SSH connection on SAA issue.

Similar Questions

• Cann't open web access, ssh connection between host and bridged the VM in network mode

  I have a VMware workstartion 7.0 is installed on a machine XP 64 (192.168.2.44). I have the following virtual machines.

  1 ESX 4.0 (192.168.2.42)

  2 ESX 3.5 (192.168.2.38)

  3. windows server 2003 with vCenter installed. (192.168.2.100)

  4. Windows server 2003 with the roles of DNS and DC. (192.168.2.101)

  I am trying to connect to vCenter or ESX VM of the XP hosting web interface. However I can't get through. but I can ping and I can also telnet to ports 443, 80. Even I can't ssh connection. When I use putty, it is actually connected but no response from the ssh server. Looks like the network connection is there, somehow the server process responds simply not properly once the connection is established.

  BTW, all of them use bridged network, they all 192.168.2.x IPs. I can connect to vCenter, ESX web interface from another computer without problem.

  Just wonder if anyone else has experienced this before. I have tried to search the forum, did not find a similar question.

  Thank you!

  Tong

  Your host, try to disable (temporarily) a "discharge" for the NIC settings.

  http://KB.VMware.com/kb/1015940

  If this solves the problem, other threads on this issue have mentioned that a fix for this will be included in the next version of the 'point' of Workstation 7 (as 7.1, etc).

• GS752TS SSH connection

  Hello world!

  I had a GS752TS switch and I want to manage it remotely using SSH.

  But I can't find information on the SSH connection.

  I use Putty and it cannot connect. I also looked for the switch configuration: maintenance-online troubleshooting, but I can't find option diagnosis remotely.

  Is it possible to manage this remote switch and if so, how?

  Thanks for your response!

  Hi Ahiro

  Welcome to the community!

  You can't manage a Smart Switch managed using SSH or command line. Instead, a smart switch is managed Web interface (GUI) through HTTP used.

  Command-line (CLI) and Telnet/SSH are one of the differences between Smart switches and managed fully managed.

  If you need SSH on Putty, you should take a look at our excellent series M4100, profitable L2 + fully autonomous here managed switches:

  http://www.NETGEAR.com/managed

  Kind regards

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• Remote SSH connection fall

  Hello

  I have a Cisco 1721 I configured to allow SSH connections in the Internet router on port 2922. For some reason, the SSH connection randomly gets abandoned, most of the time in the middle of typing a command. I don't think it is related to the length of time that I have in the router because I can't rest, usually more than 4 minutes. Any kind of help would be appreciated.

  Thank you

  Brandon

  Hello.. I have my doubts about your static NAT configurations... If you change the access list applied to the ethernet0 (102) and allow ssh (port 22) you can ssh on port 22 of the router E0 IP address Outside... ? .. If the connection is stable and you can then your static NAT might be the cause of the problem.

  I hope this helps... Please, write it down if that is the case!

• Why is the SSH connection default for AMS on the market of the amsadmin AWS?

  We don't want default password on AWS authentication, we want key authentication. Why you guys don't force auth password?

  Adobe Media Server 5 scope on the market of the AWS

  AMS on AWS insists to reset the password for the first ssh connection is made. Once the password is reset, the session disconnects automatically for security reasons and subsequently, he need only key authentication.

• in PIX with SSH connection issues

  Hello

  I have a PIX 506 running OS 6.2 (2) which is located in a demilitarized zone known as the PIX from the outside. It's behind an another PIX506 (PIX inside). The two PIX have Ganymede + configured for authentication of the connection.

  Last week the outdoor PIX crushed physically and I replaced it with a spare PIX part and he completely reconfigured.

  Now I can't connect to this outside PIX using SSH, despite the list of access inside PIX is correct and can SSH and Ganymede +. However, I can telnet to it.

  I use Putty to connect and when I start the session SSH from the PIX, the login window appears and disappears immediately without having the time to do anything myself.

  Any help would be greatly appreciated. Thanks in advance.

  A.G.

  ##################################################

  Inside PIX config:

  access-list inside allow TCP Company-Interior-Net 255.255.255.0 host outsidepix-Interior-interface eq ssh

  list Company-Interior-Net 255.255.255.0 access inside permit tcp host eq telnet interface-inside-outsidepix

  access-list inside allow the ICMP messages to echo DMZNet 255.255.255.192 Company-Interior-Net 255.255.255.0

  access-list inside allow Company-Interior-Net icmp 255.255.255.0 DMZNet 255.255.255.192 - response to echo

  dmzacl list of access allowed icmp echo host outsidepix-Interior-interface company-Interior-Net 255.255.255.0

  dmzacl list of access allowed icmp host outsidepix-Interior-interface company-Interior-Net 255.255.255.0 - response to echo

  access-list permits dmzacl tcp host outsidepix-Interior-interface host Ganymede-server1 eq Ganymede

  access-list permits dmzacl tcp host outsidepix-Interior-interface host Ganymede-server2 eq Ganymede

  The outdoor PIX config:

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + (inside) host Ganymede-server1 1234 timeout 10

  AAA-server GANYMEDE + (inside) host Ganymede-server2 1234 timeout 10

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Console telnet authentication GANYMEDE AAA +.

  the AAA console ssh GANYMEDE authentication +.

