SQL - lv ODBC problem free connection to the Firebird database

You don't need a DSN at all entry, if you the wiring in the right connection string.

Tags: NI Software

Similar Questions

problem to connect to the VM database
Hello

I have a host of windows 7 with vmware 8 and a comment running oracle linux version 6 Update 2 for system
x86_64 (64-bit). I installed 11 GR 2 database on this subject. The installation went even though it is OK and the database is in place and
connect very well within the system of comments. The problem is that it does not connect to any part of the outside
the comments system. An attempt to connect results in TNS-12535: TNS:operation has expired. Even the results of tnsping
in the same error.

It's results of tnsping from a customer who is not the host or guest. This client can ping the ip
192.168.1.62.

C:\ > tnsping test

AMT Ping Utility for 32-bit Windows: Release 8.1.7.0.0 - Production on 20 June 20
12 19:03:45

(c) Copyright 1997 Oracle Corporation. All rights reserved.

Try to contact (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.62) (PORT = 1521))
TNS-12535: TNS:operation expired

The guest system can ping the computers inside the network, and other systems can ping the guest and the host
systems without any problem. The listener and the database are all the comments system.

The entire communication is inside the firewall, the local network, so the firewall isn't a problem here.
The only solution I've seen on the internet is to remove the /etc/resolv.conf file (does not work) or use
NAT networking for the virtual machine. We use networks bridged with static IP for machinery of the host and the guest
and it seems that others have used the bridged network also.

Is there an obligation to use NAT to make this work? Is there a setting that makes the connection to the guest
database system possible?

Thank you to everyone who is trying to solve this problem.
Take a look at EdStevens and other answers on this similar topic
>
You probably did not open port 1521 of the firewall (iptables) of linux comments box.
>
Re: Connectivity between Local OS(windows 7) and Vm OS(Enterprise Linux)

Or this link
http://AWADs.NET/WP/2012/02/21/how-to-connect-to-Oracle-database-on-a-guest-VM-from-the-host/

If you are looking for 'oracle 11g vm tnsping', you will find a lot of visits.

I have five Airport extreme with their network of people names different location home. I have a brighthouse router that I use to connect to all the extremes of the airport. I experienced the problem of connection to the internet.

I have five airport extreme, with their network of people of names in a different location in the House. I have a brighthouse router that I use to connect to all the extremes of the airport. I experienced the problem of connection to the internet.

Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

"We have problems to connect to the download server.

I tried to download any type of update of Skype from my Skype upward and itself deleted my Windows 10 for no reason. Whenever I have try and install the program Skype, after clicking on the first two buttons of installation for preparation, I get this message: 'we have problems to connect to the download server. The only option is to 'download' again. And continues to be the same thing. What is happening and how to fix this?

Try this download link (currently Skype version 7.16.32.102)

http://www.Skype.com/go/getskype-MSI

problem to connect to the database
Hello, I am using Windows xp and I accidentally deleted the listener, yet I failed to connect to the same database, I create a listener with the same name. Let's say I take off everything (no database and listener), so what are the steps to create back?
After that u recreated the listener... issue the current command

lsnrctl > reload

or lsnrctl > stop and lsnrctl > start

This should help u connect to the db

Published by: 870079 on July 6, 2011 03:57

RC-40201: unable to connect to the TEST database running adcfgclone.pl appsTier

Hi Experts,

While performing a cloning my instance of R12, I got RC-40201 error when I ran "adcfgclone.pl appsTier.

[appltst@oracleupk bin] $ perl adcfgclone.pl appsTier

Redwood Shores, California, USA

Applications Oracle rapid Clone

Version 12.0.0

adcfgclone Version 120.31.12010000.1

Enter the password for APPS:

Running:

/ data/appl_top/apps/apps_st/comn/clone/bin /... / JRE/bin/Java-Xmx600M - cp /data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext EI/data/appl_top/apps/apps_st/comn/clone/bin /... /Context/Apps/CTXORIG.xml-valider - pairsfile /tmp/adpairsfile_24425.lst-stade/data/appl_top/apps/apps_st/comn/clone 2 > /tmp/adcfgclone_24425.err; ECHO $? > /tmp/adcfgclone_24425.res

Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

Provide the values required for the creation of the new file APPL_TOP context.

