StageAspectRatio 3.4 AIR / AutoOrients problem on Ipad

Similar Questions

• I could find Air play in my iPad serial number F7 * P84. Model number is A1432

  MY model number of iPad A1432 with serial number F7 * P84.

  I couldn't find Air play in my iPad

  < personal information under the direction of the host >

  AirPlay are in Control Center (wide upward from the bottom of the screen). But don't appear when the iPad is close to a receiver Airplay as an Apple Tv.

  

  You are near an Airplay compatible receiver?  Connected to the same Wifi network as the Airplay receiver?

  Please do not post your serial number on a public forum. The model number is sufficient.

• Performance wise, it is sensible to switch to iPad Air starting from an iPad 3?

  Hello world

  I'm looking for a replacement for the iPad 3 (Wifi, 32GB) that my family uses for simple tasks (surfing, netflix, e-mail).

  I thought an Air 32 GB Wifi iPad, which should be much faster. But now, I saw that this model has only 1 GB of RAM, just like the iPad 3.

  Do you still think the air is considerably faster than the 3? The 3 is really slow behavin now with iOS 9 and not so much fun to use anymore.

  It would be good to hear your experiences.

  best,

  GEB

  The first generation iPad Air has a faster, more powerful CPU A7.

  The GPU more powerful and faster, too, that the iPad 3.

  It is also lighter.

  Those really has the only differences in the important features from the iPad 3.

• WiFi problem with iPad 4 on first generation Airport Express

  Bad problem with iPad 4 / iOS9. It seems that it is connected to the wifi (my old airport express of first-generation lists my iPad as a connected device and in settings of the iPad, the connection has the usual blue tick). BUT Internet works only for a few seconds after a reboot (hard) and there is no icon of wifi signal on the status bar (to keep for the first few seconds after the eboot). All other devices (iPhone 6 on ios8.2, iPad 2, two Macs and a PC) work fine on the airport express (first generation). Stranger still, when I go into a public café with wifi on the road, the iPad 4 connects no problem at the station, on the status bar and the internet works, I see the usual wifi antenna icon. Final oddity, it suddenly stopped working and no software / firmware updates between the two. As mentioned, soft and hard that it recharges don't help in saving a few seconds DNS cannot be a problem because all other devices work correctly.  I also tried to reset the network settings. It is esoteric.

  As a test, temporarily change the wireless network name and password on the AirPort Express.

  Make the name of... well very simple wireless network, no special characters (like an apostrophe) and no space empty. Ditto for the password.

  Can the iPad4 connect that way?

• problem with ipad do not resize Web site

  I'm having a problem with a site on the ipad. When you view the site on the ipad, some pages are correctly resolved, but others are too large for the screen. I have no idea what is the cause.

  For example, this page will scale correctly on the ipad:

  http://dev.bluemuledesign.com/products/attachment-point-weld-on-type.php

  considering that, it does not work:

  http://dev.bluemuledesign.com/products/bolt-on-attachment-swivel.php

  The two pages are the same format. They have just connected different information. I tried clear the cache, history, etc., thinking that perhaps she, but it is not to scale properly. If anyone can help it would be greatly appreciated.

  Ok. I found the problem. the ipad & iphone generally operate by default with a website 980px. That's what I work with usually. However, for this site, I had to do wide 1225px to adapt the radial gradient behind the header. for this reason, it is has not been scaling correctly. So I used the following code in the head:

  That solved the problem on the ipad and the iphone. It still doesn't explain why some pages worked very well until I added this code, though.

• Problems on iPad after updating iOS 10, departure lack &amp; no ID of TOUCH!

  I use and iPad 2 and just put Air updated to iOS 10 a few moments ago. Two problems:

  (1) when I start my iPad, the screen displays the logo of apple for a good 3-4 minutes, then it goes to lock the screen massive lag!

  (2) my iPad does not recognize touch ID! I get an error indicating that Touch ID is not available on the iPad.

  On all the sleep button has slowed too since the update and the device shows a lot of lag. I have problems with the application of music on my iPhone after as the updat as it does not work.

  It's quite frustrating and if anyone can help me on my multiple problems that had to be great.

  Thank you.

  Hello, misbah.mk!

