select Browse my computer for driver software.
  5. now, the path should be "C:\Program Files\Intex speed 3.5 G Datacard" with subfolders include verified.
  6 do this for all 3 of them and your drivers will be installed.

  FACT! Enjoy now.

• Reg: Export data of the physical database system standby.

  Hi all

  We have a standard edition one 11 GR 1 material oracle environment, I need to export the data from the physical monitoring system.

  If anyone can suggest me, how to do it safely (up state).

  Kind regards

  Konda.

  Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle database Standard edition.

  Then you must export data only from primary or you use EXP instead of EXPDP on the standby database. Because EXPDP create a temporary table export process duration.

  Concerning

  Mr. Mahir Quluzade

• How to keep the controls panel/glance through the changes of fonts more small-medium-large screen made through a window to customize the Windows operating system?

  Hello

  My application uses digital edition, ring and other controls with chains of control/label mainly composed of EditDialogMetaFont size = 11 (all optimized for the smallest font setting in a customization of the Win operating system window). When the user changes the font to the medium setting for example the police of all labels and controls is changed size = table 13 and all labels are misaligned with some labels even extending lines of Panel and thus become partially visible. How to deal with this situation, please?

  Thank you

  Martin M.

  The description of the metafonts sheds some light on this issue; It basically says that for a police metafont predefined size is not an absolute value and can change... The solution uses the fonts provided by the operating system, for example, Arial.

• Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  3177349 wrote:

  Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  It depends only on the BONE of the application server.

  If your OS development and OS is different, you have to compile the fmb in the server again.

  Hamid

• Pulling data from the SAP ERP system in ColdFusion

  Has anyone tried to extract data from the SAP ERP system in ColdFusion?
  Y at - it any documentation on how to do this?
  
  Any help and suggestions would be very appreciated.
  
  

  Thank you, Rob.

  You are right. I don't know Java and when I looked at JCo stuff, I got confused.
  Thnaks for recommend bTalk. I met with them soon.

• I can another install another version of the Oracle database on the same operating system

  Hello

  I installed Oracle 10 g Express edition on windows xp laptop data. Can I install another another version - Oracle 9i or Oracle database 11g on the same operating system.

  Please advice.

  Thank you.

  I installed Oracle 10 g Express edition on windows xp laptop data. Can I install another another version - Oracle 9i or Oracle database 11g on the same operating system.

  On XP virtual machine (a criterion), which I normally attribute 800 M Ram, I installed 8i, 9i, 10g, 11g and database XE and same server forms & States and Developer suite.

  All work at the same time, of course.

• Is it possible I can get the virtual computer connectivity after restart to connect to the local network in the host operating system?

  Hi all

  For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,

  1. reboot the virtual computer

  2. restart VMware Workstation

  3. restart the corresponding system services in the host operating system

  The only way I can retrieve all is to restart the host operating system itself.

  Yes, is there short any path, I can retrieve the connectivity of these virtual machines?

  Thanks in advance.

  Yark

  yarkwang wrote:

  I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.

  Try installing a newer driver.  According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):

  - http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

  1 came out of safe guard 360

  Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed').  You may need to uninstall to make sure that it is not interfere.  (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).

• How can I change the file permissions that are made in the other operating system on the same machine?

  Hi all

  I installed 2 operating in two different drives (drive C & D) systems in the same laptop.
  Recently I have re-installed the Windows7 operating system on drive C. And formatted the D drive. Now, I have a BONE in my system.
  Now the problem is, I can't open some video files (the names are colored in green) who says that you have no permissions.
  I found that "Encrypt contents to secure data" is enabled in advanced of this specific file properties.
  When I go to turn off this option, it says that you have no permissions. It shows the name of the owner as a previous user of the operating system
  in the other disk drive D (that I already formatted)
  How can I get out of this problem?
  Thanks in advance.
  Balu.

  Hi all

  I installed 2 operating in two different drives (drive C & D) systems in the same laptop.

  Recently I have re-installed the Windows7 operating system on drive C. And formatted the D drive. Now, I have a BONE in my system.

  Now the problem is, I can't open some video files (the names are colored in green) who says that you have no permissions.

  I found that "Encrypt contents to secure data" is enabled in advanced of this specific file properties.

  When I go to turn off this option, it says that you have no permissions. It shows the name of the owner as a previous user of the operating system

  in the other disk drive D (that I already formatted)

  How can I get out of this problem?

  Thanks in advance.

  Balu.

  If encryption is not involved (if you do not encrypt the files originally) and is just a file permissions problem - simply take possession of the files first and then change the permissions when your account has full permissions on the files/folders that you need.

