Printer color print some pages in color and a black and white

Similar Questions

• HP 4700: HP 4700 error 49.4C02 when printing some pages of MS Outlook 2016

  I started getting the error 49.4C02 on my 4700 printer.  I have narrowed down the only curtain pages on outlook 2016. Specifically Starbucks Awards News that use a fancy font.

  Once you have the error levonorgestrol, start the printer for the re - set.

  Other print jobs print correctly from outlook.  I also tried printing the same message from an earlier version of Microsoft outlook and it very good printer as well.

  I tried the firmware upgrade to the latest available clj4700fw_46_230_6.rfu, 46.230, but this has not fixed the problem. There was a previous message to correct for the error 49.4C02 for mac work.

  Given that it only happens with only one item, see if you can save the item by using the Save as function and then save it in lets say HTML format or one of the other available formats and then open the saved document and see if it will print.  The other thing you can try is to go the printing file then click Properties and check the settings for paper size, type and other parameters and compare with documents that print that sometimes, a document can have a parameter that is not good and it confuses the printer and gives error.

• OfficeJet 5740: 57 40 HP won't print Web pages - Internet Explorer and Microsoft edge

  I can not get the HP office jet 57402 printing Web pages. I tried with Internet Explorer and Microsoft Edge. Both recognize the printer in their printed menus. There is no printing problem of Microsoft Word or Microsoft Outlook. The printer is brand new. Would be grateful for any advice.

  Hey @Nigel2,

  Welcome to the Forums of HP Support!

  I see that you have problems with your 5740 e-all-in-one printer Officejet printing 10 Windows PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If your printer is connected to your PC via a USB cable, remove it.
  2. Close any programs you have open.
  3. In your search type in printers bar and open devices and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for all other icons of your printer listed.
  7. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

  Please let me know the results after following the above. If you are able to print properly, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Is it possible to prevent printing some pages of a PDF file?

  I created a pdf form in Adobe Acrobat 9. I wish Adobe Reader users to fill in the fields and to save, but print only pages that I select by default. Then, say, pages 1-8 display, but only the 1 and 4-8 page will be printed. I tried to put the envelope of safety on any of the pages to print, and then merge the documents, but this is not allowed. It is essential to preserve the appearance of the document, and ideally not jump from one pdf to another, so the portfolio doesn't seem to be the answer. Suggestions are welcome.

  Open the PDF file. Choose file > properties. Click the Advanced tab. In the section of Presets dialog box print, choose extended Page.

• LaserJet M477: LaserJet M477 prints some lines in italics, and vertical lines must be straight are wavy

  Hello

  I just bought my LaserJet M477 a week ago, and I've noticed a few problems print quality:

  • When I print text documents, some lines incorrect impression of italic characters, while the text is not italicized in the source document.  The problem is not random - I can print the same page twice, and it is implemented in italics in the same places.
  • When I print graphics, long straight lines parallel to the direction of the paper path have regular aberrations, light showers in them.  The problem seems to occur at intervals down the page (as if there could be an irregularity in a circular or cylindrical part inside).  I am even noticing the problem when I print the test page "setting of alignment".  In comparison, all the lines that are perpendicular to the paper path are sharp and straight.

  Another post on this site suggested a "reset power" to solve a similar problem with the italics, but this does not solve the problem for me.

  I've also updated the firmware and drivers and installed/reinstalled the printer, each nothing helps.

  The question of italics seems like it might be a software problem, but I fear that the problem of vertical wavy lines might be a mechanical problem.

  Could someone suggest solutions?

  Thank you

  Kevin

  Droms,

  I chatted with HP online tech support yesterday, share everything we have discussed here and they concluded that there is a hardware problem with the printer.  They recommended I have share the printer to my point of sale to another unit.  Fortunately, I'm still within 14 days of the back window.  HP has also instructed to give me my case ID to the retailer, probably as license to HP for them to accept the return unit and perhaps to help diagnose the unit once the logistics team sent back to HP.