  Thank you for joining the communities Support from Apple! It seems that you are having problems with your iPad Air. I know how important it is that the iPad that air works correctly for you at any time. First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords to ready for the start of the iPad to the top.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Problem with iPad when I try to choose a photo from library using browseForImage

  Hi, this is my first post, and I hope you can help me with this problem... I'm using cameraUI.launch to open the camera app, and take a picture without problem, it works fine, but when I try to open the Gallery to the iPad using browseForImage this open a small window to select a rigth folder? but when I try to select any folder this cancel any operation and I can not download any image from my Gallery... Please help, Im works with FB 4.7, apache 4.14 and adobe Air 16.0.0.272 on iPhones and Android devices I have not this problem right on iPad.

  It's source code:

  protected function btnGallery_clickHandler(event:MouseEvent):void {}

  If (CameraRoll.supportsBrowseForImage)

  {

  If (Capabilities.manufacturer.IndexOf ("Android") > = 0)

  {

  loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, this.contentLoadedHandler);

  }

  cameraRoll = new CameraRoll();

  cameraRoll.addEventListener (MediaEvent.SELECT, imageSelected);

  cameraRoll.addEventListener (Event.CANCEL, browseCanceled); / * This function is activated whenever I try to select a folder to select a picture on the iPad * /.

  cameraRoll.addEventListener (ErrorEvent.ERROR, mediaError);

  cameraRoll.browseForImage ();

  }

  }

  Finally I find a solution, in fact adobe has solved the problem with the new beta 17 Air... you must download for flex developers and use this version on your project...

  Download Adobe AIR 17 Beta - Adobe Labs

• Ink stops working mid race on iPad 2 Air; Works great on iPad Air

  As the title says. I tried penultimate, sketches and line with the same results. I have gestures multitouch off as well as the disabled palm rejection and have the same problem.

  Here's a video demonstration:

  Adobe ink runs out of ink - YouTube

  It could be a problem of iOS 8.1, like the Air iPad I tried was still running iOS 7.

  EDIT: It would probably make more sense to have in the forum slide and inkjet instead of line - must - I delete this note and add one in the other forum? Y at - it someone who can move it?

  EDIT 2: someone has posted in this forum - go see this thread: ink works irregularly

  EDIT 3: replace the first video with best

  Post edited by: Jared Stevens

  This problem is related to the new technology to the iPad screen 2 air. We work in collaboration with Adonit on a fix for this issue and it will be resolved in a future update of line.

• Need help to solve problems on iPad Air2 after updating iOS 10

  Hey guys this is my second post in the forums of the iPad on the same issues - have not been able to sort them yet Dazs.

  (1) my iPad can't Touch ID even after the restoration of the aircraft there was "failure to put in place Touch ID error" and whenever I turn on the Tablet I get a notification that says: «cannot activate Touch ID on iPad»

  When I go to settings to set a new mark I simply get an NDR regardless of switching Touch ID access power (iTunes/App store + phone unlock) as support interviews suggest.

  2) there is a general delay in the camera, the on/standby button does not respond as it used to, and especially when I turn on the iPad must be 2min30secs to get switched on - I timed it actually! Before the update simply took 15 seconds, my old laptop powers on more quickly than my iPad now!

  I restored my iPad, and while all the other functions work with delay however, but these two big things are bugs me a lot. They are not resolved after the restore the device.

  How to solve these problems please help!

  Here is the error I get when I try to configure the contact ID.

  

  This is the error that I get whenever I turn on the unit.

  

  And iPad takes so long in power! Record the time more myself!

  

• Problem syncing iPad to Mac

  Hello

  I do not speak English, so I will ask my request for help in French hoping I could you get an answer. The hope is to live...

  A few days ago I tried to connect my iPad 4 generation updated system my slot Mac OSX El Capitan, updated system also.

  iPad icon briefly appeared on iTunes then missing person quickly. iTunes sent me the following message: "iTunes cannot read the contents of the Teiki iPad. Go to the preferences of the iPad Summary tab and click Restore pour restore the original of this iPad settings. »

  This is the first time I encounter this problem. I said that my iPad is not jailbroken I'm not adept at these techniques.

  If you can send me a tutorial pour out of this impasse that would make me service.

  Thank you in advance

  Kind regards

  4 iPad wifi + 3 G

  Hello

  I do not speak English...

