SSD hard drive for a 2011 mac book pro

Similar Questions

• Who is the best SSD 500GBs in an early 2011 Mac Book Pro?

  I just updated my RAM to 4GBs to 16GBs in May 2011 beginning 15 "MacBook Pro, now I'm looking to upgrade my computer with an SSD. I'm looking for some 500GBs because 1 TB is too expensive for me right now. Any suggestions?

  Thank you very much!

  The only thing I can say, is that the only true upgrade in today's world is a Solid State Drive. Now you can go to Crucial.com and get a 480 GB ssd for 139.99 or a 500 GB for about 159.99 about. A regular HARD drive could cost you half, but it's so worth the extra mulah.

• If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?

  If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?

  Chaka - welcome!

  What you want to do on your "new" MBP?

• By the end of 2011 Mac Book pro 15 inch battery indicating zero

  I have a 2011 Mac Book Pro (end) retina which really is not used as a laptop display. (always connected)

  Just today, he showed zero percentage battery icon.

  I have reset the SMC and that did not help

  Should I try to disconnect the battery to see if it would help

  Is the battery shot just like that?

  Thanks for the help

  In addition, if the battery needs to be replaced can I do it myself?

  Hello

  The battery may be necessary replacement.

  Check the number of maximum cycle. Instructions here > Determining battery cycle count for Mac notebooks

  http://www.Apple.com/batteries/service-and-recycling/

  You can replace the battery yourself > https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+Battery+Repla cement/7511

  But if you have never done this before, I recommend you take your Mac to an Apple Store. You can make a reservation in advance at a Genius Bar.

• ENVY 17-j067ez: SSD hard drive for hp envy 17-j067ez

  Can I put disc hard patriot ssd in hp envy 17-j067ez as well as my hard drive of 1 TB? And if I can put this ssd what is the top speed of this drive in my laptop? SRY for bad English and tnx a lot.

  Link to SSD drive hard description https://patriotmemory.com/product/blast-solid-state-drives/
  Link to my computer laptop secification http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03833861

  Yes you can. The SSD will operate at full speed SATA-III. It is a major, major upgrade. It takes a (caddy and adapter cable) to install the hard drive in the Bay secondary.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  It comes from an American vendor but they ship to other locations and their products are sold in other countries as well.

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  Put the SSD in the 'main' location and the hard disk in the second slot. If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Version CS4 for my new Mac Book Pro

  My lap top is dead so I bought a Mac Book knowing CS$ would run on the Apple.  I paid for the license Botr have only the version of Windows. Help?

  Unfortunately, you may need to buy a newer version.  in the past, you could only trade platforms for new versions of packages such as the Creative Suites.  I don't know how it works now the creative cloud is the new kid on the block.  They still sell CS6 versions but it is perhaps the last CS, and more bad news is that CS4 is no longer eligible for the CS6 upgrade since last January.

• What is the PNY CS 1311 SSD is compatible with Mid 2010 Mac Book Pro?

  I would like to install this SSD on my Mac, is an SSD cheap I want to use until I finally upgrade my gear. . My laptop is mid-2010 MacBook Pro 13 inches.

  Is it compatible?

  For budget SSD

  I had success with scores of good benchmark using these SSD on a MacBook Pro.

  Trion 150 OCZ series

  Samsung Evo 850 series.

  on the 500 MB/sec in reading or writing.

  

• I can't install CC for desktop on Mac book pro.

  Hello

  Year last IV ' e purchased CC for teachers and today I bought a new one. By chance, I have removed CC for the office and I can't install the new download. It stops when it reaches 50%. Also, I can't install the new application manager.

  Must I remove all CC programs and start all over again?

  Paulv98862896 please use the steps listed in the "failed to install" error Creative Cloud Desktop application to reinstall the creative Cloud Desktop application.  If you have any questions about the steps listed in the document, we invite you to update this discussion.

• Can I run After Effects with 2.4 GHZ Quad Core i7 Processor, 16 GB of RAM and a new SSD hard drive?

  I have a 2011 Mac Book Pro with 8 GB of RAM and The RAM Preview plays in 10 second Incraments. I want to pull out my hair! I don't have the sum of $ to buy a new computer. If I switch to 16 GB of RAM and get a new drive SSD will work After Effects, or I lose my $$. Please help, I have a very important project. It is about 12 minutes long and I need to add a lot of sequelae to complete my project

  First of all, you have optimized your system: Optimizing after effects of performance - Support Adobe

  Second, it looks like you are fairly new to AE and that your workflow is not very effective. Here's the deal. After effects is not an editing application, it is a graphics and compositing designed app to create shots or short sequences. In addition, I would say that more than 90% of my AE projects are less than 10 seconds, because I created shots (with handles - extra images) I'll change in the body or some other NLE. Some of these comps second 10 have a hundred layers or more. If I had to do 12 minutes into a movie I would fuck the cut first in Premiere Pro to understand what was the best way to tell the story, then each shot than necessary effects would become a separate AE comp. At the very least each scene must be a model. In most of the stories that are told, as a film, a scene are only a minute or two. The average is probably less than 6 seconds. I can't imagine putting together 12 minutes in a single model AE, not because I couldn't, but because I would probably change the "timing" of some of the cuts, edit audio or make some other change before I made and changes in the middle of a project of 12 minutes would be a nightmare.

  Here's how a work on almost all editing projects.

