SQLLDR, two newspapers. lines for four phys.

Similar Questions

• When computer boots up I get TWO lines for "Microsoft Windows XP Home Edition.

  I reinstalled Windows XP and somehow it reinstalled on my D: recovery partition! Craps! In any case, now, when I turn on the computer, it is written "Please select the operating system to start:" and then has two lines for Microsoft XP Home. The 1st line log on the D: partition. So I am forced to choose the 2nd line to work on my c: to ole. How can I remove the 1st line? 2nd, is my tour recovery partition? and what does one do?

  Please help!

  Thank you!

  How to change the boot.ini file: http://support.microsoft.com/kb/289022

  Currently, your .ini file may contain:

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Windows XP "/ fastdetect
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect

  Your .ini file must contain the following:

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0)partition (1)\WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect

  Note: The value of 30 seconds timeout can be set to 0 and you will start automatically on windows (do this after checking the cahnges you make are what you want).

  J W Stuart: http://www.pagestart.com

• My MBP boot with two horizontal lines at the start

  Hello

  I have a Macbook Pro (15 "mid 2015).

  2.5 GHz Intel Core i7

  OS X El Capitan

  (1) my MBP boot with two horizontal lines on a black screen after the apple logo.

  (2) sometimes the screen suddenly became all glitch on the dry mouse 5-7 (2 - 3 times a day) the cursor moves and CPU rises from 4% to 13%

  

  What I did, reset the SMC, check mac by TechTool 8 - is shows OK.

  Please help, what happens? Someone at - it experience of something similar?

  Thanks for any help,

  Ivan

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  Ciao.

• Two background colors for the same waveform graph

  Hello guys!

  I have a question for you: I am a new user of labview, so please be nice!

  So here's the deal: I just created a thanks 4 thermocouple temperature registration program.

  In real time, I then have a waveform graph 4 curves as soon as I start my program. And in my program, I had a button that allows me to record the temperature in a file for a period of time at a certain frequency.

  So, what I have is: I got my chart of waveform with a black background for example, and once I pressed the button, the background color will be changed automatically to highlight the part of the graph where the record occurs, then the background will return to the black after finished recording. In this way, on the same graph, I could say that registration took place from here to there by looking at the graph. I have two different background on the same graph.

  I don't know how to change the background of a chart using the property node, but is it possible to do what I want?

  I hope I'm clear. Otherwise, feel free to ask me for more details... I might post my vi if necessary

  See you soon

  Well, I know this is not exactly what you want to do, but you can try the following.

  Change the color of the line on the chart when recording occurs.

  You could therefore have a red line, then press on save, then it turns blue, then back to red.

  And when that is confusing since you have 4 different lines on the chart 1,

  You can change to a red line and a dotted red line, for example.

  Would that be acceptable? If so, I can show you how to do this.

• Two leased lines

  Hai guys,

  I have two leased lines, and I have two routers in each location.can that I use two lines at the same time rented. If it is possible how to configure that. Please help me.

  Hai,

  In fact, my requirement is between the locations links never fails. That's why we want to use two lines leased between two locations. Whenever a link falls down this day there another link should appear automatically without manual deducted. How we can configure routers with a single door of entry. We have two series 2800 router also for each location. How I need to plug these routers physically.

• The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty?

  The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty? How can I access the apps?

  The solution seems simpler than city above: reinstall the creative Cloud application. When he finally set in the Finder (Mac) you ' he's opinion - down under - that "synchronize file is paused. Click on the small triangle on the right and the problem is solved - or it was for me.

  Concerning

• Interactive and first two report lines "BOLD"

  Dear gurus,

  I have an interactive report with 3 select parts.

  Selects the first two create a line for each.

  The third will generate up to 150 lines.

  I am looking for something simple and good to get the first two lines / selects "BOLD"?

  Suite structure is used (not the exact code):

  Select null null, one, two,... from double

  Group of...