Target System Hostname (virtual or normal) [oracleupk]:

SID data system target: TEST

Target database system [oracleupk] server node:

Target system Base Directory: / data / appl_top

Target system tools ORACLE_HOME directory [/ data/appl_top/apps/tech_st/10.1.2]:

Target Web ORACLE_HOME directory system [/ data/appl_top/apps/tech_st/10.1.3]:

Target system APPL_TOP directory [/ data/appl_top/apps/apps_st/appl]:

Target system COMMON_TOP directory [/ data/appl_top/apps/apps_st/comn]:

Target system Instance home directory [/ data/appl_top/inst]:

Target system service root [activated]:

Target Web Entry Point [active] System Services:

Target [active] System Web Application Services:

Target [active] Batch Processing Services system:

Other Services target system [off]:

You want to preserve the display [oracleupk:0.0] (y/n)? : n

Target display system [oracleupk:0.0]: oracleupk:1.0

System Target Pool [0-99] port: 80

Audit of the pool of port 80

fact: Port 80 pool is free

Report file is located at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst

Information available at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst complete port

RC-40201: unable to connect to the TEST database.

Create the new file APPL_TOP context of:

/Data/APPL_TOP/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp

The new context APPL_TOP file was created:

/ Data/APPL_TOP/inst/Apps/TEST_oracleupk/Appl/admin/TEST_oracleupk. XML

Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

Check the context Clone logfile /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log for more details.

Clone of fast running with the command:

Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

Running:

Apps for password:

Start application layer apply - Fri Oct 12 15:01:20 2013

/ données/appl_top/apps/apps_st/comn/clone/bin /... /jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/data/appl_top/apps/apps_st/comn/clone/ jlib/Oui/share.jar:/data/appl_top/apps/apps_st/ Comn/clone/jlib/Oui/srvm.jar:/Data/APPL_TOP/Apps/apps_st/COMN/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier EI /data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml-/data/appl_top/apps/apps_st/comn/clone - scene showProgress

Password APPS: log file located at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log

-79% completed

ERROR when executing apply...

Fri Oct 12 15:07:47 2013

ERROR: Cannot run /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl

Contents of the log file: -.

[AutoConfig error report]

The following report lists the errors autoconfig met in each

execution phase. Errors are grouped by directory and by phase.

The format of the report is:

< file name > < phase > < eventually return code >

[INSTALLATION STAGE]

AutoConfig could not successfully run the following scripts:

Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

adgendbc.sh INSTE8_SETUP 1

afcpnode.sh INSTE8_SETUP 1

afgcsreg.sh INSTE8_SETUP 1

txkWfClone.sh INSTALL_SETUP 1

[PROFILE PHASE]

AutoConfig could not successfully run the following scripts:

Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/scripts/adexecsql.pl sqlfile = / data/appl_top/inst/apps/TEST_ oracleupk/admin /. install

