SRM with RDM, PRO using DR using iSCSI and FCoE

Similar Questions

• I am on a trial with Acrobat Pro DC on a Mac and when I try to combine files for example a pdf file and a word doc it says "additional permissions to access to" the word doc, so I have to select a folder and grant access, etc.  It's too long - is the

  I am on a trial with Acrobat Pro DC on a Mac and when I try to combine files for example a pdf file and a word doc it says "additional permissions to access to" the word doc, so I have to select a folder and grant access, etc.  It's too long - is there a way to get around this?

  Hi Alex,

  This is not related to Acrobat, Microsoft, you can see this problem with Microsoft Word is known: grant access file: cannot open the document: user - Microsoft Community it is a sandbox application. It restricts user with several workflow.

  Unfortunately, there isn't much we can help at this stage.

  Kind regards

  Tariq Dar.

• How to configure rdm to use iscsi lun in a virtual machine using ms iscsi initiator?

  I have equallogic SAN attached to a cisco 3750

  switch. It comes to our storage network.

  Within the virtual machine for all readers of data other than my c:\ that has the operating system I would use iscsi data switch that has 4 network ports on four different nic cards already assigned.

  According to what I read a virtual machine can use only 4 nic so I have a Production network the other three that I would

  Use it for iSCSI data.

  Three ports of each virtual computer network for using ms iscsi with MPIO

  initiator.

  I have already attached the RDM using esxi 3.5 as a physical mapping of RDM.

  My question is how to configure the ports of the network adapter in the virtual machine?

  The VM network is on 172.19.2. * where iscsi is on 172.19.21. *.

  What would be the entrance on the network adapters in the virtual machine that is running ms win 2 k 3 r2 x 64.

  Thank you.

  ESX / Configuration / networking

  Propertties (near vSwtich3).

  On vSwitch object / change

  NIC Teaming tab.

  Menu of load balancing.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• 7525 HP: PRINTING ENVELOPES WITH MACBOOK PRO USING HP7525

  I'm trying to print envelopes of invitation with my HP using MacBook Pro 7525.  I tried the main tray, but I get an error message about the Photo tray.  I'll cancel the print job, and then try the Photo tray, but the envelope comes out without printing.

  Thank you

  If another program does not work, here are a few steps to try, in order:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Install the complete driver here: HP Photosmart 7520 e-all-in-one printer full feature software and drivers
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers

  I have check the specifications of printers and A2 is a supported format.

  

  Good luck!

• 70 d EOS will pair with MacBook Pro using ad hoc network.

  Matching infrastructure (Airport) worked well.

  Matching via ad hoc network, failed however. Twinning on the Mac starts OK and recognizes the 70 d. When the camera is turned on, the window appears advising to follow the instructions on the LCD for 70 d. However, screen gets stuck on the message of pairing process and the small symbol of antenna radiating on the screen of the LCD monitor (on top of the camera) flashes indicating that he expects a connection.

  Utility EOS 2.13.20.0

  Mac OS X 10.6.8

  70 d 1.1.1 firmware

  The problem was with the:

  EOS 70 d (w)

  Wi - Fi function

  Operating instructions

  provided with the camera. The instructions to set up an ad hoc network are not at all clear and left quite confused me.

  I turned instead:

  EOS step by step installation Guide

  Wireless file transmitter

  EOS Utility Mode

  Infrastructure or ad-hoc networks

  Mac OS x 10.5 - 10.6

  Although some different menus, (e.g. 70 d lack of network Assistant)

  This guide is a model of clarity, and I was able to successfully adapt its instructions to my situation.

  Has worked the first time like a charm.

  Canon take note.

• Best editing for Adobe Premiere Pro using laptop and external drive

  I'll confess that I'm not a particularly technical person. But I am learning!

  So I want to ask a simple question and hopefully get some good advice.

  I'm editing a feature-length documentary on Adobe Premiere Pro. I have a lot of HD footage, and I want to optimize my drives to optimize performance. To that end, I recently bought a StudioRAID 4 to glyph.

  I currently work for a Mac Book Pro. I use Mac OS 10.9.5.

  Processor: 2.66 Ghz Interl Core i7

  Memory: 4 GB 1067 Mhz DDR3 (2 GB 2 benches)

  I searched a bit on how to better implement my discs, getting some useful infor here: https://forums.adobe.com/thread/662972 and here: https://www.video2brain.com/en/lessons/optimizing-hard-disks

  But there is a little too much information - and I'm getting lost. Use a 2 disk configuration tips? Or should I partition my drive of new glyph and use the 3 disc mounting configuration.

  I'd appreciate certainly all of the tips!

  Thank you

  Rebecca

  partition the disks will not help and will not change readership by this ranking. better performance would use raid-0 on the StudioRaid of glyph and 2 disk configuration in the table. Make sure that there is a backup of the raid, in case something happens.

  also 4 GB of ram is dangerously low, you can upgrade to 16 gb.

