The network infrastructure for a stand-alone server or a Cluster Network Infrastructure?
Hello
I want to install a single instance database and I want to use ASM.
My setup is now just one node but in the future probably it evolve on several nodes.
So, can I use the Network Infrastructure for a Cluster to a single node, or I have to use a stand-alone server network infrastructure?
Concerning
If you later plan ro use more than one server to install the cluster network infrastructure. It is possible to install on a server.
Tags: Database
Similar Questions
-
I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7
It's my environment:
VM VirtualBox
OS: Linux to Oracle 7
RAM: 2G
CPU: 1 outlet | 2 carrots
OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.
Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure
Installation type: SServer tandalone.
The installation user: uid = 501 (oracle)
installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.
Put ASM implementation with Linux e/s Standard (No. ASMLib).
The virtual machine has 3 disks attached.
Features: / dev/sdb, / dev/sdc, / dev/sdd
I ran to related records:
# / bin / / dev/raw/raw1 gross/dev/sdb1
# / bin / / dev/raw/raw2 gross/dev/sdc1
# / bin / / dev/raw/raw3 gross/dev/sdd1
# raw - qa
/ dev/RAW/raw1: linked main 8, minor 17
/ dev/RAW/raw2: linked main 8, minor 33
/ dev/RAW/raw3: linked main 8, minor 49
Also, I have configured the following command to set permanent configuration:
#vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules
ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".
ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".
ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".
# set permissions on these discs for the owner of the Oracle user.
ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "
NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.
BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb
BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1
BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc
BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1
BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd
BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1
This happens whenever I restart the server.
But authorities are good when I run # ls - lrt/dev/raw/raw *.
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3
Problem: when running script $GRID_HOME/root.sh.
Adding Clusterware entries to inittab
ohasd could not start
Cannot start the Clusterware. Last 20 lines of the trace log alert:
2015 08-19 02:15:24.442:
[client (7260)] CRS-2101: the RSC has been formatted using version 3.
2015 08-19 02:15:28.238:
[client (7283)] CRS-1001: the OCR has been formatted using version 3.
ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4
failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install
Please help me.
Geraldo Peralta
Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931
Under the Options deprecated for Oracle RAC 11 g Release 2:
"Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »
Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/
HTH,
Brian -
Oracle Grid Infrastructure for a stand-alone server - licensing
Is a separate license required for the Oracle Network Infrastructure when you use Oracle Grid Infrastructure for a stand-alone Servicer? I compare it to non-GI installation where the database using cooked file systems for storage, and so only the database is allowed.
Env:
- Oracle 11 g grid infrastructure
- Standalone database: Oracle 11.2.0.4 64-bit Enterprise Edition
- Windows Server 2008 Standard
Thanks for the advice / references.
Tony
As other posters have suggested, better check with Oracle.
There is a good reference here in the docs of Oracle Online license, https://docs.oracle.com/cd/E18248_01/doc/license.112/e10594.pdf
in respect of infrastructure of grid / search "components of Oracle Grid Infrastructure.
It would be useful to check around popularity of ASM / GI on windows. I worked between some flavors of * nix & Windows, ASM is great, but not a huge number of Windows installs that I have come across seem to use it. I'd certainly * nix however if (even if not!) considering the DSO. Sit together much cleaner
-
Infrastructure of network for a stand-alone server installation
Hi all
I intend to install a standalone server network infrastructure: -.
Platform: Oracle Virtual Box
OS: OEL 6 32-bit
Version of the grid: Oracle_Grid_Infrastructure_11.2.0.1.0_32_Linux
I was wondering if the grid Infrastructure 11.2.0.1 is not compatible with 6 OEL. Please advice.
Because after the installation, when I run root.sh, I encounter error CRS-4124.
I checked it on the MOS Doc-ID 1624661.1 , and it says to change the owner of perl on the grid instead of the oracle
ls-l /u01/app/grid/product/11.2.0/grid/perl/bin/perl
-rwx-. 1 oracle oinstall 1424555 21 July 2011 perl
/U01/app/grid/product/11.2.0/grid/Perl/bin/perl grid chown
-rwx-. 1 grid oinstall 1424555 21 July 2011 perl
And I did it. But still the same error
The idea is to have a test at home environment. Please notify.
