SSH permissions

Similar Questions

• PowerCLI start and stop ssh and necessary permissions vcenter

  We will use VMA PowerCLI for start and stop SSH via vcenter for guests ESXi 4.1. We do what we're going to start ssh, security nessus scan performance and then stop ssh. We are very pleased with the commands of VMA PowerCLI for this and I've seen a number of articles on this topic. What we have done is create a specific AD user, we will use by PowerCLI to connect to vCenter and perform the beginning and stopy of SSH. I want to do is to restrict this user with a specific in vCenter privilege so that this user can only start and stop SSH. Is there a specific privilege in vCenter I can create a role for and assign it to that user.

  Yes, the host and then Config

• org failed. OpenBSD.ssh - agent

  Since the update to 10.11.5 ssh is unusable.  He seems to be trying to connect to ssh-agent, but can simply start ssh-agent (what follows comes from the console):

  23/05/16 21:51:58.714 com.apple.xpc.launchd [1]: (org.openbsd.ssh - agent [12462]) Service came out with abnormal code: 1

  23/05/16 21:51:58.714 com.apple.xpc.launchd [1]: Service (org.openbsd.ssh - agent) lasted only 10 seconds. Push the respawn in 10 seconds.

  I tried setting permissions and clear a few things, but I'm bumping into SIP and almost my end.  Anyone has any ideas of things to try?  It also affects ssh - add (which makes sense, because which would add ssh key to the agent).

  Please after the output of this command:

  ls -@BOaen .ssh

  If any personal information appear in the output, anonymize before posting, but do not remove the context.

• SSH and SMB service starts not more

  Dear community,

  After you have installed the Add-it-Analyzer Log my RN10200 started having some problems that I was not able to see the shares via Samba more. I tried to connect via SSH to see what is the problem, but also the SSH no longer works. Since the web-admin panel still works, I tried to enable SMB and SSH in the Panel, but it briefly passes green and gray then again. I also tried to uninstall the add-on, but now get a package manager error. I then tried to reinstall the operating system using the boot option, but that did not help either.

  I removed the hard disks in the unit and their read-only to see what is poorly mounted. There, I found some permissions to be set wrong on the system partition:

  / mnt/systemOld # ls - la
  Total 124
  drwxr-xr-x 26 root root 4096 May 19 21:03.
  drwxr-xr-x 4 root root 4096 24 May 07:04...
  drwxr-xr-x 2 root root 4096 may 5, 2015 apps
  drwxr-xr-x 2 root root 4096 19 May 19:51 bin
  drwxr-xr-x 2 root 4096 17 June 2012 boot root
  drwxrwxrwt 2 root 4096 5 may 2015 given root
  drwxr-xr-x 4 root root 4096 19 May 19:51 dev
  drwxr-xr-x 79 root root 4096 19 May 21:32 etc.
  drwxr-xr-x 6 guest invited 4096 19 May 19:51 frontview
  drwxr-xr-x 2 root 4096 17 June 2012 home root
  lrwxrwxrwx 1 comments 5 houses 18 July 2015-> / home
  drwxr-xr-x 14 Guest invited 4096 19 May 19:51 lib
  drwxrwxrwx 2 Guest invited 16384 5 may 2015 lost + found
  drwxr-xr-x 2 root root 4096 media of 18 November 2012
  drwxr-xr-x 3 root root 4096 mnt 17 June 2012
  drwxr-xr-x 9 root root 4096 Nov 26 10:59 opt
  drwxr-xr-x 2 root root 4096 proc 17 June 2012
  -rwxrwxrwx 1 comments 1024 may 5, 2015 .rnd
  drwx - 5 root root 4096 May 19 19:51 root
  drwxr-xr-x 3 guest invited 4096 19 May 17:52 rsyslog
  drwxr-xr-x 2 root 4096 run of 18 August 2015 root
  drwxr-xr-x 2 4096 invited guest 19 May 19:51 sbin
  drwxr-xr-x 2 root root 4096 selinux 10 June 2012
  drwxr-xr-x 2 4096 comments 18 November 2012 srv
  drwxr-xr-x 2 root root 4096 sys 8 February 2013
  drwxrwxrwt 7 guest invited 4096 19 May 21:32 tmp
  -rwxrwxrwx 1 invited guest 33 19 May 17:48 .update_fail
  drwxr-xr-x 10 root root 4096 Nov 26 10:59 usr
  drwxr-xr-x 18 root root 4096 May 19 19:51 var

