SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI

Similar Questions

• How can I fix sfc cannot repair the military record [I: 24 {12}] 'settings.ini '.

  How can I fix sfc cannot repair the military record [I: 24 {12}] 'settings.ini '.

  Original title: System repair

  Hello

  You can safely ignore the error messages in the CBS.log file. The SFC.exe command falsely reports the Settings.ini file information in the CBS.log file.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after you add gadgets to the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file
  http://support.Microsoft.com/kb/947595

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• [RS] Cannot repair the military record

  My laptop has a file that apparently is corrupt.  When I ran ' sfc/scannow' and then checked the CBS log file, I found this line state that Member's file is not repairable.  It occurs in several lines.

  [RS] Cannot repair the military record [l:18 {9}] "img33.jpg" Microsoft-Windows-Shell-paper painted-Common, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  Hello

  Thanks for the reply with the status of the issue.

  I will help you further this issue. If I understand correctly you have a problem with the installation of Internet Explorer 9 and to resolve this problem, you run System File Checker tool scan. And while the scan that he gave you it has file system damaged in your computer.

  You have the Windows Vista installation disc?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try to perform the Startup Repair.

  Startup Repair

  Startup Repair: frequently asked questions

  Method 2:

  If you haven't tried the steps in the following Microsoft article, then I suggest you to try and check.

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP:

  http://support.Microsoft.com/kb/318378

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Also check the following link to resolve installation of Internet Explorer 9 associated problems.

  http://support.Microsoft.com/kb/2409098

  Please reply with the status of the issue, so that we can better help you.

• Cannot repair the military record [l:22 {11}] "t2embed.dll"

  I am installing a print driver for a HP 8120 via Windows Update (the only way to do apparently) and it does not work. HP says it's a problem of Microsoft.

  When I try to install the driver with Windows Update, it will not install. The error code is 8007006. In my own process of troubleshooting, I ran sfc/scannow program and received an error message:

  Cannot repair the military record [l:22 {11}] "t2embed.dll" Microsoft-Windows - embedding fonts, Version 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9)... impossible to check the files "

  I'm running Windows 7 Ultimate. Service pack and critical updates are current and installed. Other research indicates that it could be a permissions problem that MS created in response to a long time ago a security vulnerability. Should not a patch of Windows later corrected this and how I can fix this problem now, so I can get a result own scannow? Since it is a dll associated with the police, I think it might be the reason why used to install the print driver.

  There is an old thread on this forum 5 years ago, but I hope that MS has solved this problem in the time since this thread has been sent. Any help will be greatly appreciated!

  Hello

  You can run a convenience store of Windows Update to fix the problems with Windows update installation here: Troubleshooting Windows Update tool.

  Let us know how it goes.

  Kind regards.

• Windows resources auditor cannot repair the error.

  I ran sfc and here is a modified version of the log file. I would like to know how to deal with these problems please.

  2013-12-03 14:11:55, CSI Info 0000016 components [SR] a check 100 (0 x 00000064)
  2013-12-03 14:11:55, CSI Info 0000016b transaction [SR] beginning verify and repair
  2013-12-03 14:11:58, CSI Info 0000016 d [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2013-12-03 14:12:02, CSI Info 0000016f [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2013-12-03 14:12:02, info CSI 00000170 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "
  2013-12-03 14:12:02, info CSI 00000173 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2013-12-03 14:12:03, info CSI 00000175 [SR] full audit

  2013-12-03 14:14:14, 000001af CSI Info [SR] components check 100 (0 x 00000064)
  2013-12-03 14:14:14, 000001 b 0 CSI Info transaction [SR] beginning verify and repair
  2013-12-03 14:14:22, 000001 b 1 CSI Info [SR] repair corrupted file [ml:58 {29}, l:56 {28}] '------? \C:\Windows\system32\wbem"\[l:42{21}]"Wdf01000Uninstall.MOF' of the store
  2013-12-03 14:14:22, 000001 b 2 CSI Info [SR] repair corrupted file [ml:58 {29}, l:56 {28}] '------? \C:\Windows\system32\wbem"\[l:24{12}]"Wdf01000.MOF' of the store
  2013-12-03 14:14:23, 000001 b 4 CSI Info [SR] full audit