  AAA authentication enable console GANYMEDE +.

  Telnet Company-Interior-Net 255.255.255.0 inside

  Telnet timeout 5

  SSH-company-Interior-Net 255.255.255.0 inside

  SSH DMZNet 255.255.255.192 inside

  SSH timeout 5

  did you follow the steps to configure ssh? the domain name and host name is defined on it? CA has generated you any rsa... to create the encryption keys?

• Satellite P50T-A-125 - connectivity Wi - Fi issues

  I have major problems connecting to WiFi with your laptop by Satellite P50t-A-125.
  We have 3 of these laptops in the House, but only have WiFi connection problems with one of them.

  No matter where the laptop (home, hotel, etc. overseas), the problem is the same.
  It will connect to the local WiFi "hot spot" / hub, but does not connect to the internet and the "limited connectivity" message appears.

  It is a problem very annoying and tedious, help or advice to fix it would be greatly appreciated.

  Best regards - SSG.

  Hello

  I think you should start by WLan driver update.
  For the most part, limited connection issues could be resolved by Wlan updated driver.

  I know the laptop was equipped with Intel Wireless-N 7260 more Bluetooth Wlan card

  The latest driver for this Intel page could be downloaded from the Intel Web site:

  [Intel® Wireless - N 7260 | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+ Networking & ProductLine = Intel % C2% AE + Wi - Fi + products & ProductProduct = Intel % C2% AE + Wireless-N + 7260 & ProdId = 3713 & LineId = 1784 & FamilyId = 1783]

  Your comments appreciated

• Connectivity w/sound issues

  I find it difficult to get the sound from my TV when connected to my computer with a HDMI cable; but once had the opportunity to get sound.  I think that something has been disconnected by the computer.  Can someone help me please?

  Thank you
  Jacqi_3

  Hey Jacqi,

  The issue can be caused if the connections are not set correctly on your computer to the TV.

  1. what operating system is installed on your computer?

  2. What is the brand and model of the computer and the TV?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  I suggest following the steps described in the links to connect your TV with your computer and leave below the status of the issue.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  I hope this helps.

• How to automate the SSH connection/commands on a series of switches PowerConnect 3400 3500 and 6200 series.

  I'm trying to find a way to automate the commands to send a series of switches (about 20) showing some configs and save the output to a file. The way I was trying to do was using plink and creation of a batch of files for her.

  Essentially, it would be something similar to the following.

  ECHO for /f % in (devices.txt) plink % l word of PAST of USERNAME-pw-v - m C:\Batch\commands.txt > output.txt

  To split the above command, looking for my ips in the devices.txt and made a "plink pw - username PASSWORD - v IP-l m - COMMANDS > OUTPUT" for each. The problem, I'm running is that the switches do not accept logins, they constantly ask for the user and the password again. Even when you try to put them in the commands.txt he will not accept the entry. I googled using plink with dell switches but there is nothing to talk about this problem.

  So my question is, is it possible to automate this sort of thing in a batch file? Or some way to automate a series of commands to a switch via SSH? I'm just not wan't do manually connect to each of them, carry out my orders, out, reconnect and repeat. I did it on cisco switches so I thought the process would be similar but I don't understand what obstacle I'm running in here. Ideally, I'd like to see how to do this via SSH but at this point, I am ready to accept almost any alternative (secure) to automate the sending of orders for my switches.

  I hope that all makes sense.

  Sorry, I haven't used before plink, so I'm not sure what to change to get this to work. In the past, there was another Member of the community who has been able to use expect to establish connections to switches and save configs.

  Linux.Die.net/.../expect

  It may be somewhat more than installation, but you can be able to make it work for your needs.

  http://Dell.to/1RONL3D

  Let us know

• R710 IDRAC6 series via ssh: connect com2 returns COMMAND NOT RECOGNIZED

  Hello

  I configured successfully on ssh several times serial console redirection on different dell servers, but now I'm stuck with two R710s.

