Stand-alone flash player.

Hello!!

When I tried to open a SWF file, it is not open in a standalone flash player window. Instead, it opens a window of its properties with a program called "mediainfo.

This problem occurs even if I downloaded and installed the flash player.

Can someone here help me solve this problem?

Thanks in advance!

Atar.

atar11 wrote:

I downloaded and installed the flash player.

The standard Flash Player does not install the standalone player; Download http://www.adobe.com/support/flashplayer/downloads.html (projector).

Note that the download is the player, not an installer, so you have to make the association of file manually (as described in Xircal above).

Tags: Flash Player

Similar Questions

  • Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year; want a more recent version.

    Download the stand-alone Flash Player does not require a browser? I have ver 11.5 r502 I d/l the last year (February 11, 2013); want a more recent version.

    Cannot find a lot on the standalone viewer, except in the docs of Flash Builder, who says a .swf can specify to use. I can't find a download link.

    Thank you, Doug

    You can download the standalone player (projector) since https://www.adobe.com/support/flashplayer/downloads.html

    Note that the download is the player, not an installer, you will need to manually .swf file association.

  • 'Simulate download' option appearing only in the stand-alone Flash Player debugger

    I have a strange problem - today I seem to have completely lost the 'Simulate download' option in the menu display of the standalone Flash Player. When the problem started, I ran the last 11.5 TIME Installer Flash drive and then downloaded the latest version of the debugger, but still no dice. The stand-alone version, that I am running is called "flashplayer_11_sa_debug.exe" so it should work. Is there something special I need to do after loading a SWF file to get the ability to simulate the download? I thought that any standalone player debugger should give me the option of the simulate download once I loaded a SWF, but I tried older versions and they are also not showing this option for some reason any. :/

    FWIW, I use Flashdevelop and Flash CS5 Pro - I tried building/launch of my Flashdevelop project (which launches the debugger 11.x player) and directly from CS5 ide (which launches a debugger 10.x player), but neither has the simulation download option more. I also tried to launch another, older Flash project and I got the same results in the player.

    I can't imagine what is wrong, since this feature was yesterday in the drive and I don't have any major changes to my configuration of Flash Pro/Flashdevelop (AFAIK). Any help would be greatly appreciated, thank you!

    OK, I got it working again... I guess download simulation is only shown for me doing a release, not make a debug version. I don't understand, but I'm going with it! Thank you.

  • Run the application SWF file in the stand-alone Flash Player

    This question has been posted in response to the following article: http://help.Adobe.com/en_US/FlashBuilder/using/WSe4e4b720da9dedb5-4dd43be212e8f90c222-7ffb .html

    Agreed that it could be better. I don't know what your problem is right, but here are a few thoughts:

    * The doc should tell you how to view, create, manage and run the Control Panel, so he needs a "stage 0":

    Select 0) run > Run configurations in the menu bar

    Step 3 said currently "In one or both of the run and debug paths, click Browse" and it should probably say something like:

    Under "URL or path to launch," click the Browse button for the entrance a bin-debug in the path

    Other that that, I tried this and that worked OK for me.

    Hope this helps,

    Randy Nielsen

    And Manager of community content

    Adobe Systems Incorporated

  • Flash stand alone player .flv.

    Dear members:

    I recently downloaded files .flv from the Internet and tried to view them without success. I installed in my computer the suite CS3 premium that includes Flash CS3 so I was surprised that the videos would not play. Right-click on these files, I have the choice to open them using the Flash Player.app (1), which is selected as default and also (2) Adobe Flash CS3.app, (3) Flash MX 2004 and SAFlashPlayer (4). In fact, none of these apps plays videos. When I select the Flash Player.app and SAFlashPlayer application load and they appear the menu bar of Mac OS x, but nothing happens.

    Please forgive me if this is a basic question, but I was not able to locate a stand-alone version of Flash Player for download on the Adobe web site. One that I found seems to be one installed in browsers so that they can play Flash media.

    Where can I find and download the stand alone Flash Player?

    Thanks in advance for your help.

    Joseph Chamberlain

    Hello, fredingston.

    After that I placed my original message, I found a plug-in to QuickTime that allows playing Flash videos. The name is Perian and did a very good job. A practical solution for those with Macs.

    Thank you second post I was able to find and download the new Adobe Media Player and really liked. The interface is pretty cool and I think it has more features that I haven't had the chance to explore (it seems more than just a simple player).

    I noticed that in Adobe Media Player, the videos seem to play with a better quality, then this will certainly become my default player for Flash media in the future.

