SRA 8.0.0.3 does not pass the test of SSLLabs as it does on 8.0.0.1.
We can only get a grade B on a v8.0.0.3 SSL SSLLabs.com compressiometre SRA4200 is running. With identical installation on a v8.0.0.1 running SRA4600, we get an A. I have attached a PDF file with detailed scan results.
Thank you for that bring to our attention. We have identified the root cause. .
The coast of SSL Labs is demoted to 'B' only if 'Enable before secret' is set on the system > section of the Administration of the management interface. This is because a unique group of Diffie-Hellman 2048 bits is recommended for better security. If the current set of parameters is vulnerable remains a speculation the complexity of calculation in the breach of security. However, we will address this in the next update.
Please disable 'Secret transfer' to circumvent the problem until we release the patch. Sorry for the inconvenience.
Tags: Dell Tech
Similar Questions
-
My muse site does not pass the test in accordance with W3C. Why?
I ran the W3C compatible program against my homepage HTML from Muse. He complained of running out of arguments and the use of obsolete statements. Is anyone else having this kind of problem?
All 9 validation errors and warnings from validation 3 (on your homepage) are in custom HTML that has been added to the site through the object > insert HTML code... You must work with the HTML source code to encourage them to provide the code that validates integration.
-
Satellite A500 - HDMI never knit - error don't pass the test regza
Hi mate,
I come from Italy and, first of all, I want to apologize for my English... ^ ^
I'll try to explain my problem:Whenever I try to connect to my Pc to my TV by HDMI port "Satellite A500'... an error pops up:
_The tv is turned off or in standby or does not pass the test regza... _
What it means?
What can I do?Thank you
concerning
Hello
As I know some of the Toshiba LCD TVs supports binding Regaza.
This feature allows you to control the device (laptop, LCD monitor, etc.) using only a single remote control.
But this only works if all devices support the link Regaza.If one of the devices (LCD or laptop) doesn t supports the link Regaze then you will probably get an this error message.
Of course, you can disable this feature as well.
I m not very well, but you should check the Toshiba applications preinstalled on your laptop (Toshiba assist, etc.). In addition, you should consult your manual for more details -
I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?
You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.
-
Computer hp laptop 15 will not pass the logon screen
I go from 8.1 to 10. Had problems with USB and asked the Microsoft Chat Help. They fixed but my keyboard and wifi would not work. They tried again and after that they have restarted the computer remotely it will not pass the logon screen (time/date). The screen and the keyboard manual do not work. I have a hp laptop 15. They want to take their store service 02:30 minutes away. Any help?
Hi @samlobos,
Thank you for joining the HP Forums!
I read your post that your 15 HP laptop is not going to pass the opening screen. I'm happy to help you!
Please, try the steps in this guide, the computer does not (Windows 10). If this does not resolve the problem, contact HP telephone support for further assistance for the maintenance options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.
If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.
I hope that this post helps!
-
Vista/No Sound / could not play the test tone
I recently upgraded to vista and found out that I have no sound. the driver (vista version) for my advice on sound card seems fine, but when I try to play a song in windows Media Player, I get a msg "Windows Media Player has encountered a problem reading the file. For any additional help, click Help on the Web. "and I also get a"Could not play the test tone"msg when I try to test my speakers. I thought it was because of vista dosent support my shit on board sound card, so I got a new.
I just installed a Creative Audigy SE and downloaded the driver for windows vista. again, in the Device Manager, everything looks fine, the driver is end, the device works. but I still get the "Windows Media Player encountered a problem while playing the file. For additional assistance, click Web Help. "When I try to play a song, as well as the msg"cannot play the test tone"when I click on the Test button. Please help me, I'm tired of using a computer with no sound.
the solution is at the end of this thread:
http://forums.Microsoft.com/MSDN/ShowPost.aspx?PostID=2155198&SiteID=1
Basically, vista is...
-
No HDMI Audio, could not play the test tone, cannot change the default playback device
Hello, I have real trouble with my HP Pavilion dv6-2160us experience (with the i3 - 330 M, no dedicated graphics card) Windows 7-64 bit, SP1 PC and I would be happy to help.
I created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what has worked for them, nothing has worked for me.
The problem (s):
My main problem is that I can not any audio to play from my PC to my HDTV HDMI.
When I plug my HDMI cable on my PC and the TV, the TV is recognized in the playback devices, but nothing he can play.
When I try to test the TV in playback devices, I get an error "could not play the test tone.
In addition, I want to mention a few other odd behavior that I think can be a part of the main problem.
