SSD keeps using all available space

Similar Questions

• Why my iPhone 6 uses all my space when I'm not using it?

  I used my iPhone 6 16 GB since November 2015 and from the beginning I place no problem, now it says I used all of the memory on my phone when I never even did use! Help, please!

  Using features like photo stream? If so, try disabling the photo stream on iCloud and recheck your free space.

  You connect your phone to iTunes and take a look at the bar of storage at the bottom? The section 'Other' is larger than 2 GB? In this case, restoration could take back wasted space.

  What is 'Other' and what I can do Abo...

• Using all the space on a MP3 player

  I have a MP3 player with a 7.4 GB capacity. When I synchronize automatically results using Windows Media Player 11 it leaves always 1,4 GB "remaining", even if there are tracks of the snych say he didn't have space for. How to use the additional space? (I already did so that space reserve other programs is at 0%).

  See you soon!

  Hello

  Check with the manufacturer of the MP3 device that they can have a placeholder for the firmware
  updates and other features.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Duplicate photos in "My pictures" automatically. What can I do to stop that he uses all the space

  I LOOKED AT ALL THE GUESTS AND DOES CHANGE, BUT SOMEHOW 'MY IMAGES' CONSTANTLY DUPLICATES ALL COPIES OF IMAGES IN THESE FILES.  UP TO NOW NUMBER 11 AND RUNNING OUT OF SPACE.  HOW CAN I RESET "MY PICTURES" TO NOT DUPLICATE COPY AND IS THERE A FAST WAY TO REMOVE EXCESS COPIES NOW IN THE RECORD. Thank you.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. This only happens with the pictures in the folder?

  I suggest you to see link below and check if it helps.

  Method 1: Eliminate duplicate files: http://windows.microsoft.com/en-US/windows-vista/Eliminate-duplicate-files

  (For Windows XP)

  Method 2: Try to run fix it from the link below:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 3:

  Also try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• Thin provisioned VMDK consume all available space

  Hello

  • Server: Win 2008 R2 with SP1 (file server)
  • Storage: VMDK on VMFS5 datastore (thin provisioned), which underlies the SAN fiber storage
  • vSphere: vCenter Server Standard 5, ESXi 5.0 Patch 2 (build 515841)

  ... So, I have a VM file server running Windows 2008 R2 with SP1.  The system (c) partition has been successfully thin (VMDK using 13 GB to 40 GB).

  However, for all subsequent hard disks virtual created on the server, the NTFS partition is very slow to get into shape - and the actual size of the VMDK creeps slowly up to the size of the VHD (you can see the gradual rise of the VMDK size in the browser to store data during the formatting process).

  The VMFS data store that we create new virtual hard disks is version 5.  All virtual machines with virtual hard disks on VMFS version 3 seem to be supplied thin OK.

  Nobody knows what could happen here?

  Hello

  Do you use quick format?

  Otherwise, your score will take up any space. Check here:VMware KB: using thin provisioned disks with virtual machines

  "If a guest operating system needs to use a virtual disk, the must invited first operating system partition and format the drive in a file system it can recognize." Depending on the format selected in the guest operating system, the format can cause the disc thin provisioned in full size.

  For example, if you have a drive end with a Microsoft Windows operating system implemented and format the drive, unless you explicitly choose to fast formatting, Microsoft Windows format tool written information to all sectors on the disk, which in turn inflates the disc thin provisioned in full size. "

  Kind regards

  Julien.

• Use of root for the system volume is 95%, var/ftp uses all

  Hello

  I have a ReadNas 102 and lately I have these error messages using the root of the system volume is 95%. After checking the files/var, I noticed that desired used all available space. I had FTP enabled for some files and it seems that the content of these files is copied to the folder var/ftp.

  Perhaps a matter of newbe 'stupid', but is - it normal that this folder/var/ftp is totally used.

  Second question: How can I safely remove the content of this file/var/ftp?

  Thanks in advance,

  Jan

  Hello.
  The ibdata1 still growing is not a ReadyNAS problem, but a problem of MySQL, may be triggered or worsened by track LogAnalyzer to commit requests.
  There is a lot of discussion online about this. But it seems that there is no easy solution to reduce its size.
  An example of thread: http://stackoverflow.com/questions/3456159/how-to-shrink-purge-ibdata1-file-in-mysql
  If you don't use it, I suggest delete LogAnalyzer and mysql-server.

• May not use all the available space in the data store

  Hello

  We have a HP DL580 G7 Server P410i raid controller with 8 x 1 TB HDD.

  I create a raid 1 with 2 hard drives (1 TB) and raid 5 with 6 hard drives (5 TB) and install ESXi 5.1 in the first data store (1 to).

  After installation when I tried to create the 5 TB data store, (ESXi detects and displays the space available 5 TB) it does use that almost 2.5 TB! and may not use all the space

  I also installed the ESXi 5.5 but still no luck.

  This Ko seems to apply to you: http://kb.vmware.com/kb/2006942

• mailbox use my iCloud space?

  as mentioned in the title should use the available space in my iCloud or the files elsewhere?

  No, it doesn't count against your iCloud-storage space.  See here- limits of mailbox - Apple Support

• Files SER by using too much space

  Our production server had used almost 90 GB in the past year. After digging further, I realized that the audit in the storage of document file uses all the space.