  If you do not backup your encryption certificate and key encryption is involved, then the data are almost lost to you.

• Performance problem with the guest operating system

  Hello gurus - I have one of the most unusual questions, I ran into a few time.   Here it is:

  I have a guest w2008R2 OS - installed in a 5.1 version of VM 7 vSpherer - which has an Emulex LPe 12002-E 8 GB dual HBA port is assigned to the as 2 PCI (1 device per port) via DirectPath devices

  The guest operating system has an application that performs backup tests.   WWPN of the HBA is zoned in the fabric and declared in the interface of Compellent Storage Center and everything is good here. the application creates a replay of a volume, mount it as a drive, read all the blocks, then dismantles and moves then repeat the process with what ever additional volumes should be safeguarded.   It is so cool I have do this with a VM right and not a physical host?  (would be cool if I had work NPIV but that's another story, not with technology HBA vendor support...)

  So, what's the problem?   Well, the bed the mounted disk backup will work extremely slow as slow as 5MB\sec flow, then during any other activity takes place on the system the flow jumps up to 150MB\sec all of a sudden and will continue to run fast for a long time and finish jobs on time with each work taking a little more than an hour.  But when the slow going the same work (all jobs are the same, they are simply by reading all the blocks of a bunch of 200 GB volumes and wrote a set of NULL value, do not forget this is just test) takes up to 10 hours to complete.

  I think that what is the culprit?   POWER MANAGEMENT.

  I have just about each performance counter and the journal of events known to man and I don't see anything abnormal on the table, ESXi virtual machine, nothing.  But what I see in the newspapers is any kind of activity that could happen in a transparent manner to save energy.

  FACTS on this case:

  -Reservation of memory is defined (it must be for directpath otherwise, you can't power on the virtual machine)

  -Booking CPU - has not been defined before an hour ago, I gave her just a small reserve for this rule, so I do not know if this will help alleviate the slow flow, or have an effect on what I think is a question of power (unit linked) management

  -windows power management is set to high performance never-ever - but not until an hour there doesn't I changed advanced settings for USB Disabled------turned off.  PCI peripheral energy saving setting was already off.  Which is in contradiction with my theory.  But maybe, just maybe, something is broken somewhere, or could be a bug... blah blah blah

  -the HBA, Emulex, as it appears in Device Manager in the guest OS doesn't have a power management tab to disable the feature, I don't see that the adapter VMXNET3 had this tab, and I turn off the power save setting to be conservative, do not think that it was the culprit, but as there is no real data running through the NIC.  The data is simply to be read from the disk mounted, not copied on any wire Ethernet.  never the less, in the Emulex properties is a Details tab and a selection of power data, and performance data indicate you what power mode, the device is, as well as feeding supported systems.  D0: full power, but D3, which shows as supported by the device, is an energy saving mode.   I could not yet attend the setting at the time of slow activity, my good intention as soon as possible. He is currently shooting in D0, full power.

  This is so what I have to offer on this, I hope that its just...   If I'm missing something, or if others have experienced this massive loss of unknown flow without reason and have resolutions, please share.

  If there is a way for me to disable power on the Emulex HBA management inform you please, I don't mind if I stop to enter the firmware, if that was even possible.  But if possible I would disable it immediately before any new tests are executed.

  The root cause of this issue has never been identified by VMware support which for me is a question of ugly.  Reservation of CPU for the VM using directpath IO with HBA installed in it corrected the problem.  I'd be leary with direct path IO.

• Performance of the guest operating system Win2k3

  VM Workstation: v6.5.5 build 328052

  Host OS: WinVista Ultimate (64-bit)

  4 GB of physical RAM

  50 GB of free space

  64 bit chip

  OS comments: 1) Windows 2003 SBS 2) Windows 2003 SBS

  1 GB OF RAM 1 GB OF RAM

  8GB 32 GB space space allocated

  < < SLOW > > < < ACCEPTABLE > >

  The issue I'm having is on the slopes significantly slower than #2 #1 VM.  #2 works pretty decently.  #1... well over this long last week I started it after being unused for awhile.  I got the prompt to install VMTools so I did this. He took over 36 hours to install VMTools!  ;-((.  I want to update the operating system with updates from MS since several months, but I did not "months (or more!" to run through the update.

  What are the options (performance etc.) would you suggest for #1?  Apparently, the two #1 and #2 are the same, as far as I KNOW, in all other aspects of the guest operating system and settings.  Is there a setting/performance video or paper about this game and how build/debugging etc. for optimal performance?

  TIA!

  Hello.

  How did they build each of these virtual machines out there?

  #1 is slow if #2 is also well off?

  Good luck!