In playback devices, I can't change anything. I can't disable or enable a device, I can not set as default playback or communication devices, and I can't save changes to the properties of the device. Whenever I try to change something, as the default playback device, nothing happens, or the changes are immediately reversed.
The Question:
How can I get audio to play through HDMI on my PC (is not a problem with the TV, my other machines HP audio playback over HDMI it is fine)?
What I tried:
I tried:
- Change the default playback devices, which I am unable to do
- The utilities of reading Audio de Windows 7 running in a clean boot state
- Uninstall and reinstall the driver Intel(r) Audio display
- Uninstallation and reinstallation of the IDT High Definition Audio CODEC
- Uninstall the IDT Audio PC program under programs and features
- Disable the IDT High Definition Audio CODEC
Nothing has worked.
The drivers I have are the latest issued by HP
How can I get this to work? I would appreciate help.
I'm at the point where I'm willing to try solutions quite technically involved, so feel free to post those.
Your expertise is greatly appreciated.
Thank you.
OK, I finally have the answer for that.
If you experience this problem even and you want to fix it, you'll need a PC running the same version of Windows 7 that your PC works lot of work but it works without problems, with regard to this point.
Here's what I did to solve the problem:
- Create a system restore point.
- Run regedit.exe as administrator.
- Go to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices \Audio .
- Compare the permissions and attributes of ownership of this key and all subkeys to your work PC.
- Change all permissions and property attributes for interest on the defective PC keys as they are the same as those on the operation of the PC.
- Restart your faulty computer.
I hope this helps. It worked for me.
-
Original title: I have an Asus V550C Windows 8 touch screen laptop and all of a sudden my speakers stopped working.
I have an Asus V550C Windows 8 touch screen laptop and all of a sudden my speakers stopped working. I've tried everything. Driver updates: no need, Sound Devices check everything. It's as if she will not accept the action of the play. If you hit play on anything he blinks, then take a break again... It says my device is not functioning... He just telling me when I test: could not play the test tone.
Speakers are Realtek High Definition AudioIntel(r) Audio displayI wanted you to know what it was. GoTo meeting. I had turned off the microphone for him and he turned it off for my computer everything. It took me a while to understand it, but I did. :)
-
How to change the position of 'you passed the test?
Hello
I need help on how to change the position of the message "congratulations, you passed the test. Perhaps the failure message.
It should be in the Middle, but now to the left, it sinks in the background.
I Don t see where to change it. All of the index are adjustable but it escapes me...
Thank you very much!I think you are talking about the area of control on the slide to score? Move this area result or score slide himself slide.
-
Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.
Windows XP Service Pack 3 is running.
I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?
Hi deanie3,
We will check if the following is useful.
Method 1: Run the next Fixit and check the issue.
Hardware devices do not work or are not detected in Windows
Method 2: Follow the steps in the below article mentioned to see if it helps.
-
Windows 8 Upgrade Wizard does not pass the payment
Hi, I am looking to buy windows 8 the wizard upgrade and it won't pass the part payment, for example if I want to pay with a credit card, I fill in everything and when I click Next nothing happens, same thing if I try to use paypal, I have done everything to disable my antivirus to run it as an administrator , and nothing seems to work. Help, please!
Hello
Thanks for posting your question in the Microsoft Community Forums. If I understand you correctly, you have a problem with the upgrade to Windows 8. The upgrade of Windows 8 Wizard won't pay the Bill. Please let me know if this is not correct.
I suggest you to contact technical support for Microsoft Store for assistance on this issue.
http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_UsYou can see the article about the issue of Paypal.
Hope this information helps you. -
Dynamic L2L Tunnel - the Tunnel is up, will not pass the LAN traffic
Hello everyone. I am repurposing an ASA for my business at a remote site and must use a dynamic Configuration of L2L with Split tunneling active. We used these in the past and they work a lot, and I've referenced Cisco official documentation for the implementation. Currently, I am having a problem where I am unable to pass traffic on the local remote network over the VPN tunnel (it does even not raise the tunnel of form). However, if I run the following command in the ASA remote:
Ping inside the 192.168.9.1
I receive the ICMP responses. In addition, this traffic causes the VPN Tunnel to be created as indicated by show ISA SA:
1 peer IKE: xx.xx.xx.xx
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE
Here is the IP addressing scheme:
Network remotely (with the ASA problem): 192.168.12.0/24
Basic network (Hub): 192.168.9.0/24
Other rays: 192.168.0.0/16
Config:
ASA Version 8.2 (1)
!
