Star Wars - 15-an001na: laptop Starwars

I just bought this laptop and I plan on the Exchange with a SSD 480 GB hard disk.
Is there some models of SSD that will work with this laptop. The model-checker on essential doesn't mean ion portable individual - which model should I enter for compatibility.

Then can I exchange the RAM easily and once again what should I look for.

Kind regards

Here is the Service Manual:

Manual

Hard p. 49 and p. 55 memory disk and either you have to remove the lower cover that can run against the guarantee. Just note and be careful. You can use any SSD on the market. My favorite is the Samsung 850 Evo but OCZ and Sandisk are good, too. It's a good deal on the Evo:

http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_1?ie=UTF8&QID=1456777132&SR=8-1&keywords=500+gig+SSD

I saw the category of 500 gig SSD as low as $120 maybe if you catch a super Blowout Sale but $150 for the Evo 850 is good enough.

After the back if you need installation software migration assistance /, and. Just treat the SSD as a hard drive replacement, and you will be OK. Any other material and no BIOS settings are necessary.

Module of memory (DDR3L-1600): 4 GB 8 GB 693374-005 691740-005

Memory max 16 gigs and it's the 8 2 gig chip you need:

http://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8&QID=1456777539&SR=8-1&keywords=693374-005

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • STAR WARS 15-an001na HP: slot m2 15-an001na HP STAR WARS SPECIAL EDITION?

    Hello.

    I would like to ask any SSD on my STAR WARS 15-an001na HP, but I can't find record of ditailed to see if the MB has additional location SATA or m2. Can u pls addvise.

    THX.

    Yes, he sees s. 53 of the Manual:

    Star Wars laptop manual

    Remove the bottom cover to access the slot, but it can take a drive SATA M.2 2280 mm module.

    If it's 'the Answer' please click on 'Accept as Solution' to help the other ifnd it.

  • Pavilion Notebook - 15 t-ab100: Hp star wars limited edition laptop

    I have a Pavilion Notebook - 15 t-ab100 CTO is therefore limited edition Star Wars with touchscreen a 2 TB hard drive. You want to swap hard drive on a 1 TB samsung SSD. Looks like the whole bottom is 1 piece. Not sure how he defeated hard disk access. You remove the screws of the hinge end monitor? When I removed all the screws from the bottom, the bottom base was still on tight at the top of the laptop. So not sure how it is apartment. Other features include a dvd player. Don't want no ro break my new laptop. I took cases for laptops out there before, but this one is a little trickier. Any info is appreciated.

    Hello

    Please download the manual below for your laptop and check page # 49, which shows how to remove the hard drive.

    http://h10032.www1.HP.com/CTG/manual/c04642845

  • 15 - an051dx: special speaker and backlit keyboard questions about Star War Edition

    Hi guys, I just bought Star War Special Edition laptop with B & O speakers. Is there anyway can I change that in order to get better sound quality on my laptop? In addition, the laptop comes with backlit keyboard, therefore is anyway can I adjust the timing for her? Thank you and have a nice day.

    Hi @StevenChau,

    Please use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number

    File number and phone number are displayed.

    They will be happy to help you immediately.

    You can say thanks for trying to help by clicking on the Thumbs Up below!

    Thank you.

  • Star Wars 15-an002ns: SSD installation socket m2

    Hello

    Recently I bought HP Star Wars Special Edition laptop for laptop - 15-an002n, which comes with 1 TB of HDD. I think it is too slow for the overall power of the rest of the components, and I intend to install a SSD for the OS. Consulted the manual, I see that the laptop has a blank m2 socket and some versions include an SSD there:

    M.2 SATA-3 (NGFF):
    ● SSD 256 GB, 2280, M.2, SATA-3, TLC

    I installed some other SATA III SSD, but never a type m2. My questions are:

    1 are there compatible with lower capacity models? I want to just install the OS here, so it would be enough with M.2 128 GB SSD.

    2 how the BIOS will recognize the new drive as primary drive? I need to change the settings?

    3. I alter anything else in the computer. This update will void the warranty?

    4 is recommended for installed the OS from scratch in the new drive or could I use disk clone software? In this case, which?

    Thanks in advance.

    Currently, there is a problem with end users not being able to get this empty housing to recognize a M.2 WSSD drive added after delivery to the details of the laptop. Technically, the trying to jeopardize the warranty but who never stops the hard core of the valuation. So for the time being, until HP provides an answer as to what is happening with m2 slots, I do not recommend that you do the upgrade. If you want to go faster, I recommend that you install a SATA 2.5 inch SSD in place and place of the mechanical hard drive. Even that, however, will show warranty issues.

