sqlldr runs, but all data is moved to the wrong file

Similar Questions

• I need to reinstall the cloud creative app, but all I can find is the trial version.

  I need to reinstall the cloud creative app, but all I can find is the trial version. Help!

  Hello

  You can download the installer for the creative cloud from the link below:

  Using creative cloud | Creative cloud to desktop

  One time installed, log in with your Adobe ID trial error, please check the help below document:

  Creative Cloud applications unexpectedly back in the test mode. CS6, CCM

  Kind regards

  Sheena

• start the computer to start but stops at "failed to load the core file?

  Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?

  When I try to start my computer, it stops at "cannot load the kernel."  It will go no further. What is the solution?

  Please see: How to perform a Windows XP repair install

• Folder on CD moved to the section "files ready to be written to disk.

  I have several folders on a CD.  When I opened one of them to look at the contents, the folder was moved in the section "Files currently on the drive" to the section that says "ready to be written on the disc of the files.  It should not be written to disk, it is already on the CD.  How for it to be shown in the first section?

  I have Windows 7 Home edition 64-bit, with a combination CD/DVD drive.

  I suggest you copy the folder that is located in the section "Files ready to be written to the disk" in your desktop environment.

  Turn on "Show hidden files folders and drives" of Tools > Folder Options > view

  Also try C:\Users\\AppData\Local\Microsoft\Windows\Burn\Temporary Burn folder and delete the folder.

• I moved the documents in the wrong files can I go out and drop them in the correct file

  I did a daily newspaper and accidentally creates a different file for each month but penetrated some day diarys bad monthly files. How can I remove them and move them to the right file

  The use of the words 'documents' and 'files', I may need more information.  A document (for example you can create with a text editor) is a file.  The various documents (files) are stored in folders (icon for them looks like a folder of files in an office filing system).

  If you have saved a file (document) in a wrong folder, you can go using Windows Explorer (generally you press start and then select "Documents" in the list on the right above the Start button) and navigate to the folder where the file is.  Once you've found the file you can right-click on it and select "Cut" (or "Copy" If you want to be sure), then move them to the folder where you want the file and right click in an empty area in this folder and select "Paste".  (If you used the copy rather than the option of cutting option, you will then have to go back and delete the file in its original location).

  Another way to do the same thing that can be easier would be to open start > Documents and navigate to the folder where the wrong file and then open a second window by clicking Start > Documents again (a second window will not open unless you have navigated to a different location from the location of the opening in the first window).  In the second window, navigate to where you want the file to be.  With two windows open just click and drag the file from where it is in the first window to where you want it to be in the second window.

  If you really did not on folders, please answer with what application (program), you used to create the diary.

• When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

  When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

  Good luck to the project is corrupted.

  Be happy, you have an auto save, even if you've lost some work.

• Actual date is moved to the current if you click on the entry in the history

  So I have a weird problem. I need to retrieve the original date of my entry in navigation history because he moved to "today" and does not appear more where it was originally(3/3) after I clicked on it to verify that it was a correct URL I was looking for. He should've just added an entry for the same URL, while I have some old and new.

  Why I need this is because my landlord is trying to charge me late fees for not paying on time, even if I actually did and my history shows that it (the entry I'm looking for is a payment confirmation that all of a sudden moved to "today" when I checked it) > I need to show the original date to prove that the payment was made on my side and it's their failure of the system.

  See these threads:

  • [931864/questions/931864] I can access all the dates that a Web site has been visited?
  • [945090/questions/945090] How can I stop Firefox from history entries identical overiding?

• I have Outlook Express with 2 identities, but all emails are going to the 2nd identity. How to restore the original identity?

  A month ago I received an error message trying to download emails to my primary identity.

  "An unknown error has occurred. "Account: 'mail.optusnet.com.au', server: 'mail.optusnet.com.au', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133.
  However, all emails are going into my 2nd identity.
  How can I re - define these identities?

  A month ago I received an error message trying to download emails to my primary identity.

  "An unknown error has occurred. "Account: 'mail.optusnet.com.au', server: 'mail.optusnet.com.au', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133.

  However, all emails are going into my 2nd identity.

  How can I re - define these identities?

   
   
   
  1. The error message indicates a corrupt Inbox.
  2. Messages if even received any at least in the second ID, in tools | Accounts, you also have the first account ID listed. First fix the Inbox.
   
   
  Error number: 0x800C0133 = a corrupt Inbox.
   
  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
   
   
  To avoid this in the future:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

• Catalogue again pass PC but moved with the tree files metadata and tag

  I'll start at the beginning. Years ago I had PS elements 4 original and upgraded to PSE11 on the same computer and no problem. . at some point, we moved the files from a PC to a new PC. We knew on the displacement of PES in the catalogue and transfer of files. I guess I have relabelled and organized all the photos and was happy for years.