hostname xxxxxxxxx
domain xxxxxxxxxxx.local
activate the xxxxxxxx password
passwd xxxxxxxxx
names of
!
interface Vlan1
nameif inside
security-level 100
192.168.12.1 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS server-group DefaultDNS
domain xxxxxxxx.local
permit same-security-traffic intra-interface
to_hq to access extended list ip 192.168.12.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
inside_nat0_outbound to access extended list ip 192.168.12.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 10 correspondence address to_hq
crypto outside_map 10 card game CORE peers. ASA. WAN. INTELLECTUAL PROPERTY
outside_map crypto 10 card value transform-set ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.0.0 255.255.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd 192.168.9.2 dns 208.67.222.222
!
dhcpd address 192.168.12.101 - 192.168.12.131 inside
rental contract interface 86400 dhcpd inside
dhcpd xxxxxxxxx.local area inside interface
dhcpd ip interface 192.168.9.50 option 66 inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
tunnel-group basis. ASA. WAN. Type of IP ipsec-l2l
tunnel-group basis. ASA. WAN. IPSec-attributes of intellectual property
pre-shared key xxxxxxxxxxxx
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostnameOnce the tunnel is in place, LAN to the Remote Site traffic won't pass through the VPN Tunnel any upward. On the side of ASA Core, I was able to Telnet in the ASA distance very well, but could not ping the Remote Access Point.
Someone at - it a glimpse of my problem?
Hello
Add:
NAT (inside) 0-list of access inside_nat0_outbound
-
Brother HL-2140 printer has not passed logo testing for XP
Use printer Brother HL-2140 for nearly two years without problem. Recently started to receive the message "Printer not passed Windows Logo testing to verify its compatibility with Windows XP Pro." Tried to change the settings through "driver settings" and "security options". Printer works but I find annoying pop ups whenever I go to print something.
If you uninstall the current driver can change the warn to ignore, restart your computer and reinstall the current driver the popup should disappear.
This is the driver that is causing the popup.
-
officejet1100 HP does not print the test page
7 the window running. The machine is hp deskdjet 1100, unsupported except in compatible file. Installed compatible driver hp dj 1000. Screen printer. Been the pillar for the test page. tell it to print the test page, order goes into Lake. Printer does not print.
Hello
As OEM HP is responsible for the good operation of the printer and their
drivers provided. Check with HP support, their documentation online and
drivers and ask in their forums.HP - DeskJet 1100 c - there is no Windows 7 drivers so check with HP
Support and their forums to see if there are work-a-rounds.
http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=14499&TaskID=135&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=usHP - DeskJet 1100 - support
http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=usSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Do not pass the datetime value to store the procedure
Hello
I have a stored procedure that will receive the date passmeter and I write it as follows:
< IsDefined ("form.yy") cfif >
< cfsqltype cfprocparam = "CF_SQL_TIMESTAMP" value = "#CreateDate (form.yy, form.mm, form.dd) #" >
< cfelse >
< cfprocparam cfsqltype = "CF_SQL_TIMESTAMP" value = "null" null = "yes" >
< / cfif >
When I do not seized the day, it runs correctly.
However, it returns me error when I entered the day:
Conversion failed when converting datetime from character string.
How can I solve the problem?
Finally, I find that I can pass the parameter correctly. The problem is the dynamic sql in the stored procedure and already solved using CAST and CONVERT. Thank you.
Maybe you are looking for
-
How to remove an old apple with a cancelled email address ID
I want to remove an old apple ID which is connected to a defunct email address
-
Using NI MODBUS - reading of several distinct registers
I'm using LabVIEW 8.6, with the NI MODBUS 1.2 VI library. I have a device which serves up to 50 records, all keeping the same format. I want to read about 20 of them, however they are not consecutive. (40010, 40015, 40017, etc.) Read Holding Regist
-
my computer does not recognize my printer brother mc
I unplugged all then reconnected. It has always been printed before the... No disk to reinstall it on the computer. No icon in the status bar or more.
-
How to open a port and limit the range of addresses that use it on PIX 515?
I have a Pix 515 v6.3 and a new piece of software that I'm getting soon need aura 5080 open port for incoming & outgoing HTTP traffic. The server will be in my DMZ to 10.0.0.1 I would like to restrict inbound access to this port so that it can be use
-
Windows 8 language isn't English after installation
Download windows 8 and installed it and the language is not English, my language, can someone give me pointers on how to fix this... Thanks in advance for your help...