  Instead of:

  ls - la /.
  total 120
  drwxr-xr-x 26 root root 4096 23 May 07:40.
  drwxr-xr-x 26 root root 4096 23 May 07:40...
  drwxrwxrwx 1 root root 116 23 May 20:45 apps
  drwxr-xr-x 2 root root 4096 23 May 07:39 bin
  drwxr-xr-x 2 root 4096 17 June 2012 boot root
  drwxr-xr-x 1 root root 250 given may 22, 10:36
  drwxr-xr-x 13 root root 3480 23 May 20:53 dev
  drwxr-xr-x 79 root root 4096 23 May 20:46 etc.
  drwxr-xr-x 6 root root 4096 23 May 07:39 frontview
  drwxr-xr-x 1 admin admin 0 19 May 22:17 home
  drwxr-xr-x 14 root root 4096 23 May 07:39 lib
  drwx - 2 root root 16384 19 May 22:17 lost + found
  drwxr-xr-x 2 root root 4096 19 May 22:49 md124
  drwxr-xr-x 4 root root 80 May 23 20:53 media
  drwxr-xr-x 4 root root 4096 24 May 07:04 mnt
  drwxr-xr-x 9 root root 4096 May 13 16:48 opt
  root of Dr-xr-xr-x 188 root 0 1 January 1970 proc
  -rw - 1 root root 1024 19 May 22:17 .rnd
  drwx - 3 root root 4096 23 May 07:39 root
  drwxrwxr-x 26 root admin 820 run 23 May 20:53
  drwxr-xr-x 2 root root 4096 23 May 07:39 sbin
  drwxr-xr-x 2 root root 4096 selinux 10 June 2012
  drwxr-xr-x 2 root root 4096 srv 18 November 2012
  Dr-xr-xr-x 11 root root 0 may 24 07:05 sys
  drwxrwxrwt 7 root root 4096 24 May 07:17 tmp
  -rw - r - r - 1 root root 0 23 May 07:38 .update_success
  drwxr-xr-x 10 root root 4096 13 May 16:48 usr
  drwxr-xr-x 17 root root 4096 23 May 07:39 var

  could be the cause of the problem? Other ideas how to get SSH and SMB work return service or more diagnostic information?

  I have a backup of everything so a complete reset would be an option. However, I would like to understand the problem and solve it rather by using telnet, as seems to be a simple problem? It would be enough to reset permissions? What else could be causing this behavior?

  Thanks for the tips

  Best

  Steffen

  You will have to go folder by folder and read all the files, he complains and chown the permissions back to root instead of comments. Loïc but eventually you can get everything again.

• Configuration of the ACL to restrict access via SSH/Telnet

  You want to shoot a SSH/Telnet access to ISP address/IP of my switch interface.  Since the Dells have no strict vty/con interface to apply an ACL I guess I just have to match on an interface instead.  Using the ACL below.  Problem is that applying it kills telnet/ssh sessions completely and does them in.  Replaced the iPs in the wrong example with IPs.  Confirm that my public IP address is 112.94.236.58.  You will see a 112.94.236.56/29 with a permit instruction.