afwebprf. SQL INSTE8_PRF 1

amscmprf. SQL INSTE8_PRF 1

amswebprf. SQL INSTE8_PRF 1

bisadmprf. SQL INSTE8_PRF 1

bisdblrp. SQL INSTE8_PRF 1

clnadmprf. SQL INSTE8_PRF 1

cncmprf. SQL INSTE8_PRF 1

cseadmprf. SQL INSTE8_PRF 1

csfadmprf. SQL INSTE8_PRF 1

csiadmprf. SQL INSTE8_PRF 1

eamadmprf. SQL INSTE8_PRF 1

fteadmprf. SQL INSTE8_PRF 1

ibywebprf. SQL INSTE8_PRF 1

icxwebprf. SQL INSTE8_PRF 1

oksfrmprf. SQL INSTE8_PRF 1

wshadmprf. SQL INSTE8_PRF 1

Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

adadmprf.sh INSTE8_PRF 1

admk80ln.sh INSTALL_PRF 1

afadmprf.sh INSTE8_PRF 1

afcpctx.sh INSTE8_PRF 1

afcpgsm.sh	INSTE8_PRF	1
igccmprf.sh	INSTE8_PRF	1
jtfictx.sh	INSTE8_PRF	1
okladmprf.sh	INSTE8_PRF	1
txkJavaMailerCfg.sh	INSTE8_PRF	1
txkWebServicescfg.sh	INSTE8_PRF	1

[APPLY PHASE]

AutoConfig could not successfully run the following scripts:

	Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi/data/appl_top/inst/apps/TEST_oracleupk/admin/install
	adadmat.pl	INSTE8_APPLY	1

Fate of 31 stateful auto-configuration

RC-50014: Fatal: failed to run the auto configuration service

Asked by oracle.apps.ad.clone.ApplyApplTop

ERROR: AutoConfig completed with errors. Check the logfile at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log for more details.

ApplyApplTop completed successfully.

# Check the race situation AutoConfig of ApplyApplTop

WARNING: The autoconfiguration service has completed with errors.

Please help me solve this problem, your prompt response will be highly appreciated.

-Thank you

Ankur

Audit of the pool of port 70

fact: Port pool 70 is free

You used port 70 for the node of the database layer, so you will need to use the same port pool (70 instead of 80) when running "perl adcfgclone.pl appsTier.

Thank you

Hussein

DOUBLE DB: ORA-17629: unable to connect to the remote database server
[oracle@ora11g1 ~] $ export ORACLE_SID = sales
[oracle@ora11g1 ~] $ rman target sys/sales@sales

Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013

Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.

connected to target database: SALES (DBID = 690066655)

RMAN > Connect auxiliary sys/salestby2@salestby2

connected to the auxiliary database: SALES (not mounted)

RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
2 > DB_NAME SET = 'sales '.
3 > SET DB_UNIQUE_NAME = "salestby2".
4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';

From duplicate Db 5 June 13
using the control file of the target instead of recovery catalog database
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 20 type of device = DISK

content of Script memory:
{
backup that copy reuse
TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
}
execution of Script memory

From backup 5 June 13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 58 type of device = DISK
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
ORA-17629: unable to connect to the remote database server
ORA-17627: ORA-01017: name of user and password invalid. connection refused
ORA-17629: unable to connect to the remote database server
continue other job steps, not a not working will not re-run
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
ORA-17629: unable to connect to the remote database server
ORA-17627: ORA-01017: name of user and password invalid. connection refused
ORA-17629: unable to connect to the remote database server
Welcome to the oracle forums!

Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE

Always after 4 version oracle numbers and details of the OS.

Post any request outside has put between.
```
  \
```
Tags

Mark your questions answers if you give the answer

Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server

SCP $ORACLE_HOME/dbs/orapwv112 : /u01/app/oracle/product/11.2/dbs/orapwdupv112

ORA-02019: description of the connection to the remote database not found

Hi all

10.2.0.4 on solaris 10.

I can tnsping and connect to a tnsentry in tnsnames.ora from the server, but when I use the same in dblink, get the error below:
ORA-02019: description of the connection to the remote database not found. Here's the scenario. any idea?

medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon

TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 09-NOV-2011 23:49:23

Copyright (c) 1997,  2007, Oracle.  All rights reserved.

Used parameter files:
/medt/oracle/product/102/network/admin/sqlnet.ora


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
OK (20 msec)
medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon

SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:49:31 2011

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon

SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:59:54 2011

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon

TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 10-NOV-2011 00:00:02

Copyright (c) 1997,  2007, Oracle.  All rights reserved.