Best regards
Sourav Bolduc
Hello Clerck,
You can consult the MOS certifications tab to check the compatibility of the versions of various products. To meet your current question "Oracle Real Application Clusters 11.2.0.1.0 is not certified on Linux x 86 Oracle Linux 6"
Kind regards
Vautrin - Oracle
-
GI for a stand-alone inside the secondary zone
Hello world.
I try to install IM in Solaris 11.1 secondary zone.
I perform software installation only:
...
Software installation successfully.
After I perform a GI for stand-alone root scripts:
root@db1:/tmp# /u01/app/11.2.0/grid/perl/bin/perl-I/u01/app/11.2.0/grid/perl/lib-I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl
The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Create the trace directory
User ignored the prerequisites during installation
LD.so.1:: ocrconfig.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type
LD.so.1:: clscfg.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type
LD.so.1:: clscfg.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type
Failure with signal control 9: /u01/app/11.2.0/grid/bin/clscfg-local g asmadmin
Creating OCR only local (local /u01/app/11.2.0/grid/bin/clscfg-asmadmin - g)... failed
The /u01/app/11.2.0/grid/lib/libclntsh.so.11.1 file are of size zero:
root@db1:/tmp# du-sh /u01/app/11.2.0/grid/lib/libclntsh.so.11.1
0K /u01/app/11.2.0/grid/lib/libclntsh.so.11.1
In the global zone, all right.
...
Software installation successfully.
Configuration of IM for standalone:
root@Exadata:/tmp# /u01/app/11.2.0/grid/perl/bin/perl-I/u01/app/11.2.0/grid/perl/lib-I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl
The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Create the trace directory
User ignored the prerequisites during installation
ADD LOCAL MODE
Creating OCR keys for the user "grid", privgrp 'oinstall '...
Successful operation.
LOCAL ONLY MODE
Successfully accumulated necessary OCR keys.
Creating OCR keys for the user "root", "root"... privgrp
Successful operation.
CRS-4664: node exadata pinned successfully.
Adding Clusterware entries to inittab
Exadata 2014/03/02 19:35:36 /u01/app/11.2.0/grid/cdata/exadata/backup_20140302_193536.olr
Grid infrastructure Oracle correctly configured for a stand-alone server
root@Exadata:/tmp# du-sh /u01/app/11.2.0/grid/lib/libclntsh.so.11.1
/U01/app/11.2.0/grid/lib/libclntsh.so.11.1 51 M
The installation directory is the same for the global zone and zub-zone (fs just loop back).
I can't copy valid libclntsh.so.11.1 in the secondary area before configuring, but what happens?
Hello
Solaris zones are not all packages from the global zone. A default area is an imprint of very thin bones were you add several packages.
That's what I've done for solaris:
pkg install/system/solaris-big-server group
pkg install xclock libxmuu x 11-info-clients compatibility/ucb
pkg install SUNWarc SUNWbtool SUNWhea SUNWlibC SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWcsl SUNWxcu4 pkg://solaris/SUNWxwplt
Great server to get a lot of useful tools
connection for Yes and ucb package is needed to patch it with opatch
third line are the requirements for solaris, as documented in the manual and where applicable under solaris 11
Concerning
Thomas
-
Management Center of firepower of Cisco on the stand-alone server
You can install a management center of firepower of Cisco on a stand-alone server and not a virtual machine? Here is a guide for the virtual machine:
http://www.Cisco.com/c/en/us/TD/docs/security/firepower/60/Quick_Start/m...
but I couldn't find one for a stand-alone server. Or what I can use this procedure for a stand-alone server.
Looks like the only option of will not not with a virtual machine is to get the device itself.
Thank you
To install on a server bare metal, you could first put ESXi (free version) on it and then run FMC as the virtual machine only on that. I've had clients do this and it works fine.
-
I do a stand-alone server for windows 2008 and my question, what's the difference between an internet protocol version 6 (TCP/IPv6) and internet protocol version 4 (TCP/IPv4), thank you welcomes Dylan
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Discover the definition could not be found on the stand-alone server
Hi all.
I'm working on jdev 11.1.1.5
I created the new module in the application, it works very well in integrated weblogic. But when I am deploying, it is not wrking. When I click on the page, I get the definition of reportinResultVo not found error...