  BTW, HP examined our whole conversation here thread, and the thought of a problem with the Starter toner cartridges never came.

  You can continue a similar conversation with the HP technical support.  I'd hate to see that you stuck with a defective printer.

  Thanks for your comments, and I hope that you are able to get an acceptable resolution.

  Kevin

• Printing blank pages in Word and WordPad

  Original title: problem printing with Word and WordPad

  When printing Word and Word Pad, the pages are blank.  Able to print e-mail, test page, etc.  Think that Norton antivirus has deleted a necessary file.  Remove the HP Deskjet 810C printer and reinstalled and the problem persists.

  Hi Karen Wasson.

  You can see the steps described in the articles below which deals with a similar question

  How to troubleshoot printing problems in Word 2007 or Word 2003

  http://support.Microsoft.com/kb/826862

  How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003
  http://support.Microsoft.com/kb/826845

  (The steps provided in the above items would also fix the problem of WordPad)

  For more specialist on this question help, post your query on Office Forum

  Microsoft Office forums
  http://social.answers.Microsoft.com/forums/en-us/wordshare/threads?filter=answered

• "Print key" that prints some pages of the form

  Hi, I'm not familiar with the scripts, but I think that a script may be necessary for what I want to do.  I have a form that is 4 pages long.  The first two pages are instructions, the latter two are the real form.  Can I add a button to print the document that allows printing the last two pages, not the entire document?  And the button will be on the 3rd page (at the top of the real form) or on page 4 (end of form)? Thank you!

  Can I add a button to print the document that allows printing the last two pages, not the entire document?

  Yes.

  Form1.Page1.printBtn::click - (JavaScript, client)

  XFA. Host.Print (1, "2", "3", 0, 0, 0, 0, 0);

  And the button will be on the 3rd page (at the top of the real form) or on page 4 (end of form)?

  The "print" key can go anywhere.

  Steve

• "Family Vista premium sp2 installed and now printer will not print.__Error message, ' Page too complex" and blank page "print."

  MS installed sp2 on my computer.

  Now, HP Color LaserJet 2840 all-in-one printer, connection direct usb does not print word documents.

  HP printer displays "Page too complex" and prints a blank page.

  USB connected to the printer is established, proven and fully functional until installed sp2.

  I have...
  computer restarted, then tried
  have disconnected and reconnected printer 110 AC, then,.
  printer unplugged 110 AC and USB, computer connection, rebooted, then,.
  removed from all printers in the control panel and the computer restarted, the printer is displayed as connected, but,.

  Always get the error message "Page too complex" and printed white page.

  Help, please.

  Hi livelabel,.

  Please use the forum for answers,

  You can uninstall all the driver/software HP printer utilities.  Visit the HP Web site for the last download driver and utility, reinstall them after rebooting your system.
  Also contact HP any known issue with SP2 for your printer model.  Make sure that file for the print job size is not greater than the printer can handle.

  Let us know if this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My 2610 print correctly black not white documents in black, but copies in color (Pink).

  My 2610 correctly prints (from the internet or hard drive) black not white in black but incorrectly documents best (from the copier/scanner/fax) black n white paper in color (Pink).

  I have tried everything I know or have known. Of course, the black print cartridge (although a low replacement cost) is not the cause of the problem since it prints a black no white paper in black from the internet or the hard drive.

  ???????????

  Thank you and God bless you!

  Through a long trial and error process, I got lucky and I resolved and the resolution is not what I was expecting and makes no sense to me.

  Use the settings of the printer itself, I just changed the setting from "automatic" to the "plain" paper and the setting in 'text' value 'None '.

• 4632 HP Officejet printer: hp officejet 4632 printer stuck printing alignment page

  Help please.  My printer is stuck trying to print an alignment page.  I can't scan or copy anything to the printer.  I tried unplugging the printer with power, has waited more than a minute, reconnected and it did not help.