Used parameter files:
/medt/oracle/product/102/network/admin/sqlnet.ora


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
OK (0 msec)
medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon

SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:07 2011

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medc_pl/medxcdsw3

SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:17 2011

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options

SQL> create database link med2con connect to medts_ed identified by medfcv using  'medcon' ;

Database link created.

SQL> select * from medc@med2con;
select * from medc@med2con
                            *
ERROR at line 1:
ORA-02019: connection description for remote database not found

Try this,

SQL > create database link med2con connect to medts_ed identified by using medfcv ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))';

SQL > select * from medc@med2con;

ORA-17629: unable to connect to the remote database server
Hello

I have put Dataguard in place with primary and 1 physical standby for learning/test database:

I do NOT plan the unloading of RMAN backups on the physics of the day before.

Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
I get the following error:
---------------------------------------------------------------------------------------------------------------------
RMAN > catalog resync db_unique_name all;
from full resynchronization of the recovery catalog
full complete Resync
resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
ORA-17629: unable to connect to the remote database server
ORA-17628: Oracle 17629 error returned by remote Oracle Server
------------------------------------------------------------------------------------------------------------------
Configuration of RMAN for the main proceedings are the following:

RMAN > show all to db_unique_name asttest;

RMAN settings for database with db_unique_name ASTTEST are:
CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP # by default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default

Configuration of RMAN for instance physical standby are:

RMAN > show all to db_unique_name asttestb;

RMAN settings for database with db_unique_name ASTTESTB are:
CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default

----------------------------------------------------------------------------------------------------------------------

When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)

However, missing datafile scenario does not work on the physics of the day before.
Here are the steps I followed:
********************************************
1 renamed a file of physical data - in standby mode:

bash - $3.2 ls - ltr

Total 107832

-rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

-rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

-rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf

bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old

bash - $3.2 ls - ltr

Total 107832

-rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

-rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

-rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old

2. restore the datafile (find the data file # view v$ recover_file):
RMAN > restore datafile 5;

From restoration to 5 October 11

Segmentation fault

3. in spite of the error, published "recover datafile command.

4 RMAN > recover datafile 5;

From pick up to 5 October 11

allocated channel: ORA_DISK_1

channel ORA_DISK_1: SID = 10 type of device = DISK

RMAN-00571: ===========================================================

RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

RMAN-00571: ===========================================================

RMAN-03002: failure of the command recover at 05/10/2011 12:00:40

RMAN-06094: datafile 5 must be restored.

5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.

rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03

bash - $3.2 ls - ltr

Total 159096

-rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

-rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

-rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old

-rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf

RMAN > recover datafile 5;

From pick up to 5 October 11

using channel ORA_DISK_1

RMAN-00571: ===========================================================

RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

RMAN-00571: ===========================================================

RMAN-03002: failure of the command recover at 05/10/2011 12:01:59

RMAN-06067: RECOVER the DATABASE required with a backup control file or created

6. of course RMAN commands have failed to restore the missing data file;
So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
*********************************************************************************

Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.

The documentation I want to talk to is here (1 paragraph):

[http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]

Any pointers/direction and advise is greatly appreciated.

Best regards
NK
I got it!
```
/home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog

Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

connected to target database: PRIMARY (DBID=1562898590, not open)
connected to recovery catalog database

RMAN> resync catalog from db_unique_name all;

resyncing from database with DB_UNIQUE_NAME PRIMARY
starting full resync of recovery catalog
RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
full resync complete
```
If the necessary connection string a target/sys and a catalogue

RMAN target sys / catalog /@rcatalog

I did my standby

Will try the primary

Best regards

mseberg

Work on both. Great question!
```
connected to target database: PRIMARY (DBID=1562898590)
connected to recovery catalog database

RMAN> resync catalog from db_unique_name all;

starting full resync of recovery catalog
full resync complete

resyncing from database with DB_UNIQUE_NAME STANDBY
RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY

RMAN> 
```
Published by: mseberg on October 7, 2011 14:16

Thanks a ton for sticking to it. I'll add this little thing to my web site.

