SSD in a HP ENVY DV7 7332ea and DIANE setting in the Bios?

Similar Questions

• L450 blocked to 0.77 GHz processor when it is on battery and can not downgrade the BIOS

  Hello

  It seems that the CPU of my L450 is blocked to 0.77 GHz speed when it is running on battery power and no matter how heavy the load, the CPU speed does not fit on the rise, unless I plug in the AC power cord.

  This makes the laptop a bit useless on the battery when you do something time CPU.

  This seems to be the unusual question, based on the quick searchand possibly related to the BIOS. I would try to downgrade from 1.16-> 1.15 or 1.12, but I always get the error "Failed to secure authentication of Flash", after you run the flash program and rebooted (when flashing the BIOS should start).

  I turned off in the BIOS the option 'Prevention of RollBack Secure' settings, so I guess that's not the question for not having to downshift.

  Does anyone else have this problem (with the speed of the CPU limitation or decommissioning of the BIOS)?

  I tried to change options in plan powers the window, like 'The Maximum processor state', 'Intel CCMP energy efficiency Settings. "

  I am running Windows 10, if any relevant information.

  OK, think about it.

  The fix was to disconnect the battery and the power cord for one minute. After that, the CPU is scaling its speed again normally.

  Good thing that this laptop model has a removable battery, I guess...

  I'd like to, I would have thought this before going through the demotion to 8.1 Windows, since the I suspected it could be a bug with Windows 10 or some of its pilots.

  I think that this problem was caused by my recent update BIOS of 1.12 to 1.16, but it's really just a guess.

• Envy of HP dv7 7332ea: How can I reinstall the sensor HP SImplepas and Paleoclimatology on Win 8.1

  Hello

  I reinstalled once validity sensor driver and HP SImplepass before doing so in a particular order, that I don't remember and it works under the compatibility settings. I had to update my machine and I can't get the snesor to work

  Can someone advise on the correct order of installation driver and pass simple and give advice on file names correct HP SP for both for a dv7 7332earunning win 8.1 64 bit.

  Thank you

  Foxes_17

  Bacl welcome to the Community Forum of HP.

  See the following topics:

  HP SimplePass upgrade instructions

  Follow the procedure (Page 2 in writing):

  Procedure - updated / (install HP SimplePass Re)

  1. first driver

  2 reset

  3. the following software

  4 reboot

  NOTE:

  • You probably want to use / stay with the 6 series / version 6.x HP SimplePass.
  • Ignore references to series 8 HP SimplePass.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP ENVY 23 23 - d160qd: how to enter the bios on a touch screen and wireless keyboard

  I had a HARD drive crash and cannot enter the bios as the machine has wireless keyboard and touch screen. The power led lights up red on Board of the touchscreen lights on / off power, hard drive works, reader lights turned on and off. The USB ports seem to work and I have a light on my USB to RS232 device.  I did pulg a USB keyboard and hit the F10 key at startup and still no change. Make a bootable disc after Microsofts statement and it seems wook, but with a screen can't confirm that.

  I need to enter the bios to set up to boot from the usb port and I need to deal with this rear screen too. all cables, I can see are connected and a new hard drive and the hard drive are not load anything down that I can see.

  @Dan45L

  I'm glad to hear that it is resolved. I was checking regularly after your last post to see if there was an update. I got the impression you were in your previous messages set motherboard.

  Of course, I know what you mean about how things are. Many things change in one form or another, but the basics of troubleshooting are fairly constant. Eliminate the possibilities and drill down to the cause.

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• HP Envy 15 Touchsmart does not start after the bios update

  I had one laptop touchsmart from HP Envy 15 (initially Windows 8, windows 8.1 now) for about 2 months now and have not had any problems, until a few hours ago I tried to update the bios of my laptop with the hp support assistant. After the reboot, the pc is more would start up and took me to a blue screen with the error SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Everything that I've done short far from a refreshment or a reset has not worked and if I could I would avoid both that I don't have the bandwidth to download windows 8.1 again.

  HI Calsius:

  Thank you for your query.  I will be happy to help in any way I can!