  2013-12-03 14:16:12, 000001e6 CSI Info [SR] check 6 components
  2013-12-03 14:16:12, CSI Info 000001e7 transaction [SR] beginning verify and repair
  2013-12-03 14:16:13, 000001e9 CSI Info [SR] verification complete
  2013-12-03 14:16:13, 000001ea CSI Info [SR] repair 2 components
  2013-12-03 14:16:13, 000001eb CSI Info transaction [SR] beginning verify and repair
  2013-12-03 14:16:13, 000001ed CSI Info [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2013-12-03 14:16:13, 000001ee CSI Info [SR] repair corrupted file [ml:58 {29}, l:56 {28}] '------? \C:\Windows\system32\wbem"\[l:42{21}]"Wdf01000Uninstall.MOF' of the store
  2013-12-03 14:16:13, 000001ef CSI Info [SR] repair corrupted file [ml:58 {29}, l:56 {28}] '------? \C:\Windows\system32\wbem"\[l:24{12}]"Wdf01000.MOF' of the store
  2013-12-03 14:16:13, 000001f1 CSI Info [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2013-12-03 14:16:13, 000001f2 CSI Info [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "
  2013-12-03 14:16:13, 000001f5 CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2013-12-03 14:16:13, 000001f7 CSI Info [SR] repair complete
  2013-12-03 14:16:13, 000001f8 CSI Info [SR] validation transaction

  2013-12-03 14:53:30, CSI Info 0000016 components [SR] a check 100 (0 x 00000064)
  2013-12-03 14:53:30, CSI Info 0000016b transaction [SR] beginning verify and repair
  2013-12-03 14:53:33, CSI Info 0000016 d [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2013-12-03 14:53:37, CSI Info 0000016f [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2013-12-03 14:53:37, info CSI 00000170 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "
  2013-12-03 14:53:37, info CSI 00000173 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2013-12-03 14:57:51, 000001e4 CSI Info [SR] check 6 components
  2013-12-03 14:57:51, CSI Info 000001e5 transaction [SR] beginning verify and repair
  2013-12-03 14:57:52, 000001e7 CSI Info [SR] verification complete
  2013-12-03 14:57:52, 000001e8 CSI Info [SR] 1 repair of components
  2013-12-03 14:57:52, 000001e9 CSI Info transaction [SR] beginning verify and repair
  2013-12-03 14:57:52, 000001eb CSI Info [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2013-12-03 14:57:52, 000001ed CSI Info [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2013-12-03 14:57:52, 000001ee CSI Info [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "
  2013-12-03 14:57:52, 000001f1 CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2013-12-03 14:57:52, 000001f3 CSI Info [SR] repair complete
  2013-12-03 14:57:52, 000001f4 CSI Info [SR] validation transaction
  2013-12-03 14:57:52, CSI Info [SR] 000001f8 check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  DISM is for Win 7 and later versions. You have in fact no problem. All of them are false positives. A caused by stupidity in design (check parameter files THAT EXCHANGE MUST to save the settings, even as detect corrupted when they do) and the other caused by a component having two sources (unusually) and only one source updated (so the other source believes that the new file must be corrupted).

• Scan SFC cannot repair the file system

  I did a scan of the file system, the sfc and the following error message will appear.  How can I solve this problem?  Apparently diagnostic research hit some kind of anomaly and the system could not repair store.

  Any help would be appreciated.