Published by: mseberg on October 7, 2011 14:22

OBIEE to connect to the configuration database
Hi, I have configured OBIEE and the only problem I have connects to an Oracle 10g database version, where the data is located. I can open the BI Server repository using the client administration tool and when I choose a database object and choose Show data... in the Properties menu for the connection pool object, it does not connect. I have triple checked that the tnsnames.ora on the UNIX file is correct. Do I need to configure a file to point to the tnsnames.ora file? I guess that's my problem.

I installed on a Unix Solaris OBIEE platform. This is the error I get when you try to run a query in the responses:
Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 17001] Oracle error code: 12170, message: ORA-12170: TNS: Connect timeout occurred at the call of the OIC OCIServerAttach. [nQSError: 17014] Cannot connect to the Oracle database. (HY000)

Any help would be greatly appreciated.

Thanks in advance!

Mike
You need to set the environment variables for the BI Server 3 find your Oracle client correctly in a Linux/Unix server. Here are the ones I use, you will need to change accordingly to your environment:

export ORACLE_HOME=/opt/app/oracle/product/10.2.0.3
Export TNS_ADMIN = / var/opt/oracle
export LD_LIBRARY_PATH = $ORACLE_HOME/lib32: $LD_LIBRARY_PATH

The TNS_ADMIN variable should point to where you have your tnsnames.ora, ldap.ora etc. These could be in the ./network/admin folder or as in our case in a specific folder the DBAs have installation to keep them separate in the client's file. Now, you need to know where to put these variables. OBIEE installation guide suggests using the script./OracleBI/setup/user.sh to do this, we prefer to put this on a special environment file which is executed when the user who runs the OBIEE connections. We would like to keep separate files OBIEE, so we know that it will not be lost if we upgrade to a new version or remove installation and install again.

Informatica Workflow not able to connect to the source database.
Hello

I completed the installation of OBI Apps.All test connections are working properly and I have also configured the relational connection in Informatica Workflow.The passwords, user name and connect string are correct. Tasks that need to connect to the source database fail always when I run an ETL. I checked the logs of these workflow session and he gave me following error:

READER_1_1_1 > DBG_21438 Reader: Source is [UPG11i], [obiee] users
READER_1_1_1 > CMN_1761 Timestamp event: [Fri Sep 05 18:01:37 2008]
READER_1_1_1 > RR_4036 error connection to the database]
Database driver error...
Function name: logon
ORA-12154: TNS: could not resolve the connect identifier specified

Database driver error...
Function name: connect
[Database error: unable to connect to the database using the user [obiee] and the connection string [UPG11i].]

DAC, I am able to connect to the databases. There seems to be a problem in relational connections. What are the drivers involved and where they should be installed.

Help, please.

Thank you and best regards,
Soumya.
It seems that the TNS Informatica file is pointing to is not the appropriate for your database entry. The the more safe thing to do is to verify that all the settings Oracle containing information in the source database.

Unable to connect to the local database (without using the tnsname)
Hi guys
I have 2 database running on the local computer.

Db1 SID - orcl (install 1)
DB2 SID - unicode (later installation)

Today I stop the basic unicode and stop its respective services.

on the back
I did a sqlplus scott/tiger, I got an error
ORA-12560: TNS:protocol adapter error

That's why
I did a
Set ORACLE_SID = orcl

and I still get the same error.
-------------------------------------------------

So I'm the other way around. I orcl database stop, stop its services and database unicode to START and its services.

I disassembled the ORACLE_SID environment variable.

Now, I have in the command prompt
sqlplus scott/tiger

I am connected to the unicode database!
-------------------------------------------------

Now I ORCL stop unicode data and start...

and I have a
sqlplus scott/tiger@ORCL...