  Last month my husband used the utility PC mover 'link turn' PES 11 to a new PC by moving all the files. I then found the problem, because all my photos had no information and no tag and no tree tag on the screen.  As a precaution, I saved the metadata to all media and created a tree of xml on the old PC before tags it back up again. We were going to do the process of back-up/restore to the new PC, but when my husband was struggling to install Adobe PES 11 on the new PC he transferred somehow all my photos (12,000) and there they were with labels and information and all organized under their respective keywords.

  The problem is PSE11 created a new file (Bethpictures) with all the photos inside.

  Now it seems that we SO 3 separate files with these same pictures 12 000 each. I see all these folders on the left side of the page of the Organizer.

  (1) the original file from Windows

  (2) the old file from PC-bethalbums

  (3) new file of PC-bethpictures

  and XML file - tree of the tag

  so is it possible to remove redundancies and the tag tree file without any screwing or should I delete it all and make the catalog upward and restoration of the process. Can we put the Bethpicture file under bethalbums and remove duplicates? Or get rid of bethalbums (from old PC) and only has Beth photos (new files created by PSE)? Can I delete this file tree of xml tag or ultimately the removal of the tree of the tag on my page of Organizer PSE?

  Should I back up catalog now on the new PC? And then when I get a new PC in the future I can use the backup/restore process or one should always save metadata to file?

  OR should I leave him alone?

  If I take a chance - I have the following questions about the process in two steps:

  Is there a video for me to watch on how to do this?

  some issues are still confused.

  1. on the new should PC-before you begin the process I install PES 11?

  1 a - should there be pictures on the new Windows PC at all? Or get everything restored with AdobePSE11?

  2 - when the backup catalog on CD it will prompt me when another CD is required to be inserted if several CD is necessary?

  Catalogue food 3 when to new PC is there an order to put in the CD?

  Sorry for the delay in responding to...

  beth1017 wrote:

  Now it seems that we SO 3 separate files with these same pictures 12 000 each. I see all these folders on the left side of the page of the Organizer.

  (1) the original file from Windows

  (2) the old file from PC-bethalbums

  (3) new file of PC-bethpictures

  and XML file - tree of the tag

  so is it possible to remove redundancies and the tag tree file without any screwing or should I delete it all and make the Catalog backup & restore process. Can we put the Bethpicture file under bethalbums and remove duplicates? Or get rid of bethalbums (from old PC) and only has Beth photos (new files created by PSE)?

  You have layoffs after several restorations.

  Before you delete it, you should check which of these 'restorations' are the best.

  Each restoration produced a copy of your image tree and a catalog folder.

  When you open the organizer with one of the catalogues referring to these various restorations, you can consult:

  -where the pictures are stored (in the information on the right panel)

  -where the catalog folder is stored: Help menu > system information.

  If you are satisfied with a given restore session, at the locations above should not be deleted, the others can be deleted completely from the Explorer or Finder.

  Your catalog is probably not in the default location on C:, it may be in a different location. You can use Catalog Manager to move the catalog to the location by default if it is not already there.

  Should I back up catalog now on the new PC? And then when I get a new PC in the future I can use the backup/restore process or one should always save metadata to file?

  OR should I leave him alone?

  It would be a good thing. Registration of metadata to the files is a good and redundant way to be sure, but a healthy backup is sufficient.

  1. on the new should PC-before you begin the process I install PES 11?

  Yes

  1 a - should there be pictures on the new Windows PC at all? Or get everything restored with AdobePSE11?

  No, everything is restored, firstly the photo files, then the catalog. If so, you will need to convert a catalog from an older version;

• Search for ISO files in all data stores NFS bypassing the folders .snapshot

  Hello

  Someone has a tip on how to find all preparations of NFS data for an ISO files bypassing the folders ".snapshot."

  What I tried:

  "dir-Recurse vmstores: \-inclure *.iso | Select name, length folderpath, lastwritetime | out-gridview.

  But the line above is not ignoring the snapshot files and it takes forever to analyze because of the snapshot files.

  Any suggestions would be widely accepted.

  BR

  There was a "Select - first 1' in there to test, I have removed that.»

  You can try again now?

• I think to buy a new MacBook to replace my MacBook pro mid-2010, which still runs but becomes slow.  They say the current MacBook pro without retina display (which I don't think I need) is an old system and may be obsolete soon - true?

  I'm buying a new MacBook to replace my mid-2010 MacBook Pro 2.4 GHz Intel core 2 duo, 4 GB of memory, which always runs, but becomes slow.   I don't think I need retina display (if I have a lot of photos and films on the subject), but I was told that the MacBook Pro without screen retina was an old system that Apple could not support much longer. Is this true?

  Barbara cfrompa says:

  but I was told that the MacBook Pro without screen retina was an old system that Apple could not support much longer. Is this true?

  Apple only can answer such a question, and the terms of use for these forums discourage us discuss what Apple plans to do.

  I too have a MBP 2010.  I installed an SSD and that increased performance.  Consider that as an option.

  You may experience other problems that slows down your MBP.  Before commit you the important cash for a new MBP, examine the potential software problems that may be responsible for the poor performance.  With the SSD, my 2010 works better than the day he came out of the box.

