HP PSC 950: Issue printing HP PSC 950

Similar Questions

• Help! Computer connection issues / printer after Windows 7 upgrade

  I HOPE THAT SOMEONE HERE CAN HELP ME!  I am frustrated beyond belief.

  I have upgraded from Vista to Windows 7.  My computer is a hp dv5 pc, 64-bit.  My wireless printer is a hp OfficeJet J4680c.  Before the upgrade, wireless printing was perfect.

  Since the upgrade, when I try to print, two things will happen:

  (1) when I try to print, there is a mistake that the document cannot print.

  OR

  (2) when I try to print, the printer icon appears that the document will print, but nothing happens.  When I right click and open the Active printer, it shows that it is "printing", however the number of pages displayed is n/a.  After 2-3 minutes, the document simply disappears from the print screen, as if it printed.

  I went through the troubleshooting steps on my hp PC help & support, I have read the forums for hours and tried various fixes, I went through the center of solutions hp printer troubleshooting steps...

  The final diagnosis is that the computer is unable to 'find' the printer. Here is some additional information:

  I was able to print occasionally during the troubleshooting process (see below for more information)

  All the drivers are up to date.

  Computer and the printer are connected to the same network wireless in my house.

  Whenever I have manually print the "HP Network Configuration Page," it shows that the printer is "ready".

  Windows defender is OFF

  The Windows Firewall is DISABLED

  3rd party firewall Vipre has been RUNNING, with the same results to be

  What follows can offer anyone a clue as to the problem:

  Four times during this process of troubleshooting, I completely uninstalled printer and then reinstalled using the updated driver and instructions on the hp Web site.

  Whenever during the installation process, the computer does not find the printer, and I have to manually enter the IP address of the printer.  Then, the computer does not find the printer, and the installation continues.  Until he comes to the end, when it is completed at 98%. Then, I get a message:

  "Rediscovery printer detected problems. Maybe your PC is not able to track changes in the online status of your printer. If you use firewall software, make sure the port UDP 427 is unblocked from your printer at 192.168.0.5 for your PC. To resolve the problem, try to feed your printer market. »

  (of course checked summer port and the printer power is turned and the...) I followed all steps completely).

  Then, I give myself a choice or continue installing the software without connecting to the printer, or to continue with the installation of the printer.

  When I tried the first choice, install the software without the printer, then I went back later to install the printer. During the installation of the printer, I'm at the same point at 98%, with the same message.

  I also tried to install the printer in any case and it ends up all right, and then the printer worked for a day or two. But after a day or two, I'll be once more cannot print, and I will either receive the error message, otherwise it is not only print (SEE the BEGINNING OF THIS POST).

  I've tried everything I know to do and no message forum or troubleshooting is now offering me any new information.

  Can you help me???

  Have you tried the 'updates' on this page?  There is a couple who look like they would help.

• Photosmart C6280 issues print

  My printer prints a test without any problems page and it looks good, but everything else I try to print out characters teeny tiny. It's clear impression but so tiny I can't read it without forcing. I can't find the settings that seem to do and I rebooted the printer without modification.

  Any suggestions are welcome.

  Thanks in advance,

  ImGumby

  I forgot to mention that I'm running Windows 7 with all updates...

  I would like to try some troubleshooting I found Firefox.

  Correction of the printing problems in Firefox<>

  Another great step troubleshooting when problems from a web browser is to clear the cache and cookies.

  Clear the cache and cookies of your browser<>

  Also, I learned there are two ways to print in Yahoo, you may already know, but I suggest trying both after the above troubleshooting.

  Print an email in Yahoo Mail<>

  See you soon,.

• Issues printing InDesign using the color mode "multiply".

  Hello

  I have indesign 5.5.

  The problem I have is when printing.

  If I have a degree, for example, who graduated from gray to white to the bottom of the page, and then I place a bitmap on top of it and activate the effect of "Multiply" - she is superb on screeen - but when I try to print, I get a box around the bitmap imported overcrowded.

  I made sure all images are CMYK etc, but not joy.

  Any ideas?

  Thank you!

  Andy

  "" Sounds like it could help: InDesignSecrets "Blog Archive" eliminating YDB (yucky of discolored box) Syndrome

• C1765nfw copy Issue: printer always takes into account that I have copies of legal size, even though I set the size of the copy as "letter"...

  C1765nfw always guess I make copies of legal size, even if I set the size of the copy as a 'Letter' in the default copy settings.  Paper default tray is also 'Letter' and 8.5 x 11 paper I get incompatibility of paper for each page, because the C1765 is looking for legal size paper. and then have to erase/reset for each page I copy (including multi-page documents) how to fix this?