  I tried the scan doctor and she also did not help - Alternatively found printer was 'busy', or scan doctor tried to print an alignment first page and is stuck there. If I "jump" impression of the alighment with doctor to scan page, it prints a test page, it finds everything works "ok." "" "." Print alignment page"bypasses to jump the"print alignment page"printing, and yet the screen of the printer still says 'now printing alignment page', is stuck and I can't always copy or scan anything from the printer.

  I would greatly appreciate any suggestions I tried to solve this problem for several weeks.  Thank you.

  I think I've just fixed this problem after 3 weeks.  I actually tried the doctor print because it seemed to be a printing problem.  I just tried the scan doctor, he finds problems, led me through steps and printing and scanning seem to work now.  Phew!  That took much too long to fix, but glad it works again.

• Pencil tool switches between black and white colors

  I've been using the pencil tool in Photoshop for a while, but he started to behave differently.

  When I have the foreground color, white color, and black background, the pencil tool draws in black. If I make a new line over an area that is black, it changes and performs the selection with white. It does behave like this for any other color as far as I can tell, and the layers do not seem to impact. The mode is too normal. Is attached a picture of my layout, the black caps were made while white was the foreground color, and white in the middle of the black has been selected above them, with the same settings. Is this a problem of content aware? How can I make my pencil draw blank again?

  

  Uncheck Auto clear in the options toolbar and see if that makes a difference.

  

• Today firefox has made my yahoo mail page, internet explore and mail is running in

  worked well on firefox this morning and then when I came back to the blink of mail and a completely
  another screen and colors and white squares with letters and numbers, where the buttons were, nothing
  worked through advice to yahoo so I did a system restore and the same screen came up to the top... tried the
  account on another computer and it showed good... nothing has been newly installed or implemented to date.
  Changed to Internet Explorer and e-mail account, the buttons and the theme works, looks like that
  always has. I have also turned off everything, did a restart, my e-mail account is returned to the always strange looking.

  Once you are on the tab "Content" in the preferences of Firefox, you will need to click on the 'Colors' button in the box 'fonts and colors '. There is also a checkbox to allow pages to choose their own colors. I had the same problem of white background in Yahoo mail, but once I checked this box, everything's fine! I hope it works for you!

• Colorize black and white photo

  Hey guys! I desperately need help! I take a class of digital imaging right now and our duty is to add color to a black an white photo using selections. I am completely lost, I search for tutorials and I am still not sure how its done. Some please help?

  Hi, I made this speed colouring in 2007. It shows you how it works. If you have any questions, please let me know.
  Black and white to color - YouTube

• By default Adobe color management print affecting RGB to pages B & w and color printing costs

  Adobe Print of default color management seems to be assigning RGB meta pages n & B and cost of printing color for prints n & B.

  I can manually change the color management for printing printer managed on a basis by printing instead of the default adobe color managed

  who "heals" issue, but I don't seem to be able to save this default setting. Has anyone seen and corrected this problem?

  If you want B & W prints, you must use a profile of color B & W. Adobe apps can do know anything about unless you tell them. Just because it seems gray does not mean it is gray on the technical level. You must read on color management. There is nothing wrong with the PS, you're simply using options and incorrect settings.

  Mylenium

• Color LaserJet CP1025: printer prints one page and then stops

  I've had my printer for several years. Now, when I try to print a multiple-page file, it prints a page and stops. I need to print each page individually. It is never used to do this.

  Hey @Egolioxon,

  Thanks for posting in the Forum from HP Support.

  I understand that you have a problem of partial print job when you use your HP LaserJet Pro CP1025 colour printer.  I would like to help.

  First of all, I recommend to run you HP and Scan Doctor for Windows printing.  You can click here to install it.  This utility can find and fix what is sick of your configuration.  In addition, if this approach does not help, I suggest to work your way through the steps listed in this article from HP.  She is expected to rule out possible problems of print queue.  Finally, it won't hurt to empty your temporary files, as explained below:

  Clear the Temp folder:

  1. Open your Start menu and in the box "search programs and files", type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your computer, you'll be up the pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks again for your post and have a great day!