  Is there a way to purge files and not lose any data? Where are used in the workflow as an attachment, PDF files etc. stored in the file system or the Adobe database?

  Aditya

  Workbench.

  You don't want as you could disable the process to follow.

  Jasmine

• Why windows doesn't use all the ram I have available to her?

  new installation of windows 7. card mother support 16 GB of ram, 8 GB installed, windows will only recognize 3 GB, what's up?

  Friday, May 14, 2010 21:12:42 + 0000, bigterry wrote:
   
  > new windows 7 install. card mother support 16 GB of ram, 8 GB installed, windows will only recognize 3 GB, what's up?
   
   
  You are using Windows 7 32 bit?
   
  All versions of Windows 32-bit client (not just Vista/XP/7) have a 4GB
  address space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.
   
  But you can not use all of the 4 GB of address space. Even if you
  have a 4 GB address space, you can use * autour * 3. 1 GB of RAM.
  This is because some of the space is used by the hardware and is not
  available for the operating system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.
   
  Note that the hardware is using the address * space *, not the real
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Why my PC cannot use all of the available memory?

  Hello

  I have windows ultimate 64 bit and the 6 GB of ram (laptop)

  http://img03.arabsh.com/uploads/image/2012/09/19/0d36454a60fa0d.PNG

  As shown in the photo, there is a free memory and available memory

  Total: 6058
  caching: 2713
  available: 2552
  free: 1

  Why windows cannot use the available memory, although there is no such thing as free storage space!

  What you see is normal.

  Windows 7 do not free memory. He's trying to preload it with applications that she believes, based on experience, that you may need.

  If you have plenty of RAM, you can see more free memory if Windows doesn't find anything to him with preload.

  Available memory is not actively used by all processes memory but it is preloaded with applications, is of the opinion, based on experience, that you might need as I said above. If it is required by another process, it is available to be used and the preloaded data are deleted.

  I hope this helps you.

• How to make a panelTabbed to occupy all the available space?

  Hello
  
  I have this simple structure in my page, but I can't do the panelTabbed occupy all the available space in the page:
  
  Page:
  

  panelStretchLayout
     Facet Center:
       PanelGroupLayout - Scroll
          PanelBox
          PanelTabbed
              ShowDetail1 (anything inside, tables, etc..)

  Now, the panelBox and and panelTabbed are at the same level. But I can't get the tabs expanded according to the space available under the panelBox max.
  You have an idea, the special properties to set are there?

  If you want the component panelTabbed to stretch all the senses, you must use a different panelStretchLayout like this:

  Edit: no need "AFStretchWidth" style for panelTabbed component, in that provision.

  Published by: Ayhan Gungor on March 23, 2012 14:32

• The use of RASENTRY for checkmark all available devices

  Hello

  I am trying to install a new entry of Ras via RasSetEntryProperties, which works fine, but I can't find a way to ensure that all available modems are disabled in the DUN Properties dialog box.

  The RASENTRY struct has a member named szDeviceName and this will check the modem, whose name has been provided, but I do not know how to approach more than one modem with this.

  I tested check all other modems in the dialog connection properties and then ran RasGetEntryProperties to see if something has changed in the RASENTRY struct but there is no difference.

  I looked also RASDIALPARAMS and RASSUBENTRY, but I don't think they apply in this case.

  Any suggestions on how to achieve this are appreciated.

  Thank you

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information is useful.

• My hard drive is filling up all the available space on my hard drive

  Original title: my drive is 'eat' himself!

  Something happens in my system which occupies all the available space on my hard drive.

  I deleted everything that I possible can, but as soon as I create a space that it disappears.

  There is apparently a function involving my e-mail archives or my installation "restore."

  Recreate the data but do not delete the file/data who is who replaces it.  What has

  happened in the past, but at that time, it was the result of my control one inadvertently

  email replication function... this time I got nothing done to cause this duplication of work.

  When it started to affect my system this time I looked for things to remove and found

  many of my emails in the "sent" folder had been duplicated.  I immediately removed all

  These duplicates and has acquired an important place but in a short period of time the

  disc had been filled again.

  I ran anti-virus (McAfee) and combating malicious programs (Malwarebytes) without finding

  anything that can be causing my problem.

  Thanks in advance for any help.

  Hello

  Try the methods provided following and check if that helps:

  Method 1:

  Try to run the disk cleanup tool and check if it helps:

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  Read the following article and see if it helps

  Computer viruses: description, prevention, and recovery

  http://support.Microsoft.com/kb/129972

  Also check out the link and check if it helps:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.

  A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit).  The workstation hangs under stress, apparently because not enough RAM is available.  ("Stress" is "Turning entirely made of a certain complexity 3D drawings")

  The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.

  There are two issues, I think:
  1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
  2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?

  Thanks in advance.

  Thanks for the reply.

  I studied the installation of AutoCAD 2009.  It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs.  (In other words, it is not marked as a 32 bit application.)

  I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it.  We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail.  Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded.  It seems that just drawings don't take up that much RAM.  BTW, there was no increase in the paging activity that I could see.

  However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings.  The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.

  So: It now seems that there is a problem with AutoCAD, not a Vista problem.  I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.

  Thanks for your help.