  Union of all the

  Select null, null,... from two

  Group of...

  Union of all the

  Select null, null,... twice.

  Someone at - it an idea?

  Hello

  Thank you for your help.

  I want to just use the first 2 rows, I use following code Javascript: (when the page loads)

  If (document. GetElementsByTagName)

  {

  var table = document.getElementById (gTable);

  lines of the var = table.getElementsByTagName ("tr");

  Rows.Item (1).style.fontWeight = 'bolder ';

  Rows.Item (2).style.fontWeight = 'bolder ';

  }

  Thanks again for your help

  This problem is solved

• ENQ: TX - conflict in line for the foreign key lock

  Hi all
  
  My DB is 11.2 exadata machine.
  
  I've got to get a case and don't know how to explain it.
  
  session 1:
  
  create the parent table)
  ID number primary key);
  create the child table)
  parent references ID number,
  name varchar2 (20));
  insert into values parent (3);
  
  session 2:
  Insert children values (3, 'aa');
  
  Session 2 crashes.
  
  I'm curious to know how oracle knows that 3 in the parent table can be inserted? Otherwise, why not oracle comes throwing ORA - 02291:parent key is not immediately that I have ' insert into child values (3, 'aa');
  
  Best regards
  Leon

  user6806750 wrote:
  >
  So I agree with the OP: the second operation should immediately receive the error 'parent does not exist', instead of block.
  >

  How about this scenario
  Session 1:

  1. insert into parent(id) values (3);
  2. commit;
  3. delete from parent where id = 3
  

  Session 2:

  1. insert into child values (3,'aa');
  

  What a result for the session 2 you expect in this case?

  Let me repeat a sentence of my previous post:
  Theoretically, the general rule is that account required to a SQL statement (whose key foreign is just one particular case) two different operations should only be serialized when both transactions run a kind of DML statement that could be contrary to the assertion.

  Now give me a scenario where two operations in effect running a kind of DML which could be contrary to the assertion of FK:
  -session 1 deletes a parent, which could be contrary to the assertion of FK because there may be child-lines 'under' parent.
  -session 2 inserts a child, which could be contrary to the assertion of FK because there could be a mother line for that child.

  ERGO: sessions 1 and 2 in your scenario above must be serialized.

  Still once, this was not the case in the scenario of the OP: FK assertiveness could never be breached by what session 1 (insert a new parent).

  >
  I don't see what that has to do with "modes of locking for insert, update, delete statements" (what do you mean by there btw?)
  >
  Thus,.
  Oracle of the second session always will go, lock in exclusive mode the entry created in the child table and then try to check for the presence of record in the parent table by reading it in shared mode (why reading is in shared mode must be clear from the scenario described above). Because the parent record is locked in exclusive mode, it cannot hold a shared lock, so he waits. So, if we need a different result if the first session of the insertions and deletions a record, Oracle, stumbled on the lock, you need to know what type of operation has led to the blocking.
  Something like that...

  The problem with the implementation of the Oracle of the assertion of FK is it locks data to serialize an assertion of the FK validation.
  Theoretically, this is the wrong approach. When dealing with simultaneous transactions and validation of constraints in several rows, it should return a predicate to first lock and then read the other rows (without lock somehow) to validate the assertion. Scientific research for this return began in the 1970s: http://dl.acm.org/citation.cfm?id=360369

• file navigation links to 2 lines for the size of the phone

  Hi everyone, Happy Thursday (or brain dead Thursday for me)!

  I'm working on a new project "sensitive."  As a new project, I am starting with the smallest width and work my way up.

  I have a simple navigation at the top of the page with links to "roll-over" six texts.

  On the smaller size (smart phone - 320px), I need to "Pack" 2-line text links, then a line for each of the large sizes.  I also need to move a chart which is directly below the links down to account for the additional line, and then back up again when the size of the window changes.  For some reason, I can't understand how to do this.  In addition, the navigation will be added to an existing HTML page when finished.

