SSH version pix 6.3.3 is the name of user pix, you can connect to?

Similar Questions

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• When a second (another) user tries to connect using the connection to distance that a message "select a user to disconnect so you can connect.

  Original title: Remote Desktop

  We have Windows Server 2012 essentials (evaluation version) installed and working.  When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect.  The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first.  We need at least 3 to 4 remote desktop both users to be connected.  Please advice

  Hi BHARATISRANI,

  Thanks for posting in the Microsoft Community.

  Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Server 2012 Essentials General TechNet Forums

• Uninstalling Silverlight gives "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I can't remove Silverlight.

  I want to update to Silverlight. When I try to download, the download fails and I get a message to uninstall the old version.  When I try to do, I get a message that says "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I have been in this situation and tried the solution here:

  "How to manually clean a broken Silverlight installation.

  Who has not completely worked for me, however, if I pulled upward from Regedit
  (Start-> Run-> 'Regedit')
  and searched the whole registry "Silverlight", deleting keys of parenthood which contain this string. (There was a large number of them).  When I did, I was finally able to reinstall Silverlight.

  Note that editing the registry is dangerous, so make sure that you first create a backup of the registry and know how to restore it in case things go very wrong.
  "How do back up and restore the registry in Windows XP"
    <>http://support.Microsoft.com/kb/322756 >

  HTH,
  JW

• Problem uninstalling the program "installation source for this product is not available. Verify that the source exists and that you can access.

  OK, Windows Vista. Try to uninstall unused programs, (SimsLife) and met with the message: "the installation source for this product is not available.  Verify that the source exists and that you can access.  I'm trying to UNINSTALL a product that exists. How to find the source in order to uninstall the program?

  Hello

  Sometimes when you uninstall programs it may be other applications of the dependent files.  Some programs will leave them behind and others will take all during the uninstallation.

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  Download the free version of CCleaner and use the uninstaller to uninstall the application

  http://www.Piriform.com/ccleaner/download

• Cannot install iTunes. Get the error, "this installation package cannot be opened. Verify that the package exists and that you can access.

  I can't download itunes on my computer its gives me an error saying "this installation package cannot be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" can anyone help

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
  http://support.Apple.com/kb/ht1925

  Hello questions, see if that helps: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Turn on Windows 7 'Compatibility Mode' to iTunes:
  http://www.PCWorld.com/article/188534/turn_off_windows_7_compatibility_mode_for_itunes.html

  Windows reports that iTunesSetup.exe is not a valid Win32 program
  http://support.Apple.com/kb/TS1406

  First of all check if you have a version of 32 or 64-bit Windows:
  1) click the Start button, right-click computer and then click Properties.
  (2) in the system, see the system type - it will say either 32 or 64 bits.
  (3) download the appropriate version using the links.

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  Make sure that the "Windows Installer" service is running, or force start to begin.

  (1) open run, and type services.msc, and then press ENTER. You can also go
  Control Panel/Admin Tools/Services.

  (2) locate the Windows Installer in the list of installed services.

  (3) check that the status is "started".
  If the condition column is empty, right-click Windows Installer, and then select start.

  (4) If you get the error trying to force start the Windows Installer service,
  and then change the Startup Type to automatic (the default value is 'Manual').
  and then restart the computer.

  (5) very Installation Service runs after you restart the system.

  Also:
  Forum of Apple's Itunes: you can find a solution (if none of the above is of no help) to your problem when you post on their forum.

  http://discussions.Apple.com/category.jspa?categoryID=150

  J W Stuart: http://www.pagestart.com

• I forgot the name of user and password and my email has been deleted! Help!

  Hello! I have a Skype account with an email, I used to have (it's been deleted) and I can not find the user name and password. Skype account is still active by the way, I just can't log in cause I don't have the name of user and password. Is there any other way (except mail) to discover the password/user name?

  Whitout access to registered e-mail, I guess calling the service the customer is your only option, however, if you don't remember the user name or any other information that you can link to the account, retrieve the account may be difficult. If you already use Skype, a computer, you have access to, the %appdata%\skype folder contains a folder with the same name as your username (and all the others who have used the same computer logged in as that user).

  https://support.Skype.com/en/FAQ/FA1170/how-can-i-contact-Skype-customer-service?FromPage=search&fro...

• Get the error message "Windows must be enabled before you can connect. You want to activate now.

