SRP521W Advanced Firewall Bug?

Similar Questions

• SRP547W cannot create advanced firewall rules

  Hi everyone, in advance, I thank you for your help.

  I have a SRP547W that I have configured the following:

  LAN 192.168.15.1/24 VLAN1

  LAN 10.10.10.1/24 VLAN10

  LAN 10.10.2.1/24 VLAN100

  ADSL PPPOE

  Software DMZ goes to 10.10.10.x and another at 10.10.2.x - it works OK

  Now, I want to use the advanced firewall features to block all ports except those that I need that software DMZ forwards everything.

  When I try to create rules I get message "values are not valid" no matter what I try.

  I want to create explicitly authorizes the rules, followed a refusal of any rule for each IP addresses used for DMZ software

  I thought I should do like that? Can you please confirm? I have the good for the IP of Destination address subnet mask? Or should it be 255.255.255.0? It does not make a difference anyway

  Details of the strategy
  Name	Value
  Source IP address	0.0.0.0
  Source subnet mask	0.0.0.0
  Destination IP address	10.10.10.x
  Destination subnet mask	255.255.255.254
  Protocol	Any
  Source port	Any
  Port of destination	443
  Action	Permit
  Annex	Every day
  Times	24 hours

  Thank you!

  Hi Jai,

  First of all, I would recommend that you upgrade to the current firmware posted on Cisco.com - that's what I tested with earlier and it worked.

  So assuming you have two entries of DMZ software, lets say:

  1.1.1.165-> 10.10.10.100 and

  -> 10.10.2.100 1.1.1.166

  Create rules as follows:

  1. from WAN1 to LAN10, source dest proto anything sport TCP dport 443 10.10.10.100/255.255.255.255 0.0.0.0/0.0.0.0

  2. starting at WAN1 to LAN100 source dest proto anything sport TCP dport 443 10.10.2.100/255.255.255.255 0.0.0.0/0.0.0.0

  3. from the WAN1 to everything, 0.0.0.0/0.0.0.0 10.10.0.0/255.255.0.0 any sport proto dest source any dport all refuse

  Ensure that the priority of the rules are in this order.

  See you soon

  Andy

  Sent by Cisco Support technique iPad App

• Advance firewall in Windows 7 does not work

  Hello I am using Lalonde with home premium Windows 7

  I have previous questions on install NetFramework, and then advance firewall option cannot be opened:

  MMC could not create the snap. The snap-in may not be installed correctly.

  Name: Windows Firewall with advanced security.

  CLSID:FX: {b05566ac-fe9c-4368-be02-7a4cbb7cbe11}

  I tried to add snap-in window firewall but gave the same error.

  I uninstalled Northon completely; UpToDate Micorsoft essential security and works very well.

  Thank you for your help.

  Hello

  1. Since when are you facing this problem?

  2 are there any changes or updates made on the computer?

  3. have you used the Norton removal tool to uninstall Norton from the computer?

  Method 1:

  I suggest to create a new user profile and then check if the problem persists.

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.
  Reference:

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.
   
  If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.

  Reference:
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 2:

  If you have not used the Norton removal tool to uninstall Norton from the computer, I suggest to see the link and try to run the tool.

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Satellite A300D-216: NOD32 firewall blocks certain applications

  Hello support, I have a little problem with my laptop.
  I have a Satellite A300 216 with Win7-32, NOD32 Antivirus, all the original Toshiba drive.
  The problem is the following:

  1, when I try to open certain programs that work here at 90% of the attempts that I get a message that they have been blocked by the firewall or antivirus software.
  Disable all anti-virus and firewall to be able to launch them, but block their the same and always gives me this message before.

  (2) I close the error of the browser window download the updates (up to now, everything is fine, it does when I close the program), but the output error sudden that the page is locked or servers and offline. I tried to change the browser firefox, flock, IE9, Mozzila, nothing to do.

  Since my son's PC, everything is normal programs to open, does not give me the error of server or internet pages and he has a Toshiba laptop with Win7.
  64, but with more than 2 years

  Can you help me find where to fix or eliminate this problem?