Why it is happening.any suggeston
Hello
I also met this thing. But I'm sure, in my case when I create VO, I type the name of the VO. After the creation of the VO, I just rename. Somehow, rename any process is not successful. On the side of jdeveloper, I saw the name.but updated when I checked on the file system, it's always the old name. And that's why the stand-alone server does not receive the view definition. I've created VO again or try to rename according to you.its works for me.check names in your jdev and file system...
-
Migration VI - 3.5 (stand-alone server) to the field (W2K3)!
Hi all
We have a VI - 3.5 running on a stand-alone server environment
(WORKING GROUP). The management have decided that it is a security risk
and want us to add this server to our Domian W2K8.
Now I am looking for 2 days now, but the only information I get "
.(1) but I need to know if there is a security risk.
(2) how I do, where should I start?
Vsphere host is actually not to join the domain. (Linux)
You have to rename the DNS settings and specify the domain name and the FULL domain name
In DNS, you must manually add the host ESX "A record" for the name and IP reslution.
For security on the host computer, make sure you've got a strong login password
On the side of the virtual machine as reference is similar to the addition of normal Windows servers in the domain, so security will depend on domain and security strategies
Concerning
If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate. Thank you.
-
stand-alone server from acs 2008 available software?
I use acs 4.2 on a windows 2003 server sp2 in my current network. The network has been replaced and I'm a software/windows 2008 Server and build the application. I'm a bit confused as too the available software. The acs software only 5.4 I see is for the appliance and vmware. Is this software available for stand-alone servers is not end of life? Or can I use acs 4.2 on the stand-alone server and update all the way to 5.4. I think they would have a base at one of the levels 5.x package... Any information would be appreciated
Hello
I would like to inform you about the following things:
1 ACS 5.x cannot be installed on the server of widnows as ACS 4.x
2 ACS 5.x cannot be installed on the vmware (Linux-based) or as a device.
3 ACS 4.x is a box of windows-based and ACS 5.x is a device based on linux/VMware
4. you can configure vmware or a device such as a stand alone ACS5.x box.
5 ACS 4.2.1.15 is available up to now and is still not end of life.
6. you can upgrade the ACS 4.2.0.124 to 4.2.1.15, however it is not compatible with windows 2008 r2 box.
7. you is impossible to pass the ACS ACS 5.4 4.2, you can buy seprate for ACS 5.4 license and then you can migrate the database from 4.2 to 5.4
Concerning
Mohammed (useful rate of messages)
-
Stand-alone server installation
Never noticed THAT before.
Oracle 5, 64 - bit Linux.
If you install GI 11.2.0.1 (from V17531 - 01.zip) options are the following. Note "install and Configure Grid Infrastructure fo a stand-alone server.
But if installation 11.2.0.2 or later (for example, p10098816_112020_Linux - x 86 - 64_3of7.zip), the options are the following. Note that now the only thing for a standalone server is 'configure', not "install and configure".
It seems that if I want to build a new system with 11.2.0.2 (at 11.2.0.4), autonomous, no cluster, I must first install 11.2.0.1 then patch up, despite the fact that these patches are supposed to be "install complete".
Since Oracle Clusterware and Oracle ASM upgrades are always out of updates up to date.
With 11.2, we cannot perform an upgrade on existing homes instead of Oracle Clusterware and Oracle ASM.
I think it's only a "bug" where the word 'Install' is missing.
No matter if installing a new charge or upgrade, will be always new installation will then set up a new or move current config to the new House.
-
Currently we have our server configuration MOH on sr7 CallManager 4.1 (3), which supports about 100 end users. Is it necessary to configure a Windows 2003 server for the Department of HEALTH? We have resorted to a fixed Audio Source, but are now create .wav (music w/advertising) files to use. We have two remote offices. (possible load sharing) Additional ideas on a stand-alone server would be very appreciated. Also, is there documentation for the establishment of a stand-alone server to the Department of HEALTH?
It is co resident if ccm.exe runs with IPVMS, if CCM.exe is NOT running, but only IPVMS it is autonomous
HTH
Java
If it helps, please note
-
Based on documents - VMConverter http://www.VMware.com/PDF/convsa_43_guide.PDF
Destinations and source pages 22-26 - supported
VM Converter Standalone 4.3 v can convert a vm running on a standalone ESX 2.5.5 server directly to a stand-alone server ESX 4.1? It appears that it can in the guide. Is this correct?
