Why the newly created user profiles are not lacking logon

Similar Questions

• Cannot open a session to the newly created user account

  I created a new standard user account via account management/accounts/user control.  When I log into the admin account and try to connect to the newly created account, I get the error message "the service user profile Service has no logon" "could not load user profile.  Click OK and it disconnects.  I can still log on to all the other 5 accounts that I created after I implemented this new laptop (preinstalled with windows 7).  When you click on a new account the first time, the system should establish the office and create the user records.

  I went into the Admin account and checking the application event log.  Event ID 1509 "Windows cannot copy file C:\Users\Default\ to the C:\Users\New Test Account\ location.  This error can be caused by insufficient security rights network problems. "DETAIL - access is denied.

  I solved my problem.  The index was at the event journal entry.  The permissions on the folder C:\Users\Default screwed up. (not sure how that happened).  I compared the authorization for this folder on my laptop win 7 with permissions for the same folder on my computer vista laptop.  Computer laptop win 7 has a few additional entries.  I deleted them and now I can create and open a session on new accounts on the laptop win 7.

• sqldeveloper could not connect the newly created user

  Here is my description of my computer and software
  # OS - > ubuntu 10.04 (32 bit)
  # DB-> 10 g XE
  # Request Express - > version 4.0.2
  # Sqldeveloper-> version 3.0.04
  
  I installed 10g XE in my ubuntu 10.04 (32-bit) with success and you then unblock account HR. After that I upgraded application Express 2 to 4. Then created a new "worksapce' with user name and password.
  
  I can access with success of HR, sys and system account of sqldeveloper. But when I try to access newly created valid workspace with his user name and password I could not do that. You can see more details, [see here | http://www.youtube.com/watch?v=_G_EeBgZ1KY].
  
  But in the past, I can connect newly created Workspace even as human resources account. So what's the problem. Can you guyz guide me to conncet it.
  
  
  Thanks in advance

  >
  I can access with success of HR, sys and system account of sqldeveloper. But when I try to access newly created valid workspace with his user name and password I couldn't do that
  >
  If you have a problem or a question about Apex post in this forum
  Oracle Application Express (APEX)

  In sql developer, you can only connect to users of Oracle (schemas), not workspaces. So unless you have a user called "admin" Oracle, you won't be able to connect. When you created the workspace you may reuse an existing schema or provide a name for the new schema. These patterns are what you would connect to.

  In the nav tree open the tree of the user "sys" and see the list of "other users". This subtree will contain ALL Oracle users. You must log on to one of them.

• Why the NDP module says "you are not allowed for this operation?"

  Hello world

  I hope you can help me with this problem!

  I'm playing with the NDP module has a message saying 'you are not allowed for this operation.

  This happens when I try to create a new project and try to open the window to select a project type. It also happens when I go to the ADMIN and add new types of projects?

  Is there a role limiting me or does some other underlying problem?

  Thank you in advance.

  Hello

  I think that you might miss an active project type category.

  Go to Admin-> NDP-> categories of project types.

  You must have at least one category that is active (which is indicated by a green check mark).

  Once at least one is activated, you will need to go to the Cache and rinse the taxonomy of cache (just to be sure, I would empty Admin Data Cache Group as well).

  Then you can go to the Admin and configure your project types.

  Let me know if you have any questions,

  Dmitriy

• How to connect to the newly created user account?

  Original title: new account in picasa.

  I have 84, very computer illiterate, using Windows XP and I'm trying to work through the book "Picasa for Seniors.  The first thing he asked to do me is to create a new user account to use while I work my way through the book.  I created a new account, but cannot find anythiny on how to log in to the new account.    How can I do this?   Thanks for any help. Frank

  Hi Frank,.

  (a) If you restart or use change user, you will see the number of user accounts present your computer.

  (b) select the user want to log-in in the list account.

  
  Reference: How to create and configure user accounts in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• Tree of the newly created user table is empty

  Hi all
  
  I want to create a user who can only select a schema from a prisoner by one user.
  
  Create user test identified by Test1ng;
  grant create session to test;
  Grant select on a.table1 to test;
  
  The new user will use sqldeveloper and needs the tables is visible in the tab tables, but after completing the steps above test user when using sqldeveloper will see all the tables in the tab tables.
  
  Is there way to grant select test user on the tables in the diagram with the visible tables during the user test uses sqldeveloper?
  
