SRM compatible with ESX 3.5 U4 1.0.1?

Similar Questions

• Are compatible with ESX VM with ESXi VM?

  Hi all I'm new to these forums but I'm stuck on a problem.  I am currently booked in Novemeber do an official course of ESX4 VMWare with the hope of sitting my PCV shortly after.  I'll build an ESX laboratory on 2/3 servers so I can use things like VMotion with the trial version and put several virtual machines using Openfiler as a SAN.  As an ESX license will be too expensive for home use, I will eventally go back to the use of ESXi after my VCP.  Question is if I create virtual machines using ESX they will be compatible with ESXi.  If they are done I have to convert them to work or will they function normally.

  Thanks in advance

  Michael

  Yes, they are compatible - essentially ESX and ESXi are the same just platform it was their management is slightly different - ESX has the Service Console and ESXi does not work - you will learn about it in your class

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• BLADE IBM HS20 not compatible with ESX 4.0?

  Hi all

  2 questions actually...

  1. I have an IBM server with blade HS20 (Xeon 2.8 Ghz) chassi...

  Try to install ESXi 4.0, I had "..." only support 64-bit architecture... »

  check on the Web IBM HS20 site should be 64 bit no?

  2. is there a trick to install ESX on HS20 who do not have a SCSI RAID controller?

  Thank you!

  In fact, it's a hardware issue.  No matter if you were watching ESXi 4.0 and ESX 4.0, VMware supports not either on the HS20.  Regarding your question about CF and remote access to storage (SAN), Yes... you can do it and have been able to do for some time now.  Assuming you are using IBM parts for IO cards, all IBM options (Emulex, QLogic, etc.) are supported by ESX / I have 3.5.  Are therefore all switches in the BladeCenter chassis.

• Vcenter Server is compatible with ESX 3.5 hosts? (mixed mode environment)?

  We run Virtual Center 2.5 and want to know if we update, we still support ESX 3.5 servers?

  Yes. You will be able to manage all 3.5 hosts after upgrade to vCenter 4.0.

  After upgrade, you will see that all guests reconnected automatically.

  Sandeep-

• Formatted VMFS3 ISCSI data warehouses are compatible with ESX5.5?

  Hi all

  I'm currently building an ESX 5.5 environment to run in parallel with my environment 4.1 existing and need the new 5.5 ESX servers to connect via iSCSI to a couple of VMFS3 formatted lun.

  I can't see them via the iSCSI storage adapter, but when I try to mount it asks me to format first. I wanted to confirm if anyone else had this problem or has confirmed that VMFS3 is fully compatible with ESX 5.5 connected via iSCSI.

  Thanks in advance.

  Looks like that the MTU on my NICs is set too high. Once I lowered around 1500, they began to present correct data warehouses.

  Thanks for the help, I think I have a handle on it.

  Thank you, MP.

• VMotion error: host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1 'ecx '.

  Problem: I can't move my Exchange vmserver2 a vmserver1 server.

  Error: "host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1"ecx"

  
  Details:

  Vmware KB:

  * Ensure that the hosts have the same features enabled in the BIOS of the servers. If there is an incompatibility between the servers BIOS configuration even if they are physically identical, they always show a compatibility error message. The two most common to check features are the No-Execute memory Protection (NX / XD) and virtualization technology (VT / AMD - V).

  A ran the CPU utility Vmware as referenced by

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003718

  
  "CPU that have similar features. "This means that the need of processors from the same manufacturer (AMD or Intel), be of the same family (Pentium, Xeon, etc.), and have common features extended between ESX servers involved in the VMotion.

  My results:

  vmserver1 Dell Inc.    PowerEdge 2950 2 Intel Xeon E5405 of CPU @ 2.00GHz
  vmserver2 Dell Inc.    PowerEdge 2950 2 Intel Xeon L5410 of CPU @ 2.33 GHz

  They both share exactly the same characteristics:
  FT support
  Enable VT
  VT Capable
  NX/XD
  FFXSR
  RDTSCP
  SSE
  SSE2
  SSE3

  Support Relaxations:
  NX/XD
  RDTSCP

  Relaxations unsupported:
  All THE features of the SSE
  FFXSR
  CMPXCHG18B

  In the 'Show Windows debug' it reads 'of the compatible CPU"

  This virtual Exchange machine works since Esxi version 3.5.  I am testing now vCenter Server 5.0 with version 5.0.1 on the Esxi server.

  Note: I've also been meeting random uses CPU high, leading from Windows Server 2008 to lock up completely.  I have found no trace of problems within the Windows host and Vcenter is not questions.  I have "reset" of the virtual machine in order to get the server back online.  The CPU to the top lock is random and the server can run for days with no problems. * Don't know if it's related...

  Virtual host config Exchange computer:
  Guest operating system: MS Windows Server 2008 64 bit
  version 8 of virtual machine
  CPU: 4vCPU
  Memory: 10240MB
  Overload memory: 420,61 MB
  vSphere HA Protection: protected
  Host CPU consumed: the 209 MHz

  Maps: vmserver1 watch "CPU is not compatible" CPU: 0% (none of the virtual machine running)
  Consumed host memory: 9823,00 MB
  Active memory of Fords: 409,00 MB

  Views of storage: I have a warning symbol on the QNAP iSCSI disk that hosts the virtual Exchange computer but I see no record... I'm new here...