I HAVE no problem to connect to it...
--------------------------------------------------

May I ask why should I provide the TNSname ORCL database and I do not for the UNICODE of the databases...
Both are local on my database.

What's wrong?

Moreover, I am on XP.
Thank you!
Set ORACLE_SID = orcl
sqlplus / as sysdba;
sys@ORCL > exit

Set ORACLE_SID = unicode
sqlplus / as sysdba;
sys@Unicode > exit

Well, we know that both your DBs are working properly.

So out of curiosity, I did cela tests...
(1) connect the two database and stop
(2) stop their services
(3) start only ORCL service
(4) close and reopen the command prompt to delete the var of environment ORACLE_SID

sqlplus / as sysdba;
Error: ORA-12560: TNS: Protocol adapter error

(5) now I stop service ORCL
(6) (and I start the service of UNICODE)

then I deliver

sqlplus / as sysdba;
sys@Unicode >

It seems quite normal. In your registry value ORACLE_SID is, most likely, unicode, the last created: check it out, and if so, you can connect to unicode DB without setting ORACLE_SID, while you will need to set to connect to DB orcl.

When you have more than one DB, you set the ORACLE_SID environment variable before connecting either you use connection strings.

Connection to the remote database using Oracle 11 g Builder
Hi all

This could me stupid question, but I have installed Oracle Forms and reports 11g on Win 7 machine. I copied the file "tnsnames.ora' on the record ' ORACLE_HOME/Network/Admin". We use Oracle EBS R12 and I want to create a new report using 11 g.

Using the report wizard after providing a simple query, we need to connect to the database. And even after the entry of TNS, I am getting error connecting to the database, following
"REP-0501: the specified database can be connected.
"ORA-12154: TNS: could not resolve the connect identifier specified.

I am able to connect to the same database using the Report Builder (10.1.2.0). Is there another place where I need to set the TNS entry? How can I solve this error? Please guide...

Kind regards
Priyanka
Hello

In forms and reports 11g, default defined in tnsnames.ora is: ORACLE_INSTANCE\config.
Please note that the ORACLE_INSTANCE is not the same as ORACLE_HOME.
Example:
ORACLE_HOME = D:\Oracle\Middleware\as_1
ORACLE_INSTANCE = D:\Oracle\Middleware\instances\asinst_1

If you set the admin TNS_ADMIN variable in the registry, you can point to a new location for tnsnames.ora

Kind regards
Alex

If someone useful or appropriate please mark accordingly.

connection to the forms database
Hello

Is it possible to connect to a database through forms?
I'm working on forms 6i and 10g db.

My requirement is like this.
I am developing a software, which has two types of users
(1) Admin and
(2) normal user

If the user logs on the system as an administrator.
then I need to connect that user to the database 'pay' with username "admin" and "admin" pswd

If the user logs on as a Normal user,.
then he must connect to the same database 'pay' username 'nuser' and pswd "nuser.

Is this possible? How can it be done?
You can use the built-in forms of logon to change the database connection. But before using the connection always use LOGOUT. Because the form is already connected. For ex
```
LOGOUT;
LOGON(...);
```
See Form Builder Help.

-Clément

Published by: Hannah on May 2, 2010 11:05

connection to the MySQL database
Hello
I have a Mysql database and I am trying to connect using DW. I set up a connection and filled in all the fields by following the instructions in the help section.

The connection seems to be fine (and the connection seems to be the case) to the stage of "connect to the test database" when I get the following message is displayed. "an unidentified error has accurred.

On the connection of database in the field "mySQL server", I put the following " http://64.151.210.1/localhost'. "
The same thing happens if I just "localhost".
The rest of the details are my standard remote connection information
Any help gratefully received
m
Thanks for getting back to me so fast
I tried, but I still get the "unidentified error".
It is an online database that comes as part of my Web space.
I have MySQL installed on my local computer to connect successfully, see tables etc.?
m

SQL - lv ODBC problem free connection to the Firebird database

Similar Questions

Maybe you are looking for