    Thanks again for your reply and useful responses to my questions.

    Best regards

    Joseph

  • Why some buttons are disabled when I run Flash Player?

    I am building a resource for my students that allows the entry of text in a text input field. When I try to type the answer a number of key is disabled. I tried to disable keyboard shortcuts in the Flash editor. I then tried to close the program, just empty in the stand alone Flash Player. The list of keys that do not work are given below.

    Keys that don't work are 5,6,8,9,0, P, J, K, B and X. I have not tested other alphanumeric characters.

    the version of Flash Player is version 9.


    I am using Adobe Flash 5 at home but save as version 4 for use at school. I'm under ActionScript 2.

    Concerning

    teacheRuss

    stir in your policy.

  • Windows Media Player ActiveX plays do not image, but the stand alone WMP application. Why?

    I use my Windows Media Player v11 with extra codec to play mp4 files (mp4 are not supported by default with WMP 11, so I had to install a codec). It works very well in the stand-alone application, but when I use the ActiveX control in the regulation, it does not use the codec and I get only sound... no picture. I thought that the ActiveX was merely an interface to the same application of base used by OR and the stand alone media player. And if it's the same kernel, it must use the same codec. What Miss me?

    I have a tip for you. If you download Quicktime 7 (QT), you can select the QT activex player (see picture). It plays mp4 and seems better. QT is free, so there shouldn't be any problem. Try and see if it make you good

  • How to launch the FLash Player to debug in FB beta 3?

    In the last beta of the Flash Debug Player was launched when I debugged my project. (Of course, only when I unchecked "Generate HTML wrapper file" in the Flex compiler settings).

    In Beta 3, these settings are ignored and the swf file is launched directly in my browser instead of being flat in the stand-alone Flash debug player.
    Is it possible to change this behavior? I'm working on a Mac with 10.5.1.
    Thank you
    KOB

    Hi Michel,.

    It was a deliberate change, but several people complained, so we changed the behavior of return to the original behavior. Unfortunately, in Beta 3 there is no way to change this.

  • need a flash stand alone player

    currently have version 7 installed that came with Flash MX problem is sometimes find is not at its height...

    essentially to put l want a more updated version of the standalone for l player can run files with newer as the stand alone player l versions currently use fails pretty badly when executing the files showing only half of their content.

    You can't get the standalone version except with Flash Professional. Believe me, I've tried for a few years. You MAY be able to download a trial version for 30 days, but I don't know if the stand-alone version works always after the trial is up, or if it will take off with Pro when uninstall you.

    https://creative.Adobe.com/products/Flash

  • Detection of Flash Player or plugin on stand-alone systems

    I was instructed to download and apply the latest flash player (to be in conformity with the operational guidelines for patch vunerabilities) to our stand-alone systems that are not connected to the internet.  These systems can be connected to the network because of contracts existing between our Organization and the contractor.  I was able to download the latest version of flash player/plugin for these stand-alone computers.  Our office is not interested to install Flash player for computers that do not already pre-installed flash, only those who have older versions that need to be patched.  My problem is what I've done the research implies solutions that require access to an internet/Web page to check if the Flash has been installed.  Is there another method to check if Flash Player or the plugin are on these computers without being connected to a network or the internet?  We are also prohibited to install any 3rd party software that is not approved for use in our Organization. Any suggstions will be appreciated.  All computers are 32-bit OS - Windows XP SP3 or Windows Server 2003

    You can download standalone installers from http://www.adobe.com/products/flashplayer/fp_distribution3.html

    Test if you have Flash Player installed - will do you that manually or with a script?

    FP is installed to

    • C:\WINDOWS\system32\Macromed\Flash (32-bit systems)
    • C:\Windows\syswow64\Macromed\Flash (64-bit systems)
  • I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

    I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

    Thank you

    Leroy

    Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

  • I bought lr 6 stand-alone disk and install it on my laptop. now I have a new iMac, but find that I can't install lr because it doesn't have a dvd player. How do we install?

    I bought lr 6 stand-alone disk and install it on my laptop. now I have a new iMac, but find that I can't install lr because it doesn't have a dvd player. How do we install?

    Hi Etienne, you can download Lightroom 6 for Mac here: https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html and activate it using the serial number supplied with the version that you purchased.

  • How can I watch and download videos like youtube flash videos if flash player can't stand not for mobile phones using the android version 4.0?

    My mobile android version is 4.1.2. At the present time, I can't watch and download videos from youtube. If flash player does not support any mobile by using the version of android more 4.0, how can I watch and download these flash videos?

