Stand-alone server installation

Similar Questions

• Infrastructure of network for a stand-alone server installation

  Hi all

  I intend to install a standalone server network infrastructure: -.

  Platform: Oracle Virtual Box

  OS: OEL 6 32-bit

  Version of the grid: Oracle_Grid_Infrastructure_11.2.0.1.0_32_Linux

  I was wondering if the grid Infrastructure 11.2.0.1 is not compatible with 6 OEL. Please advice.

  Because after the installation, when I run root.sh, I encounter error CRS-4124.

  I checked it on the MOS Doc-ID 1624661.1 , and it says to change the owner of perl on the grid instead of the oracle

  ls-l /u01/app/grid/product/11.2.0/grid/perl/bin/perl

  -rwx-. 1 oracle oinstall 1424555 21 July 2011 perl

  /U01/app/grid/product/11.2.0/grid/Perl/bin/perl grid chown

  -rwx-. 1 grid oinstall 1424555 21 July 2011 perl

  And I did it. But still the same error

  The idea is to have a test at home environment. Please notify.

  Best regards

  Sourav Bolduc

  Hello Clerck,

  You can consult the MOS certifications tab to check the compatibility of the versions of various products. To meet your current question "Oracle Real Application Clusters 11.2.0.1.0 is not certified on Linux x 86 Oracle Linux 6"

  Kind regards

  Vautrin - Oracle

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• Installing Oracle 11 GR 2 ASM in stand-alone server Linux

  Hello
  
  Everyone can share documents (or) steps for installing Oracle 11 g ASM 2 in Linux 5.7; Stand alone server.
  
  Thank you very much.
  
  Thank you
  A. Nagy

  Reference: http://askdba.org/weblog/2009/09/11gr2-database-installation-with-asm-on-oel5/

  Published by: rajeysh on November 2, 2011 00:23

• problem with making a stand-alone server windows 2008, I do not really understand the versions of the internet protocol

  I do a stand-alone server for windows 2008 and my question, what's the difference between an internet protocol version 6 (TCP/IPv6) and internet protocol version 4 (TCP/IPv4), thank you welcomes Dylan

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Win 7, stand-alone windows installer does not install the msu downloaded on my HD files.

  I have several MSU files that I downloaded on my computer.

  I click on them and the stand-alone windows installer goes into "searching for updates on this computer".

  2 hours later, still nothing.

  I know that people have problems with the update of win 7... Nothing works.

  So far is just sitting there looking for updates... He ran all night... Nothing... always to research.

  I can not find where Microsoft puts the installed update files... If the software distribution folder, which wiped out during one of my attempts to resolve this problem.

  windows update told me today there were new updates available, and then sit there for 6 hours trying to get them with no result...

  So if I can't even manually install MSU file, what can I do? Try to install the kb3102810 fix

  You can use internet explore and access the catalog M$ and bring the two,.

  That is to say a right click and run as administrator

  

  Then go to the catalog and the top search right for each update and allows them to basket

  http://catalog.update.Microsoft.com/v7/site/install.aspx

• Management Center of firepower of Cisco on the stand-alone server

  You can install a management center of firepower of Cisco on a stand-alone server and not a virtual machine?  Here is a guide for the virtual machine:

  http://www.Cisco.com/c/en/us/TD/docs/security/firepower/60/Quick_Start/m...

  but I couldn't find one for a stand-alone server. Or what I can use this procedure for a stand-alone server.

  Looks like the only option of will not not with a virtual machine is to get the device itself.

  Thank you

  To install on a server bare metal, you could first put ESXi (free version) on it and then run FMC as the virtual machine only on that. I've had clients do this and it works fine.

• stand-alone server from acs 2008 available software?

  I use acs 4.2 on a windows 2003 server sp2 in my current network. The network has been replaced and I'm a software/windows 2008 Server and build the application. I'm a bit confused as too the available software. The acs software only 5.4 I see is for the appliance and vmware. Is this software available for stand-alone servers is not end of life?  Or can I use acs 4.2 on the stand-alone server and update all the way to 5.4. I think they would have a base at one of the levels 5.x package... Any information would be appreciated

  Hello

  I would like to inform you about the following things:

  1 ACS 5.x cannot be installed on the server of widnows as ACS 4.x

  2 ACS 5.x cannot be installed on the vmware (Linux-based) or as a device.

  3 ACS 4.x is a box of windows-based and ACS 5.x is a device based on linux/VMware

  4. you can configure vmware or a device such as a stand alone ACS5.x box.

  5 ACS 4.2.1.15 is available up to now and is still not end of life.

  6. you can upgrade the ACS 4.2.0.124 to 4.2.1.15, however it is not compatible with windows 2008 r2 box.

  7. you is impossible to pass the ACS ACS 5.4 4.2, you can buy seprate for ACS 5.4 license and then you can migrate the database from 4.2 to 5.4

  Concerning

  Mohammed (useful rate of messages)

• Stand-alone server MOH

  Currently we have our server configuration MOH on sr7 CallManager 4.1 (3), which supports about 100 end users. Is it necessary to configure a Windows 2003 server for the Department of HEALTH? We have resorted to a fixed Audio Source, but are now create .wav (music w/advertising) files to use. We have two remote offices. (possible load sharing) Additional ideas on a stand-alone server would be very appreciated. Also, is there documentation for the establishment of a stand-alone server to the Department of HEALTH?

