try to install win 7

Similar Questions

• "ntoskrnl.exe is open or running in an another program'when I try to install win xp sp3"

  original title:, ntoskrnl.exe is open or ongoing in another program, when I try to install win xp sp3 / error message/how do I find them to close

  How can I find these programs to close

  Hello

  1. What is the exact error message?
  2 - what you want to say that you receive this error message when you attempt to install service pack 3? If Yes, then try to install SP3 in clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Startand then click run.
  2. type msconfigand click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Please provide more specific information on the issue. This could help us help you better.

• A new system with a clean install of Win 7 64 bit Pro. Try to install win XP virtual machine.

  A new system with a clean install of Win 7 64 bit Pro.  Try to install win XP virtual machine. The virtual machine "put" file installs and then restarts.  During the configuration phase it reboots it gets 94% done gives a message 'update failed' and said that no files have been modified.  I redownlaoded the file and reinstalled several times.  I changed the bios to make sure that hardware virtualization is enabled.  All tests that microsft has said that my Machine is fine.  However I can not get the software\update of the virtual machine in order to install properly.  Any thoughts?  Thanks in advance.  Bruce

  Hi Bruce,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

   

  Hope this information helps.

• 70073712 error code when you try to install Win 7 SP1

  I am using Windows 7 32 bit on a machine with 4 GB of RAM 540 i3.

  I get error code 70073712 when trying to install Win 7 SP1 via windows update.

  I disabled all startup programs and services not microsoft.

  I ran the fix - it utility and update v10 system utility preparation x 86.

  I have still some errors on the log to check ON that I can't fix, I don't know if they help or not.  Log is shown below:

  =================================

  Preparation of control system was updated.

  Binary version 6.1.7601.21645

  Package Version 11.0

  2011-02-25 22:18

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifestx86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifestx86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifestx86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3

  (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifestx86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifestx86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifestx86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifestx86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6

  Summary:

  Seconds executed: 58

  Found 9 errors

  County of apparent CSI and S256H Do not Match Total: 2

  Manifest CSI has not catalog check the total count: 7

  Unavailable repair files:

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifest

  winsxs\manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifest

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifest

  winsxs\manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifest

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifest

  winsxs\manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifest

  winsxs\manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifest

  winsxs\manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifest

  winsxs\manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifest

  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Can anyone offer any help on solving this problem and get installed SP1, as I'm stuck now!

  Thank you

  Thomas

  
  

  Hello Thomas_Si,

  Thank you for your message.  Please, try the following steps:

  Since you have already downloaded and run the system update tool, you can move on to step 2.

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the details of each scan or utility. We can't wait to hear back on your part.

  See you soon

• How can I install Photoshop Elements? I get 0x80070BC9 error whenever I try to install Win 8.

  Whenever I try to install, I get the error indicated. Alorsh program intall cancels them the installation. Any help you can give would be appreciated. I'm under WIN 8 with all updates applied.

  Thank you very much.

  Hi jhboston1,

  Please follow the steps mentioned in the KB: http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html and let us know if it worked.

  Kind regards

  Romit Sinha

• Qosmio G30-163. Try to install Win Xp Pro on the new HARD 120 GB drive

  Hi all

  I am trying to install Win Xp Pro on a new 120 GB HARD drive, but windows setup does not recognize the HARD drive.
  I have only to install a (formatted) HARD drive on the laptop as main.
  The secondary place for HARD drive is empty.

  Can you please help me with this?

  Thank you in advance.

  Hello

  Rose is right you need RAID driver.
  Download from the Toshiba download page and load it before installation of WXP starts using the diskette drive/USB stick and F6 option.

  On this forum, you can find many threads with exact explanation how.

• try to install win xp 32 on lenovo x 220 already have win 7 pro 64

  I have windows 7 pro 64-bit installed. I try to install windows xp pro on my machine but to implement layouts site and you asked to select an external hard drive controller. If I select No. then it says no hard drive found if I say yes, it shows me a list of the drivers of the controller. I don't know what to do and what the problem is. Help, please.

  You must change the HDD setting in the BIOS in compatibility mode.

  I hope this helps!

• error message when you try to install win 7 on vostro v131

  Hello

  I bought and installed an SSD in my Dell Vostro v131 and when I tried to install windows 7 using a USB key, I get the following message and cannot continue with the installation.

  A required CD/DVD drive device driver is missing.  If you have a driver disk, CD, DVD, or USB flash drive, please insert it now.  Note: If the Windows installation media is in the CD/DVD drive, you can remove this step

  I created the bootable usb key by following these instructions:

  1. in Windows Vista or Windows 7, open a command prompt and run the following commands one by one:

  (a) Diskpart

  (b) the list disk

  You can identify your USB by its size. For example, there is disk 1.