  • First installation in a NLE such as Premiere Pro until the story is logical
  • Put the shots in AE requiring animation or effects
  • Inside AE, I first make a test pencil to check the overview and animation timings with the Panel of the model to 50% or even 25%, and automatic resolution scheduled to ensure that the timing is ok
  • Effects are added and critical frames are checked 100% for color and everything else but I rarely to ram preview several frames because I'm already happy with the calendar
  • The model is sent to the SOUL (Media Encoder) or sometimes the cue to render to render in a production format appropriate (usually 10-bit or better, often a sequence of images)
  • If the model is sent to the SOUL I continue to work on the next shot until I finished all the effects work
  • The effects of rendering images are reduced in the NLE to replace shots in the rough cut and editing is polite
  • The project is then added to the hearing for the final mix
  • The final color ranking is made - usually in the category of speed or resolution
  • The final product is made to a production for archiving format and a format of distribution (usually h.264 mp4)

  There are a lot of bounce back, but it's the most effective way to work on any project. Have you noticed that an overview of full resolution RAM full length does not at any time?

  If installation requires only a few short shots or sequences to AE, I will occasionally use Dynamic Link, but most of the time all the effects work is made. It just makes it much more efficient.

  I hope this helps.

• I bought the Creative Suite 5 cloud in June 2010 (Ser # DELETED) if I recall with two licenses, one for my laptop iMac book Prod and one for my iMac 27 "flat screen.  My Mac Book Pro needs to be replaced by a newer Mac Book Pro wi

  I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen.  My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS.  What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Mac Book Pro El Capitan won't start

  End of 2011 Mac Book Pro with OS X 10.11.2 and 500 GB SSD locked when you change an image in Lightroom 6.  Display got lines in there, then moved to the right until all the images in all programs were packaging off the screen on the left and ending on the right.  I decided to quit Lightroom and it went in her check and the safeguard of this app.  At this point the computer locked up completely with the beachball forever.  I stopped with the start key and restarted.  Desktop came, but then locked up again.  No restart in any mode after that.  Computer goes the logo Apple on a white screen with the high CPU activity as evidenced by a cooling fan screaming.

  I have a backup recovery app on a USB key, but does not know how to use it. I also still have the original hard drive that could possibly be re-installed, but he showed signs of early failure.

  Can anyone help?

  Thank you very much

  Tom

  MacBook Pro repair for graphics issues outreach program

• U2414H, Mac Book Pro, DisplayPort 1.2 empty, solved

  I'm posting here in the hope that it gets indexed by search engines and other people can find the answer that I spent a few hours searching without luck.  At first, I must say that I am generally very pleased with this monitor - like bezel-thin, very good quality picture, easy to set up and a great price. However, most of this post is going to be a complaint and attention to others. told me, incorrectly, that my early 2011 Mac Book Pro 15 "mini-DisplayPort taken in charge the DisplayPort 1.2 Protocol. It turns out only. Then when I activated the DisplayPort 1.2 screen turned white, as the instructions said he could. No biggie, you would think - just get on-screen display (OSD) to the top again and disable DisplayPort 1.2 or do a factory reset. Here, you can't get the OSD until a source is connected correctly to the screen. Which means that you can not disable DisplayPort 1.2 or do a factory reset, you want to do because you cannot successfully connect to the screen, until properly connect a device to the screen. And so on and so forth.

  There is no other way to do a factory reset, so the only way for me to reset the monitor that is to go buy a mini-DisplayPort-HDMI cable in order to connect to the monitor in this way and do a factory reset. I confirmed this with a call to Dell technical support, too. I don't quite see how thought happened during the design of the firmware. How do you design a monitor where the only way to do a factory reset is when a device is connected correctly? A major flaw, but it will apply only if you don't know this in advance, where this post.

  It also would have been clearer if the warning had said "this can make your blank screen which, until you have another cable to connect via HDMI, means that you have essentially an expensive piece of plastic."

  Follow these steps to disable the DP1.2 on the U2414H WITHOUT signal input

  Buttons =.
  Preset, brightness, Menu, power supply, output

  When you press the Menu button, the buttons are then =
  Up arrow key or down arrow control OK, return, power

  * Turn off the monitor
  Unplug all the video inputs of the U2414H wiring
  * Turn on the monitor
  * Press the Menu key
  * Press the button OK check (3rd left) and hold FOR 15 seconds
  * Disable DP 1.2

• Why if Dreamweaver is ready pour open a 50 KB file and code to navigate in, on a mac book pro 2014 i7?

  In addition to being ready, the WYSIWIG part in all the senses especially as soon as there are some sensitive css.

  I have to go through coda to work faster in the code

  The same pour Acrobat, pdf navigation is jerky, the plug-in one coup another PDF reader.

  Have I forgotten something during the installation of adobe applications or is what Adobe does not optimize its soft for the latest mac book pro 2014?

  Hi Nico,

  Thank you! If you have a version purchased Dreamweaver CC, please send me your Adobe ID, location and contact details on a private message.

  In the meantime, try the solutions in these documents as well

  Fails on Mac OS 10.9

  You are prompted to install Java SE 6 Runtime | Mac OS 10.9

  Thank you

  Preran

• SSD for Mac Book Pro

  I have a Mac Book Pro mid 2012 my hard drive died and I want to replace it with an SSD.  I read on the 850 EVO 500 GB Samsung are good but other messages say there are problems with these and Apple Mac.   I only want to spend around $250 for a 500 GB SSD.  What should I expect?

  Other World Computing (OWC) and Crucial are mentioned as sources to get the SSD looking

• Sync with Mac Book Pro external hard drive

  No recommendation for the software synchronize files between the Mac Book Pro Retina and the external hard drive / distance NAS?

  Time Machine

  CarbonCopyCloner

  rsync