    You can always download and install Flash for Android 4.0 which still works on android versions greater than 4.0, which is located on this site (http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html), which is the own adobe site. Look for the Flash for Android 4.0 and the latest version. Although it is not advisable to use an outdated version of flash as it is not secure.

  • AIR works in debug flash CS5, but does not stand-alone.

    I have an application that uses the following code to access an XML file.

    var file = File.desktopDirectory.resolvePath ("wbconfig.xml");

    var fileStream = new FileStream();

    fileStream.open (file, FileMode.READ);

    var configXML = new XML (fileStream.readUTFBytes (fileStream.bytesAvailable));

    fileStream.close ();

    read soldout setting

    trace ("XML =", configXML);

    If (configXML.soldoutEnable == 'ON')

    soEnabled = true;

    on the other

    soEnabled = false;

    It works fine in debug mode (ctrl + enter), once I created a stand-alone .exe (sht, alt + F12). The .exe file does not read the file. and does not define the soEnabled. Can someone help me out here?

    I am running CS5, AIR 2 on windows XP. Thank you.

    This forum is using the AIR, not any other type of AIR application. Looks like you have a different type of AIR application. I think you might want to try the regular AIR (probably listed under Flex) forum.

    Becky Williams

    -Sent from my Palm Pre

    August 7, 2010 10:48, farmerInCS5 <[email protected]> wrote:

    I have an application that uses the following code to access an XML file.

    var file = File.desktopDirectory.resolvePath ("wbconfig.xml");

    var fileStream = new FileStream();

    fileStream.open (file, FileMode.READ);

    var configXML = new XML (fileStream.readUTFBytes (fileStream.bytesAvailable));

    fileStream.close ();

    read soldout setting

    trace ("XML =", configXML);

    If (configXML.soldoutEnable == 'ON')

    soEnabled = true;

    on the other

    soEnabled = false;

    It works fine in debug mode (ctrl + enter), once I created a stand-alone .exe (sht, alt + F12). The .exe file does not read the file. and does not define the soEnabled. Can someone help me out here?

    I am running CS5, AIR 2 on windows XP. Thank you.

  • Stand-alone player full screen not working not not on Vista MS

    Hello!
    I made full-screen independent publish with AS2, Flash Player 9. Everything works fine on XP Ms. But MS Vista when you go full screen, all you can see is background color (all other content disappears).
    I tried 2 AS and AS 3, downloaded, newer flash drives etc.
    After some tests, I noticed that when I disable "hardware acceleration" in menu flash player it works fine on Vista too.
    Can someone help me?
    Meybe anyone knows how to disable hardware acceleration with Action Script?

    UPDATE:
    I downloaded the "flash_player_update6_flash9" package, uinstalled flash player, install the drive/copy files form package and it works fine now on Vista OS.


    Peter

    Hello!
    I made full-screen independent publish with AS2, Flash Player 9. Everything works fine on XP Ms. But MS Vista when you go full screen, all you can see is background color (all other content disappears).
    I tried 2 AS and AS 3, downloaded, newer flash drives etc.
    After some tests, I noticed that when I disable "hardware acceleration" in menu flash player it works fine on Vista too.
    Can someone help me?
    Meybe anyone knows how to disable hardware acceleration with Action Script?

    UPDATE:
    I downloaded the "flash_player_update6_flash9" package, uinstalled flash player, install the drive/copy files form package and it works fine now on Vista OS.

    Peter

Maybe you are looking for

  • Apple Watch Shake to alarm screen function

    This is a feature request. Imagine yourself in a metro/bus holding a bracelet with your Apple Watch on this wrist. Plus you have a bag or an umbrella in the other hand. Now, you have two options to find out what the time: let pass the strap, put down

  • Windows updates fail to configure

    original title: Windows updates My updates were install great so far and it is said that they have failed. Can not configure correctly and returns to changes. Help, please.

  • Windows7 starter wallpaper

    The logo of Microsoft in my wallpaper become bigger, after I tried to change my desktop wallpaper via Picasa, how to restore?

  • remove the tabs on wordpad

    Been for decades I typed anything.  But, now, I don't remember how to remove the tabs when you use wordpad.  It is a simple problem, but help!  I need to set and reset tabs in my new line of 'work at home' and I'm completely stumped!  It is 20 so 60

  • errow 16

    I just downloaded adobe acrobat dc thr and wrote that the number of errow is 16. I already tried to uninstall and reinstall. What should I do?