  After the Windows 8.1 update, did you create a restore point?  If so, you can use to restore from that date and not lose your 8.1 updated.  Some BIOS have an option for a restoration which should not affect your operating system.  I did a search of Microsoft and found this answer click here.   Here is a document on the ' update the BIOS'   click here.»  You did not provide your model number and the HP Envy 15, is a series, so I couldn't get a specific documentation for your computer.  Here is a document on ' computer will start (Windows 8) " click here. If you are able to get your computer running and upward I update all the driversand then create a restore point to return if necessary.  If the Bios update should fail a 2nd time, your restore point will take back you to just before you retried the update. If you were to use the recovery option you need go back to Windows 8, or back to the factory.

  Please let me know if this helped.

• Re: NB100-12N - what I need to activate sleep and Charge USB in the BIOS

  Hello

  What I have to go into the BIOS in order to activate this function or it is activated automatically?

  In the case where to enter BIOS why this was resolved in this way?

  Could not simply be available other hassle?

  I really put t know what problems you have with the NB100 and why it of so difficult for you to check if the BIOS contains the USB load option and sleep.

  To my knowledge, the NB100 supports 3 USB ports with Sleep and Charge function.
  But if you want to know if it s on or off then press F2 immediately after that the laptop was turned on to get access to the BIOS Setup.

  Enjoy your little NB100

• Satellite L - system of start-up failure and no DRIVE in the BIOS

  HI all, my laptop for some reason any does not seem to think he has a hard drive installed, he said nothing in the BIOS for hard drive.

  I made the mistake of not to make recovery disks.

  Someone has an idea of what I can do to get this working again?

  Thank you

  Hello

  Looks like your HARD drive is defective because the BIOS doesn't recognize.

  I think you need to replace the HARD drive and reinstall Windows using the Microsoft installation disc. All the drivers and tools that you can download on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Welcome them

• Satellite P300-h-13: stops, restarts itself and then freezes in the BIOS

  Hello

  I have a laptop TOSHIBA SATELITE P300-h-13.
  When I turn it on, it starts before blocking immediately down and then it restarts itself (twice).

  Then it freezes in THOSHIBA default start screen.
  I can't access BIOS (says it charges but nothing happens).

  If I press the ESC key, I got a screen saying that the processor is detected and it gives me the ability to L2 cache, it says the RAM passed and then it indicates that the Bios system & video are overshadowed.

  I tried without the battery, but it doesn't change anything.

  Please help me solve this problem on.
  Thank you!

  Hello

  I don't know why this is happening and it's really strange question that should not happen on the new laptop.
  In such situations, you can simply try standard measures and see if it will work properly again.

  By the way: how old is your laptop? Have you noticed this behavior from the first day?

  In any case, try to enter in the BIOS somehow and set it to default settings. try to enter Advanced boot options using F8 at the start and check if the installation of operating system work (during the first backup of data, if possible).

  If nothing helps I would recommend not to do anything, but contact the nearest authorized service provider. Let them check your laptop computer and, if necessary, repair. Warranty will cover all costs.

• HP Pavilion DM4-3105tx: HP Pavilion DM4-3105tx after the upgrade to 1 TB HARD drive won't start not and cannot get into the bios

  Hi all, just need help on my portable DM4 after replace 1TBHDD and unable to start and enter the bios.

  Help, please.

  Thank you & appreciated

  

• Laptop does not charger and cannot get into the Bios, help!

  Hi, I own an Acer Aspire 6935 G, so far he treated me so. Recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but on my charger fuse blew!

  Then I took another replacement just to the case where there has been previous replacement I bought and nothing major, new replacement seems to work well (lighs load lights up) but it does not all power in the laptop. Witnesses of load lights as indicated, but the laptop won't before the Acer splash screen. Due to the battery being dead, I can't access bios set up so I can check the status of my laptop not enter recovery. I was wondering if it could be something other than a hardware problem, and if this is the case; It is expensive to do is fixed or am I better off buying a new laptop?

  Thanks in advance!

  This is a:

  Acer Aspire

  6935G

  Intel Core DuoT6400

  4 GB OF RAM

  Windows 7 Ultimate

  Edit: There is think beep when the chargers plugged into the lapto, if that makes a difference?

  Lugman > recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but blew the fuse on my charger! >>>

  Sorry, but it does look like a hardware problem. Sounds like the power supply may be about to blow another fuse. I think you have a short or large scale electric leakage somewhere that prevents charging of the battery and power - it but maybe not enough (yet) to blow another fuse or switch off the LEDs.

