Do not pass the datetime value to store the procedure

Similar Questions

• Computer hp laptop 15 will not pass the logon screen

  I go from 8.1 to 10. Had problems with USB and asked the Microsoft Chat Help. They fixed but my keyboard and wifi would not work. They tried again and after that they have restarted the computer remotely it will not pass the logon screen (time/date). The screen and the keyboard manual do not work. I have a hp laptop 15. They want to take their store service 02:30 minutes away. Any help?

  Hi @samlobos,

  Thank you for joining the HP Forums!

  I read your post that your 15 HP laptop is not going to pass the opening screen. I'm happy to help you!

  Please, try the steps in this guide, the computer does not (Windows 10). If this does not resolve the problem, contact HP telephone support for further assistance for the maintenance options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• Skype error: "Skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport...". »

  Sorry for the ridiculously long title, but that is exactly the error I get.  When I contacted my friends @ Skype that they just told me it's associated windows problem.  I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...

  Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

  Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question.  It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.

  Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted.  Again, try if you wish.  When you uninstall Skype, you will not lose your contacts.

  Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung.  You have this installed on your system?  If so (or even if not), go to C:\Windows\system32 and rename avrt.dll.  You can call it avrt.dlX or something else you like.  Reset.  Let us know if that fixes the problem.  If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

  Reference: http://forum.renoise.com/index.php?/topic/31412-solved-ntdlldll-ntalpcsendwaitreceiveport-error-on-startup/

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

  ---------------------------
  Wzcsldr2.exe - Entry Point not found
  ---------------------------
  The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
  ---------------------------
  Ok
  ---------------------------

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

  Fact that sound familiar and you have something like this installed?

  If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

  They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

  I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Twister.exe point not found the procedure entry point LeaveCriINDX (not found in KERNEL32.dll dynamic link library

  Original title: Entry Point not found error with a game

  My game (Nancy Drew: trail of the Twister) has malfunctioned or something. It worked fine for a while, but now I get this error when I try to start the game (twister.exe point not found the procedure entry point LeaveCriINDX (not found in KERNEL32.dll dynamic link library) none of using the solutions of HERInteractive.) My OS is Vista. Help, please!

  Hello

   
  I would like to inform that the error, the entry point not found:

  This error could be related if there are some missing files to initialize the game. I suggest that you uninstall and reinstall the game and check if you have the same problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Also check if the minimum requirement of games is the specification of your computer.

• Dynamic L2L Tunnel - the Tunnel is up, will not pass the LAN traffic

  Hello everyone. I am repurposing an ASA for my business at a remote site and must use a dynamic Configuration of L2L with Split tunneling active. We used these in the past and they work a lot, and I've referenced Cisco official documentation for the implementation. Currently, I am having a problem where I am unable to pass traffic on the local remote network over the VPN tunnel (it does even not raise the tunnel of form). However, if I run the following command in the ASA remote:

  Ping inside the 192.168.9.1

  I receive the ICMP responses. In addition, this traffic causes the VPN Tunnel to be created as indicated by show ISA SA:

  1 peer IKE: xx.xx.xx.xx

  Type: L2L role: initiator

  Generate a new key: no State: MM_ACTIVE

  Here is the IP addressing scheme:

  Network remotely (with the ASA problem): 192.168.12.0/24

  Basic network (Hub): 192.168.9.0/24

  Other rays: 192.168.0.0/16

  Config:

  ASA Version 8.2 (1)
  !
  hostname xxxxxxxxx
  domain xxxxxxxxxxx.local
  activate the xxxxxxxx password
  passwd xxxxxxxxx
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.12.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT
  DNS server-group DefaultDNS
  domain xxxxxxxx.local
  permit same-security-traffic intra-interface
  to_hq to access extended list ip 192.168.12.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
  inside_nat0_outbound to access extended list ip 192.168.12.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
  pager lines 24
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.0.0 255.255.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto outside_map 10 correspondence address to_hq
  crypto outside_map 10 card game CORE peers. ASA. WAN. INTELLECTUAL PROPERTY
  outside_map crypto 10 card value transform-set ESP-3DES-SHA
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet 192.168.0.0 255.255.0.0 inside
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd 192.168.9.2 dns 208.67.222.222
  !
  dhcpd address 192.168.12.101 - 192.168.12.131 inside
  rental contract interface 86400 dhcpd inside
  dhcpd xxxxxxxxx.local area inside interface
  dhcpd ip interface 192.168.9.50 option 66 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  tunnel-group basis. ASA. WAN. Type of IP ipsec-l2l
  tunnel-group basis. ASA. WAN. IPSec-attributes of intellectual property
  pre-shared key xxxxxxxxxxxx
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname

  Once the tunnel is in place, LAN to the Remote Site traffic won't pass through the VPN Tunnel any upward. On the side of ASA Core, I was able to Telnet in the ASA distance very well, but could not ping the Remote Access Point.

