SSD not work / be detected - error Windows installation on laptop HP Dv6-1149wm

Well, well, I tried three different nine ssd: 1 kingston v300 120 GB SSD, 2 840 120 GB ssd samsung, and 3 an another kingston v300 120 GB SSD. Tried in this order.

The Kingston-discs Are not detected by the bios no error or nothing, nada. When it is attached to another computer running windows drives are detected properly. nothing wrong with that.

The Samsung player- It was the second drive I tried. It has been detected by the bios but diagnosis gave me the '303' fast error. When you install windows via USB, it asked me to drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition or format. Not even partition the drive via the command prompt by using diskpart worked. It returns an error indicating an incorrect setting or something like that (Note I could partition the drive here but not format NTFS).  I could manually partition on another system completely. Formatting/partitioning via another system has allowed me to completely enter the installation up to the point where it says "installation of features" then it gives me an error saying that it was impossible to define the local system - or something like that. In addition to that I also tried to install windows on the other system that was working fine but would not transfer to the laptop. I also tried the previos on the ssd drive cloning, but when booting the computer gave me a disc read error.

My personal desktop (OCZ Vertex 4 128 GB) drive- it has worked. Diagnosis of computer picked up fine and did not point out the mistakes. The only thing is that I tried to install windows on it because I already had a facility there.

My thoughts– my best guess is that there is a kind of incompatibility with the drives firmware and the BIOS of the computer. The Bios (Insyde h20 F.21) is very limiting in a first time, too easy to use, and not much to do here, second he has not seen an update since 2011. Seems to me that the SSD technology may be advancing faster that HP can follow their updates (this of course assuming it's the BIOS that is at fault)

I am open to suggestions for ideas, basically anything that can help me at this point. I spent many hours on it and I turned empty.

In the end, I ended up putting 4 vertex in there. For some reason, the mobo refuses to recognize the kingston ssd. The samsung, I can't say with certainty because it detected well, but wrong on everything. Must have been a bad disc. It's weird that the manual says it does not accept the ssd because many old machines still accept DSS. Any ways long story short the the kingstons were not compatible, probably faulty samsung, the ozc was the only one that worked perfectly.

Tags: Notebooks

Similar Questions

  • Outlook and printers do not work and SFC error Windows Resource Protection found corrupt files but was unable to solve some of them.

    Separated from this thread.

    SFC all said above.

    Windows resource protection found corrupt files but was unable to solve some
    of them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.

    I was hoping that fixing the above might fix below.

    I had 2 problems.

    In outlook I have about 300 deleted messages from the deleted folder and when I entered the box and they were all there. I did it again and it happened again. Finally I did drag the files to the junk e-mail folder and not empty and they were gone and he seems to have stopped.

    The other problem is with the printer profiles. I changed routers and had to reinstall the printers.

    They appear ok in devices and printers, but when I go to print all old printers appear. They are not in the Control Panel, just new, but the drop down menu select printer boxes have many printers that are not active or working more. I would like to get rid of them.

    Thank you

    Harv

    SFC checks really just a list of some of the most important files (such as those required in order to activate the system at a very basic level), and generally what he is going to fix all that is at a "higher level." And Yes, it will almost always find one or two tiny little things but they are not significant failures, just a file with a version number of new or more than what's in the list.  Unless there is a symptom of a problem, probably best simply to ignore it.

    Just follow best practices: do not run as administrator for daily use, maintain and keep a backup (use a simple as automatic backup, Carbonite or store your files in OneDrive).

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

    The Windows Installer

    I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

    Hello

    -What you have done to try to solve the problem?
    -Did you change on your computer due to which the question has begun?

    I recommend you follow the steps in this article and see if the problem still occurs.

    How to solve the problems when you install or uninstall programs on a Windows computer.

  • Shortcut Ctrl C does not work in the main window of Firefox

    I use Firefox version 38.0.5, Windows 7
    Since the update Ctrl + C shortcut does not work in the main window of Firefox. (I can't copy text from any website using Ctrl + C).

    Click right and using the copy in the menu works perfectly. CTRL V and Ctrl X work fine without problem.

    Ctrl C works fine when copying text from the address bar and search bar, I just can't copy anything from anything in the main window of firefox.

    I tried to run Firefox in safe mode, I have also reset firefox and a virus scanner, but nothing has solved the problem.

    If anyone has any suggestions, that would be great. Thank you

    See:

    • bug 1173979 - copy Ctrl + C is broken in the last Irish FF 38.0.5

    Please, do not comment in bug reports
    https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

  • Apple Software Update will NOT work after upgrading to Windows 7

    Apple Software Update will NOT work after upgrading to Windows 7

    flyboy340 wrote:

    Apple Software Update will NOT work after upgrading to Windows 7

    More information is needed.