  TEST from the list of access permitted tcp 111.126.50.0 255.255.255.0 111.126.50.16 255.255.255.0 eq 22

  TEST from the list of access permitted tcp 111.126.50.0 255.255.255.0 111.126.50.16 255.255.255.0 eq telnet

  TEST tcp allowed access list 112.94.236.56 255.255.255.248 111.126.50.16 255.255.255.0 eq 22

  TEST the access permitted tcp 112.94.236.56 list 255.255.255.248 111.126.50.16 255.255.255.0 eq telnet

  TEST from the list of access permitted tcp 112.94.254.0 255.255.255.128 111.126.50.16 255.255.255.0 eq 22

  TEST from the list of access permitted tcp 112.94.254.0 255.255.255.128 111.126.50.16 255.255.255.0 eq telnet

  TEST the access permitted tcp 112.94.248.176 list 255.255.255.248 111.126.50.16 255.255.255.0 eq 22

  TEST the access permitted tcp 112.94.248.176 list 255.255.255.248 111.126.50.16 255.255.255.0 eq telnet

  access list tcp TEST refuse any 111.126.50.16 255.255.255.0 eq 22

  access list tcp TEST refuse any 111.126.50.16 255.255.255.0 eq telnet

  TEST the ip access list allow a whole

  111.126.50.16 is the switch

  Maybe I should use a destination host in the ACL instead?  (edit, nope, tried with a subnet of 255 s all, same problem)

  The ACL is created using the command access-list config mode.  On the interface it won't let me use ip access-class.

  Figured it out.  Kept, see references to "MACL", think why I needed a MAC access control list.

  Nope.

  Dell world, this means access control list management.

• SSH session with QNX momentics-> cannot run - permission denied

  Hello everyone I am new to this world to develop a blackberry and I have a question about ssh, it can be quite simple, but a simple tip could save me from going crazy.

  When I open an ssh session with my blackberry and try to execute statements such as ping, it is said:

  Ping $
  SH: ping: cannot run - permission denied

  So my question is: is there a way to access these permissions and run the command?

  I use qnx momentics, a real device and access the ssh by qnx momentics option launch a ssh session.

  I'd appreciate any advice or tips or whatever it is that one can say to help me, thanks in advance

  When you connect via SSH, logged as "devuser". This user has limited permissions... basically these permissions that would be a regular application.

  To run the 'ping', you need a higher level of access. (Check permissions and ownership with "ls-l/usr/bin/ping") This isn't an option, so the answer is no, there is no way to do it.

• SSH connection on SAA issue.

  Hello

  I configured to connect to the outside using ssh ver 1/2 on the SAA. but I can't connect using SecureCRT and PuTTY ssh client software...

  In addition, I have tred to connect outside the witch ASA router ssh command.

  but the result is the same...

  Here is the configuration on SAA.

  I would like to know why I can't connect external interface of the ASA.

  ASA Version 7.1 (2)

  !

  hostname ASA 5540

  cisco.com-domain name

  enable password xxxx

  names of

  !

  interface GigabitEthernet0/0

  Description * Outside *.

  nameif outside

  security-level 0

  IP 192.168.200.2 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description * inside *.

  nameif inside

  security-level 100

  192.168.100.2 IP address 255.255.255.0

  !

  interface GigabitEthernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  Description * management only *.

  nameif management

  security-level 0

  IP 192.168.250.2 255.255.255.0

  management only

  !

  passwd xxxx

  boot system Disk0: / asa712 - k8.bin

  passive FTP mode

  DNS server-group DefaultDNS

  cisco.com-domain name

  permit same-security-traffic inter-interface

  pager lines 24

  Enable logging

  logging of debug asdm

  Debugging trace record

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 management

  no failover

  ASDM image disk0: / asdm512.bin

  don't allow no asdm history

  ARP timeout 14400

  Route outside 0.0.0.0 0.0.0.0 192.168.200.1 1

  Route inside 172.16.0.0 255.255.0.0 192.168.100.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00

  Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  xxxx xxxx password username

  privilege 15

  xxxx xxxx privilege 15 password username

  Enable http server

  http 0.0.0.0 0.0.0.0 outdoors

  http 0.0.0.0 0.0.0.0 inside

  http 0.0.0.0 0.0.0.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Telnet 0.0.0.0 0.0.0.0 inside

  Telnet 0.0.0.0 0.0.0.0 management

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH timeout 60

  Console timeout 0

  access to administration management

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  Policy-map global_policy

  class inspection_default

  inspect the dns-length maximum 512

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  !

  global service-policy global_policy

  des-sha1 encryption SSL rc4 - md5

  Cryptochecksum:xxxx

  : end

  ]

  Router #ssh-l cisco - c of the 192.168.200.2.