  • Star Wars™ Special Edition: Restore my laptop

    I have a question about the restoration of my Hp laptop special from star wars edition. If I restore and have it remove all of the files and what not I lose all the features that came with the laptop? as the command centre which has all the star wars related functions and will it take me to get the driver for the led keyboard or anything? Thank you!

    on a side note, I want above all to restore it to return to its original speed and get all the space that I filled out back. I have only about 35 GB spread of TB thanks again!

    BradlyHawke wrote:

    I have a question about the restoration of my Hp laptop special from star wars edition. If I restore and have it remove all of the files and what not I lose all the features that came with the laptop? as the command centre which has all the star wars related functions and will it take me to get the driver for the led keyboard or anything? Thank you!

    on a side note, I want above all to restore it to return to its original speed and get all the space that I filled out back. I have only about 35 GB spread of TB thanks again!

    If you use the plant holder of HP recovery that it comes from the factory with which should be what is was, but if your not sure you need to contact HP support and ask them.
    Contact - HP customer support

  • I just got a computer g60 hp laptop with windows 7 and I can not star wars Knights of the old Republic 2 to work on this, I have tried everything, I saw that you answered someones question similar on this problem, but the answer did not help me

    When I start to play my game, it loads well, and it allows me to start a new game and customize a character and then I press start and it goes through the opening of star wars and then video when that ends, and is about to go to the actual gameplay it stops working, all it say is that the program has stopped working and stops , now as I said this very similar problem replied Web site someoones and you told them update their display driver that I tried and it still doesn't work, my graphics card is a mobile Intel (r) 4 series express chipset family, if this is useful, I also used the xp compatibility mode but that did not work either

    Andrew,
    KotOR II does not have to be compatible with Windows 7.  I suggest contacting the manufacturer of game and see if they have a patch or a patch for this game. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Special Edition of star wars: recovery failed

    Hello

    I have a laptop HP Star Wars Special Edition (15-an001na). After two days of its use for some reason windows stop responding and I coundt find a way to solve it so I tried a recovery of the plant. Manager of recovery is not so I can't do anyting with the laptop now. Any ideas how to solve this problem. Any help is appreciated. THX

    PS. So Exuse my English is bad

    Hi @Cornel_h,

    Welcome to the HP Forums!

    I read your post and wanted to help.

    I understand that the Recovery Manager doesn't have on your laptop. And your laptop crashes or hangs sometimes.

    You can start the laptop into Windows now? If the laptop is unable to start, try the last link on this document: HP - computers perform a recovery of the system (Windows 10) HP

    If you can start the computer normally, try the steps in this document: computers HP - computer crashes upward or freezes (Windows, 10, 8)

    If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

    Kind regards

  • Satellite C50-A-1 - game "Star Wars: the old Republic ' is lagging

    Hello

    I recently bought a Satellite C series. (C50-A-1 more specficly).
    Problem is when I downloaded star wars: the old Republic, the game lags badly.

    The graphics in the game are set in the lowest possible to minimize lags and yet I still get them. Here's some info of dxdiag, although they should be known for this type of laptop, I suppose that:

    OS: 64-bit windows 8.1
    Processor: 2.13 GHz (2 CPUs) (Intel, Celeron)
    memory: 4096 MB
    DirectX 11

    Please help with it as soon as possible thank you

    Have you already checked the hardware requirements to play this game smoothly?

    C50-A-1 satellite was equipped with an internal Intel HD graphics card.
    This GPU is part of the Intel CPU and to be honest, this isn t graphics card designed for purposes of games.

    To play games smoothly, you need a laptop nVIdia or ATI graphics cards.

  • star wars command center problems

    Hello, I just took possession of a portable star wars limited edition, I can open the command center, but I need to know how to raise R2D2 and the small figure in light, thank you very much

    Hi @garyrwhitaker,

    Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice. You have a rewarding experience, I would include the following link for your perusal and reference. First time here? Learn how to publish and more.

    I understand you've got a laptop HP from Star Wars limited edition. You can open the command center, but t you want to know how to make appear R2D2.  After some research, I believe you can do it by choosing one of the special themes Windows as we should be R2D2.

    Please let me know the results.

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem. "Think about scoring the post that solves your problem as" ","accept as Solution " to help other members of the community! To say thanks for the help, please click "Thumbs Up icon" below.

  • Star Wars edition an050nr: an050nr drivers

    Where can I get the drivers for Windows 7 64 for the portable edition Star Wars (15-an050nr)?

    When the drivers will be available? They will be available?

    Are there other sources for drivers that work?

    Am very pleased with the amount of data Windows 10 passes with no way to stop it.

    Hello:

    The last one that you listed is the security chip v 2.0 TPM which is not supported for W8 or earlier operating systems.

    So there is no drivers for this device, as they are only included in W8.1 and W10.  Having this device not installed will have no negative impact on the functioning of your laptop in W7.