  It is co resident if ccm.exe runs with IPVMS, if CCM.exe is NOT running, but only IPVMS it is autonomous

  HTH

  Java

  If it helps, please note

• The network infrastructure for a stand-alone server or a Cluster Network Infrastructure?

  Hello

  I want to install a single instance database and I want to use ASM.

  My setup is now just one node but in the future probably it evolve on several nodes.

  So, can I use the Network Infrastructure for a Cluster to a single node, or I have to use a stand-alone server network infrastructure?

  Concerning

  If you later plan ro use more than one server to install the cluster network infrastructure. It is possible to install on a server.

• Discover the definition could not be found on the stand-alone server

  Hi all.

  I'm working on jdev 11.1.1.5

  I created the new module in the application, it works very well in integrated weblogic. But when I am deploying, it is not wrking. When I click on the page, I get the definition of reportinResultVo not found error...

  Why it is happening.any suggeston

  Hello

  I also met this thing. But I'm sure, in my case when I create VO, I type the name of the VO. After the creation of the VO, I just rename. Somehow, rename any process is not successful. On the side of jdeveloper, I saw the name.but updated when I checked on the file system, it's always the old name. And that's why the stand-alone server does not receive the view definition. I've created VO again or try to rename according to you.its works for me.check names in your jdev and file system...

• VM Converter Standalone can convert a vm running on a standalone ESX 2.5.5 server directly to a stand-alone server ESX 4.1?

  Based on documents - VMConverter http://www.VMware.com/PDF/convsa_43_guide.PDF

  Destinations and source pages 22-26 - supported

  VM Converter Standalone 4.3 v can convert a vm running on a standalone ESX 2.5.5 server directly to a stand-alone server ESX 4.1? It appears that it can in the guide. Is this correct?

  VM Converter Standalone cannot convert a power off vm on an ESX 2.5.5 standalone server directly to the ESX Server 4.1 by guide unless the 2.5.5 ESX Server is managed by vCenter 2.5. Is this correct?

  Please confirm. There is some contention about this topic with their peers.

  All points will be awarded.

  Thank you.

  According to the documentation you can hot covert one ESX 2.5.X, if you manage the ESX with Virtual Center 2.5 or higher server.

• Migration VI - 3.5 (stand-alone server) to the field (W2K3)!

  Hi all

  We have a VI - 3.5 running on a stand-alone server environment

  (WORKING GROUP). The management have decided that it is a security risk

  and want us to add this server to our Domian W2K8.

  Now I am looking for 2 days now, but the only information I get "migration to new domain ESX environment.

  (1) but I need to know if there is a security risk.

  (2) how I do, where should I start?

  Vsphere host is actually not to join the domain. (Linux)

  You have to rename the DNS settings and specify the domain name and the FULL domain name

  In DNS, you must manually add the host ESX "A record" for the name and IP reslution.

  For security on the host computer, make sure you've got a strong login password

  On the side of the virtual machine as reference is similar to the addition of normal Windows servers in the domain, so security will depend on domain and security strategies

  Concerning

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate. Thank you.

• CUCMBE 6000 connection install the unit on the stand-alone server

  I have a new C200 M2. My question is, can I I separated the connection of the unit installed on a separate server, rather than having CUCMBE\Unity connection on 1? The C200 running vmware 4.1

  Thanks in advance

  A deployment to a deployment of 6K to

  (A) to run on the C series

  (B) choose maximum 4 apps in the link

  (C) use the EGGS for 6 K deployments that are smaller that installs stand-alone.

  If you want redundancy, you can have another running the OVAs 6 K of C series (if the product supports clustering)

  What I don't understand is what you said:

  CUCMBE\Unity connection on 1.

  On a 6K installation you select 4 products, in this case, you create a virtual machine for CUCM, one for CUC and one for CUPS. Separate virtual machines, separate installs and integrations.

  There is no CUCMBE on 6K like the one on 8.X where a single installation had CUCM and CUC, it's CUCMBE 5 K and it is a completely different matter.

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• Oracle Grid Infrastructure for a stand-alone server - licensing

  Is a separate license required for the Oracle Network Infrastructure when you use Oracle Grid Infrastructure for a stand-alone Servicer?  I compare it to non-GI installation where the database using cooked file systems for storage, and so only the database is allowed.

  Env:

  
  

  • Oracle 11 g grid infrastructure
  • Standalone database: Oracle 11.2.0.4 64-bit Enterprise Edition
  • Windows Server 2008 Standard

  Thanks for the advice / references.

  Tony

  As other posters have suggested, better check with Oracle.

  There is a good reference here in the docs of Oracle Online license, https://docs.oracle.com/cd/E18248_01/doc/license.112/e10594.pdf

  in respect of infrastructure of grid / search "components of Oracle Grid Infrastructure.

  It would be useful to check around popularity of ASM / GI on windows. I worked between some flavors of * nix & Windows, ASM is great, but not a huge number of Windows installs that I have come across seem to use it. I'd certainly * nix however if (even if not!) considering the DSO. Sit together much cleaner