Standard user account with no parameters

Similar Questions

• How to transfer files & settings from the administrator account for the Standard user account

  I have a Standard user account. I use the administrator account and realized that was not a right thing to do. However, now I can't have one of the images or files. I thought that they would automatically be there, but it didn't work that way. Is it possible to transfer these items? Open to all suggestions. Thank you

  Hi JonnieStark,
  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-to-transfer-files-from-one-user-account-to/e262acd6-08f2-4a77-9CFB-1b670dd6706d

  I hope this helps!

• How to run a program as an administrator on a standard user account without be prompted for the password

  I have this software that doesn't work correctly than if you run it as administrator.  When you run it as administrator on the standard user account, it asks you the password.  How you turn off the prompt for password for that one software only? Or how you also run a software Administrator without being prompted to enter a password?

  Thanks for your help.

  Matt,

  Since you don't have a Vista Home Premium, I found another article that describes a way to get around it to make a registry change.

  The following Web site:
  http://www.eCoustics.com/PCW/HOWTO/140134

  Vista Home Premium is not the Group Policy Editor. To make the changes in this version, you must change the registry. Before making any changes to the registry, back it up following the instructions in "block Cookies for spying, but keep the most useful" (scroll down to the area of blue text at the bottom of the page).

  With your backup of the registry in place, click Start, type regedit and press ENTER. In the tree on the left pane, navigate to Microsoft\Windows\CurrentVersion\Policies\System HKEY_LOCAL_MACHINE. With the icon system selected in the left pane, double-click on ConsentPromptBehaviorAdmin in the right pane. Change the data value to 0, then click on OK. You should see the effect immediately (no restart required).

  Not sure if this will help, but thought that I have it send your way.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems in standard user accounts user access control

  Equipped with Vista. Accounts of users within the standard, I can not install any new software. When you are prompted by user account control, my admin password, enter the password and get a response saying the account name or password are incorrect. The password allows me to connect and install the software on the admin account, but why now is no longer get in a standard user account. ?   Any ideas?

  Hello

  Step 1:

  You can try disabling the UAC on the standard account to see if the software will be installed.

  Enable or disable the User Account Control

  Note: Enable UAC, once the problem is resolved.

  Check and make sure that the standard account you are allowed to install.

  Step 2:

  If the problem persists, then you can create a new user account and then try to install the software.

  Create a user account

  Hope this information is useful.

• standard user account

  When I was on assistance remotely with dell they set up this account on my computer ASP.NET Machine standard user account, password protected.        I've never used, can't even get to work, it does not appear on the change username on the start menu. What is it and is it dangerous, how does it work?  Please help thanks

  I probably couldn't get online, that's why I called dell, Yes, in India, I read the post, I don't understand all that, I'm a rookie. can you expain in English for me please, and what do I do?

  As Cyber_Defend_Team said, just leave it alone.
  IF your computer is working ok, just forget about it. If not, post your particular problem.

  t-4-2

• Cannot add blank screen Standard user accounts

  Hello.  I recently added a Standard user in Vista Business.  When I logged in this account, he said it was "Preparing Desktop" for a few minutes then indicates that she has been put in place personal settings in Microsoft Windows Mail 7 and produces an error message saying "Windows mail could not be started because MSOE." DLL cannot be initialized. "Note that I don't even use Windows Mail.  I clicked ok and it sat for a few minutes and then gave me a blank screen.  Now if I connect to this user account, it just goes straight to a white screen.  If I change the rights of a Director, it works fine.  Back to a standard user, and I get a blank screen.  I hit CTRL + ALT + DELETE to the blank screen and run explorer.exe but that does nothing.  I started in safe mode and it does not work.  I ran make System File Checker (SFC) and it found no errors.  I restored back a few weeks, but that has not helped.  This can be a problem for a long time that I have never tried to add another user before.  I have the same problem if I turn on the guest as a standard user account.  Admin account all the works and any standard account does not work.  I searched the forums and cannot find a solution for this problem.

  I'd appreciate really a few ideas on how to solve this problem.
  Thank you

  Hello

  I suggest you try the following steps to refine the question:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: Check with another standard user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

   

  Step 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Standard user account & installation problem (Win7)

  Hello

  Unfortunately, I came across a problem which I think is due to administrative privleges, or lack thereof.

  Currently I am able to connect and print to my printer a HP Officejet 6600, but I am unable to use the scan function.

  On the printer after selection "Scan" and then "computer" it displays "No registered computer" and on my laptop after start-> all programs-> HP-> HP Officejet 6600-> HP Scan I get the error message "HP Officejet 6600." not found

  I ran the "HP print and scan" utility of diagnosis and he told me that I needed to install the software package full of features to use the scan function.

  My problem is the standard user account that I can't install the software.