  Someone at - it a glimpse of my problem?

  Hello

  Add:

  NAT (inside) 0-list of access inside_nat0_outbound

• Windows 8 Upgrade Wizard does not pass the payment

  Hi, I am looking to buy windows 8 the wizard upgrade and it won't pass the part payment, for example if I want to pay with a credit card, I fill in everything and when I click Next nothing happens, same thing if I try to use paypal, I have done everything to disable my antivirus to run it as an administrator , and nothing seems to work. Help, please!

  Hello

  Thanks for posting your question in the Microsoft Community Forums. If I understand you correctly, you have a problem with the upgrade to Windows 8. The upgrade of Windows 8 Wizard won't pay the Bill. Please let me know if this is not correct.

  
  I suggest you to contact technical support for Microsoft Store for assistance on this issue.
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us
   
  You can see the article about the issue of Paypal.
   
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/i-tried-to-buy-Windows-8-through-PayPal-but-never/643bade0-82a2-4F60-B25E-7619c0594df4
   
  
  Hope this information helps you.

• Can not pass the journal

  Dear friends,
  
  I have to drop and recreate some of the redo logs to create with a larger size and somehow made mistakes (in place when I want to delete and re-create today, one of the files gives me an error.
  
  
  Select * from v$ logfile;
  
  Select Group #, sequence #, bytes, archive, Member, State
  log v$.
  
  alter database drop logfile Group 1;
  
  change the database
  Add logfile group 1 ('F:\ORACLE\DATA\DEV\REDO01.) JOURNAL '.
  ' F:\ORACLE\DATA\DEV\REDO01A. JOURNAL '.
  ' F:\ORACLE\DATA\DEV\REDO01B. Log ') SIZE M 55 reuse;
  
  alter database drop logfile Group 2;
  
  change the database
  Add logfile group 2 ('F:\ORACLE\DATA\DEV\REDO02.) JOURNAL '.
  ' F:\ORACLE\DATA\DEV\REDO02A. JOURNAL '.
  ' F:\ORACLE\DATA\DEV\REDO02B. Log ') SIZE M 55 reuse;
  
  alter database drop logfile Group 3;
  
  change the database
  Add logfile group 3 ('F:\ORACLE\DATA\DEV\REDO03.) JOURNAL '.
  ' F:\ORACLE\DATA\DEV\REDO03A. JOURNAL '.
  ' F:\ORACLE\DATA\DEV\REDO03B. Log ') SIZE M 55 reuse;
  
  change the database
  Add logfile group 4 ('F:\ORACLE\DATA\DEV\REDO03.) JOURNAL '.
  ' F:\ORACLE\DATA\DEV\REDO03A. JOURNAL '.
  ' F:\ORACLE\DATA\DEV\REDO03B. Log ') SIZE M 55 reuse; -This added recently and only has not changed the name of the file
  
  alter system switch logfile;
  CHANGE OF OVERALL SYSTEM CHECKPOINT;
  
  
  This is the error I get when I try to start the database
  
  ORA-00331: release 10.2.0.4.0 incompatible with ORACLE version 10.1.0.0.0 log
  ORA-00312: wire 2 1 online journal: "F:\ORACLE\DATA\MAinDB\LOG_02.LOG."
  
  I used by mistake newspapers that belongs to a different database.
  
  Please help me.
  
  The database of production!
  
  Nith

  run ' alter database open resetlogs.

• Error Acrobat.exe - point of entry not found the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  When you try to save a file that I changed, the file will not save and I get the following.

  the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  New computer Windows 7, the new standard Acrobat installation.

  How can I fix it?

  Hi koko,.

  This happens with a specific file?

  Have you tried to update Acrobat on the last patch v11.0.09 and verified?

  If it please try to repair Acrobat in the 'Help' menu and check if you still faces questions.