  My question is:

  How can I tell Edge to move the NAV of two lines of text on a single line (and move the chart) when I hit a specific window size (application)?

  I have questions for the media established in the CSS for the HTML part of the page.  Could I simply "show/hide" a div in particular, one with two lines for the nav and the other with a single line using CSS, or is there a better way?

  If it is possible to do so at the idea of div "show/hide", it would be better (or even possible) to make animations of different navigation for each media queries (if necessary)?

  Sorry for my temporary (I hope!) "brain dead" condition :-)

  James

  Hi, James.

  You could go about it like that, but I wanted to point you to EdgeCommons (http://www.edgecommons.org), maintained by Simon Widjaja.  It has a great video that explains how it works:

  DGE-animate-and-the-edge-Commons-Library/ http://TV.adobe.com/watch/Create-Like-Crazy-with-Adobe-Edge/flexible-layouts-using-Adobe-e

  Hope this is useful!

  -Elaine

• Identify the missing lines for the hierarchy

  Oracle 10.2.0.1
  Windows XP
  
  create table vill (identification number (5), area varchar2 (20), subarea1 varchar2 (20), subarea2 varchar2 (20), location varchar2 (20));
  Insert in the vill values(1,'AREA1','SUBAREA1','SUBAREA2','AREA1');
  Insert in the vill values(2,'AREA1','SUBAREA1','SUBAREA2','SUBAREA1');
  Insert in the vill values(3,'AREA1','SUBAREA1','SUBAREA2','SUBAREA2');
  Insert in the vill values(4,'AREA1','SUBAREA1','SUBAREA2','VILL1');
  Insert in the vill values(5,'AREA1','SUBAREA1','SUBAREA2','VILL2');
  Insert in the vill values(6,'AREA1','SUBAREA1','SUBAREA2','VILL3');
  Insert in the vill values(7,'AREA1','SUBAREA1','SUBAREA2','VILL4');
  -Before is a perfect set of lines because it has all the lines in the area, subarea1 and subarea2.
  Insert in the vill values(8,'AREA2','SUBAREA1','SUBAREA2','AREA2');
  Insert in the vill values(9,'AREA2','SUBAREA1','SUBAREA2','SUBAREA1');
  Insert in the vill values(10,'AREA2','SUBAREA1','SUBAREA2','VILL5');
  Insert in the vill values(11,'AREA2','SUBAREA1','SUBAREA2','VILL6');
  Insert in the vill values(12,'AREA2','SUBAREA1','SUBAREA2','VILL7');
  Insert in the vill values(13,'AREA2','SUBAREA1','SUBAREA2','VILL8');
  
  Insert in the vill values(14,'AREA3','SUBAREA1','SUBAREA2','AREA3');
  Insert in the vill values(15,'AREA3','SUBAREA1','SUBAREA2','SUBAREA2');
  Insert in the vill values(16,'AREA3','SUBAREA1','SUBAREA2','VILL9');
  Insert in the vill values(17,'AREA3','SUBAREA1','SUBAREA2','VILL10');
  Insert in the vill values(18,'AREA3','SUBAREA1','SUBAREA2','VILL11');
  Insert in the vill values(19,'AREA3','SUBAREA1','SUBAREA2','VILL12');
  
  Insert in the vill values(20,'AREA4','SUBAREA1','SUBAREA2','SUBAREA1');
  Insert in the vill values(21,'AREA4','SUBAREA1','SUBAREA2','SUBAREA2');
  Insert in the vill values(22,'AREA4','SUBAREA1','SUBAREA2','VILL13');
  Insert in the vill values(23,'AREA4','SUBAREA1','SUBAREA2','VILL14');
  Insert in the vill values(24,'AREA4','SUBAREA1','SUBAREA2','VILL15');
  Insert in the vill values(25,'AREA4','SUBAREA1','SUBAREA2','VILL16');
  commit;
  Select * from city;

          ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
           1 AREA1                SUBAREA1             SUBAREA2             AREA1
           2 AREA1                SUBAREA1             SUBAREA2             SUBAREA1
           3 AREA1                SUBAREA1             SUBAREA2             SUBAREA2
           4 AREA1                SUBAREA1             SUBAREA2             VILL1
           5 AREA1                SUBAREA1             SUBAREA2             VILL2
           6 AREA1                SUBAREA1             SUBAREA2             VILL3
           7 AREA1                SUBAREA1             SUBAREA2             VILL4
           8 AREA2                SUBAREA1             SUBAREA2             AREA2
           9 AREA2                SUBAREA1             SUBAREA2             SUBAREA1
          10 AREA2                SUBAREA1             SUBAREA2             VILL5
          11 AREA2                SUBAREA1             SUBAREA2             VILL6
          12 AREA2                SUBAREA1             SUBAREA2             VILL7
          13 AREA2                SUBAREA1             SUBAREA2             VILL8
          14 AREA3                SUBAREA1             SUBAREA2             AREA3
          15 AREA3                SUBAREA1             SUBAREA2             SUBAREA2
          16 AREA3                SUBAREA1             SUBAREA2             VILL9
          17 AREA3                SUBAREA1             SUBAREA2             VILL10
          18 AREA3                SUBAREA1             SUBAREA2             VILL11
          19 AREA3                SUBAREA1             SUBAREA2             VILL12
          20 AREA4                SUBAREA1             SUBAREA2             SUBAREA1
          21 AREA4                SUBAREA1             SUBAREA2             SUBAREA2
          22 AREA4                SUBAREA1             SUBAREA2             VILL13
          23 AREA4                SUBAREA1             SUBAREA2             VILL14
          24 AREA4                SUBAREA1             SUBAREA2             VILL15
          25 AREA4                SUBAREA1             SUBAREA2             VILL16
  
  25 rows selected.

  Power required:

          ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
          26 AREA2                SUBAREA1             SUBAREA2             SUBAREA2
          27 AREA3                SUBAREA1             SUBAREA2             SUBAREA1
          28 AREA4                SUBAREA1             SUBAREA2             AREA4

  Why?
  
  Because as I said above that rowset for the euro1 area is perfect because in the location column there are lines for the euro1, SUBAREA1 and SUBAREA2 area. is exists, whereas if we see that there are no lines for AREA2 with the value SUBAREA2 in the place, even regarding the Domain3, there is no line that has the value of the SUBAREA1 location and even for AREA4, there is no line as location = AREA4. It is a table which is having all the names of place with nested values; for example, we can see that vill7 is exist in zone2 including SUBAREA1 (COLUMN NAME) = "SUBAREA1" AND SUBAREA2 (COLUMN NAME) = "SUBAREA2", but I would like to know location = SUBAREA2 then it will say no line, I want to generate all the lines that is to have no value in the column location for said AREA/SUBAREA1/SUBAREA2 column. Table is sorted by ID. Total column lines are 45800.
  

  SQL> select * from vill where area='AREA1' and location='SUBAREA1';
  
          ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
           2 AREA1                SUBAREA1             SUBAREA2             SUBAREA1

  Ok

  SQL> select * from vill where area='AREA2' and location='SUBAREA1';
  
          ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
           9 AREA2                SUBAREA1             SUBAREA2             SUBAREA1

  It is also ok, but if said

  SQL> select * from vill where area='AREA2' and location='SUBAREA2';
  
  no rows selected 

  < <-Yes, this line I want to generate, because there should be a line whose location = "SBUAREA2" but why? Because otherwise how do I know what is the hierarchy of the SUBAREA2; While vill 5,6,7 and 8 were SUBAREA2 as "SUBAREA2".
  
  I'm not sure how I am clear in my question, please let me know if I need to provide more details.
  