  Password:

  % Authentication failed.

  [Connection to 192.168.200.2 closed by foreign host]

  Router #.

  You must specify the authentication method.

  the ssh LOCAL console AAA authentication

  for example.

  SSH x.x.x.x x.x.x. inside | for increased security outside

  Hope this helps,

  THX

  Jay

• Ssh/telnet/web ASA5505 question

  I can't access this ASA everywhere except the console.

  I'm no expert, ASA, but I compared it to others I have configured asa, and I can't find the error of my ways.

  It is expected to be easy, I just need a different set of eyes looking at it now. I hope I don't have too much censor, but I imagine that if I am able to SSH locally, will fix all issues of access I have.

  :
  ASA Version 7.2 (4)
  !
  host name X
  domain X.local
  activate the encrypted password of XXXXXXXXXXXXXXXXXXX
  passwd encrypted XXXXXXXXXXXXXXXX
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.27.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !

  Banner motd to USE OFFICIAL ONLY. Unauthorized use prohibited
  Banner motd people who use this computer system is subject to having all
  Banner motd of their activities on this system monitored and recorded without
  new notice of Banner motd. Audit of users may include surveillance of the strike.

  boot system Disk0: / asa821 - k8.bin
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT
  DNS lookup field inside
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  Server name X.X.X.12
  Name-Server 4.2.2.2
  domain pain.local
  permit same-security-traffic intra-interface
  object-group service XX tcp - udp
  60000 64999 object-port Beach
  object-group network MySpace
  object-network 67.134.143.0 255.255.255.0
  object-network 204.16.32.0 255.255.255.0
  network-object 216.178.32.0 255.255.224.0
  object-group network Facebook
  object-network 69.63.176.0 255.255.255.0
  object-network 204.15.20.0 255.255.255.0
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  the DM_INLINE_NETWORK_1 object-group network
  object-network 10.x.x.0 255.255.255.0
  object-network 172.x.x.0 255.255.255.0
  object-network 10.x.x.0 255.255.255.0
  object-network 10.x.x.0 255.255.255.0
  object-network 10.x.x.0 255.255.255.0
  object-network 172.x.x.0 255.255.255.0
  the LocalLAN object-group network
  X subnet Local 192.168.27.x description
  object-network 192.168.27.0 255.255.255.0
  the DM_INLINE_NETWORK_2 object-group network
  object-network 10.x.x.0 255.255.255.0
  object-network 10.x.x.0 255.255.255.0
  object-network 10.x.x.0 255.255.255.0
  object-network 10.x.x.0 255.255.255.0
  object-network 172.x.x.0 255.255.255.0
  object-network 172.x.x.0 255.255.255.0
  the DM_INLINE_NETWORK_3 object-group network
  network-host 64.x.x.x object
  network-host 71.x.x.x object
  network-host 74.x.x.x object
  network-host 99.x.x.x object
  network-host 173.x.x.x object
  object-network 192.168.27.0 255.255.255.0
  object-network 192.168.1.0 255.255.255.0
  192.168.27.0 IP Access-list extended sheep 255.255.255.0 allow object-group DM_INLINE_NETWORK_1
  outgoing extended access-list deny ip any object-group inactive MySpace
  outgoing extended access-list deny ip any object-group inactive Facebook
  outgoing to the icmp a whole allowed extended access list
  coming out to the one permitted all ip extended access list
  extended access-list extended permitted ip object-LocalLAN group DM_INLINE_NETWORK_1 object
  outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_3 all
  outside_cryptomap list extended access permitted ip object-group LocalLAN-group of objects DM_INLINE_NETWORK_2
  pager lines 24
  Enable logging
  timestamp of the record
  registration of emergency critical list level
  exploitation forest-size of the buffer 1048576
  emergency logging console
  monitor debug logging
  recording of debug trap
  notifications of logging asdm
  address record [email protected] / * /
  exploitation forest-address recipient [email protected] / * / level of errors
  exploitation forest-address recipient [email protected] / * / critical level
  logging feature 23
  forest-hostdown operating permits
  registration of emergency of class auth trap
  record labels of class config trap
  record labels of class ospf trap
  logging of alerts for the vpn trap class
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any inside
  ICMP allow all outside
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0 access-list sheep
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 192.168.X.X 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  AAA authentication enable LOCAL console
  the ssh LOCAL console AAA authentication
  AAA authentication http LOCAL console
  Enable http server
  x.x.x.x 255.255.255.255 out http
  http 0.0.0.0 0.0.0.0 outdoors
  http 0.0.0.0 0.0.0.0 inside
  http 192.168.1.0 255.255.255.0 inside
  http 192.168.27.0 255.255.255.0 inside
  redirect http outside 80
  No snmp server location
  No snmp Server contact
  Community SNMP-server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Sysopt connection tcpmss 1360
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec df - bit clear-df outdoors
  card crypto outside_map 2 match address outside_cryptomap
  card crypto outside_map 2 set pfs
  card crypto outside_map 2 peers set x.x.x.x
  card crypto outside_map 2 game of transformation-ESP-AES-128-SHA
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  aes encryption
  sha hash
  Group 5
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  enable client-implementation to date
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 60
  Console timeout 0
  management-access inside
  dhcpd 10.x.x.x 4.2.2.2 dns
  dhcpd field pain.local
  dhcpd outside auto_config
  dhcpd option 156 ascii ftpservers = 10.x.x.x
  dhcpd option 42 ip 208.66.175.36
  !
  dhcpd address 192.168.27.2 - 192.168.27.33 inside
  dhcpd allow inside
  !