  I am however able to solve this problem in the administrator account. Can I install the full package of features or even using the Installation Wizard of the software to install & to add/install a new printer (wireless).

  So, here's my question:
  Does anyone know what local security policy or group policy I have to modify to allow users Standard fix this in their account?

  I tried this solution and it doesn't work:

  www.windowsnetworking.com/kbase/WindowsTips/Windows7/AdminTips/Miscellaneous/Allownon-adminstoinstal...

  Thank you for your time and help,

  Alek

  * System plug (if this is important)

  Dell Latitude D630
  Win 7 Pro x 86

  Is Q: there anyway to give some sort of administrative rights with regard to the installation of printers on standard user accounts?

  A: your only choices are the two that I mentioned above.  Disable the standard/UAC user account or run as administrator installation files.  If those who do not work, then check with MS to see what you need to do to get these working wrapper running as it should.

  Q: but to my knowledge, this command deletes all the benefits of the daily duties with a standard account of operation?

  R: you got it.  This is the world of the Administration Windows for you.

  Q: How can I get a standard user account to perform the installation from the CD from HP?

  A: same as mentioned above.

  To my knowledge, anytthing would also require a 3rd party application to serve as a local application broker.  The broker assented request to install and can be configured to evevate some applications/processes to run as administrator by providing credentials of the administrator to the BONE.  For example, we are currently investigating a product called Power Broker to accomplish this task for us on the Win 8 + OS.

  Theres no doubt, the accounts of users of STDS are a pain in the thigh for admins.  Everyone needs to find a way to manage the rights that they give to their users.  HP cannot help you until find you the part of MS. user rights

• How can I give some privileges to a standard user account that they can access some programs without being stopped for the admin password?

  I have two accounts on my Windows Vista computer:
   
  (1.) an account admin and one
  (2.) a standard user account.

  I would like to give to the standard user account privileges, so they can access programs like spybot, without needing an admin password (he asked generally the password update spybot).

  I have read the menu permissions by right-clicking the spybot .exe file, click the securities tab and the Advanced button.
  I tried to give full control to the standard user, but still maintains he ask for an admin password.

  is there someone who can provide assistance so that certain programs accessible by standard account, but others not?

  Any help is appreciated,
  Thank you.

  Hi Hardik Mehta,

  Try the steps next to the applications you want to only allow or shortcut to run with administrator privileges

  1. navigate to the location of the .exe file programs and right click on the file .exe or right click on the shortcut to launch the program.

  2. Select Properties.

  3. click on the Advanced button.

  4. check run as administrator in the advanced properties box.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The admin user doesn't have access to the Standard user account files

  OK, I'm lost.  It's crazy.

  After reading the reasons to do most of your work on/as a Standard user, I created a user account (quite a while) and have been using it since--and perhaps the way I did have this problem.

  If I remember correctly, this is how I did it.  I had a LOT of files under my old ID admin, so I created another Admin account and then replaced by former Admin account is a Standard user account.  I have been connected and makes every slot the user account Standard since then, with Windows poping a request my Admin password whenever he needed.

  Today, I needed to change a tax return of 2013 - and when I reloaded TurboTax last year and needed to get the State program, TurboTax wouldn't, claiming that I need to be logged in as an Admin user (I have not the popup asking my Admin password).

  OK, here's the problem.  When I have users to switch to my Admin account, after the passage, almost all the icons on my desktop disappear AND there are only a couple of files in my files of Documents Libraries\Documents\My.

  Everything to go.  I thought as an Admin user, I had access to everything.  How can I get all this stuff back (the icons on the desktop for example and other user account files, etc.)

  When I was logged in as an Admin user, it seemed that I could share files with other Useers - so I thought, Aha, that's how it works.  So I logged on my Standard user account - but the ability to share my files, etc. did not exist, at least as far as I can tell (that is, cannot find this option anywhere).

  If all goes well there is something simple that miss me that things work so that as an Admin user, I have access to other user accounts where - it is supposed to work, isn't.

  Obviously need help.  Thank you.  Ron in round rock

  In fact, I have nothing - as stated in the above comment, I could see all my files and folders User\ron

  -> This either means that the folder is already shared, or that UAC (User Account Control) is disabled on your PC. This isn't a good idea because it exposes your computer at serious risk.

  I can edit, delete, running back, I can't (or maybe since I am the only user on this machine, I should leave him alone).  Just curious as to what I did exactly.

  -> If you have shared with read/write access, you can create/edit/delete the files.

  And finally, as an Admin user, I have only 4 icons in the taskbar (IE, Chrome, Windows Media Player and Windows Explorer) - that doesn't sound right.

  -> You'll get exactly icons you placed here while it is logged on as admin user.

  And really Finally, with regard to the disappearance of all the icons on my desktop when logged in as Admin user.