  The problem

  I can't use the connect command:

  /Admin1-> connect com2
  cmdstat
  status: 2
  status_tag: PROCESSING COMMAND FAILED
  error: 253
  error_tag: COMMAND NOT RECOGNIZED

  Configuration

  Version

  BIOS is 6.1.0, cli version output is:

  /Admin1-> version
  CLP SM Version: 1.0.2
  SM ME treat Version: 1.0.0b

  I have configured the redirection as before:

  BIOS

  Communication series	On with the Console via COM2 Redirection
  Address of the Serial Port	Device1 Serial = COM1, Serial Device2 = COM2
  Connector external series	Remote access equipment
  Failsafe baud rate	115200
  Remote Terminal type	VT100/VT220
  Redirection after boot	People with disabilities

  iDRAC

  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialBaudRate 115200
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialConsoleEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialSshEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialHistorySize 2000
  Value of the object successfully changed

  The command is now console, not connect.

  And that's exactly what is said in the docs - it's just that I had not noticed the change and read 'connect', where 'console' was written.

  A big thanks to Lars Handrick Support Dell Germany for reporting the change of command name for me.

• Place 11 Pro 7130 i3 (model no-VPro) connected ongoing sleep issues again?

  Hello

  I noticed that despite a number of improvements with the last firmware panel touch (the rare involuntary repetition of letters) and still a problem of firmware (no more wifi from the A13 firmware problem) device always on my 11 venue Pro model i3: during sleep sessions connected excessive battery drain.

  What happens is that, after leaving the appliance for 8 hours (overnight) connected standby battery has already drained almost 50%, which, as far as I understand, is much higher than that should be the case, while often after the awakening of the device, I found that another application may have open or some kind of parasite entries occurred.

  For now I've worked around the issue by disabling connected standby mode of the registry, which has the additional advantage of allowing hybernation in the stop menu. This, however, is a suboptimal solution because it seems necessary to either press the Windows logo on the chassis of tablets and THEN press the power button for a good second to wake up the unit, or with the keyboard connected, it is necessary to close the Tablet and re - open, followed by the same press the power button.

  Given that I seem to not be the only one with this problem and the lack of software updates for the device-specific over the past months, I would ask Dell if these issues of connected intelligence are still studied on the 7130 with a possible solution to come in the form of firmware updates or otherwise , or if attention was completely shifted to the model with processor Broadwell followed 7140.

  Update for the people of the future: using this version of the SD card reader driver seems to fix the problem, which should have returned to a default restart driver driver specified on the support of the 11 Pro place Web site must be installed in Windows.

• Connect on SAA with Mode activation

  I've seen a few posts on the forum on the use of AAA to connect to an ASA in enable mode.  I use a Server 2008 R2 NPS server, and I can correctly identify.  However, I use the NPS server to return the AV Cisco 'priv-lvl = 15' pair.  I expect to connect to the ASA and is located in enable mode.  I've seen refer to other posts GANYMEDE +, but we do not have ACS.  GANYMEDE is a requirement for this?  I remember reading in some other forums that this is a security feature on the SAA does not allow to connect directly to the activation of the mode.

  Kind regards
  Scott

  Scott

  I think you are right that it is a security feature of the ASA, that he will not allow you to connect to the ASA and go straight to activate the mode. I believe that this is the behavior if the authentication servers uses GANYMEDE or any other authentication protocol.

  HTH

  Rick

• GANYMEDE + failing during the web connection, succeeding the SSH connection.

  I have a Ganymede server + configured (tac_plus, freeware).  I have one point of access configured to use Ganymede + local as default authentication method.  Name of user and password works fine at the guests of SSH/vty, Console connection.  However, it fails when you try to access the web interface.  When you try to access the ip point http://[access] / he asks a login:

  The server [ap ip] request your username and password.  The server reports that it is Level_15_access.

  If I put in my credentails Ganymede, the authentication prompt appears again.

  If I add ip http authentication aaa - authentication of [name of the authentication list] connection, it allows access.  I was under the impression that I would not need to add this if RADIUS is configured as the default authentication method.

  Current config:

   aaa new-model ! ! aaa authentication login default group tacacs+ local aaa authentication login TACAL group tacacs+ local aaa authorization exec default group tacacs+ local aaa authorization commands 15 default group tacacs+ local aaa accounting commands 15 default start-stop group tacacs+ aaa session-id common 

   tacacs-server host [tacacs+ server IP] key 7 [password] tacacs-server directed-request

   ip http server ip http authentication aaa login-authentication TACAL ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag !

  It's been a while since I've done AAA on the part of a switch HTTP. However, looking at my notes I used only:

   ip http authentication aaa

  Basically, without specifying the method. Give that a try and let me know if it works. If it does not do a debugging on Ganymede authentications and after the output here.

  Thank you for evaluating useful messages!

• Password and the default SSH connection

  If I set up a Pix 6.2 running someone for you to connect via ssh, which is the password and login?

  default user name is pix

  There is no default password that you define to the command

  passwd yourpassword

  Try this document for more details

  http://www.CiscoPress.com/articles/article.asp?p=25342&seqNum=3&RL=1

  M.

  Hope that helps, rate, if