  Original title: impossible to activate Windows XP

  I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

  Hi Dale,

  Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Perform the steps mentioned below and see if it helps.
  a: turn on your PC
  b: Press F8 repeatedly , then in Mode safe
  c: Logon as per normal
  (Note: administrator password is usually empty, but I hope you know your password)
  d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)
  e: Click Start - run
  f: type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
  g: Wait a few seconds (although you won't see any change)
  h : Restart your PC normally (start - stop - restart - Ok)
  i: You will be able to return to the Normal Mode.

  Good day!

  Answer please if you have any questions.

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Change the names of user account on an old Dell laptop

  Original title: USER PROFILE

  I JUST BOUGHT A SECOND HAND DELL INSPIRON 1300, I WANT TO CHANGE THE NAME OF THE USER PROFILE. IN THE PANEL OF CONTROL SYSTEMS AND ADVANCED THERE IS ANOTHER CHANGE OF NAME ALONG THE COAST MINE CAN YOU THIS XP TO HELP THANK YOU

  You can change usernames, but you cannot change the profile names.

  If you want a new profile name, the best method is to create a new user with the desired name.  After that, you can copy the data to another profile to the new user name or simply delete the other profiles.  If you want to copy the data, simply pretend that the existing account is corrupt and follow the steps in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  You can delete the old user profiles by removing the users in Control Panel users or go to:
  Right click on "My Computer"-> properties-> Advanced (tab)-> settings (in the user profile section)

  HTH,
  JW

• How to change the name of user profile

  Original title: change of name to issue... help

  On my computer, my user profile will appear like this: THEDIAMONDMINE\Mrs Campbell Ali, how can I change the part of Ms. Campbell Ali?

  Hello

  
  This is an administrator account?
  You cannot change the name of the user profile to the location of the file. But instead of this, you can create a new user account and then transfer data from user profile (Ali Campbell of THEDIAMONDMINE\Mrs) for the new account and can set the new user profile name. You can see the following link.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  To copy data from user profile for the user account, you can see the following link.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
  See the section: to copy files to the new user profile
  It will be useful.

• Uninstalling Java problem: "the installation source for this product is not available. Make sure the source exsists and that you can access. »

  Hi, I'm having a little trouble trying to uninstall Java, so I can reinstall it. I get this error message:

  "The installation source for this product is not available. Make sure the source exsists and that you can access. "When I try to find the installation package to uninstall. I'm the only person on my laptop Windows Vista Ultimate, and I am the administrator on the computer. I can't find something when I search for it during the uninstallation. When I go on ' computer > disc Local (c) > Progam Files > Java' I see a whole bunch of files, but I can't find the installation package with the 'Installation .msi package' at the end. I find 'install.rdf '.

  I was wondering if anyone can help find me the source for Java, so I can uninstall and reinstall so my Java work properly.

  Java has been uninstalled before when Elluminate program my brother (online meetings of his school) and I guess when he was relocated something went wrong, but I have 2 Java programs. One by one by Sun Microsystems Inc. and Oracle and I am trying to install are Sun Microsystems Inc..

  Help, please!

  Corky (Corkster)

  Java issues are best handled by people in the Java forum:

  http://Java.com/en/download/help/index_installing.XML?user_os=Vista

  http://Java.com/en/download/help/index.XML For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Trying to backup computer, get the error message "the C: drive has errors" "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. »

  I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :).  Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. "  and then nothing happened.  What should I do?  How can I save my files?

  I planned it, rebooted, and nothing happened.  I have tried three times now

  Hey Ruffscicle

  read the information on how to run the check disk at the link below vista64.com

  If the first method does not work, try the other methods

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  have a Happy New Year

  Walter, the time zone traveller

• "This installation package could not be opened. Verify that the package exists and that you can access... »

  I've recently updated for windows vista and 7.  I had the same problem with the two operating systems.  Whenever I try to install some programs, I get a message that says...
  "This installation package could not be opened.  "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.

  I tried to manually update the windows installer, but I can't seem to find a way to fix this one.  Currently im running windows 7 64 bit if that helps.

  Thank you
  ' Stryffe

  For anyone who has problems with this. First ive tried not your guy fixing it was confusing and a lil difficult to follow. I have windows vista 64-bit. and Ive tried all kinds of solutions. Ive found that that some of you will like and other custom. OK, here it is:

  You must create a new user! You can download almost anything and it will be displayed on your previous user name! its as simple as that!
  Here's a video showing you how if you do not know: http://www.youtube.com/watch?v=s09COXeVRGo

• This installation could not be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.

  Windows 7 error message when install Java or Itunes 'this facility not could be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.

  I have a new machine and some programs I download it stops me in my tracks. It only allows me to install updates of Java or I Tunes?
  Help

  Rather than run the program from its current location, make sure that first save you it to your hard drive and then run Setup from there.