  Kind regards

  Rave

• window does not pass the validation Build 6002

  I have what is clearly a common problem.  My 4 year old computer with Windows Vista Home Premium Dell started man me messages that the installed version of Windows is not valid.  Here's what I did to try to find the cause.  Please tell me how to solve this problem.
  :

  Run malwarebytes - corrected some errors
  Run a scan complete by using Microsoft Security Essentials - no problem
  Don't run chkdsk - no error
  Run the report of MS diagnosis.  Here it is:

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation status: invalid license

  Validation code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - F4GJK - KG77H-B9HD2

  The Windows Product Key hash: iJAth4TbScMi8HdcPurlASXdEkw =

  Windows product ID: 89578-OEM-7332157-00204

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.0.6002.2.00010300.2.0.003

  ID: {9ECDD2CD-779C-4C2C-BBAB-B10164E88A59} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: Registered, 1.9.42.0

  Signed by: Microsoft

  Product name: Windows Vista (TM) Home Premium

  Architecture: 0x00000000

  Build lab: 6002.vistasp2_gdr.130104 - 1437

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: 6.0.6002.16398

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Caching the result: 100

  Version: 2.0.48.0

  OGAExec.exe signed by: Microsoft

  OGAAddin.dll signed by: Microsoft

  OGA data-->

  Office status: 100 authentic

  Microsoft Office Home and Student 2007-100 authentic

  OGA Version: Registered, 2.0.48.0

  Signed by: Microsoft

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {9ECDD2CD-779C-4C2C-BBAB-B10164E88A59}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-B9HD289578-OEM-7332157-002042S-1-5-21-1005771013-1596688161-2321268846Dell Inc.. Inspiron 530 Dell Inc.. 1.0.13 20080320000000.000000 + 000EF323507018400FA0c 090409E. Australia Standard Time(GMT+10:00)03DELL FX09 100100Microsoft Office home and Student 2007129EBBB4792A25B2cement/rpnqAMoiVfYyBHcT87xDgps =81602-OEM-6872912-495884

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.0.6002.18005

  Name: Windows Vista, HomePremium edition

  Description: operating system Windows - Vista, channel OEM_SLP

  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 89578-00146-321-500204-02-3081-6001.0000-1932008

  Installation ID: 004891880816973935038686296695384360376804663620300292

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473

  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475

  Partial product key: B9HD2

  License status: Notification

  Reason for the notification: 0xC004F02A.

  Windows Activation Technologies-->

  N/A

  --> HWID data

  Current Hash HWID: NgAAAAEABAABAAEAAQACAAAAAgABAAEA6GGKtrDb8nu2WWT + iP0sytA18vQa7KjlSOesVswx

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20000

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC                                    DELL                       FX09

  FACP                                   DELL                       FX09

  HPET                                    DELL                       FX09

  MCFG                                 DELL                       FX09

  SLIC                                      DELL                       FX09

  DMY2                                  DELL                       FX09

  SSDT PmRef CpuPm

  That sounds good - you chose the right set of instructions to follow ;)

  Good luck.

• Satellite Pro A120 does not pass the POST

  Hello

  I'm a character 'J' on the upper left side of the screen immediately after the post (power on self test)?
  It will not go any futher.

  I got into the bios and everything seems fine here, I can boot from a cd, but that's all.
  Hard drive turn but not start.

  Any ideas please?

  Hello

  If you are able to access the BIOS.
  The HARD drive is recognized in the BIOS? You see the details of the HARD drive?
  If so, then that would mean that the HARD drive is ok and BIOS can see it.

  I don't know why J appears on the screen
  Have you seen other error messages or notifications?

  You said that you can boot from the CD. Have you checked if you boot the Linux Live disk?

  This doesn t require installation on the HARD disk, theoretically you should be able to start the distribution of Linux.

• Re: Satellite A135-S7403 does not pass the POST after BIOS update

  Hello

  I A135-S7403, I know it's old, but well, I worked until I installed a new version of Bios (1.90 for Satellite A130 (PSAD0U/PSAD3U) on the official website of Toshiba (here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1854878& rpn = PSAD0U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768663).)

  All installed no problem, but when I restart the laptop, it does not start.
  It freezes on screen with red writing "in touch with tomorrow TOSHIBA" and I can't do anything.
  What should I do? And why this official update broke down my computer?

  Hello

  Something has gone wrong with your update of the bios, this is why the Tower cannot start. Also, can you enter the Bios itself?