  I understand that vmotion apply restrictions on the movement of VM compatibility to avoid it.  The components of the HA does not apply to these requirements.  We tested yesterday HA, succsessfully and this how we came to be stuck with the Exchange vm on vmserver2 and it cannot migrate to vmserver1.

  I appreciate your time and consideration,
  Tim

  It seems that you have two different processor speeds. Try the VCA mode and also check the BIOS version you and make sure they match.

• Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I see that this error was mailed here, but can't seem to find a position with a resolution.

  We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

  When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

  If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

  Hey billk.

  Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

  Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

  The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

  Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

• Host CPU is not compatible with the requirements of the virtual machine in the level 0 CPUI register x 1 'ecx '.

  I have a cluster of three ESX servers.  They are IBM 3650 and they are the exact same material bought at the same time.  They even the same exact versions of the firmware (bios, bmc, nic firmware, HBAs, raid, HDD firmware, rsa, etc.).  I started their reclassification of ESX 3.5u3 to ESX4 with all the latest patches.  Then I updated one moved some top vm and upgraded vmware tools and virtual materials without problem.  So, I went and upgraded the following ESX Server and has started moving the machines on that one and upgraded vmware tools and virtual hardware.  I tested the functionality of the ESX servers and they seem to work fine.  I vmotioned machine version 4 hardware virtual machine between the two developed level ESX host very well so I me with the upgrade process.  Then I had to vmotion, one of the virtual machines updated (version 7 of material) between the two ESX hosts newly improved and they won't vmotion.  It gives me the error CPU host is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1 'ecx '.  The full error message is in the attachment.

  Apparently, the virtual machine hardware upgrade exposed a few additional things virtual machine that prevents vmotion to work.  I don't know what and I'm quite surprised because these machines are identical identical hardware and firmware.

  All of the suggestions.

  This is a known unfortunately problem

  http://KB.VMware.com/kb/1011294

• Compatibility of VMware vCenter Server 4 Foundation to vSphere with ESX 3 Standard VI

  We are already use VMware ESX Server 3.5 VI.

  Our intention is to buy VMware vCenter Server 4 Foundation for vSphere addition VI ESX 3.5 Server running on a separate server. Our concern is;

  1. is VMware vCenter Server 4 Foundation for backward compatible product vSphere with VMware ESX Server 3.5?

  2 If no, then is it a similar product of VMware, which is compatible with VMware ESX Server 3.5?

  Please notify.

  VMware vCenter Server Foundation 4.0 can handle up to 3 vSphere or legacy hosts.  If you need to manage more than 3 guests, you should definitely consider vCenter Server Standard edition.

  ESG-VMware

  VMware communities user moderator

• Thunderbolt 2.0 is backward compatible with thunderbolt 1.0

  I have a 2011 iMac which I believe has a thunderbolt 1.0 port. Thunderbolt 2.0 works with this port as well?

  Yes. Devices and lightning 2 connectors are retro-compatible with Thunderbolt 1. Obviously, you will have all the benefits of speed T2.

• Microsoft Office 2011 Mac is compatible with OS Sierra

  I'm still on Microsoft Office for Mac 2011 on iMac.

  Ask yourself if this version is compatible with OS Sierra?

  It is, but you may have to reinstall (MS Office don't like upgrades of a large part of the time)

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• Is compatible with quicken sierra 2007?

  Is compatible with quicken sierra 2007?

  N ° you will need to upgrade Quicken to its latest version.

• IOS 10 is compatible with iTunes 12.2.2?

  My MacBook is old, and the last Mac OS can I run 10.7, which means that the last version of iTunes that I can run is 12.2.2. This allows to work with my iPad without problem from the Air, but never worked with my iPhone IS initially provided with iOS 9.

  The iPad don't often synchronize with my MacBook as it backs up from iCloud, but I wanted to put a few audio tracks on it. I tried today and it does not work. I get an error message "iTunes could not connect to the iPad" * iPad "because an invalid response was received from the device."

  I get the same messages with my iPhone SE. My guess now is the iOS 10 did update my MacBook even more obsolete by not being able to sync with my iPad. I searched around and can't find any configuration required for iTunes for iOS 10, so I'm not 100% it is the case.

  Is there any solution for this? Or is my correct guess, that iOS 10 is not compatible with iTunes 12.2.2?

  In addition, if it is not compatible, if someone has a solution of how to get music from my MacBook on my iPad (I noticed Amazon Music allows me to download tracks and then download them on my iPad, but with a limit) then I would appreciate if you could share!

  Thank you

  I'm afraid you're right. IOS10 requires iTuses 12.5

  As workaround solutions, I'm sorry, I don't have. I'm not a mac I have sync music on.

  But maybe someone else can help you

• How to download IOS, which is said to not be compatible with this computer

  I have IOS 10.7.5 I ordered IOS Mountain Lion, when I try to download it says that it is not compatible with my computer and will not download.

  I would like to still be able to have the IOS on an external drive, how I work around this problem to download the software.

  Thank you

  How old is your Mac? Are you sure if your machine is not compatible with this OS X it can be used on your Mac?