  NTP-1 md5 authentication key *.
  authenticate the NTP
  NTP server 10.x.x.x source inside
  username XXXXXXXXX XXXXXXXXXXXXXX encrypted privilege 15 password
  tunnel-group 64.X.X.X type ipsec-l2l
  IPSec-attributes tunnel-group 64.X.X.X
  pre-shared key X
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  : end

  The party concerned to control where you are allowed to SSH in the ASA are these lines:

  ssh 0.0.0.0 0.0.0.0 inside
  ssh 0.0.0.0 0.0.0.0 outside
  

  But you have generated public/private keys?

  ASA (config) # crypto key generate rsa key general module 2048

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• SSH specific IP access

  Hello

  I have configured 10 interface vlan on my cisco 6509 switch.

  However, I want my SSH users on IP management only. SSH access on other PIS (defined for each interface vlan) should be blocked by the switch.

  Please suggest how to configure it.

  Thanks in advance.

  The best way to achieve this is to bind an access list to your vty line. This access list is normally a standard ACL, but this time you use an extended ACL that uses your IP management as a destination:

  EDIT: No, it doesn't work as proposed. Please see the other posts.

  MGMT-TRAFFIC extended IP access list

  permit tcp SOURCE-NET host 10.10.10.10 eq 22

  line vty 0 4

  access-class MGMT-TRAFFIC

  In this example, SOURCE-NET is the IP network hence your traffic management comes and 10.10.10.10 is managing IP on your device.

• How the router can understand protocols such as SSH or telnet

  How the router can understand protocols such as SSH or telnet
  and device for layer 3 router

  second question, I found this accessory of CCNA security book Keith Barker
  wrote it router look at application layer information how?

  Thank you in advance.

  Hello

  I think that confuse you routing process.

  Router; route packages using their layer 3 address.

  This means not router cannot understand the upper layer protocols. There just transmission by addressess of layer 3.

  for example: we can define Access-list for tcp and udp layer 4 packets. router can decide whether to permit or refuse even if these lists filter by glance in the section layer 4 of the package.

  In an SSH or Telnet session, role of the router is terminal.

  Intermediate device belongs in the the router routing process.

  Best regards.