  Thank you

  2015-03-15 08:55:07, CSI Info 0000019b transaction [SR] beginning verify and repair
  2015 03-15 08:55:07, CSI Info 0000019 d [SR] cannot repair the military record [l:30 {15}] "DiagPackage.dll" Microsoft-Windows-SearchDiagnostic, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-03-15 08:55:12, CSI Info 0000019f [SR] cannot repair the military record [l:30 {15}] "DiagPackage.dll" Microsoft-Windows-SearchDiagnostic, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  ' 2015-03-15 08:55:12, 000001 has 0 CSI Info [SR] this element is referenced by [l:224{112}]"Microsoft-Windows-SearchEngine-Client-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.SearchEngine-Client-Package. '
  2015-03-15 08:55:12, 000001 has 3 CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:80 {40}] '------? \C:\Windows\diagnostics\system\Search"\[l:30{15}]"DiagPackage.dll '; source file in the store is also corrupted
  2015-03-15 08:55:13, 000001 has 5 CSI Info [SR] full audit

  Hello

  See if that helps you.

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.
  To repair the corrupted files manually, see the details of the System File Checker process to find the damaged file, and then manually replace the corrupted file with a good copy of the file.

  ___________________________________________

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  See you soon.

• Cannot install the disc existing Outlook 2003 to new Dell with windows 7.

  Cannot install the disc existing Outlook 2003 to new Dell with windows 7.
  Cannot copy old file .exe that runs on windows xp.  does not open.

  Site MS says compatible with OUtlook 2003 IS-

  That is what it is?

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't put one of my photos as a background. It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written. Please help me.

  Hi, I have problems on developing an image as a wallpaper on my laptop.

  It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written.

  I tried right click and do it the long way to go to appearance and personalization in the control panel in the start menu. None of these work and I wonder why it's happening.

  my computer is Windows vista Home premium and is about half a year. If anyone knows how to solve the problem of it not allow me to set a background please give me suggestions.

  Dan

  Treat it as a corrupted user file.  To fix this usehttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  Use the new administrator account to do this.  Follow the directions given and everything will be fine and your new admin account should work normally.  Once you have ccnfired you can access, to all your acccess all of your programs and files, you can delete the old user obsolete and corrupt.

  That's all there is to it.  Now that we know, this is the profile and not the system, the solution has been set for us.

  I hope this helps. Feel free to post back with any questions as you go along.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "When I try to load the game Empire Total War I have a Microsoft window error ' Empire: Total War has stopped working"

  Original title: when I try to load the game Empire Total War I have a Microsoft window error

  Empire: Total War has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  But when I do updates on the game and it still shows the error on the Microsoft Windows error. Also, when he is on the main site of most of the people have problems on this game I noticed just last night so can you help me and I have try all the sites to see if it works try reinstalling it and what I think.

  Hello

  1 did you recent hardware or software changes to your computer before this problem?
  2 have you tried the troubleshooting steps to solve the problem?

  I suggest you try the steps and check them off below.

  Step 1: Update the video card driver.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: Download and install the latest version of DirectX.

  Reference:
  How to download and install DirectX
  http://support.Microsoft.com/kb/179113

  Step 3: Check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.

  http://support.Microsoft.com/kb/929135

  Step 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also try contacting the seller game to help on this issue.
  http://forums.Sega.com/

  I hope this helps.

• Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer? Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Hello

  In Windows 7, the AllUsers folder is not a real file.

  It is a symbolic link that redirects to the C:\ProgramData folder.

  ProgramData is not hidden, by default.

  The correct syntax for the Attrib command would be,

  C:\>attrib h ProgramData

  You can view all files by going to the tab options\View Organize\Folder and research.

  In the section files and hidden files , place a check mark in the Show drives, folders and hidden files.

  Click Apply/OK.

  Concerning

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• Cannot repair the photo library. The best way to restore from iCloud library?

  The photo library of the system is damaged and cannot be repaired.

  It is said "Photos has attempted to repair the library"Pictures Library 2015 ", but can not open it." .

  
  

  I first met problems with this library a week before and at the time where I could repair and open the library successfully, but lacked a month value of photos.

  Given that it was successfully in the iCloud library, I left it to re - sync - but this process suspended several times before the end, and the photo library of the system now seems to be permanently damaged.

  I have no project of marked or impression of faces in the photo library of the system, then I would be happy just to restore from iCloud.

  My plan is to put in place a new - empty - library and then that designate the library of the system.