VM Converter Standalone cannot convert a power off vm on an ESX 2.5.5 standalone server directly to the ESX Server 4.1 by guide unless the 2.5.5 ESX Server is managed by vCenter 2.5. Is this correct?
Please confirm. There is some contention about this topic with their peers.
All points will be awarded.
Thank you.
According to the documentation you can hot covert one ESX 2.5.X, if you manage the ESX with Virtual Center 2.5 or higher server.
-
Try to get the listener to the APEX to run in stand-alone mode
US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work. We decided to switch to Linux, and now we get questions below on the Linux (Red Hat). Any ideas?
Thank you!
Java $ [oracle@ban-apex-prod apex_listener]-Dapex.port=8070-Dapex.images=/home/orale/apex/images-jar apex.war
NEWS: Check out: /home/oracle/apex_listener/apex.war
See: ' java-jar apex.war - help' for a full range of configuration options
INFO: Extraction to: / tmp/apex
INFO: Using classpath: file:/tmp/apex/apex/___embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-1 1.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar: file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/ap ex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar : file:/tmp/apex/ap ex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:
INFO: From Embedded Web container: / tmp/apex
December 7, 2011 16:36:55 ___bootstrap. The Deployment Manager deploy
INFO: Deploy application path=/tmp/apex/apex/WEB-INF/web.xml
December 7, 2011 16:36:56 ___bootstrap. The Deployment Manager deploy
NEWS: deployment application path=/tmp/apex/apex/WEB-INF/web.xml
December 7, 2011 16:36:56 com.sun.grizzly.Controller logVersion
INFO: From Grizzly Framework 1.9.18 - o - Wed Dec 07 16:36:56 EAST 2011
INFO: http://localhost:8070 / apex began.
December 7, 2011 16:37:02 com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
java.lang.IllegalStateException: not yet initialized
at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:249)
at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(AdminManager.java:868)
at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java:841)
at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
at java.lang.Thread.run(Thread.java:679)
December 7, 2011 16:58:39 com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
oracle.dbtools.rt.service.ServiceLocatorException: there is no defined service
at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.java:91)
at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:74)
at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:85)
at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.java:138)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
at java.lang.Thread.run(Thread.java:679)Hello
US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work.
Now, it's a coincidence - Colm just posted on this topic today: {: identifier of the thread = 2318817}
It is in any case, he started on Linux, so...SEVERE: service exception:
java.lang.IllegalStateException: not yet initializedThis is the relevant part of your stack trace. You must call http://
: 8070/apex/listenerConfigure and complete the initial configuration (mainly the database connection settings) before you can access the APEX for the first time. -Udo
-
Installing Oracle 11 GR 2 ASM in stand-alone server Linux
Hello
Everyone can share documents (or) steps for installing Oracle 11 g ASM 2 in Linux 5.7; Stand alone server.
Thank you very much.
Thank you
A. NagyReference: http://askdba.org/weblog/2009/09/11gr2-database-installation-with-asm-on-oel5/
Published by: rajeysh on November 2, 2011 00:23
Maybe you are looking for
-
HP hdx premium series: admiministrator or power on password
Hi wonder if anyone can help with locked computer I bought used, its a premium series of hp hdx and right when lights before accessing the drive hard request administrator password or power on password. the one that gave me does not work and after 3
-
I am trying to replace my product key OEM "generic" with "individual" product key on the label "Genuine Microsoft" at the back of my case.I'm preparing the machine for use by my mother - a neophyte computer - live too far away for me to provide pract
-
Why is it when I delete a message in windows mail removes ALL messages from the Inbox in Xfinity connect
-
Hello Recently, I still facing this problem of cannot delete files His screenshot http://ImageShack.us/photo/my-images/69/Cropt.jpg/
-
BSOD a few minutes after starting. And another after entering IE.
Wake up BSOD a few minutes after starting. Then I start and it's OK. Then when I go into IE I get a new one. Then, everything is OK for a long time (often for the rest of the day). Trouble started when I downloaded Firefox, while IE was found to