  Translated from Italian into English by google

  Hello

  Play with the settings of Nod32, you can find it in the advanced firewall settings:

  http://img253.imageshack.us/img253/1929/setting.jpg

• Windows 7 firewall allows 1777 proinstaller, 449, 976

  My Windows 7 firewall allows proinstaller 1777, 449 and 976 through. What do these?

  Thank you

  Laurent

  [Original title: proinstaller1777, 449, 976]

  Where are you seeing this?

  It displays a pop up or message to ask for permission to connect to the firewall?

  Do you see it advance firewall setting?

  It is probably application that try to communicate.

  You might find the application and see where it is located or check programs and features and uninstalled program, check if it is displayed or not?

• New Satellite C850D-11 q SYSTEM_SERVICE_EXCEPTION

  Hi, can someone help with the problem annoying fricking

  I get a blue screen with the error,
  SYSTEM_SERVICE_EXCEPTION
  Usually its when I'm on ebay or a similar site.

  PC world has changed the computer laptop and do it again. I can't take another laptop to the store.

  IV used windows update and all up to date.

  Thanks in advance

  [Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION | http://msdn.microsoft.com/de-de/library/windows/hardware/ff558949.aspx]

  
  
  1. download and install the updates and device for your computer from Windows Update drivers.
  2. scan your computer from computer viruses.
  3. check your hard disk for errors.

• How can I tell if I have spyware or malware on my laptop HP Vista basic?

  I ran Spybot and others. It's deep.  A person that I will refer to visited web pages.  The person has not been to my house within months and has no key remote access of its past.  I ran command and netstat but really don't know what I'm looking at.  Yesterday at 12:50, I run gpresult /r and he said: the last time gp applied was at 12:20.  Today, after the connection, I checked again and he always showed 12:20.  I have no idea if this is related or not.  I did the thing in Control Panel for the ways of managing remote access and reduces to the minimum the exceptions. (these measures months ago)  I still have the same problem.  I believe it is a type of monitor 1 program that sends everything I do at their location.  I could reformat dsk and reload the OS.  But, how can I reload my data without infection.  This is I think he came in an e-mail.   I downloaded all the mail of flash player.  How could sift through the mail to see which it came?   I'm not involved in anything illegal.  It's a matter of principle.  It comes to privacy.  I am a student of hungry and have no funds to make this machine somewhere.  My cards and bank information of credit to say the least.   I want to do what I have to do to restore my privacy.  Cable or wireless - the same results.  If you have any questions for me - please do not hesitate to ask or if you want to set up something to share.  Thanks in advance.

  You probably have a hidden Trojan and keylogger on your system.

  You will need to perform an analysis offline of the virus (which means you must search for the virus without running Windows) this method allows to detect hidden viruses.
  You can use Windows Defender offline for USB or CD to perform the analysis
  Or you can use AVG Rescue CD
  Once you download the one you want to use, you must burn the ISO to a CD using ImgBurn.
  Then once you have offline anti-virus or USB disk, restart your PC and press delete and go into your BIOS settings. From there, you need to get your start parameters, and you need to change the drive of CD-ROM or USB device first starting and restarting your pc.
  Then start the disc/usb anti-virus software and run a full Scan.
  To avoid back and monitor outgoing and incoming connections, you can install an advanced firewall tool as ZoneAlarm.

• WRT160N question. I'm about to blow my brain.

  OK, so let me give the backstory.

  We use this router for a small business. We went to one of our branches. I will refer to this location as the location #9.

  Anyway, we went to #9 with intentions of the installation of a Sonicwall, which is a router/firewall. Until we installed, we have currently implemented with a WRT54g. They have cable internet. Thus, cable was going on to the modem, which is then connected to the WRT54g. We had a server, a PC and a cable of thin client for the WRT54g. We also used the wireless capability to allow access to their e-mail and internet on their laptops wireless #9 doctors. Everything worked very well.

  So we get there to install the sonicwall, remove us the WRT54g and use the sonicwall as our new router. We hard the computer and the server directly connected to the sonicwall. We use the sonicwall as our default gateway at 192.168.9.1. We have set the static IP and entered the DNS of the computer and the server settings to ensure that they can access the network/internet. The PC and the server are running perfectly well. The WRT54g is no longer used. Is no longer in the picture.