  Thanks in advance

  Hello Hans,.

  A user sees only the tables held under its own Tables node. To see "table1", scroll down to the "Other users" node, and then expand users 'a' and look under this node Tables.

  Kind regards
  Gary
  SQL development team

• Why the names of my chapters are not displayed in the table of contents?

  Hello. I use Indesign & DPS simple editing to make an application. In Indesign, I created several different documents that I used to make items that I put together in a Folio.  I saw it using the tool preview Adobe & on the iPad using Adobe Content Viewer. When I select the button table of contents I see thumbnail screenshots of the first page of each chapter, but no text chapter name.  For each of the documents that I used to make items that I named them after the chapter they represent, which is what I thought each chapter name defined.

  The strange thing is that before I did a couple of test folios and they do not have the name of chapter text. So what can I do to display the chapter name in the table of contents?

  Also, is there a way to change change the thumbnail used by the table of contents?

  Thank you

  The answer to both questions is in the Article Properties dialog box. Select the item in the Folio Builder Panel and choose Properties from the context menu. Specify the name of the chapter of "Title" - which is probably empty now. (There is a difference between an article name and a title of the article. The name is used for internal purposes, such as the binding, and the title appears in the application).

  At the bottom of this dialog box, you see a preview of the Table of contents. Click the folder icon and specify a PNG of 70 x 70 that you design.

• Why is my user profile is not loading properly

  My user profiles are not load then we are being put on temporary profiles and do not have access to our files etc it says contact administrator and check the log but I am the administrator and do not know what is going.

  My user profiles are not load then we are being put on temporary profiles and do not have access to our files etc it says contact administrator and check the log but I am the administrator and do not know what is going.

  Try a system restore of 1st.

  If this does not work:

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• User profile could not be saved in

  Original title: who can help?

  can't log in to my computer... User profile could not be connected... is a virus or what?

  What should I do if it is not a virus?
  who can remove this threat by using the remote computer tech and remove it, if so push me in that direction...
  Thank you
  cannot open a session

  1. start your computer and keep pressing F8 before Windows starts access the Advanced Boot Options menu.

  2. Select Mode safe mode with command prompt
  2. type: net user administrator / Active: Yes and press the ENTER key
  3. If it has reported that it has been activated or activated successfully, and then close the command prompt by typing Exit and press the ENTER key.
  4 restart the computer and log on to the user hidden administrator account.

  Create a new user account, move the data from the old user account to the newly created user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

• What does "Journal of user profile on not found" mean? I can't connect to my account

  I can't log on my user account.  the message says 'user profile on not found diary '.  What does that mean? and how to get back?

  Hello

  I suggest to start the computer in safe mode and check if you can connect:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Also check out this link:
  http://support.Microsoft.com/kb/947215/en-us

  Check if that helps.

• Request to retrieve the list of users who do not have an updated resource service

  I try to get the list of users who are not a particular resource put into service. I can't seem to find a table that links the object resource information and user information. I need to generate a CSV file. No matter who's done this before, or have any ideas. If so, any information would be very useful.
  
  Thank you

  Select * usr where usr.usr_key not in)
  Select usr.usr_key from usr, obi, obj, Ouedraogo, ost
  where oiu.usr_key = usr.usr_key
  and oiu.obi_key = obi.obi_key
  and obi.obj_key = obj.obj_key
  and obj.obj_name =: obj_name
  and oiu.ost_key = ost.ost_key
  and ost.ost_status not in ('revoked'))

  -Kevin

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• How can I get my account? "the user profile service could not connect..." User profile can not be downloaded... »

  I can't access my account... message says: "the user profile service could not connect..."  User profile can not be downloaded... »

  Help, please...

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Error message: the user profile service has no logon. Profile of user was not found.

  Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

  The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

  Thank you

  Joe R.

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I modified the registry, but my profile still not correctly load my music and tv files and still missing. Why is this?

  Hello. I changed the registry on my pc because I had a temporary profile. But all my photos, TV shows and music are missing, more I get an error message that says that I'm connected with a temporary profile, my user profile does not connect properly. Tell me please what is the next step once I changed the registry to resolve this problem?

  Hello

  What record did you change?

  Follow the steps proposed by Syed N from the following link and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/why-do-i-get-a-message-about-being-temporarily/76bebfff-b454-E011-8dfc-68b599b31bf5