Windows 7 firewall allows 1777 proinstaller, 449, 976

Similar Questions

• There are no programs listed in the exception list allow programs and features in the Windows on Windows 7 firewall

  I try to add a program to the Windows Firewall exceptions list. When I go to control configuration\systeme and Security\Windows Firewall\Allowed programs, I discovered that there were not all of the programs listed.

  If I click on the "Edit settings" button, it becomes grey and nothing happens. I am the Admin so I should have access to it. When I click on the button "Allow another program", any program, I am trying to add will give me an error message saying "firewall cannot add Windows ' [program]" to the list of exceptions.

  This has happened recently. I was able to add programs to the list of exceptions before.

  Thanks for the reply.

  Run a place upgrade to repair your operating system

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099

  Note: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Please follow these recommended steps and post if you still experience the problem.

• Windows 7 firewall rule to allow only a predefined range of LAN IP Communications?

  Hello

  I'm new to working with the Windows 7 firewall.  I want to create rules that will help my office computers laptops only can communicate with some computers on my LAN - those whose IP address of 192.168.10.50 to 192.168.10.55.

  When comments computers connect to the network via ethernet, they would get an IP address outside this range and I don't want the hosts to be able to see or communicate with desktop computers and vice versa.

  I created the inbound rules and outbound for tests that denies everything outside this range of IP (extended tab has the range specified in the remote zone "IP address") and it seems to work.  For the "local IP address" I chose "any IP address" - the documentation says: "select this option to specify that the rule matches a packet network for any address as the local IP address. The local computer are always consistent with the rule when this option is selected. »

  Have I set it up properly?

  Thank you.

  Hi Sysadmin,

  Thanks for choosing Microsoft Community! However, the question you posted would be better on the TechNet forums. Please post the question here:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Windows 7 firewall, just after the power rules

  Hello

  Setting up a private workgroup-to-peer network (not homegroup, no servers or domain) of several PC windows 7.  Have all network connections, defined as 'private' of networks.  At that time, the private firewall is disabled, and the Public firwall is enabled.  Administration tool using remote third 3rd RAdmin connect and control the PC.

  Strange behavior just after turn on/off the PC.  Can ping from one PC to another, but RAdmin tool fails to connect to a PC on just.  The 'Public' windows firewall log shows the RAdmin TCP packet dropped.  Once someone has logged on locally to the computer and then connected to the wide, the RAdmin packages are no longer considered (fell or permitted) by the Public firewall, and the RAdmin progam works great.

  I added a test rule to allow all TCP traffic through any firewall from any PC, any user, any port, etc. (essentially large open) and still have the problem where RAdmin specific TCP packets are lost by the Public firewall.

  I can get it to work by setting the 'incoming connections' for the Public firewall to 'Always allow', but is not an acceptable solution.

  I worked with the provider of 3rd party s/w (famatech) and they also have no idea why it works this way.

  Any ideas how the Windows 7 firewall works right after that the PC is on, but before the user login?  Any ideas how can I do an acceptable firewall rule which will be in force after powering on, but before that the user log?

  Thank you in advance for any help or any other ideas,

  Rick

  Answered my own question.  Found that a set Local GPO do not merge rules defined by the user.  When I moved the RAdmin rule throughout the local Group Policy object, problem goes away.

• How can I make Windows 7 Firewall does not mark VMNet1 and VMNet8 as public

  I want to use the DLNA (Digital Living Network Alliance) media streaming on my home network and VPN connections.  I need these features in my Windows 7 Home Premium 64 bit guests and clients Ubuntu.  Windows 7 firewall cannot determine enough about VMware network adapters, the labels 'unidentified' and public brand!  Perhaps it is because I am visually impaired and use screen readers, but I'm not able to define these connections as private or disable the firewall for these connections.  If I disable these adaptors or uninstall Workstation, these features work perfectly.  Of course, this will not allow these characteristics never to work in a guest and is not a viable solution for the Windows host either.  Does anyone have a solution to know how to enable VMware networks bypass bad decisions of Microsoft network design?

  Take a look at: Troubleshooting blocked incoming network traffic on Windows Vista or later after installing a VMware product

  I would like to use the instructions in the section "redefine the NIC virtual VMware as endpoint devices ' VMware KB article.