    I'll post the links to drivers, according to me, you need in the order you posted the ID.  But first, install the smbus controller driver and restart.

    PCI\VEN_10EC & DEV_8136:

    3rd driver on the list...

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

    PCI VEN_8086 & DEV_3165:

    2nd driver on the list on the left side of the Web page...

    https://Downloadcenter.Intel.com/download/25510/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-

    Bluetooth driver for above wireless card...

    https://Downloadcenter.Intel.com/download/25319/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-7-64-bit

    PCI VEN_8086 & DEV_9D31 & PCI VEN_8086 & DEV_9D21 must also be installed by the smbus controller driver.

    PCI VEN_8086 & DEV_9D3A:

    FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72884.exe

    PCI VEN_8086 & DEV_9D23:

    FTP://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73137.exe

    ACPI\HPQ6007:

    FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71839.exe

  • Can I play Star Wars Battlefront 3 on my MacBook Pro?

    Hi, can someone tell me if I can play the PC of Star Wars Battlefront 3 on my MacBook Pro version?  Are there special requirements or can I download the program and play?  I have a MacBook Pro with a processor Intel Core i5 with 4G memory on the 2.5 G and a card Intel HD Graphics with 1 400 MB.  Thank you.

    All first if it's a PC game and you have not installed windows. N ° other you must go to the game site and look for the minimum specs for the game. Generally the minimum specifications"means that the system will work. but not as good as you want to. It can run on a Mac with Virtual PC installed, but I'm not sure. My daughter and my son built their own PC with graphics cards top of range to run PC games. Most laptop computers including windows are well with high-end video games.

  • Star Wars Special Edition Note: This system is not supported

    I need help for the Star Wars content on my laptop special edition of Star Wars.  I had to have my hard drive is erased after it got a virus and for some reason any now when I installed the Star Wars command center it tells me "this system is not supported. What should I do to get back what I lost and how do I get the command center working again?

    Hey @JudyInCT,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with Star Wars software on your laptop. I can help you with that, but I need the model number of your laptop first. You can find the model number in this link. Once I know that I will be better able to help you.

  • HP Star wars, model: 15-AN000: disable Intel Graphics

    Hello

    I have HP laptop special edition of star wars which has two Intel HD Graphics 520 and graphics Nividia 940 M.

    What I want is that completely disable the graphics card intel and using only nividia graphics card.

    First, I checked the bios to no possibility to do so, but found nothing.

    I've updated the bios and always this option isn't here!

    I want to completely remove chart intel from the Device Manager.

    Laptop model: 15-AN000NE

    OS: 10 64-bit Windows

    Help, please.

    Hello

    Please try NIVIDIA Control Panel as mentioned on the next post:

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/PC-is-using-Intel-graphics-instead-of-built-in-NVIDIA/m-p/5519758#M329296

    Please note: this consumes more battery and the machine may be hot.

    Kind regards.

  • Special Edition of star wars HP: Dvd rom starting up/reboot

    Hi everyone I recently bought the laptop HP star wars Special Edition and I just noticed each time I restart the laptop the dvd rom will make a noise happens also after it starts. Is this normal?

    @AntiMatter

    Forums can be with you

    I understand that DVD drive of the laptop makes a noise whenever you have be turn on or off.

    I need some clarification on a specific solution:

    What is excessive noise?

    When was the last time that you did not have this problem?

    Did you install updated BIOS, lately?

    Have you have performed the steps on your own before posting on the Forums of HP?

    If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
    If you like my assistance, please click on the thumbs up icon.
    The two icons are below this post.
     
    Have a good day Ahead.

Maybe you are looking for

  • Equium A200-1VO - replacement DVD player

    Hello I was wondering if someone could help me find a replacement of CD/DVD for a Toshiba Satellite A200-1VO. do I need to export the model exact same DVD player or is there another appropriate drive that works? I know how to mount the drive for the

  • try to install win 7

    Hi trying to install win 7 on my hp dv6 7228nr envy, when I reached the installation and press install now, it says that it needs drivers. I looked for answers, most said that I need to download the sata drivers. Help PLZ, if it is true, please give

  • I want to simulate linear incremental encoder to Labview FPGA

    Hi all I use the card to FPGA OR 7851-R to simulate incremental linear encoder. I want to generate the impetus A and B of the map to simulate the features of linear incremental encoder according to the distance. I don't know how to do so please help

  • HP 110-000z: Malwarebytes Anti-Malware or McAfee

    If I put Malwarebytes Anti-Malware on my pc. Need me too "McAfee or Norton" on this subject?

  • error messages and java help

    I tried to download the update and everything I get error 80072EFE id codes, 8024402C & 57 c please someone could explain why I get these messages, and why I can't load java it ask me again, but when I try it seems to load & then the next time I'm go