• SSH to the external interface

  How to configure ssh on the external interface of the asa? I have defined an applied, external interface access list, but it did not work for some reason any

  Here is a list of access

  interface GigabitEthernet0/1

  nameif outside

  security-level 0

  IP 10.254.17.9 255.255.255.248

  !

  interface GigabitEthernet0/2

  No nameif

  security-level 100

  no ip address

  !

  interface GigabitEthernet0/3

  EIGRP 2008 description

  nameif eigrp

  security-level 100

  IP 10.40.50.65 255.255.255.252

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.251.1 255.255.255.0

  management only

  !

  boot system Disk0: / asa821 - k8.bin

  passive FTP mode

  access-list 110 scope ip allow a whole

  NAT allowed ip extended access list a whole

  allow_ping list extended access permit icmp any any echo response

  allow_ping list extended access permit icmp any any source-quench

  allow_ping list extended access allow all unreachable icmp

  allow_ping list extended access permit icmp any one time exceed

  allow_ping list extended access udp allowed any any eq isakmp

  allow_ping list extended access allow esp a whole

  allow_ping ah allowed extended access list a whole

  allow_ping list extended access will permit a full

  allow_ping list extended access permit tcp any any eq ssh

  access-list extended ip allowed any one sheep

  icmp_inside list extended access permit icmp any one

  icmp_inside of access allowed any ip an extended list

  pager lines 24

  asdm of logging of information

  Outside 1500 MTU

  EIGRP MTU 1500

  management of MTU 1500

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow all outside

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  Access-group allow_ping in interface outside

  Can't say I've seen this before, but SSH is easy to do on the SAA.

  I recommend you to take out the first interface access list to see if that would be it.

  You have published only a partial section of the config, but make sure you have the SSH command with the address of the subnet that you connect from. Your config is no longer visible as I type this but try "SSH 0.0.0.0 0.0.0.0 outdoors. This allows all subnets access to the external interface. This command works as an access list to restrict connectivity to approved subnets. i.e. ' SSH 10.0.0.0 255.0.0.0 out "only allow hosts on the 10.x.x.x network to connect via SSH.

  Turn 'debug ssh' to see what errors are too.

  And, you can always remove your keys (related encryption rsa key) and rebuild their return (encryption key generate rsa 1024 mod gen). This will make your ssh client, I use PuTTY, think that this is a new feature and invites the OK to connect.

  Good luck.

  Kevin

• RV180 ssh and https Wan?

  HY everybody.

  Is it possible to manage the RV180 of the side WAN via https and ssh?

  In addition, is still available LAN ssh?

  Kind regards

  F.

  Flavio,

  The RV180 only supports the management remotely via http or https. The Cisco small business routers do not support ssh or telnet.

  You can enable HTTPS and remote management on the Cisco LAN interface

  RV180/RV180W. If a user connects to a PC to the LAN port, web access is

  a permit by using secure HTTP (HTTPS).

• in PIX with SSH connection issues

  Hello

  I have a PIX 506 running OS 6.2 (2) which is located in a demilitarized zone known as the PIX from the outside. It's behind an another PIX506 (PIX inside). The two PIX have Ganymede + configured for authentication of the connection.

  Last week the outdoor PIX crushed physically and I replaced it with a spare PIX part and he completely reconfigured.

  Now I can't connect to this outside PIX using SSH, despite the list of access inside PIX is correct and can SSH and Ganymede +. However, I can telnet to it.

  I use Putty to connect and when I start the session SSH from the PIX, the login window appears and disappears immediately without having the time to do anything myself.

  Any help would be greatly appreciated. Thanks in advance.

  A.G.