  If I understand this right, the new (empty) system Photo library will now resynchronize with iCloud and will copy all the contents of this library of back to my Mac.

  Is this correct? It is the most effective way to restore my library?

  And while I'm here - what is the best way to manage a very large library? I had my photo library become corrupted ten three or four times over the past years and have found it necessary to divide into single years to prevent this. I overlooked this piece of household by the end of 2015, and now it's happened again... Surely, there must be an easier way to manage libraries of images of several years?

  Is this correct? It is the most effective way to restore my library?

  Yes, if you don't have a useful upward on your Mac.

  And while I'm here - what is the best way to manage a very large library? I had my photo library become corrupted ten three or four times over the past years and have found it necessary to divide into single years to prevent this. I overlooked this piece of household by the end of 2015, and now it's happened again... Surely, there must be an easier way to manage libraries of images of several years?

  How do you call a large library, I've never had a corrupt Library, I think that your problems are not the result of the size of the library, but rather something else. From my experience it is recommended to maintain a local upward, I use Time machine, but also have a second to the top using a third-party backup solution.

• MacBook 13 "" Cannot repair the disk"then closed system and now cannot unlock drive.

  MacBook was slow so I checked and repaired disk permissions, everything went beautifully.  Then, I ran check disk and got the message "stopped disk utility check Macintosh HD."  Instructions for restart using the R command and choose utility disk, because the required disk to be repaired using the HD of recovery.  I followed this instruction and got the message "Stopped Macintosh HD repair disk utility," followed by "disk utility can't repair the disk.  Save as many files as possible, reformat the drive and restore your backed up files. "After you have clicked 'OK' I was given a guest to the"Restart"I did. The system tried to restart and never exceeded a gray screen before stopping.  On several occasions, he did it, so I tried to boot using the R command and perform a new installation of Mavericks, only to have it tell me that the Macintosh HD disc is locked, and Recovery HD drive is locked.  Also tried a start with the S command, and entering the guest suggested, unsuccessfully, and entering reboot nothing helps.  Now, I'm running out of ideas and seriously need help.

  For more serious issues, I do not have a backup Time Machine recently and he was always, since I backed up on my external hard drive.  I am in serious need of help and would appreciate any guidance.  Thank you!!!

  You need a new drive.

• Cannot remove the two records at once in a table

  Hi all

  I have a version in the form of table, here I have a point of delete button where them remove those audited point tabular presentation.  If I have checked for two records continuously one after the other and press the button Delete, remove only the first record I checked only. Whereas, if I chose two records where both of them is not one after the other. Both will get supprim├⌐s.

  Start

  GO_BLOCK ('ACT_QT_TXN');

  PREMIER_ENREGISTREMENT;

  LOOP

  IF: ACT_QT_TXN. CHECK_BOX256 = 1 THEN

  delete_record;

  COMMIT_FORM;

  END IF;

  NEXT_RECORD;

  IF (: System.Last_Record = "TRUE") and: ACT_QT_TXN. CHECK_BOX256 = 1 THEN

  DELETE_RECORD;

  COMMIT_FORM;

  EXIT;

  ON THE OTHER

  IF (: System.Last_Record = 'TRUE') THEN

  EXIT;

  END IF;

  END IF;

  END LOOP;

  PREMIER_ENREGISTREMENT;

  execute_query (no_validate);

  end;

  Something wrong with my script above? Please help me. Thanks /.

  Kind regards

  Lim

  The problem is with Commit_form after every single deletion. What karim gave is smooth, but I like it this way-

  PREMIER_ENREGISTREMENT;

  DECLARE

  	BEGIN
  	LOOP

  WHEN THE OUTPUT: SYSTEM. RECORD_STATUS = "NEW";

  If: CHECK_BOX = 'Y' then

  	delete_record;
  	end if;

  NEXT_RECORD;

  END LOOP;

  COMMIT;

  PREMIER_ENREGISTREMENT;

  execute_query (no_validate);

  END;

  Concerning

  Bobin

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.