  Each user has his own profile. Inside the profile, there is the user's desktop. Desktop shortcuts that are visible while connected as user A are not visible when you are logged on as user B because each user has his own office!

  There is one exception: most applications require at installation time if their shortcuts must be visible by all users. If you answer 'Yes', then the shortcuts will go into this common folder: C:\Users\Public\Desktop.

• How to remove the Standard user account password

  I am the only person to use my computer, as recommended that I've set up an admin and the standard user account. The admin is password protected, the standard user does not have to be. I accidentally answered a guest orders and entered a password and want to remove it.  When I try to remove it, I get the message windows cannot remove the password.     How can I remove this password?  I must stress that it is Windows 7.

  I am the only person to use my computer, as recommended that I've set up an admin and the standard user account. The admin is password protected, the standard user does not have to be. I accidentally answered a guest orders and entered a password and want to remove it.  When I try to remove it, I get the message windows cannot remove the password.     How can I remove this password?  I must stress that it is Windows 7.

  You can't "delete" a password, but you can replace it with a white.

• Unable to connect to the internet from the Standard user account.

  Original title: query on standard user accounts

  I created a standard user account, but I can't connect to internet, my administrator account is correct, what do I do?

  Hi MaxQG,

  1. what happens when you try to access the Internet from the standard user account?

  2. you receive messages or error codes?

  3. have you ever connect to the Internet from the standard user account?

  You can check if there are parental controls together to prevent the user to access the Internet. You can see the bottom of the article for more information on this:

  What can I control with Parental controls?

  You can also create a new user profile and check if you are able to navigate new user account.

  Create a new user account

  If you are not faced with the same question in a new user account, you can check the link below and use the steps provided to screw a corrupted user profile
  Difficulty of a corrupted user profile

• Cannot return the 'Guest' to the standard user account Type

  I changed our Type of customer account to the administrator, so a family member could download some things when I was unavailable to repeatedly type a password for it.  Now, I would like to change the Type of account to standard - but I can't.

  When I connect like me, an administrator, and then click on manage other user accounts, the only changes I offer myself for the guest account are image change or disable the account.  When I log on as a guest and click on change the Type of account, I select the Standard button, click on change the account Type, and should not be.  I went back to the screen back and comments is still a Director.  What is happening with this limitation?

  Thank you

  Rosela

  Just disable the guest account.

  And will NEVER again allow him. It is a security risk because it allows anonymous access on your computer. Even worse, if you changed it administrator. (Why on EARTH made you that I have NO idea). This is why it is disabled by default.

  If you wish to allow someone occasional access to your machine to create a Standard user account and call it 'visitor' or something similar. You don't need administrator privileges to upload files...

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Windows Blog

• standard user account changed and I can't change it back to Admin

  Greetins
  I have a slight problem
  my sisters machine
  running Windows 7
  I've been using it and try to understand
  why it is not up-to-date
  I changed the standard user account
  and now, he will not return to admin
  She asked a username and pass
  the problem is that it is on a network of "domain".
  my sisters work
  I don't know the right pass n to enter
  because I thought it was the same as logging in
  What is the way of eaiset to find it?
  given that I can't create an ERD that I can't confirm
  with pass and username
  What is possible to do?
  Thank you

  You actually painted yourself in a corner Downshifting your one and only one administrator account and burning is not a repair CD Windows before badly started. Here's how you can solve the problem:

  1. Burn a CD of Windows repair on the machine from a friend via the control panel / backup and restore. It takes less than five minutes.
  2. Set your BIOS so that it uses the DVD drive as its primary boot device.
  3. Start the computer with your Windows 7 repair CD.
  4. Press a key when prompted to boot from the DVD.
  5. Select 'PC Repair' in the menu.
  6. Select 'Repair' when prompted.
  7. When you are prompted, select System Restore.
  8. Configure Windows to a point before downgrade you your account.
  9. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Can someone download programs from the internet by using a standard user account?

  My grandchildren use my computer, & they like to download & install games on internet, but I don't want that they are able to do with my computer. I need to know if using a standard user account will stop to do that. Thanks for the help.

  Yes, they can still download programs but may not be able to install them. An easy way to check is to create the account, connect to it and try it and then you will know for sure.

  I hope this helps.

• Two standard user accounts

  I bought a new computer with windows 7 Home Edition premium, the company put me as an administrator. I want two standard user accounts so at startup, either myself or my husband can go to their screen. How is that possible when I am currently the administator? Or how can I have both accounts come and we can decide what screen that is on the computer. I don't want the computer to go directly on my monitor as an administrator, I want the one that came on the computer to decide as we had on windows XP. Thank you

  Create two accounts, one for yourself, for your husband. Both accounts will be displayed on the logon screen. If in doubt, how to create accounts, click Start, click Help, and then search for help on "account".