  I just fixed that for a client, and it was pretty simple. Somehow its default settings for the MPF tray have been changed to legal. Try going to settings of the tray then MPF and change the default to the letter. This corrected it in my case.

• How do I change computer to use only the black cartridge for print on PSC 950 h

  I'm having a problem with my hp psc 950 printer - when I try to copy something it gives me an error to support code on enter to align cartridges-i do this and it is not always copy - how can I change the printer to use only black ink, the color cartridge is probably more good, I just changed black ink and I really don't need the color in my copies - all solutions would be greatly appreciated

  Thank you

  Hi yalulu,

  I understand that you do not use the black cartridge only. I find the features page and the manual for the PSC 950 but did not find that I was looking for. I would suggest trying to use the printer in mode single cartridge, but I am not sure if the printer supports this feature, that's what I was looking for.

  Try out both cartridges, then put in black only. If this does not work, the only other suggestion I have is to replace the color cartridge.

  You can use the below document to troubleshoot color cartridge, select the document that best describes the issue, or take a look at the same time. You can find these useful.

  • Mistakes print cartridge
  • HP 15, 17, 23, 41, 45 and 78, printing unit is not detecting Due cartridge to white, waxy Substance on cartridge Contacts

  I hope this helps to solve the problem you are experiencing.

• MG5300 printer only works now iMac after turning off, then turn it on again

  MG5300 printer only works now iMac or Maclaptop after turning off, then return. Has worked well for a long time, when issue print from a device, the printer icon bounces and messages 'no connection' so stop printer, and then turn it on again and prints. For a few minutes. Next print, have to start all over again. Any thoughts? Thanx.

  Support was terrible. Checked to make sure that files and available wireless network. I had downloaded and installed the drivers. Reset the router and it is up and running again.

  Thank you Canon Support, Jason by name. Well done.

• printer V505 tells me that I need to align or troubleshoot it after putting in new ink

  Original title: troubleshooting printer v505

  I'm having a problem with a printer v505 I brought some ink the other day know it says to align or to troubleshoot it. How to do that. what you think is the problem.

  You can go to your printer manufacturer's Web site, look for its community forums or the Support forum.

  Tutorials for printer problems are:

  Windows Vista IT Pro - Windows Vista printing forum:
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/threads

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#tab11

   
   
   
   
  
   

• Network printer slow on VIsta 64

  Hello

  I have problems with my network printer. It allows to print quickly, but as of the end, it is very slow to print. It takes a while and freezes the page I'm. I have an epson artisan 700 with a pc running vista 64.  I read a few posts of moderators showing fixes for this as compensation coil and make an own sfc;  I tried these, but they do not work. Does anyone have a solution for this?

  Thank you

  Maybe one of the following help...

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why my print spooler turn?

  Why my print spooler turn? IAM using a canon mx340

  Why my print spooler turn? IAM using a canon mx340

  If the above does not help, try the following tutorials:
  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• e-mail does not print correctly

  e-mail does not print correctly

  e-mail does not print correctly

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• No print content,

  We installed MSoffice 2010 and since than my computer laptop Dell Vostro 1500 does not print the content of the web pages... Please help.

  We installed MSoffice 2010 and since than my computer laptop Dell Vostro 1500 does not print the content of the web pages... Please help.

  I don't think that the suite Microsoft Office has something to do with your printer does not print.

  See if the following tutorials will help...

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The very slow printer response

  Sending a form or document to my HP F4180 take a few minutes to start.  If mult. pages, the delay between pages is also very long.  I have deleted everything what it have to do with HP, run set. cleaner and reinstalled the original drivers without success.  I installed the same driver on your laptop with XP OS, and with the same printer connected to the laptop, everything works fine.  This started a few weeks ago, but has failed every time. First noticed when you try to print the PDF files.  It got progressively worse, everything fails.  Any help would be appreciated.

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot add printer to the computer that has vista 32 bit.

  Problems with Vista 32 bit... .cannot install printers. Error message Windows can't open add printer. The local print spooler service is not running. Please restart your spooler or restart the machine. / start spooler or restart/reboot cannot help.

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Impression of problem if I try to print from some programs

  Vista will not display in some programs? I can print from a program and if I go to the other that it will not print, it happens on both programs. I can print all other programs at any time unless you print from these two programs first? If I print from all other programs first, it will not be printed from the other two? Strange!

  Vista will not display in some programs? I can print from a program and if I go to the other that it will not print, it happens on both programs. I can print all other programs at any time unless you print from these two programs first? If I print from all other programs first, it will not be printed from the other two? Strange!

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.