  First remove the battery and power connections before you tear things. The first place I would look is around the port of loading where your problems started and hope that it's not deeper in the system where it can cause some MB or more serious damage. Look for the places where the lines of welding on the System Board may be in contact with a screw or a metal on the ground. While you're there, reconnect both ends of all accessible Ribbon (like the video and keyboard) connectors. Also to the HARD drive, modules of memory vivid and all the other connectors for component for good measure.

  Once you have checked everything, and before you have wound all caches and screws, see if you can carefully insert the battery into the receptacle and plug the charger. Don't try to power. You can do this on an insulating surface to avoid the land of naked drivers. The LED light looks like he is in charge? If so, let it continue to charge without trying to power on. I think after 4-5 hours, the led that would indicate a fully charged battery. If so, I would try and then power on. If not, and it's still seems to be in charge, stop, do not try to and we will draw the next steps.

  Jack E/NJ

• Need to do a system restore. When the computer starts and I cannot access the BIOS menu - help please... (WinXPSP3)

  I need to change the boot order, so the installation CD starts first-I can't enter the Bios at Startup Menu.

  It's a HP Pavilion that says F1 is supposed to allow me to access the menu of the BIOS at startup.  I also tried:

  Tip There are other keys that provide access to the BIOS. They include the following:

  o F1

  o F2

  o F10

  o, CTRL + ENTER

  o ALT + ENTER

  o, CTRL + ALT + ESC

  o, CTRL + ALT + INSERT

  And kay LED does not work either.  It's Windows XP - 32 bit home.

  Service Pack 3 is installed - SpySweeper is anti-virus and using the Windows Firewall.  This computer were of Trojan horses (40) and finally the browser was re-directed.

  Thanks for any help.

  It shud be a Hp tool installedon your system with which you can edit boot options even after logging on to XP.

  Its something like HP or Credential Manager protection tools.

  Maryse Agarwal

• Update system-model and serial number in the BIOS on T61

  Hello

  We just changed the motherboard on a T61. After Windows XP starts, we would like to launch ThinkVantage SystemUpdate

  little, it cannot identify the T61 properly because the system Type is not correct in the BIOS.

  In the past, we were able to update it for example on the server X-Series starting with a BIOS update diskette

  and typing the correct values.

  How do I change them on a T61?

  Thanks in advance

  Welcome them

  Chakoe

  You will need the maintenance disk. It is only available to our technicians on the ground, technicians deposit and trading partners IBM/Lenvo. We are NOT allowed to discuss this for security reasons. Hope you understand.

  If you are a business partner, you are more than welcome to go to the website of Lenovo business partners or contact them by phone for help with this question.

  Kind regards

  Mark

• WIN VISTA: After installing new drivers through the utility Dell to keep the PC to date, DVD not working anymore (and not located in the bios Setup)

  When starting, it not recognizing my DVD drive more.  I went into the bios setup and it does not appear in there.   I have to re - install the bios?  or ....???

  Hello

  If the drive does not appear in the BIOS, there is a hardware problem - either with the player, wiring,
  or the motherboard interface circuits.

  Check with a real computer store (the one that makes its own internal circuits and not of leeks and poster
  a Best Buy or other stores) or Support of Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

• Envy of HP dv7-7332ea: having problems to install the driver of HP wireless button

  Hi all

  I would really appreciate some help here. Recently, I did a factory rest on my laptop dv7 HP Envy but can't reinstall Windows 10.

  Before doing this, I was told that I need updates of Windows 8 to 8.1, and then to Windows 10.

  However, I am unable to Al of Windows 8 to 8.1 Windows I'm not all the drivers installed.

  For some reason, I am unable to install the driver of HP wireless button. Whenever I try to download through Windows Update in Control Panel, it downloads and after installation displays an error code 80070436.

  I am unable to get this driver installed and therefore cannot be updated to Windows 8.1. I tried to update to 8.1 without the driver, but my laptop is restarted it got stuck at 82%.

  I would be grateful if someone could give me some advice or help get this sort I seem to keep hitting a brick wall.

  Thank you very much

  Ian :-)

  You are the very welcome.

  You will be able to install W10 directly without the need to spend any other OS.

  I did it several times already, so I know it works.

  Twice on nine discs in a solid state on laptops that had previously been W10 on the old mechanical hard disks.