  ##################################################

  Inside PIX config:

  access-list inside allow TCP Company-Interior-Net 255.255.255.0 host outsidepix-Interior-interface eq ssh

  list Company-Interior-Net 255.255.255.0 access inside permit tcp host eq telnet interface-inside-outsidepix

  access-list inside allow the ICMP messages to echo DMZNet 255.255.255.192 Company-Interior-Net 255.255.255.0

  access-list inside allow Company-Interior-Net icmp 255.255.255.0 DMZNet 255.255.255.192 - response to echo

  dmzacl list of access allowed icmp echo host outsidepix-Interior-interface company-Interior-Net 255.255.255.0

  dmzacl list of access allowed icmp host outsidepix-Interior-interface company-Interior-Net 255.255.255.0 - response to echo

  access-list permits dmzacl tcp host outsidepix-Interior-interface host Ganymede-server1 eq Ganymede

  access-list permits dmzacl tcp host outsidepix-Interior-interface host Ganymede-server2 eq Ganymede

  The outdoor PIX config:

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + (inside) host Ganymede-server1 1234 timeout 10

  AAA-server GANYMEDE + (inside) host Ganymede-server2 1234 timeout 10

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Console telnet authentication GANYMEDE AAA +.

  the AAA console ssh GANYMEDE authentication +.

  AAA authentication enable console GANYMEDE +.

  Telnet Company-Interior-Net 255.255.255.0 inside

  Telnet timeout 5

  SSH-company-Interior-Net 255.255.255.0 inside

  SSH DMZNet 255.255.255.192 inside

  SSH timeout 5

  did you follow the steps to configure ssh? the domain name and host name is defined on it? CA has generated you any rsa... to create the encryption keys?

• Simple Question SSH Access-List

  I am allowing SSH access for all of our Cisco devices and you want to restrict access to all the following ip addresses: 192.168.200.1 - 192.168.200.50.  I forgot the exact configuration of access list to achieve this.  The subnet is 24 and I don't want the whole subnet - seulement.1-. 50.

  Thank you

  Thomas Reiling

  Hello

  If you use ssh, make sure that you have a domain name, host name and a rsa key is generated.  Assuing you have done this, the command vty ACL and following line will do the trick.  Note that the host 1-50 list is not on a subnet barrier.

  To get it exactly

  access-list 1 remark MANAGEMENT ALLOW
  access-list 1 permit 192.168.200.0 0.0.0.31

  access-list 1 permit 192.168.200.32 0.0.0.15

  access-list 1 permit 192.168.200.48 0.0.0.1

  host access-list 1 192.168.200.50

  access-list 1 refuse any newspaper

  It would be a good idea to put it on a limit, however, so the following would be much simpler and easier to read.

  access-list 1 remark MANAGEMENT ALLOW
  access-list 1 permit 192.168.200.0 0.0.0.63

  access-list 1 refuse any newspaper

  Apply the class of access on the vty lines and authentication, I would put something there too.

  line vty 0 4
  access-class 1
  entry ssh transport

  password Bonneau

  That should do it.

  Good luck!

  Brad

• 1841 = > unable to connect via SSH

  I am able to connect to the router via a tunnel of crypto isakmp using telnet. However, I'm unable to configure SSH on this thing. Can someone help me please in what I may be missing. I'm now at an impasse. I posted the router info and entered similar below.

  Software Cisco IOS, 1841 Software (C1841-ADVSECURITYK9-M), Version 12.4 (3), SOFT VERSION

  WARE (fc2)

  ======================================

  domain IP CISCO$ .COM

  property intellectual ssh time 60

  property intellectual ssh port 2222 Rotary 1

  property intellectual ssh source interface FastEthernet0/0

  property intellectual ssh version 2

  ======================================

  scope of CISCO IP access list

  permit tcp x.x.x.x where x.x.x.x any eq 2222

  deny ip any any newspaper

  access-list 101 permit tcp x.x.x.x where x.x.x.x any eq telnet

  access-list 101 tcp refuse any any eq telnet log

  ==========================================

  line vty 0 4

  access class 101 in

  exec-timeout 3 0

  password XXXXXX

  transport of entry all

  transportation out all

  line vty 5 15

  CISCO access class in

  password: xxxxxxxx

  transport input telnet ssh

  exit telnet ssh transport

  =====================================

  which seems good...

  What happens when you do a sh ip ssh?

  Is there any firewall or ACL blocking port 22?