• Failback when using Etherchannel and FCoE

  I have an environment that I am able to dig in for the purposes of learning, but I can't it.  Since I can't make any changes to the environment and experience, I wanted to ask a few questions here.  I'm trying to figure out what that the failback option of virtual exchanges must be defined on when using FCoE and etherchannel.

  The environment consists of:

  • FCoE
  • 2 cards of CNA
  • EtherChannel
  • vPLEX
  • Cluster of metro
  • Nexus 5000

  
  Each host connects to a single vDS and each portgroup is configured to use:

  • Load balance policy: route based on the hash of the IP
  • Active uplinks: two 10 GbE CNAs
  • Eve & uplinks used: no
  • Physical switch is configured for etherchannel.

  
  

  The vSphere networking 5.5 guide says the following for failback on vDS trade option:

  
  

  Failback Select Yes or no to disable or enable failback. This option determines how a physical card is returned to active duty after recovering from a failure. If failback is set to Yes (the default), the adapter is returned to active duty as soon as their recovery, moving the daughtercard, which resumed its accommodation, as appropriate. If failback is set to no, an adapter failing has been idle even after the recovery until another active adapter fails, requiring a replacement.

  
  

  This evokes the assets & Eve links and since using etherchannel requires that all active links with no standby connection, this means that the restore option does not apply to etherchannel configurations?  Or applies to the way in which the load is re -distributed when a link comes back after having been conducted? 

  
  

  For example, that we have a portgroup with two uplinks (uplink1 & uplink2), load balancing policy, the hash value of the IP and physical switch ports are in an etherchannel configuration.  During the normal operation of the IP of the hash calculations (http://blogs.vmware.com/kb/2013/03/troubleshooting-network-teaming-problems-with-ip-hash.html) are made and the load is distributed across the two uplinks.  Let's say the physical switch that connects uplink2 in goes down.  The ESXi hosts connected to that vDS immediately come into uplink2 equation which means uplink1 would only result in the calculation of hash IP?  What is the impact of the automatic restore option when uplink2 is back?  If failback is set to no, uplink2 still wouldn't be in the equation?  If so, how you would get it back in the equation?  Or when the link is up is immediately shot down there regardless of the restore option?  It feels like I'm missing something here. 

  Also, I read that attributing no failback is recommended when using IP storage, because it can lead to port heartbeat that can cause performance issues with the storage.  But I also read that traffic to an etherchannel appears as a single MAC/connection address.  This recommendation apply in an etherchannel configuration?  Are port and MAC stir the same thing?  Or is beating port just at the moment where the link goes up and down and MAC beat is when the MAC's switch between two ports?

  Sorry if these are fundamental questions, but not being a networking guy and not being is not able to experiment makes it hard.  Thanks for any help.

  The Member State of the binding not arise unless the link is established on both sides.

  I agree with the statement portfast. All the links go to an ESXi server do not participate in spanning tree protocols. The goal is to transition to a State of transfer immediately on the link turning upward. This must be paid regardless of the use of an OFFSET.

  LACP will dynamically build the GAL and validate the configuration on both sides is correct. I prefer LACP (dynamic LAG) on any static sort of LAG, but this requires a switch on the side of vSphere distributed. If you have the VDS, using LACP. However, LACP does not solve the problem of covering tree (you still want to avoid using tree covering weight on the SHIFT going the ESXi host).

• RS 5 with netapp SRA, FCOE site iSCSI with RDM

  Hi team, could someone please help to veify if it works in this scenario.

  We have PROD site running vmware vcenter 5.0, esxi5.0, SRM 5.0, Netapp 3210 ONTAP8.1 version file server. The VMs are windows Server2008, MS SQL2008 as major DB. Virtual RDM database files. Only FCOE for this site. AD is a physical Server 2003. The rest are virtual machines

  We offer you to have SRM for DR site deployment. The DR site is synchronized with netapp SRA snapmirrror, controlled by the console SRM5.0. Recovery site has no FCOE, only iSCSI and NFS license availble. Always RDM but using iScsi. vCenter 5.0, 5.0, netapp ONTAP8.1 2040 esxi.

  My questions are:

  1. If VMware SRM support DR failover for this case with the different protocol, PROD is FCoE, iscsi DR

  2. If the SRM supports failover with RDM in our case

  3. If the AD DR Server site need to be installed as a new best practices, or we will have to use SRM to switch production announced on website of Dr. What is recommended.

  4. If the physical AD can be kept as the common way and always taken SRM supported

  5. to the recovery site, which is the best practice? To use NFS to store data and iSCSI for iscsi? Or store data and RDM using iSCSI LUNS to simplify?

  
  

  Thank you!
  

  1. Yes
  2. Yes
  3. I would recommend if possible having a domain controller AD, already running on the DR site - it may be a virtual machine
  4. Yes, the PROD site domain controller can be physical
  5. I'd keep all compatible iSCSI so so -.

• ISCSI and FC SAN VI 3.5

  Hello gurus!

  I have a VI 3.5 with FC SAN environment, but now we need more hard drive space. I think the use of ISCSI SAN, but some people says that it is not correct (unstable) to use ISCSI and FC SAN in the same environment.

  What do you think of this?

  Thank you!

  You can always have FC, ISCSI and NFS presented to the same ESX Server, it will not come into conflict each other as long as you do not present the same logic of FC and ISCSI each unit number.

  Craig

  vExpert 2009

  Malaysia, VMware communities - http://www.malaysiavm.com

• Cannot use iMac 27 mid-2010 - yosimte - display target with mac pro 2009 - maviricks - well that I use the mini display cdmi Caron

  I have an imac 27 inch, mid-2010 and I'm trying to use it as screen target with mac pro 2009 and I do the step open two computer connect with cable - hdmi - mini display but has not detected

  I have mac with os x yosimete and mac pro have the mavericks

  According to the use of your iMac as a display with the target - Apple support display Mode, it requires a 'Mini DisplayPort to Mini DisplayPort' cable.

• Question about the use of recovery disks Vista Bus on T500 with XP Pro downgraded

  I searched to see if this has been addressed already and I don't see anything about it. I also looked through the Lenovo support site and could not find any documentation with specific information, that I'm looking. So, if all goes well, the people here will have an idea.

  I have a T500 which was ordered with retired on WinXP Pro. It also came with a set of Vista Business (four discs) recovery disks. I plan to get my machine with Vista business records and down XP Pro, but I had a few questions.

  1. as it currently stands, I guess that the R & R partition that is on the HARD drive at this time restoring a WinXP Pro system if I start and get back with her. Is this correct?

  2. If I boot from the recovery disc Vista Business and use it for the recovery of the system, it creates a new partition 'Factory' R & R which would incorporate a Vista Business install?

  I may be wrong on my assumptions and even after the start of the R & R partition, it is really the recovery disks that I choose to use that would dictate if I found myself with a XP or Vista Bus. System.

  For what it's worth, I created a set of recovery disc R & R for the installation of WinXP Pro in case I need to revert to this version.

  I hope that my question is logical and that someone out there has an answer for me.

  Thanks in advance!

  jskang, welcome to the forum,

  Yes on both counts.

  Removal of all the hard drive recovery disks, create the service partition and then the system installs from the recovery with the flavor of windows partition, so that the discs are.

  It was a good idea to create the XP discs.

• I have an older version of elements with I could use on my PC, I just bought a MacBook Pro and want to install it on MAC I can't find a place to download vs 13 Please help not wanting to upgrade to 14 again

  I have an older version of elements with I could use on my PC, I just bought a MacBook Pro and want to install it on MAC I can't find a place to download vs 13 Please help not wanting to upgrade to 14 again

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  In the preferences, select scale to frame size and then any media imported after the modification will be automatically resized to fit your sequence.

  Thank you

  The f

• Is anyone using slides and inkjet with iPad iPad Pro or current Air2?

  Larger than Pro iPad seems to be perfectly suited for use with ink & slide but Adobe and tutorials website lists the old model iPads as "compatible"?

  Is anyone using side and with great ink jet (8 "x 10") iPad Pro?

  If so, what apps do you use ink and slide with this larger unit?

  I've tried the original apps (using my fingers, only), and they work but are buggy on the iPad Pro.

  I am also interested to hear if anyone uses ink & Slide with the current iPad 2 Air?

  I checked the auditor of the model number of Adobe compatibility for both of the above, and it is said that they are NOT compatible?

  Ink and slides have been abandoned or will be updated apps and work with the iPad models currently available in the future?

  Thanks in advance for all help with this!

  Hey digeratti,.

  Unfortunately, the ink & Slide is not completely compatible with either of these models. I apologize for the frustrating experience, I know that's not what you wanted to hear. Regarding the iPad Pro, the best pen to use would be the pencil of Apple with the sketch in Photoshop or Illustrator to draw. I see that you have indicated that you are experiencing bugs when you just use your fingers. Please let me know which bugs you encounter when you use the key entry instead of a stylus.

  Thank you!

  -Kathleen

• can I use a mixer with premiere pro cs6?

  I have the first pro cs6 and wonder if I could use a mixer with premiere pro cs6?

  Hi Sindrekdn,

  I have the first pro cs6 and wonder if I could use a mixer with premiere pro cs6?

  No, surfaces of control (like the mixture of boards) did not support until the Premiere Pro CC sorry!

  Thank you
  Kevin