  A few days ago, I tried to connect my system of generation 4 iPad update my Mac OSX El Capitan, the day on systems also.

  the icon of the iPad appeared briefly on iTunes and then quickly disappeared. iTunes sent me the following message: "iTunes cannot read the contents of the Teiki iPad go to the preferences of the iPad Summary tab and click on restore to restore the original settings for iPad."

  This is the first time I encounter this problem. I said that my iPad is not jailbroken, I'm not a fan of these techniques.

  If you can send me a tutorial out of this impasse that could help me.

  Thanks in advance

  Kind regards

  4 iPad WiFi + 3G

• Problems with iPad wifi

  I have an iPad 4. A month ago I started having problems to make music to flow the iHeart, weather radar pages to load, and sometimes, to any web page using my wifi. I have to either activate the VPN feature to use my wifi or data on my phone by Personal Hotspot. My router is a Netgear Nighthawk R8000. I have checked & updated installed and restarted the router. I don't have these problems on my iPhone and my MacBook Pro. In addition to a factory reset on my iPad, what can I do?

  Hello Gammy2013,

  Try try troubleshooting your iPad with these instructions If your iPad, iPhone or iPod touch connects to a Wi-Fi - Apple Support Network

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• Safari problems with iPad

  I can open Safari on my iPad, (model ME392B/A, version 9.3) but no links beyond all. My iPhone and Mac Book pro work perfectly. I don't know if it's a problem of the iPad or Safari. I tried to reset it completely using the two buttons to turn off then wait awhile before Relighting. Can you help me?

  Try to update to iOS 9.3.1 was released yesterday: download iOS 9.0 - 9.3.1 Information

  iOS 9.3.1

  Fixes an issue that caused the apps to be insensitive after tapping on links in Safari and other applications

• Update iOS 9.3 showed activate problems on iPad 2

  As I did the update to 9.3 on my iPad I meet activate problems... problems to enter my code to start the device

  Perhaps some explanation in the link in bold

  ===========

  Demo , March 27, 2016 13:48

  Many people have problems with the update to iOS 9.3 and the issues are now flooding the iOS support forums. I hope that through the consolidation of some of the available information, that will help some of you not to mention hundreds of new threads asking all on the same things.

  Please do not shoot the Messenger if you already know all this. I'm just trying to help by providing information to the community. These problems are well known, Apple has recognized them and were reportedly working on a fix that should be out soon.

  Here are a few articles site technology explaining the problems if any of you are interested in reading them. They are in no particular order other than what my most recent Google search turned up for me.

  n-tapping-links-in-Safari-and-other-apps/ http://9to5mac.com/2016/03/27/some-users-Reporting-iPhone-Crashes-on-iOS-9-3-whe

  http://www.Forbes.com/sites/amitchowdhry/2016/03/24/Apple-iOS-9-3-is-causing-SER worried-ipad-problems.

  http://arstechnica.com/Apple/2016/03/Apple-pulls-iOS-9-3-update-for-older-device s-follows-activation-problems.

  ch-causes-new-software-to-make-older-iPhones-and-ipads-unusable-a6954791.html http://www.Independent.co.uk/Life-style/gadgets-and-Tech/News/iOS-93-Update-glit

  http://www.MacRumors.com/2016/03/25/Apple-ios93-iPad-2-update-bugs-remain/

  This contains some suggestions that may actually help some of you.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

  Apple post these support articles a couple of days and they can help some of you as well

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  If anything suggested works for you right now, you have to just be patient (remember this thing "Please do not shoot the Messenger ' from above) and wait for that Apple releases update to the fixed software.

• the apple remote app installed on my air of 6s and iPad iPhone does not work to control the apple tv

  the apple remote app on my iPhone 6s and iPad Air, home sharing is enabled on all devices and the MBP, airplay works for mirroring via tv application, however, I have over the display of the remote app to control the apple tv, though the library, iI figure on my MBP

  Hello Pmilkes,

  Thank you for using communities Support from Apple!

  I understand that Remote on your iOS devices does not longer work to control your Apple TV. To begin troubleshooting this situation, I recommend you to read on the following article and through the implementation of the process to ensure that your network and devices are configured correctly.

  Set up remote for your iPhone, iPad or iPod touch - Apple Support

  See you soon!