• Windows XP firewall blocks FTP

  Recently, I reformatted my computer and reinstalling Dreamweaver and now Windows XP firewall blocks my FTP access. If I turn it off, it connects. I had it before. I remember there were some things that I had to add to let it connect. I allowed Dreameaver in the list of programs and port 21. Is there anything else I can try?

  Here's what I did to remedy. Where others have connection problems. Norton Antivirus blocked alg.exe which is a Microsoft process that should run.

• Would Windows 7 firewall functions if I uninstall McAfee?

  My PC is l670-1john family windows with MacAfee install by default

  I have never activate MacAfee.
  Windows firewire is controlled by MacAfee
  Firefox is block by firewire, I check configuration of firewire. It seems ok.

  If I uninstall McAfee windows firewire will be functional?

  Thank you

  Hello

  Yes, Windows 7 firewall is an internal function that would be always available even if McAfee would be uninstalled.
  You can also enable or disable the firewall from Win 7 following way:

  1. open Windows Firewall by clicking the Start button, click on the Control Panel, clicking Security, and then click Windows Firewall.

  2. click on turn on or off Windows Firewall.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on (recommended) and then click OK.

• Can I download a copy of Windows XP and allows to activate my product license

  I have a Dell Precision 380 opportunity with Windows XP Professional, which was already installed. I have produced key but no disc and can not get windows to run right or internet page explore wants same load. I can download a copy of Windows XP and allows to activate my product license (I need to read the original CD and not any copy)?  If not, can I use to reinstall an authentic copy of Windows XP (since I was a valid product license) without having to buy a new version of Windows?

  No, it is not downloadable.
  The person who gave you the PC should have provided the disk. Otherwise, you're out of luck, unless you know somone who has the same version of the OEM Dell software that you can borrow.

• Windows do not allow utility windows to extract to open images by e-mail.

  He always tells me that windows has blocked potentially dangerous files, but because I emailed them myself, I'm sure that I trust the sender.  However, it won't let me "unlock" them until they are saved as files and unzip them, I can't SAVE.

  Original Tilte: I sent 12 pictures from my cell phone. now windows will not allow the extraction utility windows to open.

  Hi Wyndechilde,

  ·        You use Internet Explorer or e-mail such as Outlook or Outlook Express clients to download zip files?

  ·        Who is the e-mail account that you use?

  If you save a compressed (.zip) file that is attached to an e-mail message to your hard drive, the Web content zone information is also saved when you save the compressed file. When you try to extract the contents of the compressed file, or if you try to run a file, do not. The Web content zone information are saved with the files only if the drive uses the NTFS file system.

  You can open a blocked file from a known source if you wish. To open a blocked file, follow these steps:

  a. right click on the blocked file, and then clickProperties.

  b. on the arencontre tab, click on unlock.

  Access the link below for more information aboutAttachment know Manager which is included in the Microsoft Windows XP Service Pack 2 (SP2) and how the Attachment Manager handles different file types.

  http://support.Microsoft.com/kb/883260

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Firewall: Uncheck basic network layout would make my computer more secure on the Public network?

  I use the Public network a lot.  I noticed that on my Windows Vista firewall, Core Networking is checked on by default.  Unchecking it would make my computer more secure on the Public network?  I already checked in my firewall settings, block all incoming connections.  Regarding security, I run MSE, like Spyware Blaster in the background.  Automatic updating and Malware Protection are on.  My other security settings are OK.  I do not understand why Core Networking is checked on by default.  This would make an open port, right?  Unchecking it would make my computer more secure?  Thank you.

  Hello

  If you uncheck Core Networking IPv4 and IPv6 will be unreliable or blocked.

  You have a router, a firewall (today, most have them) which is excellent protection
  for your network against external influences. In addition, Windows Firewall.

  Windows Vista Networking-
  http://TechNet.Microsoft.com/en-us/library/bb742618.aspx

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  Hope these helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows comodo firewall v - what is the best?

  I heard that the windows firewall is not very good compared to as comodo and protects against incoming traffic. I have also been informed that it tends to have be restarted whenever a system is restarted. Is this true please.