  Thank you.

  user12050217 wrote:
  ... query should return:

  ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
  131 my state             my city              my city              street 2
  

  Sorry, I don't understand that one line. Was it a mistake? I think I understand all the other lines that you want to, but I do not understand why you want the one above. Did you mean

  ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
  131 my state             my city              street 2             street 2
  

  ?

  If this is not the case, why you don't want the row immediately above? Why don't you also:

  `       ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
         131 my state             new city             new city             street 2
  

  ?

  Assuming it was just a mistake, the following Gets the results you want

  WITH     rows_needed     AS
  (
       SELECT     area
       ,     area          AS subarea1
       ,     area          AS subarea2
       ,     area          AS location
       FROM     vill
       WHERE     area           != subarea1
       OR     area          != subarea2
       OR     area          != location
      UNION
       SELECT     area
       ,     subarea1
       ,     subarea1     AS subarea2
       ,     subarea1     AS location
       FROM     vill
       WHERE     subarea1     != subarea2
       OR     subarea1     != location
      UNION
       SELECT     area
       ,     subarea1
       ,     subarea2
       ,     subarea2     AS location
       FROM     vill
  )
  SELECT     (
            SELECT     MAX (id)
            FROM     vill
       ) + ROWNUM          AS id
  ,     area, subarea1, subarea2, location
  FROM     rows_needed
  WHERE     (area, subarea1, subarea2, location)
             NOT IN (
                     SELECT  area, subarea1, subarea2, location
                     FROM    vill
                   )
  ;
  

  except that it is for an indefinite period including the ID will assign to what line. I guess that doesn't matter, as long as 130 to 137 numbers are used (or 131 to 138, if that is what you really want).

  When I run your code on the table he returned me the desired output, but when I run it on my actual table that is having 45800 lines, then he messed up some results, because I think that in your code, I should mention the clause ORDER BY ID somewhere... Therefore, in this example I mention different IDS while inserting the lines. Your code worked very well because it is having only 25 rows with ID Ordered, while my actual table is to have 45800 lines in the table, there is no guarantee of ID ordered... so I think that its a problem with the order by clause, ID... but I don't know where I should put this clause

  What is the significance of id? Is this just a unique key? That's, I guess that each line must have an id and two rows can have the same id, but, aside from that, it doesn't matter what line has which id.
  The query I posted yesterday assumes that subarea1 and subarea2 were functionally dependent on the area. as in the example of data you posted yesterday. I see your last post that's not true, and which explains erroneous results.

  As I said yesterday, if you are actually setting up new lines in the table, you must use a sequence to generate identifiers.

• Several records displayed on the form to a time-2 lines for each record

  Hello
  I have a Web in which I want to display to 8 records at the time, in the data block, I've specified 8 as value "number of records".
  However, the record includes too many fields to display on 1 vertical line, I wish so to divide the fields into two separate lines, there will always be 8 folders, but each in two lines.
  How do I do that?
  I use form 10g. The block is a block of database using QUERY CLAUSE, and the canvas is stacked.
  Thank you

  Sandy,
  You will need set the 'Distance between Records' property for each item in the block for multiple registration. This will increase the space between the lines, so you can stack them in two rows. Unfortunately, you cannot set this property to the block - so you must set for each display element.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• I have been using firefox on this computer for four years. last night you made an update, and now I get a message saying that it is not possible to use firefox wtf

  I have been using firefox on my computer for four years. now force you an update I didn't even, because everything was already beautiful, and now, if I try to use firefox, it says it can even be used on my computer. I want to look at my watch, I don't want to spend hours to reset things to the top or waiting for an email to tell me what im supposed to do. Why in the hell you force updates when things work correctly, just f - ing that aggravate all, why can not all that never works just leave him alone to work.