  Ciao.

• Download all dates previous 80 from the current date.

  Hi all
  
  If I get start date and number of days as parameters to query then query must return all dates previous 80 starts to count.
  
  As of now, we can hard code number of the days and begin to reach this day. Please let me know how I can achieve this.
  
  Thanks and greetings
  Nana AKkivalli.

  That should do it...

  DTYLER_APP@pssdev2> var startdate   varchar2(10)
  DTYLER_APP@pssdev2> var numdays     number
  DTYLER_APP@pssdev2> exec :startdate := '01/09/2011'
  
  PL/SQL procedure successfully completed.
  
  STARTDATE
  --------------------------------
  01/09/2011
  
  DTYLER_APP@pssdev2> exec :numdays := 10
  
  PL/SQL procedure successfully completed.
  
     NUMDAYS
  ----------
          10
  
  DTYLER_APP@pssdev2>
  DTYLER_APP@pssdev2> SELECT
    2      TO_DATE(:startdate,'dd/mm/yyyy') - (rownum - 1) dt
    3  FROM
    4      dual
    5  CONNECT BY
    6      LEVEL <= :numdays
    7  /
  
  DT
  --------
  01-09-11
  31-08-11
  30-08-11
  29-08-11
  28-08-11
  27-08-11
  26-08-11
  25-08-11
  24-08-11
  23-08-11
  
  10 rows selected.
  

• The monitoring of test data to write in the CSV file

  Hi, I'm new to Labview. I have a state machine in my front that runs a series of tests. Every time I update the lights on the Panel with the State. My question is, how is the best way to follow the test data my indicators are loaded with during the test, as well as at the end of the test I can group test data in a cluster, and send it to an another VI to write my CSV file. I already have a VI who writes the CSV file, but the problem is followed by data with my indicators. It would be nice if you could just the data stored in the indicators, but I realize there is no exit node =) any ideas on the best painless approach to this?

  Thank you, Rob

  Yes, that's exactly what typedef are to:

  Right-click on your control and select make typedef.

  A new window will open with only your control inside. You can register this control and then use it everywhere. When you modify the typedef, all controls of this type will change also.

  Basically, you create your own type as 'U8 numéric', 'boolean', or 'chain' except yours can be the 'cluster of all data on my front panel' type, "all the action my state machine can do," etc...

• Some programs run very slowly, and when I get the dump file on these I get the following errors

  Some programs are running very slow on Windows 7, 64-bit, 12 GB of RAM.

  I opened the Task Manager, right-click on the program and generated a dump file.

  The dump file contains the following:

  Debug version of Microsoft Windows (R) 6.3.9600.17237
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\SOMEUSER\AppData\Local\Temp\javaw (3). DMP]
  User Mini with full memory dump file: only application data is available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows 7 Version 7601 (Service Pack 1) MP (6 procs) free x 64
  Product: WinNt, suite: SingleUserTS personal
  Computer name:
  The debugging session: Wed Sep 17 19:40:25.000 2014 (UTC - 07:00)
  System Uptime: 7 days 6:20:59.258
  Running time: 0 days 0:01:03.000
  ...................................................... WARNING: dnsapi overlaps dhcpcsvc6
  WARNING: dnsapi overlaps mdnsNSP
  . WARNING: winrnr overlaps NapiNSP
  .........
  .... WARNING: webio overlaps winhttp
  ......... WARNING: WindowsCodecs overlaps dwmapi
  . WARNING: apphelp overlaps dhcpcsvc
  ..........
  ERROR: The symbol file is not found.  Defaulted to export symbols ntdll.dll.

  Summary of the symbol load error *.
  Name of the module error
  ntdll the system cannot find the specified file

  You can solve most symbol related issues by turning the symbol loading diagnostics (! sym noisy) and repeating the command that caused the symbols to load.
  You should also check that your symbol search path (.sympath) is correct.
  ERROR: The symbol file is not found.  Defaulted to export symbols for wow64cpu.dll.
  wow64cpu! TurboDispatchJumpAddressEnd + 0x6c0:
  75162e09 c3 00000000' ret

  Could I get comments on what to do?

  I already run SFC, disc scanned with difficulty of order and downloaded a few quick fixes on this site without success.

  Thank you

  Veronica

  Hi Veronica,.

  Thanks for the reply.  Refer to the following link suggestions.

  To optimize Windows for better performance

  http://Windows.Microsoft.com/en-CA/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  If you have another user account, please identify it and check the functionality. If you don't have a different user account, we will create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Try these steps and let us know the results.

• Problem with the date when you load the XML file into Oracle Database 10g

  Hi all
  
  I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
  
  ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
  
  When I run the interface, I get the following error message:
  
  java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
  
  I guess that this is the conversion of the date!
  
  I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
  
  I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
  
  1. what the Date Conversion function I could use instead?
  2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
  
  See you soon.
  
  James

  Hello.

  Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)