  HitBit

  Hello

  Not those who are not true.

  Low-cost 3rd part firewall software are quite a lot of problems delayed. They are all
  have compatibility problems and offer only a few improved controls. Indeed their questions often
  actually lower the overall security rather than raise. The Windows Firewall has no compatibility
  questions and is extremely secure if you know enough to work around most of the hype. Quality software
  firewalls cost thousands. Most of the hardware firewall routers built in and are considerably
  better additions for your money than any firewall software to low-cost and low-cost.

  If you want to uninstall OR have uninstalled any security antivirus/antispyware/program don't forget
  to go on the manufacturer websites and search for removal tools (these can be performed after uninstalling if
  required) or special instructions to uninstall. Otherwise it will leave causing trouble
  the remains that can be real problems later.

  List of tools to clean/uninstall anti-malware programs.
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  --------------------------------------------------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  ================================================================

  Microsoft - PC Security - how to choose a firewall
  http://www.Microsoft.com/security/PC-security/firewalls-choosing.aspx

  How to turn on the firewall enabled or disabled in Vista Windows
  http://www.Vistax64.com/tutorials/92697-Windows-Firewall-off.html

  How to add or remove an Exception in the Windows Vista firewall
  http://www.Vistax64.com/tutorials/65334-Windows-Firewall.html

  How to use Windows Firewall with security in Vista (this shows how to set up the block
  Traffic NECESSARY outgoing.)
  http://www.Vistax64.com/tutorials/92748-Windows-Firewall-Advanced-Security.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to change the Windows settings to allow for the camera driver must be installed

  My laptop doesn't recognize my digital camera. The correct software is responsible for the camera. An error message indicates that Windows will not allow access to the driver. How can I change the settings in Windows so that the driver for the camera is recognized?

  Help please!

  Hi Brian,.

  1. are you able to install all device drivers?
  2. which antivirus program is installed on your computer?
  3. don't you make changes to the computer before the show?

  The question seems to be as a program is blocked.
  I suggest you perform the clean boot and check if the problem persists. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps.

• Windows 7 firewall will not use recommended settings.

  "My windows firewall does nothing, when I go to stop or start it or anything in this menu, there's something that says:

  ----------------------------------------------------------------------------------------------------

  UPDATE YOUR FIREWALL SETTINGS

  Firewall Windows does not use recommended settings to help protect your computer

  ----------------------------------------------------------------------------------------------------

  Next there is a button with a shield and it says "use recommended settings".

  When I click that button of my mouse is that loading thing where it is just a circle with no cursor, it makes for a while and then nothing happens when its done. the same screen is still there with the same handwriting. It won't let me access anything that either and I can't even turn off and on again to fix it.

  I have Microsoft security essentials. It is a question that has been asked in 2010, but that is the exact problem I have and I can not find an answer.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-firewall-will-not-use-recommended/33aafc1f-8c15-4518-9818-4cfc07b30801

  I tried

  netsh firewall reset - did not "netsh firewall is obsolete.

  netshfirewall reset ADV - has failed to "an error has occurred then that he was trying to contact the windows firewall service"
  netsh int ip reset - worked, but has not fixed the problem

  netsh winsock reset - worked, but has not fixed the problem

  Services

  firewall set to automatic but Windows does not start error message "Windows has no start windows on the local computer firewall."

  Base filtering engine is started and set to automatic

  authorization for the firewall driver Windows not found in services, so I went to the Device Manager/no plug-and-play driver found windows firewall authorization driver, but he says it was launched.

  Unfortunately, the methods you suggested did not work but I found a program called combofix and it solved my problem. But thanks for all the help you gave me.

• The default recommended settings for Windows for Windows 7 firewall is good enough?

  Or do I have to make some adjustments?  I used the Windows Firewall on my laptop Dell 2005 with Windows XP using the default settings.  No problems so far.

  It goes the same for Windows 7 firewall...

• access to the default in IIS6 and IIS7 Web site, how we configure IIS6 on windows 7 to allow access to the default Web site

  How to configure IIS6 on windows 7 to allow access to the default Web site or there at - there someone out there who can put up my computer at a reasonable rate of legend

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads