SRP547 w / fixed IP and username + pw?

Similar Questions

• What is windows error 0 x 80092003 fix it.and how can I get rid of him.

  Impossible to use my windows fix, error ox80092003 memory to come up.a problem is to prevent starting.how thetroubleshooting clean it helps lift.

  Hello

  If please see this thread and follow the instructions on the answer marked as answer.

  I hope this helps. Just reply to the results.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-0x80092003-while-using-fix-it-and-Error-5001/e1b46317-d4c7-402e-b447-6ee2994f52a2

• Windows 7-Vista 32 bit SP2 Build 6002 Windows Updates stopped at update. Usedboth fix - sound and now all the updates are missing.

  Windows Update error 80072EFE when trying to update. Last automatic update was on October 23 or 26. By default it difficult without help. Used aggressive fix - it and all updates disappeared and told Never to recent audits and never for the installed updates.  Proven Octobre23 system restore point. Then I cancelled because I don't think it worked. Is too long (still uncertain - had used before and it took a few minutes) attempted to close from start but just kept hanging and end the session had to be done when I pressed the button on the computer. I tried Windows Error Recovery, but he was able to start. Remove all installed programs of avant-trouble started (3 weeks) may not be updated on your site or start button. Message reads as follows: could not search for new updates. "Tried the safe mode. but do not understand it but computer shut down normally. I hope it's fixable, because I know very little. All above attempts wre taken Microsoft help site. Thank you..

  Betty,

  The utility TDSSKiller.exe supports 64-bit and 32-bit operating systems.

  Following the instructions on this site should help you

  http://www.bleepingcomputer.com/virus-removal/remove-TDSS-tdl3-Alureon-rootkit-using-TDSSKiller>

  A very short sweep but powerful rootkit detector

  Jose Antonio Ponton Posada CEO

• can not connect password and username on.forgot

  can not connect password and username on.forgot

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of any other connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Other than the foregoing, this forum has a policy that prohibits assistance to crack passwords.

  Tricky

• How will I know if my computers security has been breached? __my owner asked me for my email address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  How will I know if my computers security has been breached?
  My landlord asked me my e-mail address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  How will I know if my computers security has been breached?
  My landlord asked me my e-mail address, then my computer stopped working, then offered to fix it and crossed the reg edit.

  Hé oddaz

  If you're really worried that your machine may have been compromised, try to back up your data, and then reinstall windows

  Walter, the time zone traveller

• Can someone tell me how to uninstall ms fix 50202 and 50195

  Can someone tell me how to uninstall ms fix 50202 and 50195

  Hello

  Microsoft Fix it is a troubleshooting utility that will not be installed on the computer. It is used as a diagnostic and troubleshooting tool. It runs once and try to solve the problem and cannot be uninstalled.

• Hibernate button disappeared; Microsoft Fix tool and manual correction do not work either

  Windows Vista Edition Home Premium 64.  Ran disk cleanup and the Hibernate option is now missing.  Microsoft fix tool and the command promt 'powercfg-h' or ' market / hibernate on "does not work either. Is there another way to restore the hibernation in the start menu option or something escapes me?  Thank you.

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• With the help of Excel, the zero in front of the fixed phone and GSM disappears after moving to the next cell

  Make a list of phone numbers in excel. The zero in front of the fixed phone and GSM disappears after moving to the next cell. Any advice? Worked before excel on request, so the knowledge base only. Thank you. L. H.

  In addition to advice of GTS - NJ, who will work, you can put an apostrophe before the zero and it will cause zero to keep.   Instead of enter 0123, enter "0123.

• Table with fixed header and the left column

  I created a table in my application with the fixed left column (left most column is fixed and remaining columns are scrolling from left to right). is it possible to create a table with fixed position and fixed left column?

  Suppose there are 50 rows and 10 columns in my paintings, and only 3 columns and 15 rows are visiable on the screen

  (1) when the user scroll left to right left only most of the columns must be fixed. Remaining cap of the table and column scroll left to right and vice versa. also

  (2) when user scroll high high bottems single topic most must be fixed and remaining all lines (with to the left most column) should be scrollable.

  I am able to put in place a point at the top, but not both. Please suggest

  "If I repopulate the value in the cell when user scrolling, shell, I get scrolling effect correctly as it only shows half cell when the user highlight half of the cell."

  Approach using TablelayoutManager display single cells and scrolling would be cell at a time.  And Yes, you will need to override navigationMovement and n of methods appropriate TouchEvent your TableLayoutManager so that he knows when to fill the cells.

  Another alternative is to have four managers, we don't the the upper left corner (the dead angle), one to make the top row (column headings), one to make the left column (row headings), and the other to do the rest (data).  Place all these in a delicate header and line manager.  Only allow the user to scroll the data part.  Have the difficult Manager to listen the scroll events.  Then have the wily Manager add and remove the dummy column and header line managers as appropriate.  Note that these topic fields would not good passes, they would be either there or they would not be displayed. That would give you your 1/2 a scroll of the cell.  And you wouldn't have to substitute anything to detect movement, you would have left the listener do scrolling for you.

• I dealt with this problem for months. Even hired a comp tech to fix it and still have the same question. There, nobody helping me?

  I dealt with this problem for months.  Even hired a comp tech to fix it and still have the same question.  I had my computer wiped and windows 7 and 8 then reinstalled by a professional.  This all started when I upgraded form 7 to 8.  After 7 to 8 my computer kept getting this error. . kept crashing.  He was supposed to be fixed and it still does the same thing. I was told then move to 8.1.  I have always the same coming error.  I'm not on computer.  IS THERE ANYONE WHO KNOWS HOW TO FIX THIS?  Someone who can explain to me step by step how to fix?  I've tried everything.  Error 0x0000005c [settings 000000000000800 0x000000000000000B x 0 0 x 0000000000000000 0 x 0000000000000000]

  Hello

  The upgrade to 8.1 was perhaps not the best thing to do...

  A lot of people are having problems with it also.

  If it is a desktop computer, have you checked the wall outlet and the plug on the back of the computer?

  Your point about starting the tone certainly as a power or a hard disk problem...

  The problem with you mouse pointer could be related to a feature called quick start...

  Your other problem also, perhaps... Try to turn it off and see if it helps...

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.

• Fixed header and anchor tags

  Warnings: I am new to this forum and use HR 2015 since the end of May. I am somewhere between beginner and intermediate with CSS and HTML, and I don't know anything about javascript or JQuery.

  I tweaked the catalogue office with multi-screen presentation homepage so that it has a fixed header and content scrolls to the top under the header. It works well and looks beautiful up by clicking on a link to an anchor, for example when using the MiniTOC to navigate through a topic. The anchoring of the charges under the heading at the top of the window of the browser instead of under the header at the top of the visible space.

  After studying the problem, I had hoped that I had found a fix to it that hashtag connects this whim is the browser window, but it did not work.

  More research and digging in HR how to configure its bookmark anchors and found out that bookmarks are configured with one

  < a name = "blabla" > < / a >

  tag for anchors instead of one

  < h1 id = "blabla" > blah di blah < / h1 >

  tag.

  According to W3 Schools, "the < a > name attribute not is not supported in HTML5. Use the id attribute instead. "It's disappointing, given that the choice of output is Multiscreen HTML5.

  Can anyone offer a solution that works with apparently outdated HR < a name = "MiniTOCBookMark1 > < /a > format?"

  Thanks in advance!

  P.S. I am posting this at the end of the day and I won't work again until the morning of August 22, 2016, so if I do not answer questions of clarification immediately, please don't think I'm ignoring you.

  I have a header no scroll, and I just added the following to my screen layout stylesheet (targeting IE only):

  a[name]                    {

  padding-top: 130px;

  }

  Adjust the value of the pixel to function.

  I had a play on Chrome, and seems the following to run it:

  {[name]

  padding-top: 130px;

  margin-top:-130px;

  Display: block;

  }

• Password and username XDB

  Hi everyone I have apex 4.2 running on oracle 12 c database.

  I have imported an application and install it in my workspace.

  Whenever I tried to run the application, I get this pop up login password and username XDB.

  I tried all the username admin and the password I can think in my installation of apex. Nothing seems to work.

  I want to disable this authentication so that it does not yet appear.  Please I need help.

  Anyone can be useful. Thank.s

  Hi DBENG.

  DBENG wrote:

  Hi everyone I have apex 4.2 running on oracle 12 c database.

  I have imported an application and install it in my workspace.

  Whenever I tried to run the application, I get this pop up login password and username XDB.

  I tried all the username admin and the password I can think in my installation of apex. Nothing seems to work.

  I want to disable this authentication so that it does not yet appear.  Please I need help.

  Please check the status of the users they are open:

  • Connect to sqlplus with the SYS user and privilege SYSDBA
  • Check the status of the users:

  SELECT USERNAME
       , ACCOUNT_STATUS
    FROM DBA_USERS
  WHERE USERNAME IN ('ANONYMOUS','XDB');
  

  NOTE: If the statement is not OPEN, then follow the next step to unlock accounts.

  • Unlock locked or expired with valid password users:

  ALTER USER anonymous IDENTIFIED BY "password" ACCOUNT UNLOCK;
  ALTER USER xdb IDENTIFIED BY "password" ACCOUNT UNLOCK;  
  

  NOTE: Replace "password" with a valid password.

  Also check if the ANONYMOUS user has CREATE SESSION privilege. If this isn't the case, grant the privilege:

  GRANT CREATE SESSION TO ANONYMOUS;
  

  Reference:

  • Get Windows security pop for the user name and password when you try to access the APEX
  • Re: Apex 4.2.6 Installation Windows security Popup and HTTP 404 not found

  I hope this helps!

  Kind regards

  Kiran

• MISSING LAYOUTS - 2 column fixed, bar right side, header, and footer column 3 fixed, header and footer

  I use Dreamweaver 2013 and when I go to file, new and select new document, model HTML. My two page layouts (2 fixed column, right sidebar, 3 column AND header and footer fixed, header and footer) does not appear, instead it just says: < no >. Why this happens and how to fix this! Please help me!

  As I thought.

  You do not have these models it is because you are using the current version of DW CC 2015.

  These models have been deprecated / replaced by newer models of Bootstrap.

  You can read about the changes of product below.

  New features of CC 2015

  https://helpx.Adobe.com/Dreamweaver/using/whats-new.html

  If you are a Subscriber payment & your computer OS is Win7 or Mac OS x 10.7 (or an earlier version),

  You can fall back to a previous version of DW as most close as possible to your manual.

  Otherwise, you're out of luck.

  Nancy O.

• I would be able to move seamlessly between fix PS and PS mixture?

  I have PS Lightroom, fix PS and PS mix on my iPad iOS 9.0 and I have a record of creative cloud synchronized with my office catalogue Lightroom and wonder if I can change one photo in lightroom iOS and then see these changes infix or mix? I can't know if it is possible to work on a single photo in each application according to what want to do.

  You can move an image around the use of Adobe's "Creative Sync".

  In LR, choose a picture to change, then press the share icon and choose Edit in.

  Mix, open a project, and then select a layer. Press creative cloud icon to display the menu edit.

  Best.

• Created a site in dreamweaver, want to now set up the MySql database and username / password to access

  I created a site in dreamweaver, now you want to set up the MySql database and username / password to access a part of it. Dreamweaver's tools?

  I guess I need to learn PHP?

  Guidance gratefully received!

  Bob

  If you simply need to restrict access to your site, or a part of your site, there is an easier way to do it, using Apache htpasswd, but this solution is very limited and not suitable for use with clients, there is no interesting features people expect, as the ability to reset a lost password.

  Otherwise, Yes, you will need to learn some PHP and SQL.

  You will start by setting up your development computer with an Apache web server, which comes with PHP and possibly also MySQL. There are free versions, such as XAMPP, but I prefer Zend Server, which costs $195.

  Dreamweaver includes data 'tools' to the CS 5.5 version and there are third-party plugins available that will handle the data functions, but to really make things right you need to learn how to write your own code and don't mess with the tools who write code for you that you can not understand and are difficult to change.

  I think that David Powers PHP Solutions book is a good introduction and also includes a tutorial on building a password access system that is fine.