  Now... This is where it becomes stupid. We have also wired a new WRT160N router in the sonicwall. We have an ethernet cable to port 5 of the sonicwall, port 1 on the WRT160N. Wireless, this little work. I can access the network, BUT I CAN NOT GET INTERNET to WORK wireless at ALL. I even wired a computer for the WRT160N and that worked perfectly well, but as soon as I remove the electrician, I can connect wirelessly, but not Internet.

  Within the WRT160N, under Setup, it turns on automatically configures DHCP. I was on the phone with Linksys for hours yesterday trying to get this resolved, but unfortunately... nothing. The WRT160N IP is set to 192.168.9.2. The daughter of linksys had me disable NAT in advanced routing and she had me also to disable the DHCP server in the setup. They already drove me by cloning a MAC address, but that shouldn't be a problem. I wouldn't have to clone the MAC address of each computer that want access to wireless internet.

  Someone help me please. I tried to fix this for a week and it costs me a lot of time and money.

  If I need to provide more information, I can do it easily.

  Thank you.

  Thanks kevj. I finally thought to it.

  Within the Sonicwall, I had to specify a DHCP scope, and then I had to enable LAN and DMZ DMZ LAN in the advanced firewall settings.

  This corrects the problem, and finally I can stop losing hair on this problem. I'm already declining, I need more help with that!

  Once again, thank you kevj for pointing me in the right direction.

• IE 8 does not connect to internet

  I've looked through the different answers here and couldn't really find something that takes care of my question.

  I have never really used IE and I only found it does not work, because one of my games cannot connect to patch (Age of Conan).

  Someone on the Forum game suggested that it deals with Internet Explorer. I am able to connect to the internet using Firefox very well and have no problem using Windows Live Messenger.

  My OP is Win XP. I checked my firewall and added some AoC and IE as exceptions. I also checked everything under the advanced firewall settings (FTP server, Web server, etc).

  This is the part of the IE Diagnostics log.

  HTTP, HTTPS, FTP connectivity

  Info	HTTPS: Successfully connected to www.microsoft.com.
  Info	FTP (passive): connected to FTP.Microsoft.com.
  warn	HTTP: Error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn	HTTP: Error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  error	Could not make an HTTP connection.
  Info	Redirect the user to support call

  So, how to connect with IE? My internet works fine, is not just IE.

  Any help is greatly appreciated.

  Edit: I'm on cable internet and I use a router. I did have problems patching the game before.

  Thank you, Lorien. I used your 3rd suggestion and ran the Microsoft fix it solution that resets all my IE settings and everything works fine now!

  I appreciate your help and your quick response!

• Deleting the entry of WF authorized programs

  There are 7 elements of a program that I uninstalled still listed in the programs allowed the Windows Firewall.  I unchecked against them, but I am unable to remove them because the button Delete is gray.  How can I do this?

  Thank you

  Hello

  If uninstall you the program and uncheck the authorized leave him alone he is just "cosmetic."

  I like the beautiful "cosmetics" too, but there is a limit to what is interesting to do for her.

  You can try one of the more (but be very careful).

  Make Control Panel / Administrative Tools / Windows Firewall Advanced and see if you can get rid of it using interface of advanced firewall rules.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• ACL configuration to block messenger

  Hello

  I have

  Model:	SRP527W, ADSL2 + annexed, 802.11n ETSI, 2FXS/1FXO
  Product ID:	SRP527W-U-E-K9

  I need to block Yahoo and MSN messenger by using advanced firewall or ACL.

  Thank you

  Simon Yee

  You can use the ACL in router to block MSN and Yahoo, you can also block other sites such as facebook.

  Messenger:

  access-list 102 tcp refuse any any eq newspaper 1863

  access ip-list 102 permit a whole.

  Facebook:

  access-list 1 deny 69.63.184.0 0.0.0.255

  access-list 1 permit one

  Yahoo:

  access-list 10 deny 98.139.183.0 0.0.0.255

  access-list 10 deny 98.138.253.0 0.0.0.255

  access-list 10 permit any one

  If this answer is satisfactory to you, please mark it as response.

  Thank you

  Greetings, Johnnatan Rodriguez Miranda

• Cannot print to a network printer after Windows 7 64 bit upgrade

  I've recently updated one of my new PC from Vista Home Premium 64-bit of Windows 7 Home Premium 64-bit.
  Since then, I not was able to print on my network printer, an HP Photosmart C7180 all-in-one, which is wireless on my home network. When this PC is Vista, I was able to print. Two other computers on my home network, both running XP, can access the printer on the network and printing.  This PC now on Windows 7 64-bit can find the network printer when I "Add a printer -" and I am able to complete the installation of the printer.  I downloaded and installed new drivers for the HP C7180 from the site Web HP specifically for Windows 7 64-bit, so I have the latest drivers.
  I have NOT install the printer as a device shared on any of the computers, but rather want to be able to print from any of them, even if other computers are offline.
  If I open and leave visible the print queue for the printer and then print a Test Page, I see the print job briefly showed the 'Impression' in the display of the print queue, but nothing ever reachs the printer. There is no message error, either during the process of adding the printer, or when sending the Test Pages, or other print jobs to the printer.
  I have McAfee antivirus and firewall installed on my PC. Advanced Firewall setting for networks shows that the range of IP addresses for all my IP addresses are approved.
  (I spent hours to reinstall the drivers and remove and reinstall the printer and spent a frustrating 2 additional hours with the help of HP without success. Any suggestions would be most appreciated.)

  Is your computer 7 32 or 64-bit?

  Go to the HP website and download the Windows XP driver for 32-bit or 64-bit (depends on the version you have)

  Right click on computer

  Click on manage the

  go to Device Manager

  right click on your device unknow (HP printer)

  Click on set to update driver

  Locate the *.inf you downloaded Epson (32 or 64-bit)

  Install the WinXP inf driver

• ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

  My printer model:

  HP PHOTOSMART ALL-IN-ONE 5510 B111A

  Problem:

  Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

  What I've tried so far:

  I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

  I've seen people questioned on this issue before and there is no solution. I really need help from HP!

  After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

  1. find your PC's DNS servers by typing ipconfig/all in CMD.
  2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

  To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

  3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

  4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

  5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

  6. change your standard channel to 6.

  7 find the wireless security and replace your WPA-personal security mode.

  8 disable UPnP

  9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

  10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
  I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too

• NSX and DMZ

  I currently have firewall NSX distributed controlling East-West traffic and using security groups to define where traffic can and cannot flow.  I currently have a physical firewall which is currently used to set my DMZ.  If I want to spend my DMZ zone so that it is defined by the NSX, how traffic between internal VMs not in the DMZ and internal VMs in the demilitarized zone are isolated?  It will flow through the perimeter firewall, or is it only separated by the distributed firewall and security groups?

  As a general rule, the edge device serves North/South gateway and firewall.  There are many approaches that can be taken:

  While the physical world is often based on physical separation, NSX allows to build an environment apart from DMZ using micro-segmentation services and advanced firewall to limit and control the flow of traffic, accomplishing the same goals achieved by traditional approaches of physical separation with the physical firewall.

  Of course, security administrators can take time to adapt to this new model of cloud of the demilitarized zone has collapsed and may still require a certain level of separation.  It is not uncommon to create a DMZ off interfaces connected directly to North-South edge device maintenance traffic.

  Components of the NSX can be configured in many ways to facilitate the physical and logical isolation.  Areas of transport can be used to ensure that the networks protected from VXLAN reside only on specific hosts.  Logical switches can be created according to the application profile, and based on rules set up to ensure the logical switch.  It is even possible to place all virtual machines on the same logical switch and apply rules to the level of the virtual machine or group.  Whatever the approach, the rules will result in the same level of security.

• ESXi 5.0 is having disconnected the VC frequently

  Hello

  We use Vsphere 5.0. We have seen in one of our vcenter that esxi is disconnected again and again.

  We have done the troubleshooting on this issue below.

  (1) control access to the network of VC. Found ok.

  (2) check the availability of esxi. Search ok.

  Still, problem that happens.

  Please help me if anyone has the solution for this.

  Hello

  Check the KB, hope this will help solve the problem.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2040630

  Also check port 902 permit vCenter server advanced firewall settings.