  (c) select disk 1

  Select your USB drive.

  (d) clean

  Erase it.

  (e) create primary partition

  (f) select partition 1

  (g) active

  Mark this partition as a boot partition active. This will allow this bootable USB key.

  (h) format fs = ntfs quick

  2. after formatting the Flash DRIVE, copy all the files in the DVD on USB drive

  I copied the contents of the DVD of the OS that came with the v131 when I bought it.

  Win 7 Home Premium 64-bit SP1

  I installed Win 7 on my desktop the same procedure and I have never seen this message before...

  Anyone can shed some light on this problem?

  Thanks in advance!

  I saw a post elsewhere that this problem is due to the use of the USB 3.0 port during installation of operating system with a flash drive.

  I plugged the USB in the por USB 2.0 and that solved the problem.

  Hope this helps your problem!

• I try to install win 7 pro on a new drive and it asks me to install a driver

  I installed a new hard drive WD10EALX, Sata/32 MB Cache in my SR1630NX compac computer. When I click on install Win 7 pro, the software works until it reaches the point where he wants me to install a driver. What is missing? Which driver?

  His search for the sata/raid controller that is used by your motherboard.

  Looking for the HP site, it seems that the PC was origonally provided with Windows XP and as such may not be compatible win7

• try to install win 2000 in VMWARE.

  IM at the post install phase, still being installed and wants the SP2 disk to continue

  you are prompted for SP2 disc, all I have is the w2ksp2.exe file,

  any ideas how I can extract the files for files SP.exe?

  Hello

  I suggest you to contact VMware and check.

  http://www.VMware.com/support/

• Try to install Win 7 for the first time

  Hello, I built my own computer and want to install windows 7 on it. I currently have 4 disks (3 are disconnected and they have a full installation of linux on them). I have windows 7 on a USB key, but when I get to the screen "Where would you install Windows?" I select the single partition it is (which I formatted) and click Next. An error "Setup was unable to create a new system partition or to locate and existing system partition." See logs of installation for more information". What should I do?

  Check that your drive is not connected to a SATA RAID port as SATA RAID ports may require that you use the F6 option when you install Windows in order to install the driver of chip RAID from a USB / Flash drive or DVD drive.

  J W Stuart: http://www.pagestart.com

• Install Win 2000 on Tecra S2 - peripheral unknown

  Hello

  I try to install win 2 k on my Tecra S2.
  I have download all the drivers and I have read the order of installation, but now I have an unknown PCI device.

  I try to check all devices such as:
  -Modem
  -Lan card
  -Wireless network card
  -Card bus
  -Audio

  etc etc (including the irda driver, mobile extension, power save the driver driver touchpad...)

  I also try to re install all the driver but I ' have already the unknown PCI, the only factor device that I have not installed is the Bluetooth.

  Please can someone help, please

  The only solution for you to find your way through this download one
  Freeware called "Unknown device identifier" of this site: http://www.zhangduo.com/udi.html

  This program will allow you to easily locate the correct device description as well as the
  pilot coresponding.

  Hope this will sort things

  Concerning

  chain

• Satellite L50 - A - 1 d 5 - can't install Win 7 (32-bit or 64-bit)

  Hi guys.

  Very strange problem when I try to install win 7.
  I changed the bios to start from the cd and it works great.

  After that the windows 7 installed to finish, reset the laptop and when the witness appears it is just Windows 7 freeze. (keep moving but nothing happened).

  I already tried 3 versions of windows 7 and still the same problem.
  I also use Capitol via Hiren and I cleaned the hard drive and installed again but... the same due problen.

  any suggestions?
  Thank you very much

  What BIOS settings you changed exactly?
  Usually, you will need to disable secure boot and have spend the the CSM UEFI boot mode.

  By the way: have you used the Microsoft original own installation CD to install the system, or have you used a backup for the installation of the OS image?

• Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has

  Hello
  When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
  When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.

  At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?

  Hello

  Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.

  However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.

  Check it out!

• Pavilion G4-2029wm (AMD, Win 7 x 64): cannot detect some drivers after installing Win 7 Home Premium

  Dear supporter.

  I try to install Win 7 Home Premium X 64 on HP Pavilion G4-2029wm.

  After the installation is complete, Windows cannot detect some drivers, inclucde: USB (USB universal..), Wifi, LAN,...

  Plz help me solved this problem.

  Thanks & best regards,

  Ongto wrote:

  Dear supporter.

  I try to install Win 7 Home Premium X 64 on HP Pavilion G4-2029wm.

  After the installation is complete, Windows cannot detect some drivers, inclucde: USB (USB universal..), Wifi, LAN,...

  Plz help me solved this problem.

  Thanks & best regards,

  If you installed the Windows operating system without using the HP recovery media, then you will need to download and install all the drivers missing/software separately.

  Here is the link to the download page for your laptop: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5273741