  Hello, the last version that was compatible with the os x 10.4.11 is firefox 3.6.28 - you can download it here: http://www.mozilla.org/en-US/firefox/all-older.html

  Installing Firefox on Mac

  Subsequently, please disable auto-updates in preferences > advanced > updates so that it will not happen...

• Portege Z10T - documentation of command line for tinstallwb.exe (PVAT)

  Does anyone have any documentation on the command line for tinstallwb.exe, or know the switch to enter these?

  I have to do some recording during the installation.

  We are the Z10t assessment and want to install the package Toshiba value added via SCCM during our deployment task sequence. I did the same thing for the Z930 successfully.

  I use the latest version (1.6.0035.6406) of the PVAT.

  After having extracted the contents of tc30573300f.exe, the command I use is 'tinstallwb.exe s - sms. While this works in my wrapper for vbscript, it fails during the actual deployment. If I could start recording, I could see what goes wrong.

  I tried to install just \TVAP\TOSHIBA package.msi before value added, but even if that moved successfully, these sheets never appear when you press the Fn keys.

  Any ideas?

  Unfortunately, this isn t available documentation.
  I also found advice to install the PPV from the command line

  But the package contains other files such as setup.exe or install.exe exe
  Have you tested the installation, the use of these files?

• My iPad 2 could not activate after installing 9.03. Say... could not be activated because the activation server is temporarily unavailalble. I tried to 'activate' for four days... went to an Apple store bar 'Genius' and still no solution.

  I have an iPad 2 and before executing the last IOS 9.3 update, it was a camera works perfectly well. I don't have any iCloud upward. I have the valuable photos and info on my iPad that I don't want to lose!  Now I can't even use it!  He failed to activate after the execution of the update and is now in an infinite loop.
  The display shows the following:

  Could not active iPad. Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a couple if minutes. If the problem persists, contact Apple support. .... Try Again... and again...

  I was 'Try again' for four days and spent a day at the Apple Genius Bar store.  They could not find a "fix" and suggested I send my iPad in California and pay for data recovery, because the next step would be to wipe my iPad!  ***!

  I understand that you're angry about the issue of server activation, but sittuations as why it is so important to backup your data using iTunes or iCloud. You never know when you might have to restore from a backup.

  http://appletoolbox.com/2016/03/iOS-9-3-activation-error-update-fix/

• Two SMIME certificates for a contact. Only working

  I have contact (call her Kim). She has two email addresses:

  Kim (at) gmail.com

  Kim (at) yahoo.com

  I created two SMIME certificates for it - and got her to send me the cert appropriate using each email address. I used these emails to load the certificates on my Mac and iPad. However, Mac Mail, I can only send using SMIME when I use kim (at) gmail.com. If I choose another e-mail address - kim (at) yahoo.com, turns it off lock icon and the e-mail is sent "in the clear".

  If I look at the details in the Contacts, I can see his two addresses, and each has a star/checkmark beside it to indicate that the cert SMIME is available. I click on the star, and I see that each certificate is self-signed and "marked as approved for the < email address >." Looking in Keychain Access, I can see the two certificates, and do a get info on the two I can see that they are absolutely identical, with the exception of the email (and, of course, the key data).

  I know SMIME working - I use it a lot for work and it works if I send an e-mail to kim (at) gmail.com.

  Notes:

  1. I don't think this is a limitation of the capable SMIME email by contact address. I tried to make a double contact with an e-mail address by contact. It still does not work.
  2. I checked the email addresses - they both correspond exactly to what is in the cert.
  3. On my iPad, it works perfectly. I can send e-mail to kim (at) gmail.com and kim (at) yahoo.com and they get properly encrypted. It seems that there is a problem with the Mac only. I loaded the CERT of the enamel, exactly as I did for the Mac.

  BTW - I'm on the latest version of everything - OS, applications etc. I'm a compulsive updater :-).

  Ping! No one sees it?

  It is true that its probably rare - SMIME and two email addresses.

  I'm crossing my fingers :-)