    Which machine you use, OS X are you running?

    Windows 7 running in BootCamp?

    The OS X app store is not present at all?

    AppStore is present but the update tab does not?

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • HP Pavilion TouchSmart 14-n013: touch not working after updates on Windows

    Hello

    My touch screen stopped working after updates of Windows on my laptop froze. I went through all the parameters of the pen and touch, and others to resolve this issue, and unfortunately it still does not. I also rebooted the laptop to factory settings and update all the necessary things in the software updated and updates on the HP site recommended and I've updated the BIOS, but still the touch screen does not work.

    I hope you can help.

    Thank you

    According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • My norton 360 will not work after reinstalling. error 104 8504

    My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

    Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

    Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

    If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

    Good luck.

  • Key ESC Office keyboard does not work on desktop running Windows 7 Pro 64 x

    Key ESC Office keyboard does not work on desktop running Windows 7 Pro 64 x

    Now, it's a boring, which several other users have reported under different threads. Because I couldn't find a post with quite similar symptoms, I made my own topic.

    I am running Windows 7 Professional 64 x on an old one (Intel Quad-Core, 4 GB RAM, 524 GB HDD - in case, for reasons unknown to me, someone needs to know it...) , DellXPS system. Not more than a few weeks ago my home button keyboard unresponsive on this system.

    I did a lot of troubleshooting, but these measures have been carried out:
    * Tested keyboard on the other system, touch ESC WORKS on the other system
    * Reinstalled keyboard and USB drivers on the XPS system, ESC key does NOT WORK on the XPS system
    * Connected to a never-before-used USB keyboard, ESC key does NOT WORK on the XPS system
    * Opened and cleaned the keyboard, tested, Escape key WORKS, Don't DO NOT WORK on the XPS system
    * Tested in various applications: Desktop (Esc will close the start menu), Photoshop, Vegas, Notepad, games full screen OpenGL,Escape key does NOT WORK on the XPS system
    * Google for possible solutions, none found...

    Note: Highlights show where the ESC key does not work. I am troubled by the XPS system.

    In case you missed it my list of troubleshooting steps, the ESC key works on another computer of Windows 7 system.

    I have to still garble my self through the registry in the hope that someone might have an idea of the steps to follow before I lose a day to see the things that I honestly know squat. Please help if you can; What could be the issue/common application that separates this key in the Windows world and how could I solve this problem?

    Thank you in advance!

    For reference,.
    No major changes have been made since the keyboard unresponsive with the exception of:
    Updates to FireFox (including modules Ad-Block Plus, NoScript, which have also been updated).
    Windows Update
    A 10.x MB World of Warcraft patch/update on a keyboard AFTER week unresponsive

    Already installed the patches StarCraft II and World of Warcraft, which none touched my keyboard to my knowledge. I finished almost all of StarCraft II and had no problems...

    I know it's a bit old, but I was living the question myself.  Thought I had found the problem and it was fixed but then it happened again.  Came to find out (by closing a program and test the ESC key) it's because Photoshop.

    With the help of Photoshop, which could match the case you mention.  Not only that but I did a search ('ESC' does not not Photoshop) and stumbled on some answers/solutions workaround for it.  One is to use SHIFT + ESC ESC does not work.

    Hope this helps someone.  I fell it using my original research ("Windows 7" BSE "ESC" keyboard does not) and know that others are likely to see.  If you have not already learn the cause, in the year + since your original message, then voila.

  • my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    I downloaded the former driver of windows 7 touchscreen and it worked

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

    Hello

    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards

    Joe

    SOLVED!


    I uninstalled VMware Player, including the abolition of the configuration files.


    re-installed VMware Player and it worked!

  • My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

    My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

    I hope this will help:

    Error 213:19 | Problem is the license for this product

  • Satellite L850 - Bluetooth does not work after upgrade to Windows 10

    After the upgrade of the W10, BT did not work so I updated the drivers Atheros AR3012 version 10.0.1.1

    It still does not work. My phone can see the laptop on BT, but says that he cannot communicate with him.

    The laptop does not tosee phone & Yes the phone is discoverable. My BT headset can not be seen now by phone.
    All this worked fine with W7

    My laptop is Satellite L850 (PSKDLE)
    Any ideas?

    Hello

    In most cases, BT does not work due to lack of BT software.
    I guess you will need to install the filter for the BT driver package.

    In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10... Then try to install the Atheros Bluetooth driver filter package and check to see if you will be able to activate BT

Maybe you are looking for